Used 2 X Engel Es 600 125 Art 597 for sale (246)

Condition: not inspected (used), Year of construction: 2000, functionality: unexamined, machine/vehicle number: 43227, total length: 6,000 mm, total width: 2,000 mm, total height: 2,000 mm, Weight approx. 9000 kg. For sale is a used machine from a site closure. Sale is made excluding any warranty for defects. The machine has not been tested but was in working order until the end. Hodpfjzqapdjx Aqtor

Condition: not inspected (used), Year of construction: 1997, operating hours: 145,298 h, functionality: unexamined, machine/vehicle number: 31378, total length: 6,500 mm, total width: 2,000 mm, total height: 2,200 mm, A used machine from a site closure is being sold. Sale is made excluding any warranty for defects. Hodpfxjzqabme Aqter The machine has not been inspected but was in working order until the end. Weight approximately 9000 kg.

Condition: ready for operation (used), Year of construction: 2000, functionality: fully functional, clamping force: 1,225 kN, controller model: CC100, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Clamping force: 125 t Horizontal cylinder: 35 Vertical cylinder: 18 MACHINE DETAILS Hedoy Exc Iepfx Aqtjr Control: CC100 EQUIPMENT 1x hydraulic core pull BAP 1x proportional hydraulic interface for index plate BAP 16x heating zones (HK) 2x magnetic clamping plates for BAP and FAP Note: When purchasing multiple items from the same location (see offers below), you will benefit from the lowest costs for dismantling and loading.

Condition: ready for operation (used), Year of construction: 1996, functionality: fully functional, clamping force: 1,225 kN, ejector stroke: 130 mm, opening stroke: 600 mm, plate length: 740 mm, plate width: 700 mm, No reserve price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Clamping force: 125 tons Opening stroke: 600 mm Ejector force: 61 kN Ejector stroke: 130 mm Max. platen distance: 950 mm Screw diameter: 35 mm Screw diameter: 30 mm Injection volume: 158 cm³ Injection volume: 98 cm³ Min. mould height: 350 mm Hodpfx Aqey Ewg Ester MACHINE DETAILS Enlarged clamping platen: 740 mm x 700 mm EQUIPMENT Rotary table Note: When purchasing multiple items from the same location (see offers below), you will benefit from the most favorable disassembly and loading costs.

Condition: ready for operation (used), Year of construction: 2000, functionality: fully functional, machine/vehicle number: 42.503, clamping force: 4,000 kN, screw diameter: 70 mm, injection pressure: 1,481 bar, injection weight: 1,040 g, overall weight: 5,600 kg, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Clamping force: 4,000 kN Platen size: 1,300 × 1,080 mm Minimum tool height: 350 mm Maximum opening stroke: 1,300 mm Screw diameter: 70 mm Injection volume: 1,155 cm³ Injection weight: 1,040 g Injection pressure: 1,481 bar Hedpszncmtjfx Aqtjr MACHINE DETAILS Electro-hydraulic system Rated power of pump motor: 45 kW Dimensions & Weight Dimensions (L × W × H): approx. 8,000 × 2,250 × 2,200 mm Weight: approx. 5,600 kg

Condition: good (used), Year of construction: 2001, Ref. no.: 18092 Manufacturer: ENGEL Type: ES 1350H 200W / 300HL-2F Year of construction: 2001 Clamping unit Clamping force: 300 ton Opening stroke: 855 mm Platen size (h x v): 1050 x 650 mm Injection unit Screw diameter: 60 +35 mm Injection volume: 735 +135 cm³ Shot weight: 662 + 122 g Injection pressure: 1834 +1620 bar Measurements and weight Dimensions: 7,75 x 2,35 x 2,6 m Machine weight: 24780 kg Further information: ENGEL ES 1350H200W/300HL-2F — 2K Injection Moulding Machine This machine from the prestigious Austrian manufacturer ENGEL, built in 2001, features a clamping force of 300 tonnes and a true 2K L-configuration in horizontal layout. Motor and Hydraulic System The machine is equipped with a powerful electric motor coupled to a high-pressure hydraulic pump group. The electric motor continuously drives the hydraulic pump, providing pressurised oil flow throughout the entire system. This pressurised oil feeds the clamping cylinder, the injection pistons of both units, and the ejector system. The thick red hydraulic hoses visible behind Unit B carry this high-pressure oil flow — both units are supplied via independent hydraulic circuits, allowing Unit A and Unit B to operate simultaneously without influencing each other. Hsdswm Iy Espfx Aqtor Operating Principle The two independent injection units are positioned at 90° to each other — in an L-shape. The mould is locked with 300 tonnes of clamping force. Unit A injects the primary material into the mould at 1834 bar. Immediately afterwards, Unit B injects the second material or colour from a 90° angle into the same mould at 1620 bar. The two materials bond at a molecular level inside the mould, cooling is completed and the ejectors push out the finished 2K part as a single piece. No gluing, screwing or assembly is required — two materials emerge as one single part in a single cycle. Applications Automotive interior and exterior trim parts, large technical plastic components, parts combining a rigid body with a soft grip surface, two-colour large-surface parts.

