Used Engel for sale (255)

Condition: good (used), Year of construction: 2000, clamping force: 4,000 kN, _TECHNICAL DATA – ENGEL ES 1800H/500W/400 HL-2F_ _INJECTION UNIT_ | AG1800H | AG500W Screw diameter: 70 mm | 40 mm Screw length: L/D 20 | 20 Metering stroke: 270 mm | 200 mm Screw speed: 226 rpm | 400 rpm Shot rate: 81 g/s | 32 g/s Injection rate: 386 cm³/s | 198 cm³/s Godpfx Aiozvf H Esvjbu Max. shot volume: 1039 cm³ | 251 cm³ Spec. injection pressure: 1441 bar | 1300 bar Spec. inj. pressure (increased): 1735 bar | 2020 bar Nozzle stroke: 750 mm | +5/-100 mm Nozzle contact force: 144 kN | 63 kN Heating capacity: 30.2 kW | 11.4 kW Heating zones (incl. nozzle): 5 | 7 _CLAMPING UNIT_ Clamping force: 4000 kN Opening stroke: 950 mm Ejector force: 82 kN Ejector stroke: 250 mm Max. platen distance: 1550 mm Min. mold height: 600 mm Platen BAP: 1400×1080 mm Platen FAP: 1400×1200 mm _DRIVE_ Pump power: 55 kW Oil (main tank): 540 l Oil (suction tank): 400 l _WEIGHT (without oil)_ Clamping unit: 27 850 kg Inj. unit AG1800H: 5 600 kg Inj. unit AG500W: 1 000 kg

Condition: excellent (used), ENGEL e-cap 3440/420 T injection molding machine Basic data Gbedezlgi Hepfx Aivou • Manufacturer: ENGEL • Model: e-cap 3440/420 T • Year of manufacture: 2012 • Machine type: Fully electric injection molding machine • Control system: ENGEL CC200 • Operating hours: 63,000 h • Screw diameter: 80 mm Technical data Clamping unit • Clamping force: 4,200 kN (420 tons) • Clamping mechanism: Kneel-type, fully electric • Opening stroke: 700 mm • Minimum mold height: 350 mm • Maximum mold height: 750 mm • Mounting plate dimensions: 1350 × 1350 mm • Column spacing: 920 × 920 mm • Ejector stroke: 220 mm • Ejector force: 120 kN • Maximum mold weight: 6200 kg Injection unit • Unit size: 3440 • Screw diameter: 80 mm • Injection volume: 1709 cm³ • Maximum injection pressure: 1950 bar • Number of heating zones: 6 Equipment • ENGEL CC200 control system • Fully electric drives for all axes • Energy-efficient ENGEL e-cap technology • Very high precision and process repeatability • Suitable for continuous 24/7 operation Machine history The machine has been used since new for the production of plastic buckets. It has never been used for the production of PET caps, although the e-cap series was designed specifically for this type of application. The average cycle time was approximately 15 seconds. As a result, the clamping unit has performed significantly fewer operating cycles than typical e-cap machines used for cap production, where the cycle time is usually below 2–4 seconds. This potentially indicates lower mechanical wear compared to machines operated according to their original intended purpose.

Condition: like new (used), Year of construction: 2004, operating hours: 69,000 h, functionality: fully functional, clamping force: 1,100 kN, screw diameter: 45 mm, Engel Victory 500/110 Tech Horizontal injection moulding machine with 110 tons clamping force, brand Engel, model Victory 500/110 Tech. Year of manufacture: 2004. Approx. 69,000 automatic operating hours. Includes a fully equipped production cell: ENGEL ERC 43/1-EA Robot (2004), conveyor belt, and safety fencing. The injection moulding machine is delivered RE-conditioned by our expert technical team and in optimal working condition. We can offer our customers on-site commissioning service, ensuring proper machine operation upon installation completion. Technical Details: Gjdow Hbiaepfx Aivebu Screw diameter: 45 mm Year of manufacture: 2004 Operating hours: 69,000 Opening stroke: 507 mm Injection volume: 318 cm³ Injection pressure: 1016/(1603 increased) bar Maximum distance between platens: 800 mm Minimum/Maximum mould thickness: 300 mm (min) / 500 mm (max) Platen dimensions: 740x680 mm

