Other

linde P 60 Z Schlepper Batterie 10/2020 3-Rad

Condition: used, Electric welding machine, stick electrode welding machine ESAB Type LTG 250 Machine No. 736-820-387 Year of manufacture 1997 Output: 250 Amps = 35% duty cycle 190 Amps = 60% duty cycle 150 Amps = 100% duty cycle Output setting: stepless - Electrode holder with 6-meter connection cable - Direct current - Fan-cooled Gbsdpfod N E Rvjx Aiveu - Optional, TIG welding is also possible, without hose pack Mains connection: 380 Volts, 50 Hz, 32 Amp plug Space required L x W x H: 1200 x 750 x 1050 mm Weight: 180 kg Good condition The unit was originally also designed for TIG welding. The hose pack for TIG welding is not included, and the function has not been tested. The water cooling was for the hose pack for TIG welding. Therefore, the unit will only be sold as a stick electrode welding machine. The welding test with stick electrodes yields very good results.

Condition: good (used), Year of construction: 1998, machine/vehicle number: 0618019, Offer 24589 Technical data: - suitable for welding steel, aluminum, special metals, Cr Ni, etc. - welding current 450 A 60% ED - 360 A 100% ED - welding current adjustable from 3 A - 450 A - Synergic setting control FRONIUS - water cooling device FRONIUS - separate wire feed case Gbjdpfx Aiovnb Tpjvou - intermediate package device - wire feed case 14 linear meters - 4 rollers wire feed continuously adjustable - MIG - MAG hose package water-cooled approx. 4 linear meters - ground cable - pressure reducer - mobile base frame - connection 400 V / 6.6 A / 8.7 kVA - space requirement approx. W 650 x H 900 + 450 x D 1100 mm - weight approx. 200 kg

Condition: used, Wig welding machine, DALEX, type GL/W 201 WIG welding machine Machine no.: 201, year of manufacture approx. 1995 Power: 200 amps, 35% duty cycle 160 amps, 60% duty cycle 120 amps, 100% duty cycle Gbodpfoi E Izvox Aivsu Adjustment range: stepless Type of current: DC - direct current Mains connection: 400 volts, 50 Hz, 5.9 kVA, 32 amp plug - 2-cycle and 4-cycle welding system - WIG hose set, 8 meters - HF ignition - Shielding gas pressure regulator - Electrode welding for coated electrodes - Fan cooling - Connection socket for foot switch (without foot switch) Space required L x W x H: 850 mm x 450 mm x 700 mm Weight: 90 kg The welding test yields very good results when welding stainless steel with direct current. Otherwise, the machine is in very good condition.

Condition: used, mileage: 158,032 km, power: 130 kW (176.75 HP), first registration: 04/1987, fuel type: diesel, overall weight: 11,500 kg, axle configuration: 2 axles, color: brown, gearing type: mechanical, Equipment: all wheel drive, Errors and prior sale excepted! Gjdpfx Aish Udydsvebu Internal number: 0633.2MY2407 ---- EQUIPMENT Frame for tarpaulin Flatbed All-wheel drive ... and more ---- The vehicle has not been refurbished! Nationwide delivery possible for an extra charge. Errors and prior sale excepted. We will gladly accept your vehicle as a trade-in. Financing/leasing also possible without a down payment! Do you have any further questions? We will be happy to advise you!

Condition: good (used), Year of construction: 1980, TIG welding machine Messer Griesheim GW 200 DC 400 Volt Gbodpfx Aetd Hhdsivju

Condition: new, – Capacity: M6-M36 – Electric – Touch screen – PLC control Gbjdpfx Asi Iwf Hoiveu – Variable speed control – Working area: 1200 mm – Quick-change tool holder – Includes 13 tapping heads – Documentation – 230V – Work table not included (additional cost for work table)

Condition: good (used), In this offer you acquire a used longbow feeder "Canon BDT VX 370". Item for sale: 1 x Canon BDT VX370 suitable for: Canon imagePRESS C10000VP Canon imagePRESS C8000VP Ricoh Pro C7100 Serie Ricoh Pro C9100 Serie Condition: This is a used unit and may show signs of use (minor scratches or yellowing). (minor scratches or yellowing). Gsdpfsl Axtgex Aivebu The unit has been tested for function Packing and shipping: You are welcome to view the unit during our business hours. Please make an appointment! Seaworthy packaging and worldwide shipping available upon request! Before shipment or collection, a function test will be recorded on video for you. For more information, you can of course also contact us personally.