Condition: not inspected (used), Year of construction: 1999, functionality: unexamined, machine/vehicle number: 36567, total length: 8,000 mm, total width: 2,000 mm, total height: 2,500 mm, Weight approximately 21,000 kg Hedpfjzqagisx Aqter Linear robot including peripherals and safety fencing available. A used machine from a site closure is being sold. Sale excludes all warranty claims for defects. The machine has not been inspected but was operational until the end.

Condition: ready for operation (used), Year of construction: 2003, clamping force: 2,750 kN, screw diameter: 60 mm, injection weight: 547 g, Hydraulic injection moulding machine manufactured in 2003. This Engel ES 1050/275 HL-V features a clamping force of 275 t and a maximum platen stroke of 1200 mm. It has a screw diameter of 60 mm and a maximum injection volume of 607 ccm. If you are looking to get high-quality injection moulding capabilities, consider the Engel ES 1050/275 HL-V machine we have for sale. Contact us for further details regarding this machine. • Screw diameter: 60 mm • Injection pressure: 1725 bar • Platen dimensions: 1050 x 650 (900) mm • Tie-bar spacing: Tie-bar-less (nemá) • Max. platen stroke: 1200 mm • Min. mold height: 350 mm • Centering ring: 160 mm • Ejector pin length: 330 mm • Ejector pin internal thread: M16 • Core pulls: 2 • Air blow: 1 • Hydraulically operated nozzles: No • Pneumatically operated nozzles: No • Number of hot runners: 8 • Max. injection volume: 607 ccm • Working hours: 60,701.3 h Hodjzlrvxjpfx Aqter

Condition: ready for operation (used), Year of construction: 1996, operating hours: 105,386 h, functionality: unexamined, machine/vehicle number: 30131, total length: 8,000 mm, total width: 2,000 mm, total height: 2,500 mm, overall weight: 20,000 kg, Equipment: documentation/manual, A used machine from a site closure is being sold. Sale is made with the exclusion of any warranty for defects. Hsdpfjzmrf Njx Aqtsr The machine has not been inspected but was operational until the end. A linear robot is included, but it has never been used and was probably not programmed.

Condition: excellent (used), Year of construction: 2001, Engel ES 1350/275 HL with Engel ERC 53/1-E Robot / Machine in very good technical condition Year of manufacture: 2001 Injection unit: Screw diameter: 60 mm Shot weight: 547 g Injection pressure: 1834 bar Metering volume: 618 cm³ Clamping unit: Clamping force: 275 t Tie bar distance: 0x0 mm Platen size: 1050x900 mm Ejector: hydraulic Clamping unit: hydraulic Control system: CC 100 Additional equipment: Machine in very good technical condition Operating hours: 35,819 h in automatic mode Tie-barless machine Hydraulic core pull x 3 Hot runner control x 16 Injection unit hardened - bimetallic Machine has been regularly serviced by authorized Engel service Dimensions: Weight: 20,000 kg Length/Width/Height: 7.10x2.15x2.30 m All offered machines are started and tested by our service technicians before sale. You can request a video of the technical tests of the selected machine or participate in live technical tests at our facility in Łódź. Price: On request Hjdpezc N A Ssfx Aqter

