Used Angel Antoni for sale (74)

Condition: excellent (used), Year of construction: 2019, ACS Angelantoni Model: ACS WZH10-4080-2 BT Angelantoni Walk-in Climatic Chamber ACS WZH10-4080-2 BT Optimized for Battery Testing (Li-Ion) -40°C to +80°C Description: For sale is a walk-in climate and environmental test chamber from the renowned manufacturer Angelantoni Test Technologies (ACS), model WZH10-4080-2 BT, year of manufacture 2019. The system is designed for demanding industrial, development, and research testing and is equipped with advanced safety features specifically tailored for battery and accumulator testing (e.g., lithium-ion). Special feature: Safety equipment for battery testing: The system is specially equipped for battery and accumulator testing, including: - Pressure relief flap for controlled pressure discharge in the event of a malfunction - Gas detection system for early identification of critical gas concentrations - Aerosol fire suppression system (SalgroMAG) → Ideal for lithium-ion testing Suitable for: - Batteries & accumulators (including lithium-ion) - Electronics & control units - Automotive components - Industrial & research tests - Endurance, aging, and stress tests Technical data (from nameplates & documentation) General: Model: WZH10-4080-2 BT Year of manufacture: 2019 Standards: CE, IEC/EN 60204-1 Design: Walk-in climatic chamber, double-door Test range: Temperature: –40 °C to +80 °C Relative humidity: 10% to 95% RH Electrical data: Supply: 400 V 3-phase + N + PE 50 Hz Rated power: approx. 37 kW Full load current: approx. 115 A Protection rating: IP54 Short-circuit strength: 10 kA Refrigeration system Refrigerant: R452A Charge: approx. 50 kg CO₂ equivalent: approx. 107 t Dimensions: Nwsdpfxsyg I Eye Adbsc External dimensions (approx.): Length: ~4.5 m Width: ~2.2 m Height: ~2.4 m Weight: approx. 3,800 kg Condition: used Scope of delivery: (See photo) (Technical data subject to change and errors excepted!) We are happy to answer further questions by phone.

Condition: used, Keysight / Scienlab Battery Test System SL1001A + Angelantoni Climate Chamber DM500 C 10 ESS SPEEDY BT SP Complete Battery Testing System – For Laboratory Use Incl. PC, software & technical documentation For sale is a professional battery test system, consisting of: - Keysight / Scienlab SL1001A Battery Test System - Angelantoni DM500 C 10 ESS SPEEDY BT SP Climate Chamber - Monitoring/Sampling Unit - Control PC with original software - Technical documentation The system is fully functional, well-maintained, and ideally suited for battery module testing, research, development, and quality assurance. Technical Data – Scienlab SL1001A: - Manufacturer: Keysight / Scienlab - Model: SL1001A - Year of manufacture: 2020 - Voltage / Current / Power: 80 V / 600 A / 24 kW - Dimensions (L×W×H): approx. 1.6 × 0.9 × 3.3 m - Weight: approx. 700 kg - Function: Charging, discharging, and cycling of battery modules - Condition: Very well maintained, laboratory use only Technical Data – Angelantoni DM500 C 10 ESS SPEEDY BT SP: - Manufacturer: Angelantoni Industrie S.r.l., Italy - Model: DM500 C 10 ESS SPEEDY BT SP - Year of manufacture: 2019 - Weight: approx. 1,225 kg - Temperature range: -70 °C ... +180 °C - Humidity range: 10 ... 98 % rH - Refrigerants: R449A + R23 - Pressure ranges (PS Hi/Lo): 28 bar / 8 bar - Wi-Fi integrated - CE certification present Nwjdpfx Adjxuqk Hjbec - Internal dimensions (L×W×H): approx. 1.6 × 2.3 × 3.3 m - Function: Temperature and humidity testing, ESS (Environmental Stress Screening) - Power supply: 3PH + N + PE, 400 V ±10 %, 50 Hz, full load 54 A - Max. power consumption: 32.5 kW Monitoring / Sampling Unit: - Dimensions: 0.6 × 0.5 × 0.2 m - Measured variables: Cell voltages, current, temperature - Interfaces: CAN, Ethernet - Compatible with Scienlab / Keysight PathWave software PC + Software + Documentation: - Industrial PC with control and measurement software - Enables automated test runs, logging, and data analysis Overall Dimensions / Weight (approx.): Component Dimensions (L×W×H) Weight Scienlab SL1001A 1.6 × 0.9 × 3.3 m 700 kg Angelantoni Chamber 1.6 × 2.3 × 3.3 m 1,225 kg Monitoring / PC 0.6 × 0.5 × 0.2 m 50 kg Total system L 3.2 m × W 2.5 m × H 3.3 m approx. 1,975 kg Applications: - Development, testing, and lifespan analysis of battery modules (e.g., Li-ion, LFP, NMC) - Fast charging and cycle tests - Environmental simulation for temperature and humidity - Research, industrial, and university laboratories Important Note: "The table shown in the photos is not included in the sale." Scope of Delivery: - Scienlab SL1001A power unit - Angelantoni DM500 C 10 ESS SPEEDY BT SP climate chamber - Monitoring/Sampling unit - Control PC with software - Technical documentation and manuals - Connection cables and accessories (as available) Condition: used Scope of delivery: (see image) (Specifications and data are subject to change and error!) For any further questions, we are happy to assist you by phone.

