Used Erika 60 for sale (21,381)

Condition: new, Our SAPI "Mammut" pressure blasting unit with a 60-liter tank capacity is suitable for all common blasting media. The blasting pressure can be continuously adjusted from 0.1 to 12 bar using the permanently installed pressure regulator. A water separator is also permanently installed on the blasting unit; this separates moisture from the compressed air and prevents the blasting media from clumping due to excessive moisture. Our safety shut-off device is included for safe operation of the sandblaster. This starts and stops the blasting process by operating the hand lever mounted on the blasting hose. Included in delivery: SAPI pressure blasting unit "Mammut 60 L" 1" pressure regulator, permanently mounted 1" water separator, permanently mounted SAPI safety shut-off Technical specifications for the pressure blasting unit: Precisely adjustable from 0.1 - 12 bar TÜV-tested with certificate 1" fixed piping, internal and external Rubber-coated metal cone with rubber seal Generous hand hole Rubber-coated metal cone with rubber seal Large hand hole Rubber-wheeled chassis Ncedpfjwc Afhex Aiysu Abrasive dosing valve (suitable for all common blasting media) Capacity 60 l Total height 1,130 mm Bowl diameter 360 mm Total diameter 700 mm Weight approx. 60 kg ADVANTAGES OF THE SAPI PRESSURE BLASTING UNIT with safety shut-off Fast shut-off and start-up times, while complying with the regulations of the professional associations (VBG 48) Pressure setting Can be precisely adjusted before the actual blasting process, continuously adjustable from 0.1 to 12.0 bar. Reduced abrasive consumption, as the pressure vessel remains permanently pressurized, thus eliminating unnecessary abrasive run-on. Upon restart, the full blasting pressure is immediately available at the nozzle and does not need to be slowly built up. This significantly reduces abrasive consumption and significantly reduces wear on the blasting hose. No moisture (condensate) builds up in the vessel, as the vessel remains constantly pressurized and is not vented and vented with every start and stop. This process also offers other advantages, such as: Optimal abrasive dosing with a hardened fine dosing valve Lower compressed air consumption, thus significantly reducing fuel consumption (diesel) One-person operation, as the blasting pressure is constantly displayed by the vessel pressure and can be easily adjusted on the pressure gauge without prior start-up. No failure-prone components such as control valves, diaphragms, or seals, making it easy to maintain and reliable. Only the blasting hose needs to be checked in the safety shutoff and replaced if necessary.

Condition: like new (used), Year of construction: 2018, functionality: fully functional, Set for robotic laser welding Nsdpfjrfucfex Aiyecu Scope of supply: 1 x Laserline LDM1200-60 (1320W).(2011). 1 x 2 Way Hyfra CHILLER.(2018). 1 x HIGHYAG LASER WELDING HEAD. Machine can be inspected. Very good condition. Connected, can be tested. Shipping to EU countries is our responsibility and the shipping cost is free.

Condition: new, Year of construction: 2026, functionality: fully functional, *All of our products are made with care and covered for 1 year warranty! *Installation and Operator Training FREE Ncodpfxey H Aizj Aiyou • Model: FABO HY-600 • Type: Double Helix Screw Washer • Capacity: 60 ton per hour • Dimension: 1400 x 6650x1800 mm • Screw Size: Ø 600x6000 mm • Speed: 22 rev/min • Motor: 2 x 5.5 kW Heavy duty Gamak • Water Consumption: 55-205 m3 • Including chassis, motor and safety guards. FOR FURTHER INFORMATION PLEASE FEEL FREE TO CALL US!!!

