Used C200 for sale (190)

Condition: excellent (used), Year of construction: 2016, operating hours: 5,397 h, functionality: fully functional, first registration: 12/2016, overall weight: 4,000 kg, fuel type: diesel, color: white, axle configuration: 4x4, maximum load weight: 1,200 kg, empty load weight: 2,800 kg, fuel: diesel, brakes: engine braking, driver cabin: day cab, gearing type: hydrostat, emission class: euro6, suspension: steel, Equipment: ABS, additional headlights, air conditioning, all wheel drive, cruise control, electronic stability program (ESP), fog lights, hydraulics, An authorized SUBARU dealership in Łaziska Górne offers a compact JOHNSTON, now BUCHER JOHNSTON model C200 sweeper, sourced from Sweden from a company specializing in cleaning roads and large facilities. The machine is well-suited for work on sidewalks or in densely populated residential areas due to its small, compact dimensions. This sweeper comes from its first owner, who had over 20 units in their fleet, and all were serviced according to the manufacturer's recommendations. The machine is designed for maintaining the cleanliness of roads, sidewalks, parking lots, squares, urban areas, industrial plants, logistics centers, and municipal areas. The Johnston C201 is a highly regarded and proven suction sweeper, characterized by its compact dimensions, high maneuverability, and high work efficiency in urban environments. Cabin equipment: Radio Air conditioning Rearview camera Brand: Johnston Sweepers Model: C201 / C200 Year of manufacture: 2016 Serial number: 2000 / 207006 / 03 / 16 GVWR: 4000 kg Permissible total weight: 4750 kg Permissible front axle load: 1970 kg Permissible rear axle load: 2030 kg Certificate: PM10 Certified CE marking: Yes Noise level LWA: 103 dB Machine type: compact suction road sweeper Waste container capacity: 1.8 m³ Usable container capacity: approximately 1.5 m³ Fuel tank: 52 l Gedpfsy U Nidex Aafouf Clean water tank: approximately 152–175 l, depending on the version Water recirculation system: approximately 250 l Total water system capacity: approximately 402–425 l Drive: hydrostatic Sweeping working speed: 0–16 km/h Travel speed: up to 40/50 km/h, depending on the CN/CX version Theoretical sweeping performance: up to 36,800 m²/h Climbing ability: up to 30% Suction nozzle width: approximately 815 mm Brush diameter: approximately 850 mm Container discharge height: approximately 1545 mm DIMENSIONS: Overall length: approximately 4270 mm Overall width: approximately 1315 mm Overall height: approximately 1985 mm MACHINE DESCRIPTION: The Johnston C201 / C200 is a compact suction road sweeper that performs excellently in urban and municipal work. Thanks to its small dimensions, the machine is very maneuverable and can operate in places where larger sweepers have limited maneuvering capabilities. The machine is ideally suited for cleaning streets, sidewalks, bus bays, parking lots, maneuvering areas, industrial areas, residential areas, city centers, and private properties. The suction system, together with the side brushes, effectively collects sand, dust, leaves, small debris, and road dirt. A major advantage of this machine is its 4000 kg GVWR, which means a higher permissible total weight than in the 3.5-ton versions. The machine has a PM10 certificate, CE marking, and a Johnston Sweepers factory nameplate. APPLICATION: Maintaining the cleanliness of roads and streets Cleaning sidewalks and paths Municipal work Cleaning parking lots and squares Maintaining industrial areas Serving municipalities, cities, and municipal companies Work at logistics centers and production facilities Cleaning private and residential areas The stated price is net and applies to export and for companies. A significant discount is possible for individual customers. Please contact us directly by phone to get your best price.