Condition: excellent (used), Year of construction: 2003, Engel Victory 330/80 Tech Gbsdpfxsxy Aixj Aivsu Clamping force: 80 tons Year of manufacture: 2003 Screw diameter: 35 mm

Condition: ready for operation (used), Year of construction: 2019, operating hours: 11,337 h, functionality: fully functional, machine/vehicle number: 234917, clamping force: 1,600 kN, screw diameter: 30 mm, Equipment: documentation/manual, The machine comes from a cleanroom production environment and has been operated exclusively with PP material. As a result, the screw is in very good and well-maintained condition. TECHNICAL DETAILS Clamping force: 1,600 kN Screw diameter: 30 mm Gsdey A Exdopfx Aivjbu MACHINE DETAILS Weight: 8,400 kg Operating hours: 11,337 h EQUIPMENT Documentation/Manual Comprehensive special equipment

Year of construction: 2012, condition: used, Electric cards E-CPU-186-B6-1.2 for Engel injection moulding machine Gbedsxr Uqlspfx Aivju

Condition: ready for operation (used), Year of construction: 2014, functionality: fully functional, clamping force: 980 kN, No reserve price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Gbjdpfxoy Ewmxs Aivju Clamping force: 100 t Note: When purchasing multiple items from the same location (see offers below), you will only be charged the lower costs for dismantling and loading.

Condition: ready for operation (used), Year of construction: 2013, operating hours: 65,000 h, clamping force: 5,000 kN, screw diameter: 90 mm, total height: 2,355 mm, overall weight: 14,000 kg, product length (max.): 7,800 mm, This Engel DUO 4550/500 pico was manufactured in 2013. It features a clamping force of 5,000 kN, a screw diameter of 90 mm, and a maximum injection volume of 2,480 cm³. The machine dimensions are 7,800 x 2,405 x 2,355 mm, and it weighs 14,000 kg. Currently in production with approximately 65,000 operating hours, it remains in excellent condition. Contact us for more information about this machine. • Maximum injection volume: 2,480 cm³ • Minimum mold height: 350 mm • Maximum mold height: 900 mm • Platen opening stroke: 1,300 mm • Platen dimensions (W x L): 1,270 x 1,260 mm • Tie-bar distance (H x V): 910 x 830 mm • Motor power: 83 kW • Heater power: 61.2 kW Gsdpjx Nr Uxofx Aivebu • Number of electrical connection pins: 32 • Injection nozzle radius (tip): R35 • Centering ring diameter: 200 mm • Robot interface: Euromap 67 • Number of cores: 0 • Number of heating zones: 0 • Operating hours: approx. 65,000 h • Condition: Excellent • Status: In production Additional equipment • Robot (equipped)

Condition: good (used), Year of construction: 2001, screw diameter: 35 mm, Engel injection molding cylinder Gbedpfszfq H Aox Aivju Screw diameter 35 Unit 330 Year of manufacture 2021

Condition: used, Year of construction: 1997, _Engel ES 1050/200 HL_ Clamping force: 200 t Year of manufacture: 1998 Control system: CC 100 Screw diameter: 45 mm Screw type: GF Gsdpfeztadgex Aivobu Min. mold height: 250 mm Max. opening stroke: 700 mm Max. platen distance: 950 mm Ejector stroke: 150 mm Tie-bar spacing (H × V): 820 × 750 mm Platen size: 500 × 570 mm Quick clamp: Yes Extras: Software gate separation

Condition: excellent (used), Year of construction: 2002, Engel ES 750/300 HL Year of manufacture: 2002 Gjdpfoxvm Scox Aivjbu Screw diameter: 55 mm Clamping force: 300 tons

Condition: used, Year of construction: 1997, _Engel ES 1050/200 HL_ SM ID: 300.30 Asset No.: A1998.016 Clamping force: 200 t Serial No.: 33813 Year of manufacture: 1998 Gedpfsztafdsx Aivebu Control system: CC 100 Screw diameter: 55 mm Screw type: GF Min. mold height: 250 mm Max. opening stroke: 700 mm Max. platen distance: 950 mm Ejector stroke: 150 mm Tie-bar spacing (H × V): 820 × 750 mm Platen size: 500 × 570 mm Quick clamp: Yes