Condition: ready for operation (used), functionality: fully functional, machine/vehicle number: JUN4607, Year of construction: 2006, operating hours: 8,835 h, load capacity: 6,000 kg, lifting height: 4,000 mm, fuel type: diesel, empty load weight: 9,160 kg, TECHNICAL DETAILS Load capacity: 6,000 kg Lifting height: 4,000 mm MACHINE DETAILS Unladen weight: 9,160 kg Nodpfx Aszdqv Isiyscu Fuel type: Diesel Engine power: 61.5 kW at 2,200 rpm Operating hours: 8,835 h

Condition: ready for operation (used), Year of construction: 1972, functionality: fully functional, grinding length: 4,000 mm, grinding width: 500 mm, spindle speed (max.): 1,400 rpm, overall weight: 11,000 kg, TECHNICAL DETAILS Max. grinding length: 4,000 mm Max. grinding width: 500 mm Max. distance between table and spindle center: 900 mm Table speed: 3 - 25 m/min Spindle speed: 1,400 rpm Grinding spindle motor: 11 kW Ncjdezd Rqlspfx Aiysu Dimensions of magnetic clamping plates: 4 x 1,000 x 500 mm MACHINE DETAILS Weight: approx. 11 tons EQUIPMENT Including complete electrical system Permanent magnet plate Cast iron bed (overhauled in 2011) New hydraulics and digital Z-axis Swiveling spindle

Year of construction: 2023, condition: excellent (used), functionality: fully functional, machine/vehicle number: IC840722100 / IC200981, REF: MM6175 1 x Cattabriga Crem-O-Matic KEL 60 multifunctional batch pasteuriser. This machine produces dense, creamy, and smooth desserts batch after batch, ensuring optimal overrun and texture. It's built for durability and ease of cleaning. Typical products - custard, tempered chocolate, pastry creams, gelato mixes, etc. Technical specification ⚙️ ✅ Manufacturer - ICETEAM 1927 Cattabriga. Ncedpfxew Hxhms Aiysu ✅ Model - Crem-O-Matic KEL 60. ✅ Serial number - IC840722100 / IC200981. ✅ Year of manufacture - 2023. ✅ Batch size range - 26 litres to 52 litres. ✅ Average time per cycle - 120 minutes. ✅ Heating - Indirect. ✅ Power - 380-415 | V 5.5kW | 10A. ✅ Refrigerant - R-134A 1Kg. ✅ Dimensions - Width: 600 - 700 mm | Depth: 1000 - 1100 mm | Height: 1400 - 1500 mm ✅ Weight - 400 Kg (Appx). Typical applications 🍨 Artisan Gelaterias - The primary user, producing authentic Italian gelato with superior texture and flavour. High-End Restaurants & Hotels - For creating bespoke desserts and fresh ice creams in-house. Patisseries & Bakeries -  Expanding their dessert offerings with high-quality ice cream and sorbets. Specialty Food Producers - Manufacturing small to medium batches of premium ice cream or sorbet for retail or foodservice.

Condition: good (used), Year of construction: 2001, functionality: fully functional, machine/vehicle number: 589-0263, Make Illig Model VHW 60/2 Year 2001 Condition Good Number of Heating Rolls Two Max material width 610 mm Max material thickness 1.8 mm Max temperature of heating rolls 140 °C Material wrap around 563 Grad Total connected load 36.0 kW Dimensions 2300 x 1400 x 2400mm L x W x H (300kg) Njdpfxouzi I Ee Aiyscu All details are subject to change and/or errors. All equipment is subject to availability and/or prior sale