Condition: used, Year of construction: 2005, operating hours: 70,000 h, functionality: fully functional, clamping force: 4 kN, screw diameter: 70 mm, Offer-Details: Stock-No. 14171 Manufacturer Engel Type of machine ES 2050 - 400 HL Year 2005 Working hours 70000 Controlversion CC200 Screentext German Location Eschweiler - Germany Clamping unit: Clamping force 4000 kN Size of mould platens (h x v) 1400 x 1080 mm Mould height min 350 mm Max. daylight 1300 mm Hydraulic ejector - stroke 250 mm Ejector force 83 kN Injection unit: Screw diameter 70 mm Injection pressure 1482 bar Stroke volume 1155 ccm Shot weight (PS) 1040 gr. Injection rate 419 ccm/s Screw speed 183 1/min Nozzle pressure 110 kN Electric and Hydraulic Equipment: Nominal capacity of pump motor 45 kW Dimensions and weights: Dimensions of the machine ca. 8,30 x 2,35 x 2,48 m Total machine weight 31200 kg Accessories: - Anti vibration pads - 2 x 24 zones water flower - Material hopper Hodpfju Awalex Aqtjr - degassing screw Additional Options: - Robot interface - 4 x hydraulic core pulls

Condition: ready for operation (used), Year of construction: 2002, operating hours: 14,500 h, functionality: fully functional, clamping force: 2,500 kN, screw diameter: 60 mm, displacement volume: 735 cm³, injection pressure: 1,481 bar, injection weight: 662 g, mold height (min.): 250 mm, ejector stroke: 250 mm, plate length: 650 mm, plate width: 1,050 mm, installation height: 850 mm, Machine in operational condition. Includes handling robot from ENGEL. Hodpfxjyuayrj Aqtjr

Condition: used, Year of construction: 2002, operating hours: 49,100 h, functionality: fully functional, clamping force: 450 kN, overall weight: 3,300 kg, First owner Hjdpfszal Thsx Aqtsr

Year of construction: 2003, condition: ready for operation (used), Eight Arburg injection molding machines, one Engel injection molding machine, and one Demag injection molding machine are available. 1) Arburg 270M 350-90, year of manufacture: 1996, operating hours: approx. 110000h. 2) Arburg 270M 350-90 U, year of manufacture: 1998, operating hours: approx. 108000h. 3) Arburg 270M 350-90, year of manufacture: 1992, operating hours: approx. 178000h. 4) Arburg 420C 1000-250, year of manufacture: 1995, operating hours: approx. 96000h. 5) Arburg 370C 800-225, year of manufacture: 1992, operating hours: approx. 156000h. 6) Arburg 320M 500-90, year of manufacture: 1991, operating hours: approx. 94000h. 7) Arburg 270M 350-90 U, year of manufacture: 1998, operating hours: approx. 83000h. 8) Arburg 630S 2500-675, year of manufacture: 2003, operating hours: approx. 93000h. 9) Demag Viva 100-400, year of manufacture: 1999, operating hours: approx. 116000h. 10) Engel ES 500/100 HLS, year of manufacture: 1998, operating hours: approx. 103000h. On-site inspection possible. Sale of individual machines possible. Hsdoxrf Nropfx Aqter

Condition: good (used), Year of construction: 1998, Screw diameter: 25 mm Clamping force: 25 tons Opening stroke: 350 mm Weight: 2,900 kg Immediately available from stock Hjdpfx Aqevxh Iustor

Condition: good (used), Year of construction: 1992, Clamping force: 500 kN Hodpfjvygh Njx Aqtjr Screw diameter: 30 mm Weight: 3,200 kg Available immediately from stock

Condition: good (used), Year of construction: 1995, operating hours: 44,283 h, functionality: fully functional, screw diameter: 30 mm, displacement volume: 98 cm³, injection weight: 88 g, overall weight: 5,300 kg, Angel 90 tons Hodpot Dxqtofx Aqter Incl. robot (ASS) Production in clean room.

Condition: ready for operation (used), Year of construction: 1998, functionality: fully functional, screw diameter: 45 mm, clamping force: 2,000 kN, No reserve price – guaranteed sale to the highest bidder!\n\nTECHNICAL DETAILS\n\nClamping unit: 2,000 kN\n\nScrew diameter unit 1: 45 mm\nScrew diameter unit 2: 45 mm\n\nMax. shot volume unit 1: 226 cm³\nMax. shot volume unit 2: 183 cm³\n\nMACHINE DETAILS\n\nMinimum mould installation size: 250 mm\nMaximum mould installation size: 750 mm\n\nEQUIPMENT\n2-component machine\nTie-bar-less design\n\nNote: When purchasing multiple items from the same location (see offers below), you will benefit from the most favourable disassembly and loading costs for each item. Hjdpsy Exatefx Aqtjr

Condition: ready for operation (used), Year of construction: 2005, functionality: fully functional, clamping force: 1,225 kN, screw diameter: 30 mm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Clamping force: 125 t Hedpfx Aqey Exagetjr Screw diameter: 30 mm Note: When purchasing multiple items from the same location (see offers below), you will only be charged the lowest applicable costs for dismantling and loading.