Condition: excellent (used), Year of construction: 2000, Angel ES 500/125 HL Nodpeh R T Slofx Adbjwc Closing 125 TO Year 2000 Scrow 45mm Spray weight 318 cm3

Year of construction: 1999, condition: excellent (used), Electronic cards Cc100 - Angel year 1999 PS244 PD242 CU 201 CU 211 DO 321 Di 325 AR 281 SR 161 BC 082 OUTPUT TT 081 Nwsdpfx Adshgka Asbec

Condition: excellent (used), Year of construction: 1999, Engel robot Nodpfx Adjxxdhtebjwc Year of manufacture: 1999 With Plus control cabinet

Year of construction: 1988, condition: used, Engel display, year of manufacture approx. 1988 Nedpfx Adexuu Ucobjwc

Year of construction: 2006, condition: good (used), 1087/5000 Complete Desoutter screwdriver system consisting of: 2 x Transducer controlled angle screw spindles Desoutter EML51-20J Art.Nr .: 6151650640 Torque range: 30 to 135 Nm Output: 1/2 " Number of revolutions. 403 min-1 Length: 166 mm Diameter: 51.2 mm 1 x screw control Desoutter MODCVI-2 (= rack version of TWINCVI-2) with transformer. Art.Nr .: 6159325210 Screw - on cable: 2 Nodpodcmdljfx Adbewc Number of screw cycles per channel: 250 Number of phases in a screw cycle: 20 IO Sum counter: 99 Screwdriving Bins: Moment + Angle + Date + Time + Result + (bar code): up to 11600 Screws: 6 Possible screw strategies: Torque control with angle control Rotation angle control with torque control Dremoment- / Drehwinkelsteuerung Torque control with rotation angle and gradient control Rotation angle control with torque and gradient control Stretch control Hold torque / position Friction torque test Electricity compatibility 1 x motor cable 5 m length Art.Nr .: 6159171120 1 x Sensor cable length 5 m Art.Nr .: 6159171220 Including operating instructions