Condition: good (used), mileage: 16,714 km, first registration: 11/2024, fuel type: electric, tire size: 225/55R17, axle configuration: 4x2, wheelbase: 3,430 mm, fuel: electricity, color: white, driver cabin: day cab, gearing type: automatic, number of seats: 2, total length: 5,370 mm, total width: 1,930 mm, total height: 2,050 mm, loading space length: 2,700 mm, loading space width: 1,650 mm, loading space height: 1,310 mm, Year of construction: 2024, Equipment: ABS, Bluetooth, air conditioning, central locking, cruise control, electric window regulation, navigation system, parking heater, power mirror, seat heater, traction control, = Additional Options and Accessories = - Halogen lamp - None - Alloy wheels - Manual - Radio/cassette - Rear view camera - Lane keeping assist - Fabric - Blind spot sensor - Partition = Notes = Configuration: 4x2, Payload: 987 kg, Unladen weight: 2213 kg, Gross vehicle weight: 3200 kg, Alloy wheels, Type of cab: Single cab, Cruise control, Air conditioning, Number of airbags: 2, Auxiliary heater, Parking assistance: None, Electric windows, Electric mirrors, Partition, Radio/cassette, GPS navigation, Color: White, Rear view camera, Lighting type: Halogen lamp, Lane keeping assist, Air conditioning, Seat heating, Bluetooth, Blind spot sensor, Fuel: electric, Transmission type: Automatic, Power steering, ABS, ASR, Starter battery, Body type: additionally extended, Side wall paneling, Roof rack: None, Central locking, Number of seats: 2, Seat arrangement: 1+1, Seat cover: Fabric, Seat adjustment: Manual, XL Vebabox with automatic transmission, Tire type: Winter tires Nedpjyzmh Refx Aiyjcu = Additional Information = Axle configuration Tire size: 225/55R17 Brakes: Disc brakes Suspension: Coil spring suspension Axle 1: Tire tread depth left: 6 mm; Tire tread depth right: 5 mm Axle 2: Tire tread depth left: 5 mm; Tire tread depth right: 6 mm Weights Unladen weight: 2,213 kg Payload: 987 kg GVW: 3,200 kg Functional Height of loading area: 55 cm Maintenance APK (Technical Inspection): valid until 11/2028 Condition Technical condition: good Optical condition: good Damage: none Number of keys: 2 Financial Information Leasing price: 530 € per month (delivery van, 72 months); Ask for more information and conditions Identification License plate: V-12-JBG

Condition: used, Year of construction: 2019, functionality: fully functional, machine/vehicle number: ITJ291580, power: 15 kW (20.39 HP), Equipment: compressed air system, compressor, type plate available, The Chicago Pneumatic CPVSD20 UL compressor is a 15 kW lubricated industrial unit, ideal for various applications requiring a working pressure of up to 10 bar. Although it is a used unit, this device is designed to deliver reliable and long-lasting performance in a demanding industrial environment. Chicago Pneumatic compressors are known for their energy efficiency and their ability to adapt to fluctuating compressed air needs, thanks to their advanced control system. The CPVSD20 UL model, in particular, offers an excellent balance between power and economy, making it a wise choice for users seeking to combine performance and reduced operating costs. By choosing this compressor, you benefit from a robust and proven machine, ready to be integrated into your production line or used in specific applications requiring constant pressure. It is an investment that goes hand in hand with reliability and quality, thereby ensuring uninterrupted operation for your industrial processes. Nodpfx Aiszfzagoyjcu

Condition: used, functionality: fully functional, maximum load weight: 27,000 kg, overall weight: 8,809 kg, axle configuration: 3 axles, first registration: 12/2020, total length: 14,040 mm, total width: 2,600 mm, suspension: air, color: white, Year of construction: 2020, Equipment: cooling unit, full service history, power assisted steering, Technical specifications Cooling unit - THERMO KING SLXi 300, diesel and electrical Axles producer - SCB Full air suspension Insulated double rear doors with 4 steel lockrods FP insulated sidewall, 60 mm Plastic toolbox with cover holder Fuel tank, 245 l Electronic brake system EBS Anti-lock braking system ABS ROTOS SCB (disc brakes) Thermometer Insulated ventilation flap in the left hand rear door Contact switch for rear door Aluminium barley seed floor Basket type spare wheel carrier for 2 wheels Spare wheel (6+1) tyres - 385/65R22.5 (11.75x22.5) Loading capacity 33 euro paletts Ncsdpfezgry Tsx Aiyju Length/width/heigth - 1341cm/246cm/265cm Gross vehicle weight - 39 000 kg Approximate own weight - 8 410 kg 3 axles Pallet rack for 36 Euro pallets TrailerConnect S.KO COOL country package wave 3