Condition: ready for operation (used), Year of construction: 2016, laser power: 200 W, Laser engraving machine manufactured in 2016. This Trotec SP500 C200 features a powerful 200W CO2 laser source and a generous working area of 1240 × 710 mm. With only 1,550 working hours, it remains in excellent condition and has been used solely for paper and cardboard cutting. If you are looking to get high-quality laser cutting and engraving capabilities, consider the Trotec SP500 C200 machine we have for sale. Contact us for further details. • Laser source: 200 W CO2 • Working area: 1240 × 710 mm • Working hours: 1,550 h • Condition: Excellent/mint • Ownership/usage: Single owner; used only for paper and cardboard • Integrated equipment/options: • JobControl Vision camera system • Autofocus system (high-precision electro-optical) • Laser pointer • Electronically controlled Z-axis • Air-assist with integrated compressor • Dust Protection Pack Technology • JobControl Expert software • Pass-through system • Tables: Honeycomb table; Slat cutting table; White acrylic + aluminum table • Optics: 2.0" precision lens + additional optics package (2.0", 2.5", 5.0") • Gas kit • Commercial info: • Machine under power; available for inspection and cutting tests • Location: Modena, Italy • Note: 24 months warranty originally included Additional equipment • Industrial water chiller • Professional mobile fume extraction system • H13 washable filter cartridges • Additional spare filter cartridge • Pneumatic pulse-cleaning system • 1.5 HP extraction fan motor • Double activated carbon filtration cell Guedpfx Aajzarzrsfof • Full package sale includes: Laser machine + chiller + professional fume extractor

Condition: used, Year of construction: 1989, Batch fluidised bed dryer in stainless steel with spray granulation. Manufacturer : Glatt Model: WSG-C200 Year: 1989 Previous use: pharmaceutical Product pan capacity: 700 litres. Product capacity: 200 – 280 Kg Air filtration and heating battery. Bag filtration Heat exchange: tubular Temperature control: multiple sensors Spraying: yes Watson Marlow peristaltic pump Spray nozzle Frame and tower: 316 stainless steel Electrical cabinet Gujdpfx Asx R An Sjafsf Sold with 2 pans and protective pockets Trolley reverser: available Documentation: available in German Spare parts Valves available Fan not available. Hot water generator / boiler not available

Condition: used, power capacity 30 kW volt 380 V ampere 58 A Guodpfed Ihafox Aafjf new motor with options G45 und K42 Data please see typeplate.

Condition: excellent (used), Year of construction: 2009, operating hours: 29,000 h, functionality: fully functional, Equipment: documentation/manual, The INDEX C200 – manufactured in 2009 – is a powerful CNC production turning center with a FANUC 31i control, main and counter spindle, and a 65 mm bar capacity. The machine features a high-quality 3-turret design, with turrets 1 and 2 each equipped with X, Z, and Y axes, and turret 3 used for machining on the counter spindle. All three disc turrets are equipped with 10 stations and, with driven tools up to 6,000 rpm, enable highly flexible complete machining. With a portal parts handler, conveyor belt, C-axes on the main and counter spindles, and powerful spindle drives, the machine is particularly suitable for productive series production of complex turned/milled parts. Control: FANUC 31i Design: Machine with 3 tool holders / 3 disc turrets Gusdey Tmhzjpfx Aafsf Bar capacity: 65 mm Machine bed: Vertically arranged gray cast iron machine bed Main spindle: Spindle 4 Counter spindle: Spindle 5 with Z-axis Spindles Main spindle Bar capacity: 65 mm Spindle diameter at front bearing: 110 mm Spindle nose: ISO 702/1, Size 140 Cyl. Chuck diameter: 160 mm Power: 25 kW at 100% ED / 33 kW at 40% ED Torque: 112 Nm at 100% ED / 150 Nm at 40% ED Speed: 5,000 rpm C-axis: Resolution 0.001° Counter spindle Bar capacity: 65 mm Spindle diameter at front bearing: 110 mm Spindle nose: ISO 702/1, Size 140 Cyl. Chuck diameter: 160 mm Power: 25 kW at 100% ED / 33 kW at 40% ED Torque: 112 Nm at 100% ED / 150 Nm at 40% ED Speed: 5,000 rpm C-axis: Resolution 0.001° Counter spindle Z-axis: 700 mm travel Rapid traverse Z-axis: 50 m/min Tool holder / Turret Design with 3 disc turrets, each with 10 stations. Tool system with 10 stations: Cylindrical shank DIN 69880 – Ø30 x 55 mm. Tool holder 1 X, Z, Y axes 10 stations X-axis: 110 mm Z-axis: 320 / 550 mm (according to documentation) Y-axis: 100 mm, ±50 mm Driven tools: 6.5 kW / 16 Nm / 6,000 rpm Tool holder 2 X, Z, Y axes 10 stations X-axis: 110 mm Z-axis: 550 mm Y-axis: 100 mm, ±50 mm Driven tools: 6.5 kW / 16 Nm / 6,000 rpm Tool holder 3 X-axis 10 stations Used exclusively for machining on the counter spindle X-axis: 180 mm Driven tools: 6.5 kW / 16 Nm / 6,000 rpm Further technical equipment according to documentation Portal parts handling system with numerically controlled Z-axis Workpiece removal from main or counter spindle to conveyor belt Removal of scrap material from the main spindle into a scrap container Portal parts handler: Traverse speed: 100 m/min Traverse range: 70 mm Workpiece diameter max.: 90 mm Workpiece length max.: 250 mm Scrap length max.: 250 mm Workpiece weight max.: 3.5 kg Hydraulic system: Flow rate: 19 l/min System pressure: 90 bar Hydraulic tank: 40 l Coolant circuit: Flow rate: 19 l/min Coolant unit power: 13 kW Coolant system: Pump output: 80 l/min / 8 bar Tank capacity: 300 l Chip conveyor: Chip discharge height: 1,250 mm