Year of construction: 2002, condition: good (used), Complete Desoutter screwdriver system consisting of: 1 x Transducer controlled angle screwdriver Desoutter ERA40J Art.Nr .: 6151650800 Torque range: 8 to 40 Nm Output: 3/8 " Number of revolutions. 900 min-1 Length: 458 mm Weight: 2.1 kg 1 x Transducer controlled angle screwdriver Desoutter ERA60J Art.Nr .: 6151650810 Torque range: 15 to 60 Nm Output: 3/8 " Number of revolutions. 570 min-1 Length: 469 mm Weight: 2.2 kg 1 x screw control Desoutter MODCVI-2 (= rack version of TWINCVI-2) with transformer. Art.Nr .: 6159325210 Screw - on cable: 2 Number of screw cycles per channel: 250 Number of phases in a screw cycle: 20 IO Sum counter: 99 Screwdriving Bins: Moment + Angle + Date + Time + Result + (bar code): up to 11600 Screws: 6 Moeliche screw strategies: Torque control with angle control Rotation angle control with torque control Dremoment- / Drehwinkelsteuerung Torque control with rotation angle and gradient control Rotation angle control with torque and gradient control Stretch control Hold torque / position Friction torque test Electricity compatibility 2 x motor cable for hand screwdriver 5 m length Art.Nr .: 6159170720 1 x Sensor cable length 5 m Nwodpfedcmizjx Adboc Art.Nr .: 6159171220 Including operating instructions

Condition: excellent (used), Year of construction: 2013, functionality: fully functional, 10 cup wheels vertical edging machine + Clean 20 floculant water treatment system variable angle 0-45° glass thikness : 3 - 55 mm min. glass dimension : 100 x 100 mm Nwodpfx Ajymxk Hedbec max. load : 1800 kg height of work surface : 840 mm total power : 20 Kw tank capacity 340 L forward speed : 0,4 - 5,5 m/min. total weight : 3800 kg

Condition: ready for operation (used), output 5,5 kw voltage 400 V Nwsdpfxjylp Ako Adbec B3 Electric motor Cantoni 20G40C32P0DG0004 3~Motor 2SIE1 32M6B

Condition: ready for operation (used), Diameter range: 50 mm - 108 mm Height range: 38 mm - 197 mm Production capacity: up to 500 c.p.m. No. of heads: 6 Nwodpfxstqmryo Adbsc

Condition: excellent (used), Year of construction: 2007, Hangcha forklift CPCD 80-RW14, 8 ton lifting capacity, with side shifter and automatic fork adjustment. Very good condition, technically perfect, from second owner. Original operating hours only 1170, year of manufacture 2007. 6-cylinder Isuzu engine, dry and flawless. Engine starts immediately, even at minus 10 degrees Celsius. New service, new rear tires. Lifting height 4m, overall height 3.2m, fork length 1.8m; including fork extensions to 2.8m. Lighting, indicators, etc. With cabin, air conditioning, heating – everything works. Own weight 11,490 kg. Nwsdpfx Ajyk Hwvodbsc

Condition: good (used), Year of construction: 2007, functionality: fully functional, 10 cup wheels vertiocal glass edging machine glass thikness : 3 - 30 mm min. glass size : 50 x 50 mm max. glass weight : 1000 kg working height : 812 mm total power : 16,3 Kw water tank capacity : 422 L working speed : 0,5 - 5,5 m/min. Njdpfoyhpqaex Adbewc weight : 2890 kg The machine has worked with a flocculant .

Year of construction: 2022, condition: ready for operation (used), An unused and still originally packaged continuous pasteurizer Pietribiasi Michelangelo Srl is available. Throughput capacity milk: 1500l/h, throughput capacity cream max. 40% fat: 750l/h, inlet temperature: 6°C, pasteurization at 68/74/88°C, outlet temperature: 6°C, capacity foreflow tank-balance tank: 100l. With centrifugal pump for product and cleaning, additional section and hot water group, plate heat exchanger with stable internal construction in AISI304, special heat exchanger plates Sondex Denmark in AISI316, surface area per plate: 0.08m², flow volume per plate: 0.21dm³, special gaskets made of nitrile snap-on without glue, hydraulic test pressure: 8.0bar, test temperature: 110°C, heat recovery: 85%, temperature profile 6-68/74/88-6/33/45°C - 4 sections, final heating outlet cheese/yogurt: 33/45°C, media: approx. 3000+3000l/h hot water 92°C, approx. 3000l/h cooling water 2°C, holding tube for 15s, design stainless steel AISI304, switching system for product to the foreflow tank by means of pneumatic changeover valve as soon as the heating temperature is approx. 2°C below the setpoint, 2x hot water generators for pasteurization and final heating, closed circuit, assembly for automatic water supply, automatic system for hot water supply, expansion vessel, pump, brazed plate heat exchanger. Documentation available. An inspection on site is possible. Nedoyln D Tspfx Adbswc