Condition: used, functionality: fully functional, maximum load weight: 27,000 kg, overall weight: 8,813 kg, axle configuration: 3 axles, first registration: 11/2020, total length: 14,040 mm, total width: 2,600 mm, suspension: air, color: white, Year of construction: 2020, Equipment: cooling unit, full service history, power assisted steering, Technical specifications Cooling unit - THERMO KING SLXi 300, diesel and electrical Axles producer - SCB Full air suspension Insulated double rear doors with 4 steel lockrods FP insulated sidewall, 60 mm Plastic toolbox with cover holder Fuel tank, 245 l Electronic brake system EBS Anti-lock braking system ABS ROTOS SCB (disc brakes) Thermometer Insulated ventilation flap in the left hand rear door Contact switch for rear door Aluminium barley seed floor Basket type spare wheel carrier for 2 wheels (6+1) tyres - 385/65R22.5 (11.75x22.5) Variable height double deck with 22 ALU beams Loading capacity 33 / 66 euro paletts Length/width/heigth - 1341cm/246cm/265cm Gross vehicle weight - 39 000 kg Njdpfx Aijy R T I Njyocu Approximate own weight - 8 682 kg 3 axles Pallet rack for 36 Euro pallets

Condition: excellent (used), Vötsch Type: LTU 60/60 Njdpfx Aozg Tpvoiyocu Heraeus Vötsch dryer for coating materials Maximum concentration of flammable substances: 40% of the lower explosive limit (LEL) Maximum temperature of the heating surface: over 750 °C Device description: Technical data: Internal volume (usable volume): 0.216 m3 Internal dimensions: Width 600 mm, Height 600 mm, Depth 600 mm External dimensions: Overall width 796 mm, Height 1725 mm, Depth 850 mm Load capacity / Payload Total roller track capacity: 55 kg Loading height above the installation floor: 820 mm Weight (net): 275 kg Minimum exhaust air volume flow: 96 m3/h Purge time (5 air changes): 90 sec. Recirculation volume flow (enhanced): 33 m3/h Total steam volume: 0.414 m3 Sound pressure level (according to DIN 45635): < 70 dB(A) Cut-out temperature Temperature limiter (TL) fixed at 300 °C Temperature selector limiter (TSL) adjustable above the rated temperature: 20 Temperature safety class (according to EN 60519-2) Temperature limiter (TL): 1 Temperature selector limiter (TSL): 2 Rated temperature: 200 °C Electrical data Rated voltage / Frequency: 400V, 3/(N)PE, AC 50/60 Hz Rated current: 12.0 A Rated power: 6.0 kW Connected load: 7.0 kW Weight: 275 kg Condition: used Scope of supply: (See image) (Subject to changes and errors in the technical data and specifications!) We will be happy to answer any further questions you may have by phone.

Condition: excellent (used), Vötsch Type: LTU 60/60 Heraeus Vötsch dryer for coating materials Maximum concentration of flammable substances: 40% of the lower explosive limit (LEL) Maximum temperature of the heating surface: over 750 °C Device description: Technical data: Internal volume (usable volume): 0.216 m3 Internal dimensions: width 600 mm, height 600 mm, depth 600 mm External dimensions: overall width 796 mm, height 1725 mm, depth 850 mm Load capacity / payload Total roller track capacity: 55 kg Loading height above the installation floor: 820 mm Weight (net): 275 kg Minimum exhaust air flow rate: 96 m3/h Purge time (5 air changes): 90 seconds Enhanced recirculation air flow rate: 33 m3/h Total steam volume: 0.414 m3 Sound pressure level (according to DIN 45635): < 70 dB(A) Cut-out temperature Temperature limiter (TL) fixed setting: 300 °C Adjustable temperature selector (ATS) adjustable above the rated temperature: 20 Temperature safety class (according to EN 60519-2) Temperature limiter (TL): 1 Adjustable temperature selector (ATS): 2 Rated temperature: 200 °C Electrical data Rated voltage / frequency: 400V, 3/(N)PE, AC 50/60 Hz Rated current: 12.0 A Rated power: 6.0 kW Connected load: 7.0 kW Weight: 275 kg Ncsdszg Tppjpfx Aiysu Condition: used Scope of supply: (See image) (Changes and errors in the technical data are subject to change!) We will be happy to answer any further questions you may have by phone.