Condition: excellent (used), I sell in very good condition TIG welder, L-TEC 200 DC. Price given for 1pc. Guedpfx Asud R T Sjafsf

Condition: new, Year of construction: 2026, functionality: fully functional, overall weight: 15,500 kg, rotor diameter: 800 mm, rotor width: 2,000 mm, power: 250 kW (339.91 HP), rotational speed (max.): 480 rpm, Equipment: rotational speed infinitely variable, Genox GXC2000G Series - Heavy Duty Granulator suitable for processing various materials including plastics, wood, rubber etc. 250kW Drive Motor with outboard rotor bearings (200kW - 315kW drive options are available), heavy duty precision machined rotor, and 480rpm operating speed as standard. 2,000mm wide x 800mm diameter cutting chamber with a choice of either a 5, 7 or 9 row V Cutting Rotor. Two rows of counter knives are mounted in the chamber and as an option a third row can be mounted in the throat of the machine to increase cutting efficiency. Gusdpfozudm Uox Aafof All knives are manufactured from Vacuum Heat Treated D2 Tool Steel. Hydraulic assisted chamber and screen access with integrated safety interlocks, and a setting jig is supplied for pre-setting of knives off the machine to enable quick, simplified knife changes. Output size is controlled by replaceable screens mounted beneath the rotor shaft - sizes supplied as required (4mm-50mm). A sound attenuation enclosure is available as an option to minimise operational noise if required. We can provide infeed conveyors and product conveying systems as required to transfer product in to bulk storage bags if required.

Condition: used, Year of construction: 2008, Technical details: turning diameter: 410 mm turning length: 500 mm control: Fanuc 21i TB standard turning diameter: 275 mm travel -x axis: 277 mm travel -y axis: 82 (±41) mm travel -z axis: 500 mm Spindle 1 RPM: 4500 1/min Spindle 1 Power: 18,5/18,5/15 kW Spindle 1 max. bar diameter: 65 mm turret stations / rotary tool stations: 12/12 Power rotary tools: 5,5 kW RPM of rotary tools: 6000 1/min total power requirement: 39,2 kVA weight of the machine ca.: 6,2 t dimensions of the machine ca.: 3,1 x 2,0 x 2,2 m collet chuck: Hainbuch Accerories Chip conveyor Robot interface Gedpfxjzd Un Io Aafouf High precision Turning and Milling Centre with Y-axis and robot loading. Stäubli Robot for shaft loading. *