Condition: good (used), Make: Angelus Type: automatic seaming machine with 4 heads Model: 40P Capacity: up to 12,000 cans per hour depending on can size, product and conditions Range: tin diameter ø 52,5 - ø 99 mm (by means of size sets) tin height up to 110 mm Frame: steel, painted in RAL9006 Dimensions: L x W x H = 2,500 x 1,400 x 2,200 mm Weight: 2,500 kg. Power supply: 380 Volt - 50 Hz - 4 kW Features: straight line feed without safety enclosure Tooling: machine equipped for one can size Ø 99 mm as-is or customized to customer specification Nedjf Rtffspfx Adbowc

Year of construction: 1975, condition: good (used), functionality: fully functional, Peeling machine / Centering-Charging device Peeling machine Angelo Cremona SFL 2700 x 1100 - 1975 Centrering and Charging device CTA 4 - 1976 Nodpfx Ast D A S Iedbswc Veneer unwinding Bertram - 1995 To be dismantled by buyer

Condition: ready for operation (used), functionality: fully functional, empty load weight: 8,400 kg, maximum load weight: 30,600 kg, overall weight: 39,000 kg, axle configuration: 3 axles, first registration: 06/2007, loading space length: 13,500 mm, loading space width: 2,550 mm, loading space height: 850 mm, total length: 13,500 mm, total width: 2,550 mm, suspension: air, tire size: 245.70 R 17.5, ground clearance: 850 mm, color: light blue, trailer brake: trailer braked, Year of construction: 2007, Equipment: ABS, Used De Angelis low loader semi-trailer, year 2007, 3 axles with 3rd steering axle, ABS, air suspension, single rear spring ramps, gooseneck platform, 9.95 m loading deck (lowered section), deck height from ground 85 cm, side lashing rings, sideboards on the neck, extendable boards for oversize loads, rear stabilizer legs, inclined rear for loading, toolbox, prepared for side extensions, inspected until 31.07.2026 – DEALER INTERDRIVE SRL – PARMA. Nwedpfxeym A Aye Adbec

Year of construction: 2017, operating hours: 1,752 h, condition: excellent (used), functionality: fully functional, Calender Monti Antonio 72-3600 + Plotter Mimaki JV5 320s Calender Monti Antonio 72-3600 Calender in very good technical condition, regularly lubricated. Cylinder diameter: 200 mm Material width: 3,200 mm Required pressure: 6-8 bar Speed: 0.1 - 1.7 m/min Max. temperature: 230 °C Maximum power consumption: 19 kWh, average consumption: 13 kWh Operating hours: 1752h Meter reading: 58104m Included with the calender is the graphic printer plotter Mimaki JV5-320s: The machine is in very good technical condition, all nozzles are open, regularly cleaned. On 07/07/2023, all print heads and accessories were replaced: - DX5 print head – 4 pcs - Dampers – 32 pcs - Captops – 4 pcs - Pumps – 4 pcs - FPC tapes – 4 pcs - Sponges Approx. 1000 running meters have been printed since then. Total machine output: 13543m Nwodot Rhmkjpfx Adboc