Condition: used, functionality: fully functional, maximum load weight: 27,000 kg, overall weight: 8,809 kg, axle configuration: 3 axles, first registration: 09/2019, total length: 13,400 mm, total width: 2,460 mm, suspension: air, color: white, Year of construction: 2019, Equipment: cooling unit, full service history, power assisted steering, Technical specifications Cooling unit - THERMO KING SLXi 300, diesel and electrical Axles producer - SCB Full air suspension Insulated double rear doors with 4 steel lockrods FP insulated sidewall, 60 mm Plastic toolbox with cover holder Fuel tank, 245 l Electronic brake system EBS Anti-lock braking system ABS ROTOS SCB (disc brakes) Thermometer Insulated ventilation flap in the left hand rear door Contact switch for rear door Ncjdpfx Aezf E Nljiysu Aluminium barley seed floor Basket type spare wheel carrier for 2 wheels (6+1) tyres - 385/65R22.5 (11.75x22.5) Loading capacity 33 euro paletts Length/width/heigth - 1340cm/246cm/265cm Gross vehicle weight - 39 000 kg Approximate own weight - 8 410 kg 3 axles Pallet rack for 36 Euro pallets

Condition: excellent (used), Weiss Type: WKL 34/60 Weiss Climate Chamber, Air-Cooled Refrigerant converted to R-452A -60°C to 150°C Volume: 34 liters Installed in basic configuration: R1 NW 50 mm L1NW 120 mm Internal dimensions: Height 310 mm, Width 324 mm, Depth 300 mm External dimensions: Height 1740 mm, Width 630 mm, Depth 970 mm Performance data for temperature tests: Temperature range -60 to +150 °C Temperature differences in steady state, according to IEC 60068-3-5 Temperature fluctuation over time in the center of the usable space ± 0.3 to ± 1 K ± 1 to ± 2 K Temperature deviation spatially (corresponds to temperature gradient) 2 to 4 Temperature change rate (according to IEC 60068-3-5) Heating 2.5 K/min Ncodpfszgr U Rjx Aiyju Cooling 3 K/min Heat compensation max. 550 W Performance data for climate tests: Temperature range +10 to +95 °C Humidity range 10 to 98 % RH Temperature and humidity differences (in steady state, according to IEC 60068-3-5) Temperature fluctuation over time in the center of the usable space ± 0.3 to ± 0.5 K Temperature deviation spatially ± 0.5 to ± 1.5 (corresponds to temperature gradient) 1 to 3 Humidity fluctuation over time in the center of the usable space ± 3 to ± 5 % RH Operating data: Test chamber lighting Halogen bulb 12V, 20W Rated voltage 1/N / PE AC 230 V ± 10 % 50 Hz Rated power 2.5 kW Rated current 11 A Fuse on customer side 16A slow-blow Heat dissipation of air-cooled test chambers Max. heat dissipation to the environment 1700 W Refrigerant: R-452A / R23 Weight: 140 kg For your safety as a buyer, please note the following: The following points are carried out on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. If necessary, refill with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers are subjected to a documented test run. Condition: used Scope of delivery: (See image) (Changes and errors in technical data are subject to change!) We will gladly answer any further questions you may have over the phone.