Condition: used, Year of construction: 2009, saw blade diameter 350 mm capacity 90 degrees: round 120 mm capacity 90 degrees: square 110 mm capacity 90 degrees: flat 200x88 mm capacity 45 degrees: round 115 mm capacity 45 degrees: square 110 mm capacity 45 degrees: square 150x80 mm total power requirement 1,5/1,8 kW weight of the machine ca. 0,59 t Gbsdpfeyrhu Sox Aivsu dimensions 1,9 x 1,4 x 1,8 m Hydropneumatic Fully Automatic • Mitering Left/Right • Bevel cuts up to 45° (shifter) a. b. • Pneumatic double clamping device • Pneumatic vertical clamping device • Integrated coolant spray system MPS control: • Save cutting start/end position • Display of power consumption, piece count, cutting time, etc. • Adjustable water cooling • Cutting pressure regulator

Condition: new, driver cabin: other, gearing type: other, Vehicle location: en route / in transit Gjdpfxei Rqr To Aivsbu Design: self-priming water pump, self-lubricating with separate motor, dirty water pump, motor KD350 C5, air-cooled, max. flow rate 1800 liters/min (108 m³/h), pump head 17 m, protection class IP 23, self-priming, impeller made of graphite cast iron, spiral made of graphite, mechanical seal silicon carbide, centrifugal pump for supplying and draining, conveying highly contaminated media up to 20 mm particle size, standard equipment: sieve, screw connections, clamps, operating and maintenance manual, weight 90 kg Technical data: Max. flow rate: 1800 l/min (108 m³/h) Max. suction height in m: 8 Suction diameter (mm): 100 Discharge diameter (mm): 100 Particle size (mm): 20 Self-priming: yes Weight approx. kg: 90 Dimensions L x W x H in mm: 715 x 570 x 590 Motor type: 1-cylinder, 4-stroke S.V. Motor: KOHLER KD350 C5 Autonomy (h): 4.3 Fuel: Diesel Tank capacity (liters): 4.3 Starting system: Recoil starter Price varies depending on size! Suitable for water tank, see -6112-, -6113-. ACCESSORY INFORMATION WITHOUT GUARANTEE, subject to change, prior sale and errors!

Condition: new, functionality: fully functional, machine/vehicle number: WFDFLT33802037879, empty load weight: 3,250 kg, maximum load weight: 34,750 kg, overall weight: 38,000 kg, axle configuration: 3 axles, total length: 6,790 mm, total width: 2,550 mm, suspension: air, tire size: 385/55 R22,5", tire condition: 100 %, available in multiple units Chassis, semi-trailer, container Fine-grain steel welded construction, kingpin plate with replaceable 2" kingpin Container fittings: 1 x 20 ft, flush at the rear (Note: low drawbar load with 20 ft container) 24 tons, 2-speed landing gear, single-sided operation, with semi-circular base and straight connection plate, with stroke equalization 2 support wedges with holder Rear underrun protection, steel Spray flaps at the rear, covering the entire width Half-shell fenders with anti-spray flaps according to EC Storage box for fire extinguishers up to 6 kg Fire extinguisher (ABC powder 6 kg) incl. stainless steel drip tray in the center of the rear container crossbeam, approx. 290 mm wide Axles + Suspension BPW disc brake axles, with 430 mm disc diameter "Axles/chassis laser-aligned" - reduces tire wear and fuel consumption Axle spacing offset 1410/1310 mm (combined transport), up to 44 tons total weight Air suspension 1st axle, automatic lift axle, including forced lowering and start assist, activated by "pressing the brake pedal 3 times" (start assist is functional up to an axle load exceedance of 30% and up to a speed of max. 25 km/h) Braking system 2-line pneumatic braking system Color-coded line routing for easy servicing Spring brake parking brake 2 tamper-proof coupling heads at the front, without connecting line 24-volt EBS, electronic braking system with EBS socket at the front, without connecting cable Attention: The trailer may only be towed by towing vehicles that guarantee the effectiveness of the ABS! with lift and lower valve Vehicle - driving stability system Axle load detection via EBS-CAN bus signal, for display on the dashboard in the cab, truck must be prepared accordingly, no truck installation (no calibrated scale) Wheels and tires 385/55 R22.5", manufacturer at the discretion of the manufacturer Steel rims, factory silver Electrical system 24 volts, multi-chamber lights, yellow LED lighting on the sides 2 white position lights at the front in LED 2 white/red marker lights at the rear 1 x 15-pin socket at the front, without connecting cable Operating instructions The specified total weight is technically possible; depending on the cargo, the total weight may not be reached while complying with the permissible axle/support and drawbar loads. (Poor driving and handling characteristics possible due to incorrect load distribution) Country of registration/plates Germany with Dekra inspection and certificate (according to §13 EG - FGV) 24/7 service hotline prepared for single-row license plate holder Warning sign "A" for waste transport, foldable ADR approval according to FL/AT with ADR warning sign at the rear Contour marking with reflective strips according to ECE R 048, white on the sides and red at the rear Godpszbtnisfx Aivebu Paintwork Frame RAL 2011 traffic orange "10-year warranty against rust-through" Support feet black coated available in multiple units