Condition: new, functionality: fully functional, color: red, DE ANGELIS 3S425 Semi-Trailer, NEW, UNREGISTERED Maximum weight: 42,500 kg Tyres: 13 units, size 245/70 R17.5’’ Vehicle equipped with: - Hydraulic loading ramps, 4.00x0.85 m, wooden surface (fixed position, not laterally adjustable) - Electro-hydraulic power unit - 1 stainless steel toolbox, 600x600x300 mm (ditch side) - Gigant axles - Air suspension - 3rd axle steering - Lashing ring kit - 200 mm high aluminium sideboards on gooseneck Nedjylayajpfx Adbowc CUSTOMIZED FINANCING OR LEASING OPTIONS AVAILABLE ONSITE. FROM 24 UP TO A MAXIMUM OF 96 INSTALLMENTS, ALSO WITH ZERO DOWN PAYMENT. OTHER LOCATIONS OF OUR GROUP: DOMENICO TRUCK SRL, NAPLES BRANCH DOMENICO ESPOSITO S.P.A., EBOLI (SA) BRANCH - OFFICIAL DEALER MERCEDES-BENZ, FUSO, FOTON TRUCK, PIAGGIO COMMERCIAL & MAXUS CONTACTS: 0823 1686306 335 6713062 – 377 7064530 OPENING HOURS: MONDAY-FRIDAY 8:30 AM-7:00 PM – SATURDAY 8:30 AM-2:00 PM WE OFFER A WIDE SELECTION OF USED MULTI-BRAND COMMERCIAL & INDUSTRIAL VEHICLES: Fiat – Hyundai – Daf – Mercedes-Benz – Renault – Peugeot – Iveco – Mitsubishi – Scania – S-Way – S500–V8–650–580–730–Stralis – MAN – Nissan V8 – Intarder – 770s – Limited Edition – 660 S Semi-trailer – Refrigerated Tipper – Lamberet – Schmitz – Isuzu – Fixed flatbed – Crane – Tipper – 4 axles – 4 Rear Axles – Tway – T-Way – 540 – 460 hp – Xway – X-Way – Three-way tipper – V8 – Scania – Frost Edition Curtain-sided – Box – Tail lift – Refrigerated Cell – Insulated with Refrigeration – Van Domenico Truck srl declines all responsibility for any discrepancies regarding technical specifications, options and features, which may in some cases differ from those described. We advise verifying the characteristics of the specific vehicle.

Condition: good (used), functionality: fully functional, Diameter range: 99 mm - 178 mm Height range: 89 mm - 254 mm Production capacity: up to 150 c.p.m. Nedpfstqmv Dex Adbjwc Tooling for approx.: 99 mm (401) or 153 mm (603)

Condition: good (used), functionality: fully functional, ANGELO CREMONA DRYER model ER 18, 4400mm, 3 levels, steam steam consumption at 10 bar - 2200 calories/hour water consumption at 185° - 1100000 calories/hour Nwedevndvyjpfx Adbec PRODUCTION birch thickness 1.2mm initial humidity 80% final humidity 6% load 85% 4.2 m3/hour Installed power Kw 95.5 Machinery dismantled, requires overhaul.

Condition: used, Year of construction: 1999, functionality: fully functional, Complete line consisting of: 1. Angelo Cremona Veneer Peeler – detailed description available below 2. Angelo Cremona Dryer – description and photos available in the listings 3. CMP Press – description and photos available in the listings 4. Imeas Sander – description and photos available in the listings 5. Raute Composer – description and photos available in the listings PEELING PLANT Comprising of: Centering Loader 1. Model CE08 2. Angelo Cremona 3. Positions logs for loading onto the veneer peeler 4. Power supply: 400Vac/50Hz – 50kW Maximum hydraulic pressure: 100 bar Compressed air consumption: 0 L/min Weight: kg Maximum dimensions: 600x300x400 mm 5. Production capacity: 4 logs per minute Veneer Peeler 1. Model SFH870 2. Angelo Cremona 3. Peels a sheet of wood from the rotation of the log 4. Power supply: 400Vac/50Hz – 240kW Maximum hydraulic pressure: 100 bar Compressed air consumption: 10 L/min Maximum dimensions: 600x400x300 mm 5. Production capacity: 50 cubic meters per shift Cutting and Sorting Line 1. Model TSR27 2. Angelo Cremona 3. Transports the peeled ribbon to the guillotine for optimized sheet cutting 4. Power supply: 400Vac/50Hz – 70kW Nedpevm An Ejfx Adbowc Maximum hydraulic pressure: 100 bar Compressed air consumption: 0 L/min Maximum dimensions: 300x200x200 mm 5. Production capacity: 50 cubic meters per shift Sorting Line and Vacuum Stacker 1. Model LTR27 2. Angelo Cremona 3. Separates and stacks recovered sheets from full-size sheets 4. Power supply: 400Vac/50Hz – 180kW Compressed air consumption: -- Maximum dimensions: 300x1300x500 mm 5. Production capacity: 50 cubic meters per shift