Year of construction: 2012, condition: used, E-CG-CONTROL For injection moulding machine Gbodpfoxr Ut Hex Aivou Engel

Condition: good (used), Year of construction: 2000, screw diameter: 45 mm, Engel injection molding cylinder Unit 500 Screw diameter 45 mm Gbjdezfq Hispfx Aivju Quantity: 2 pieces

Condition: excellent (used), Year of construction: 2007, Engel Duo 11000H/7000H/1300 Year of manufacture: 2007 Technical Data Clamping Unit Clamping force: 13,000 kN Opening stroke: 3,000 mm Min. mould installation height: 1,000 mm Max. mould installation height: 1,800 mm Max. daylight between platens: 4,000 mm Mounting platen size: 2,200 x 1,990 mm Clear tie bar spacing: 1,530 x 1,275 mm Injection Unit 1 Screw diameter: 120 mm Dosing stroke: 570 mm Max. shot volume: 6,450 cm³ L/D screw ratio: 20 Specific injection pressure: 1,794 bar Nozzle stroke: 1,000 mm Number of heating zones: 6 Injection Unit 2 Screw diameter: 120 mm Dosing stroke: 4,800 mm Gbodpfx Aiox Up Rnovju Max. shot volume: 5,430 cm³ Specific injection pressure: 1,370 bar Nozzle stroke: 1,000 mm

Condition: used, Year of construction: 1993, Engel ES 80/50 HL (1993) Gjdpezu R Hzsfx Aivebu

Condition: excellent (used), Year of construction: 2001, Engel handling equipment ER-USP 5, year of manufacture 2001 Gbsdpfx Aiext S Taevsu

Condition: excellent (used), Year of construction: 2003, Engel ES,1350/250 HL Clamping force: 250 tons Year of manufacture: 2003 Screw diameter: 55 mm Injection volume: 618 cm³ Gbjdpsxvmndsfx Aivou Enlarged mounting platen 1050x900 mm Crane traverse x3 Air valve x3 Plus: Engel robot E - PIC Z Year of manufacture: 2017

Condition: good (used), Year of construction: 2005, operating hours: 76,988 h, functionality: fully functional, clamping force: 800 kN, screw diameter: 30 mm, displacement volume: 99 cm³, plate length: 600 mm, plate height: 670 mm, total length: 4,050 mm, total width: 1,930 mm, total height: 2,200 mm, overall weight: 5,200 kg, Equipment: documentation/manual, ENGEL Victory 200/80 Tech Stock No.: 503561 Manufacturer: ENGEL Type: VICTORY 200-80 Tech Control System: CC100 Year of Manufacture: 2005 Operating Hours: 76988 h Technical Data - Clamping Side Clamping Force: 800 kN Platen Size h x v: 670 x 600 mm Minimum Mold Height: 250 mm Maximum Mold Height: 700 mm Opening Stroke: 450 mm Ejector Stroke: 100 mm Ejector Force: 40 kN Centering of Moving Platen D: 125 mm Centering of Fixed Platen D: 125 mm Tool Weight: 675 kg Technical Data - Injection Side Screw Diameter: 30 mm Injection Volume: 99 ccm Injection Pressure: 1450 bar Screw Length: 20 l/d Screw Stroke: 140 mm Plasticizing Rate: 17 g/s PS Free Injection Flow Rate: 150 g/s PS Number of Heating Zones: 4 Nozzle Length: 200 mm Dimensions & Weight Machine Dimensions L x W x H: 4.05m x 1.93m x 2.2m Total Weight: 5200 kg Equipment Screen text: German CEE socket 16A Core pull hydraulically 1x Machine including conveyor belt Gjdpfx Ajz Ayttoivobu Machine including handling system Machine with water manifold Machine without material hopper Leveling elements Schuko socket 10A Technical Data - Handling System Machine Type: Linear handling system Manufacturer: Engel Control System: ER-HLI 31 VC Year of Manufacture: 2005 Handling System Weight: 2 kg Screen Text: German Total Weight: 250 kg