Year of construction: 2026, condition: new, functionality: fully functional, Conical laboratory single-screw extruder EX 60/30 The extruder is designed for processing light, free-flowing granular materials. Due to its screw size, the extruder is suitable for laboratory and testing applications. The nitrided screw with a conical inlet section is fed with materials via a hopper, which then flow through the large inlet opening into the cylinder. Subsequently, the raw materials are compressed in the cylindrical screw section and discharged through a die. A direct drive with an upstream thrust bearing forms the drive train. Ceramic heating bands also allow for high processing temperatures. A shielding cooling system is installed between the material hopper and the first heating zone. Optionally, we also offer the following machines: The strands are passed through a water bath with a stainless steel tank to the strand granulator. A screen changer can also be offered as an option between the extruder and the die. Ncjdpfx Aozhamwoiysu Screw speed 150 Current 29.5A CEE-63A

Condition: good (used), Year of construction: 2008, Used 6000 x 2000 mm plasma cutting machine from HPM (Italy) Type: GV 60 20 Table dimensions: 6000 x 2000 mm Hypertherm 130 XD with Truehole option New Hypertherm EdgeConnect CNC control + new servo motors Modesta extraction system Includes spare parts Year of manufacture: 2008 CNC control renewed in: 2018 Nsdpfx Aijzd Ur Tsyocu

Condition: good (used), Linde Cryoflex CTFA4-60 Cryogenic Freezer Serial: 3002097/2 Ncedpfx Aowbnvcjiyou 2011, This continuous conveyor belt in a sub-zero tunnel was developed specifically for operators keen to avoid unnecessary handling and transportation of parts requiring sub-zero treatment. The CRYOFLEX® T freezer can be easily integrated into continuous hardening lines. It is well suited to mass production of small or thin parts such as injectors, springs, nuts and bolts. The standard temperature range extends from room temperature to -110°C (-166°F), Stainless mesh belt dimensions 4000mm x 600mm, 3Ph

Condition: used, functionality: fully functional, maximum load weight: 27,000 kg, overall weight: 8,809 kg, axle configuration: 3 axles, first registration: 01/2021, total length: 14,040 mm, total width: 2,600 mm, suspension: air, color: white, Year of construction: 2021, Equipment: cooling unit, full service history, power assisted steering, Technical specifications Cooling unit - THERMO KING SLXi 300, diesel and electrical Axles producer - SCB Full air suspension Insulated double rear doors with 4 steel lockrods FP insulated sidewall, 60 mm Plastic toolbox with cover holder Fuel tank, 245 l Electronic brake system EBS Anti-lock braking system ABS ROTOS SCB (disc brakes) Thermometer Insulated ventilation flap in the left hand rear door Contact switch for rear door Aluminium barley seed floor Njdpfezd Afnox Aiyecu Basket type spare wheel carrier for 2 wheels (6+1) tyres - 385/65R22.5 (11.75x22.5) Loading capacity 33 euro paletts Length/width/heigth - 1341cm/246cm/265cm Gross vehicle weight - 39 000 kg Approximate own weight - 8 410 kg 3 axles Pallet rack for 36 Euro pallets

Condition: used, Year of construction: 2020, Diesinking / EDM Travel distance X: 600 mm Travel distance Y :420 mm Travel distance Z: 370 mm table size X: 750 mm table size Y: 550 mm max. workpiece size X: 950 mm max. workpiece size Y: 740 mm max. workpiece size Z: 450 mm max. electrode weight: 50 kg max. workpiece weight: 1500 kg electrode changer: 32 - time C-axis generator: 60 Ampere cooler drop tank Njdpezg T Ewsfx Aiyocu C-Axis 32-position Electrode Changer

Condition: used, Year of construction: 2000, Diesinking / EDM Travel distance X: 825 mm Nedpfx Aevtfn Ujiyocu Travel distance Y :680 mm Travel distance Z: 405 mm table size X: 1200 mm table size Y: 850 mm max. workpiece weight: 3000 kg electrode changer: 50 - time Generator POCON 60 Quill holder: EROWA heavy duty adapter O module halogen light