Year of construction: 1977, condition: used, Make: Angelus Type: automatic 4 head rotary can clincher (1st operation) Model: 40P Serial no.: 96831077 Build: 1977 Frame: coated mild steel Dimensions: L x W x H = 2500 x 1400 x 2200mm Capacity: up to 12.000 cans per hour Power supply: 380 Volt – 50 Hz – 4,0 kW Features: disc-feed belt-pulley speed regulation machine has a lid magazine Nwedpfxjiaulde Adbsc Tooling: can size 99 mm

Condition: new, functionality: fully functional, Equipment: tail-lift, DE ANGELIS 3S425 semi-trailer, maximum gross weight 42,500 kg, with 13 tires, size 245/70R17.5’’ Vehicle equipped with: - 4.00 x 0.85 m hydraulic loading ramps, wood-covered (fixed, non-sliding) - electro-hydraulic unit - 1 stainless steel toolbox 600x600x300 mm (right-hand / ditch side) - Gigant axles - air suspension - 3rd self-steering axle - lashing ring kit - 200 mm high aluminum sideboards on gooseneck POSSIBILITY OF CUSTOMIZED FINANCING OR LEASING DIRECTLY ON SITE. FROM 24 UP TO A MAXIMUM OF 96 INSTALLMENTS, ALSO WITH ZERO DOWN PAYMENT. OTHER BRANCHES OF OUR GROUP: DOMENICO TRUCK SRL - NAPLES BRANCH DOMENICO ESPOSITO S.P.A. - EBOLI (SA) BRANCH - OFFICIAL DEALER MERCEDES-BENZ, FUSO, FOTON TRUCK, PIAGGIO COMMERCIAL, AND MAXUS CONTACTS: Nwsdpfxsydcyys Adbsc 0823 1686306 335 6713062 - 377 7064530 OPENING HOURS: MONDAY-FRIDAY 8:30/19:00 - SATURDAY 08:30/14:00 WE OFFER A LARGE SELECTION OF USED MULTI-BRAND COMMERCIAL/INDUSTRIAL VEHICLES: Fiat – Hyundai – Daf - Mercedes-Benz – Renault – Peugeot – Iveco – Mitsubishi – Scania - S-Way - S500-V8-650-580-730-S500-S 500-S500 – Stralis – Man - Nissan V8 - Intarder- 770s - Limited Edition - 660 S Semi-trailer – Fridge trailer – Lamberet - Schmitz Isuzu – Flatbed – Crane – Tipper – 4 axles – Rear 4 Axles – Tway-T-Way-540-460 hp – Xway-X-Way-Tri-side tipper – V8 – Scania – Frost Edition Curtain-sided – Box – Liftgate – Refrigerated cell – Insulated with fridge – Van Domenico Truck srl disclaims any responsibility for potential discrepancies in equipment, options, or features that may, in some cases, differ from the descriptions provided. Please check the specific vehicle features before purchasing.

Condition: ready for operation (used), Year of construction: 1995, functionality: fully functional, turning length: 600 mm, rotational speed (max.): 4,500 rpm, swing diameter over bed slide: 415 mm, TECHNICAL DETAILS CNC control: Fanuc 21 i-T Swing diameter: 415 mm Turning length: 600 mm Speeds: up to 4,500 rpm Spindle power: 15 kW Number of turret positions: 11 MACHINE DETAILS Weight: 4,000 kg Njdpfxowtq Tho Adbjwc EQUIPMENT - Ejector - Collection device - Tools - Motorized automatic tailstock