Condition: good (used), Year of construction: 1999, operating hours: 52,324 h, functionality: fully functional, X working area max.: 1270 mm Y working area max.: 1270 mm Control: Bosch Type 3 Basic Standard equipment: Gusdpoy Sat Uefx Aafef - Robust C-frame - Safety light barriers - Coordinate guide with integrated linear magazine - 2 clamping claws - Automatic tool changer - Automatic repositioning - Tool length compensation - Forming capability - Mono tool holder with 360° rotation for all tools - Programmable hold-down device - Multitool drive - Punch slug extraction - Brush tables - Part chute 200 x 200 mm, sorting of parts into 2 containers - NC-controlled, digital, maintenance-free three-phase drives - Network interface RJ34 - 3.5" floppy disk drive - TOPS 2000 graphical programming - Online diagnostics via modem - Operating manual + Vibration-damped installation + Multitool + Thread forming + Start post

Condition: used, Year of construction: 2000, x-travel 1120 mm y-travel 510 mm z-travel 510 mm control Mazatrol 640 M Guodpfx Aaoztfu Djfjf

Condition: used, Year of construction: 2003, x-travel 1660 mm y-travel 510 mm z-travel 510 mm Gjdpsztfuwsfx Aafjuf control Mazatrol 640M

Condition: good (used), Year of construction: 2002, travel distance X-axis: 1,660 mm, travel distance Y-axis: 510 mm, travel distance Z-axis: 510 mm, workpiece weight (max.): 1,000 kg, spindle speed (max.): 10,000 rpm, number of slots in tool magazine: 30, Equipment: chip conveyor, Used Mazak machining center, type VTC-200C, year 2002, in like-new condition, 10,000 rpm with spindle cooling. X = 1660 Y = 510 Z = 510 Gujdpfxjzhv Uws Aafjf 1000 kg capacity on the table. Several high-quality vices are included. Weight: 9100 kg BT 40 A few holders are included. Space for 30 tools in the magazine. The machine can be picked up ex-works in week 34 of 2026.

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2019, machine/vehicle number: NO-19-06-08209/GE1101825, Manufacturer: EFD Induction a.s. Type: SINAC 200/320 SM DUAL 2U2F Serial number: NO-19-06-08209/GE1101825 Year of manufacture: 2019 Electrical data Input voltage: 3 × 400 V Input current: 368 A Gusdpfjvw Tdrox Aafof Mains frequency: 50/60 Hz Input power: 254 kVA Reactive power: 254 kVAr Output data Output voltage: Not specified Output current: 7200 A Output power: 200 kW Frequency range: 2 × 9-13 kHz Cooling & operating conditions Water consumption: 100 l/min Maximum inlet temperature: 35°C Maximum pressure: 6 bar Min. pressure difference inlet/outlet: 4.5 bar Ambient temperature (operation): +5°C to +50°C Protection class (IP): IP54 Additional data (control unit / control cabinet VL-1000.2 SP) Type: VL-1000.2 SP Sinac 200/320 SM DUAL Serial number: GE-19-07-00417 Machine number: GE1101825 - 15153199 Input voltage: 400 V Input current: 38 A Mains frequency: 50 Hz Power: 18 kVA

Condition: used, Year of construction: 2010, operating hours: 9,000 h, functionality: fully functional, travel distance X-axis: 2,000 mm, travel distance Y-axis: 1,500 mm, travel distance Z-axis: 1,250 mm, rapid traverse X-axis: 30 m/min, rapid traverse Y-axis: 30 m/min, rapid traverse Z-axis: 30 m/min, Travel distances X=2000 mm, Y=1500 mm, Z=1250 mm - Siemens 840 DsL CNC control Godpfxszta H Is Aafjuf - NC rotary table for 4-sided machining, 1250 mm x 1250 mm - Horizontal spindle HSK100 - Spindle: 2500 rpm, HSK 100, 2200 Nm spindle torque - Approx. 9,500 spindle hours - Tool changer system HSK 100 / 40 stations - Chip conveyor - Internal/external air blow-off device - Minimum quantity lubrication for dry machining of castings - Full enclosure - Large interference circle 2300 mm - Double pallet changer - Short delivery time, subject to prior sale - Year of construction: 2010 Coolant supply available as an option - ICS 60 bar for deep hole machining