Condition: used, Year of construction: 1998, operating hours: 129,241 h, functionality: unexamined, machine/vehicle number: 37064, clamping force: 800 kN, overall weight: 5,900 kg, Year of manufacture: 1998 Serial number: 37064 Weight: 5,900 kg Gbedpfx Aijzv Rdisvsu Operating hours: 129,241 hours (as of 02/2025, continued operation until 12/2025) with ERC handling arm with Piovan material separator C10IX, SN: 3AL 9945 / Year of manufacture: 1998 with 2x Piovan temperature control units ETM09 with Engel ERC 23/3-CL, serial number 93996, year of manufacture 1998 Functionality and technical data have not been verified. without any further items/without any further accessories, unless explicitly stated as part of the item. If interested, please contact us via email!

Condition: excellent (used), Year of construction: 2006, Technical data Approximate dimensions on site (L × W × H): 8,300 × 2,500 × 2,330 mm Weight (approx.): 33,000 kg Serial number: 161394 Item description Clamping unit Clamping force: 6,500 kN Distance between tie bars: 1,025 × 930 mm Min./max. mould height: 450 / 950 mm Maximum opening stroke: 1,800 mm Injection unit Screw diameter: 90 mm Godpfxsyu Niio Aivsbu Injection volume: 2,480 cm³ Injection weight: 2,254 g Electro-hydraulic equipment Rated power of pump motor: 55 kW Heating capacity: 62 kW

Condition: ready for operation (used), Year of construction: 2011, operating hours: 61,666 h, functionality: fully functional, machine/vehicle number: 180299, clamping force: 6,500 kN, screw diameter: 90 mm, column diameter: 175 mm, injection weight: 2,520 g, opening stroke: 1,400 mm, The machine is in excellent condition; all hydraulic hoses were replaced in the fourth quarter of 2024! TECHNICAL DETAILS Clamping force: 6,500 kN Column spacing (H x V): 1,100 x 960 mm Platen size (H x V): 1,510 x 1,440 mm Tool height (min./max.): 650 / 1,150 mm Opening stroke: 1,400 mm Maximum distance between platens: 2,050 mm Maximum tool weight: 11,000 kg Ejector force: 95 kN Ejector stroke: 250 mm Column diameter: 175 mm Injection unit (Unit 5550) Screw diameter: 90 mm Maximum shot volume: 2,740 cm³ Maximum shot weight (PS): 2,520 g Injection pressure (max./boost): 2,180 bar Injection pressure (standard): 1,910 bar L/D ratio of the screw: 20 Screw stroke: 430 mm Maximum screw speed: 148 rpm Plasticizing rate: 77 g/s Nozzle pressure force: 150 kN MACHINE DETAILS Control: CC200 Drive and Supply Gbjdpfxoy T Hfyj Aivsu Installed drive power: 90 kW Cylinder heating power: 56 kW Number of heating zones: 6 Hydraulic tank capacity: 1,000 l Installed drive power: 90 kW Operating hours: 61,606 h EQUIPMENT Robot: Viper 40 Key features: 6 hydraulic circuits on the moving platen 2 hydraulic circuits on the fixed platen Cascade valves: 4 pieces (mounted on the fixed platen)

Year of construction: 2014, condition: ready for operation (used), Clamping force: 1600kN, weight: 9t, operational hours counter: 3638h, with Handling Robot ENGEL viper 20. Gbodpfx Aieh Nypfjveu

Condition: excellent (used), Year of construction: 2003, Engel ES 1800/300 HL-V Gjdpfx Aieww Nu Eovsbu Clamping force 300 tons Year of manufacture 2003 Screw 70 mm Max shot volume 1039 cm³ Core pull x3 Including robot

Condition: repair required (used), Injection moulding machine, Engel ES 330/85, Used machine As shown in the pictures, its working condition is uncertain. Overall dimensions :3100 x 1950 x 2600 mm Weight: 5500 kg Manufacturer: Engel Type: ES 330/85 Year of manufacture: 1997 Electrical data: 380V, 60 A, Contoller cards: Keba PS 244; Keba DO 321; Keba DO 321; Keba DO 321; Keba DI 325; Keba DI 325; Keba DI 325; Keba TT 081; Keba AR 181; Keba PD 242; Keba CU 211 Gbsdpfxeukn S Hs Aivou