Condition: ready for operation (used), * Brand: Metso * Type: FS 283 , for wet screening. * Surface: 6000 x 1600 mm - 3 decks. * Incl.: 37 kW E-motor and outlet trough. * On stock: 3 pieces. Nsdjzd U Hkjpfx Aiyecu

Condition: ready for operation (used), * Brand: Metso Njdezd Uz Iepfx Aiyjcu * Type: FS 403 , for dry screening * Surface: 6000 x 2500 mm - 3 decks. * Incl.: 55 kW E-motor and outlet trough. * On stock: 1 piece.

Condition: excellent (used), functionality: fully functional, Year of construction: 2010, operating hours: 8,806 h, load capacity: 4,000 kg, lifting height: 4,450 mm, free lift: 150 mm, load center: 500 mm, fuel type: electric, mast type: other, construction height: 3,150 mm, battery capacity: 870 Ah, remaining battery capacity: 80 %, battery voltage: 80 V, DGUV certified until: 06/2027, fork length: 2,400 mm, Equipment: CE marking, UVV, cabin, full service history, lighting, sideshift, Still RX 60-40 electric forklift with the following specifications: Lifting capacity: 4,000 kg Lifting height: 4,450 mm Overall height: 3,150 mm Year of manufacture: 2010 Operating hours: 8,806 STILL 4.0-tonne electric forklift with full cab and heater, battery at 80%, good tires (rear tires new), telescopic mast with clear view, side shift, 4th valve, lighting compliant with StVZO (German Road Traffic Licensing Regulations), fork length 2,400 mm (other fork lengths available on request), charger. Nsdpfx Aisyuaglsyjcu Additional attachments such as fork positioner, rotator, etc. available upon request. Price ex works, including 1,000 hours of service according to STILL manufacturer’s specifications and a valid FEM (UVV) inspection upon sale. Inspection, demonstration, and test drive available upon request by phone. Sale is exclusively to commercial businesses; subject to prior sale, errors, and typographical errors. We can deliver your new forklift cost-effectively with our own ramp-based low-bed trailer (transport costs on request). Further information about us and other offers can be found on our newly designed website!

Condition: excellent (used), functionality: fully functional, Year of construction: 2012, operating hours: 3,798 h, load capacity: 4,000 kg, lifting height: 4,650 mm, free lift: 1,650 mm, load center: 500 mm, fuel type: electric, mast type: triplex, construction height: 2,350 mm, battery capacity: 930 Ah, battery voltage: 80 V, DGUV certified until: 06/2027, fork length: 1,500 mm, Equipment: CE marking, UVV, cabin, full service history, lighting, sideshift, Still RX 60-40 electric forklift with the following specifications: - Operating hours: 3,296 - Lifting capacity: 4,000 kg - Lifting height: 4,650 mm Ncodpfxezfx Alj Aiysu - Overall height: 2,350 mm - Year of manufacture: 2012 STILL 4.0-ton electric forklift with a full cabin, good battery, good tires, triplex mast with full free lift, side shifter, 4th valve, four-lever control, lighting compliant with German Road Traffic Regulations (StVZO), fork length 1,500 mm, charger Price includes service according to STILL manufacturer specifications and a valid accident prevention regulation (UVV) inspection at the time of sale. The following options are available upon request: - Additional attachments (fork positioner, rotating fork, etc.; surcharge on request) - Different fork length (no extra charge) - Black instead of white tires (no extra charge) Inspection, demonstration, and test drive are available by telephone appointment. Sale is exclusively to commercial businesses; subject to prior sale, errors and omissions excepted. We can deliver your new forklift cost-effectively with our own ramp-equipped low-loader (transport costs on request). Further information about us and other offers can be found on our website.