Year of construction: 2025, condition: new, Brand new stainless steel agitator tank with beam agitator and load cells CILC2000RWS Volume: 2107L Dimensions approx.: Ø 1430mm x cyl. Height 1250mm Total height: approx. 1650mm (plus agitator motor) Material: 1.4301 stainless steel V2A Surface: inside BA (IIId), outside satin finish Welding seams in the container ground -Standing design on three feet -Top: hinged lid, central crossbar with 2 hinged lid halves with locking function (can be locked in 90° open position) -Metal grates below the hinged lid as protection against soap, screwed, removable -Bottom: conical bottom with central outlet DN50 DIN11851 nozzle -Agitator flange on the top -1x reserve nozzle DN50 DIN11851 on the top with blind cap -Type plate -180° spray head Gusdjvtyf Ijpfx Aafsf - Weighing cells - Speed control Agitator: Bar agitator Make: Schwarzer Rührtechnik GmbH Type: SRTGMK/1.5-149 Power: 1.5KW Speed: 149RPM Operating voltage: 3PH 400V -Gearbox made by Getriebebau NORD -Solid agitator shaft with sleeve coupling attached to the gear motor, removable -Agitator shaft balanced for concentricity in the speed range -2 2-blade bar agitators Ø 500mm, height adjustable on the agitator shaft, attached via side power screws Grilled and passivated -Stainless steel flange with shaft seal and O-ring seal -MFR converter

Condition: used, Year of construction: 2005, Serial Number 177554 YOM 2005 Gsdpszilp Tjfx Aafouf Mazatrol 640m Control EIA & Mazatrol Programming 30 Tool Magazine CAT Tooling 4th Axis Swarf Conveyor Mazak Tool length measuring unit Spindle thru coolant UK Buyers - Price £42,000 +VAT Carriage/delivery is additional

Year of construction: 2020, condition: ready for operation (used), A handheld pulse laser cleaning machine is available. Laser source: Raycus RFL-P200, laser power: 200W, cooling medium: water, frequency: 50kHz, max. speed: 10m/s, max. cleaning width: 50mm. The machine is a demonstration unit with few operating hours. Documentation available. An on-site inspection is possible. Guedpfxozfaaxj Aafof

Condition: ready for operation (used), Year of construction: 2005, A CNC vertical moving-column machining center Mazak in need of repair is available. Travel X/Y/Z: 1120mm/510mm/510mm, table dimensions X/Y: 1460mm/510mm, max. table load: 800kg, spindle speed: 12000rpm, tool holder: SK40, tool stations: 30, rapid traverse: 36m/min. Machine dimensions X/Y/Z: approx. 3300mm/2900mm/2800mm, weight: approx. 7500kg, control: Mazatrol 640 M. The spindle does not always decelerate properly. Documentation available. An on-site inspection is possible. Gedezf Nccepfx Aafjuf

Condition: ready for operation (used), Year of construction: 2015, A high-performance planetary gear production line EMAG including automation and peripheral equipment is available. 1) Raw parts storage (stacker) EMAG. 2) Vertical single-spindle turning center EMAG VLC100, max. workpiece diameter: 100mm, max. workpiece height: 150mm, max. chuck diameter: 160mm, max. swing diameter: 210mm, travel X/Z: 650mm/375mm, speed: 6000rpm, rapid traverse X/Z: 60m/min/30m/min, tool stations: 12, tool holder: VDI30, control: Siemens 840D sl. 3) Vertical single-spindle turning center EMAG VLC100, max. workpiece diameter: 100mm, max. workpiece height: 150mm, max. chuck diameter: 160mm, max. swing diameter: 210mm, travel X/Z: 650mm/375mm, speed: 6000rpm, rapid traverse X/Z: 60m/min/30m/min, tool stations: 12, tool holder: VDI30, control: Siemens 840D sl. 4) Vertical hobbing machine EMAG VLC200H, max. workpiece diameter: 200mm, max. module: 4, travel X/Y/Z: 790mm/120mm/400mm, swivel range: +/-35°, control: Siemens 840D sl. 5) Vertical chamfering/deburring machine EMAG VLC100C, max. workpiece diameter: 100mm, max. workpiece height: 150mm, travel X/Z: 900mm/375mm, control: Siemens 840D sl. 6) Internal automation EMAG TrackMotion with 2x TransLift carriages. Type: transfer automation, purpose: part feeding/intermediate station transport/part removal, control: HT8. 7) O-belt automation for each EMAG machining machine with pallet and belt buffer, max. pallets: 24pieces/machine. 8) Marking press Markator for part marking. 9) Part handling unit EKF Automation in gantry design. 10) Basket stacking cell EKF Automation for the finished parts storage, number of stacks: 3. Documentation available. An on-site inspection is possible under power connection. Guedsx Dm D Iopfx Aafef

Year of construction: 2000, condition: ready for operation (used), Max. swing diameter: 300mm, swing diameter over radial slide: 190mm, travel X/Z: 175mm/300mm, turning length: 250mm. Spindle flange diameter: 120mm, spindle diameter in front bearing: 80mm, material passage: 42mm. Speed: 6000rpm, feed force X/Z: 3.6kN, rapid traverse X/Z: 24m/min. Tool positions: 12, cylindrical shank diameter: 30mm, turning tool shank height: 20mm. Quill diameter: 70mm, automatic quill stroke: 90mm, max. quill force: 8.8kN. Dimensions X/Y/Z: approx. 2300mm/2400mm/1800mm, weight: approx. 3500kg, control: Siemens Sinumerik. Including bar loading machine Breuning IRCO PROFImat. Documentation available. Godotxquhjpfx Aafsuf

Condition: ready for operation (used), Year of construction: 2023, A mobile diesel screw compressor unit CompAir, suitable for construction site use, is available. Volume flow: 20m³/min, max. operating pressure: 24bar, motor power: 224kW, engine: Cummins QSB6.7, chassis: height-adjustable, fuel tank capacity: 350l. Machine dimensions: approx. 5500mm/2000mm/2700mm, weight: approx. 3500kg. Documentation available. An on-site inspection is possible. Gusdpoxu I Ddjfx Aafof

Condition: ready for operation (used), Year of construction: 1991, A CNC vertical machining center Emco is available. Travel X/Y/Z: 420mm/330mm/400mm, table dimensions X/Y: 650mm/320mm, max. table load: 150kg, tool positions: 12, tool holder: SK40, speed: 4500rpm, rapid traverse: 12m/min. Machine dimensions X/Y/Z: approx. 2400mm/2300mm/2450mm, weight: approx. 2750kg, control: Emcotronic TM02. An on-site inspection is possible. Gjdpfjy H I H Ssx Aafsuf

Condition: used, Year of construction: 2007, spindle speed (max.): 6,000 rpm, overall weight: 2,500 kg, Fanuc 21T Spindle bore: 42 mm 12-position turret X: 130 mm, Z: 280 mm Gsdpfxeznlaie Aafsuf Weight: 2500 kg

Condition: ready for operation (used), Year of construction: 2004, Make: YAMAZAKI MAZAK U.K. LTD Gjdexk U R Nopfx Aafouf Type of machine: VTC-200C Year of manufacture: 2005 Control system: Mazatrol 640 M Machine's weight: 8.260 kg Tool holder: SK 40 x-travel: 1.660 mm y-travel: 510 mm z-travel: 510 mm Speed range: 12.000 U/min Table dimensions: 2.000 × 510 mm Number of tools in the magazine: 24 Plätze

Condition: used, TECHNICAL DETAILS - Capacity : 1900 [l] - Pump flow rate : 430 Guedpoy Dikmefx Aafof - MOTOR : 7.5 [kW] - Basket dimensions : 1790 x 800 [mm] - Payload max. : 1000 [kg] - Machine weight : 1500 [kg]