Condition: ready for operation (used), Year of construction: 1999, functionality: fully functional, clamping force: 5,883 kN, screw diameter: 90 mm, injection weight: 2,480 g, No reserve price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Clamping force: 600 tons Screw diameter: 90 mm Shot weight: 2,480 g MACHINE DETAILS Hodsy Ewtxepfx Aqtsr Platen size: 1,480 mm x 1,300 mm Minimum mould installation height: 500 mm EQUIPMENT PVC cylinder with extra screw for PP, PE Note: When purchasing multiple items from the same location (see offers below), the most favourable disassembly and loading costs will apply.

Condition: ready for operation (used), Year of construction: 1997, functionality: fully functional, clamping force: 4,903 kN, screw diameter: 80 mm, injection weight: 1,402 g, overall weight: 25,500 kg, No reserve price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Hjdpfx Aqjy Ewqwetor Clamping force: 500 tonnes Tie bar distance: 840 x 840 mm Screw diameter: 80 mm Injection weight: 1,402 g Mould height (min – max): 250 mm – 850 mm MACHINE DETAILS Machine weight: 25,500 kg Note: When purchasing multiple items from the same location (see offers below), the most favourable costs for dismantling and loading will be applied.

Condition: ready for operation (used), Year of construction: 1999, functionality: fully functional, clamping force: 2,451 kN, screw diameter: 70 mm, displacement volume: 1,000 cm³, injection weight: 901 g, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Clamping force: 250 tons Screw diameter: 70 mm Hedpfx Aqoy Ewd Rster Shot volume: 1,000 cm³ Injection weight: 901 g MACHINE DETAILS Enlarged mounting platen: 1,050 x 900 mm Note: When purchasing multiple items from the same location (see offers below), the more favorable costs for dismantling and loading will be waived accordingly.

Condition: good (used), Year of construction: 2013, Ref. no.: 18494 Manufacturer: ENGEL Type: Victory 50-200 Spex Year of construction: 2013 Clamping unit Clamping force: 50 ton Opening stroke: 400 mm Mould height min.: 200 mm Opening width: 600 mm Platen size (h x v): 500 X 450 mm Injection unit Screw diameter: 25 mm Injection volume: 69 cm³ Shot weight: 62 g Injection pressure: 2400 bar Measurements and weight Dimensions: 3,4 x 1,3 x 1,8 m Hodpfx Ajxzq Sksqtjr Machine weight: 2900 kg Additional information & extras Core pull: 1 pcs Further information: ENGEL ENGEL Victory 50 SPEX (2013) – Tie-Barless Injection Moulding Machine For sale is a high-quality ENGEL Victory 50 SPEX injection moulding machine from 2013. Featuring tie-barless technology and a special SPEX configuration, this machine is ideal for precise and flexible production. Key Advantages: Tie-barless design → maximum mould accessibility SPEX special configuration → optimized for specific applications High precision & repeatability Energy-efficient operation Compact design → space-saving Automation-ready (robot interface possible) Applications: Automotive industry Electronics Medical parts Technical plastic components 👉 Machine in good working condition. Inspection possible upon request.

Condition: ready for operation (used), Year of construction: 2001, functionality: fully functional, Beschreibung: 1,0 St. gebr. Zweikomponenten Spritzgießmaschine mit Roboter Hersteller: ENGEL Typ: ES650H/200W-200HL-2F Baujahr: 2001 Schließkraft: 200 Tonnen Holmabstand Holmlos Hedszl T Snjpfx Aqtor Einbauhöhe min.: 550 mm Öffnungsweg: 700 mm Schnecken DN 1: 40 mm Max. Hubvolumen: 251 cm³ Spritzteilgewicht in PS: 216 g Schnecke DN 2: 25 mm Max. Hubvolumen: 69 cm³ Spritzteilgewicht in PS: 60 g Steuerung: CC200 Technische Ausstattung: -Roboter Engel, Typ: ERC23/1-E -4 Stück Kernzüge -Drehtischsteuerung

Year of construction: 2005, condition: used, fuel type: electric, Chassis, electric motor, DC motor, traction motor, drive motor, steering motor Hodpfei Aqa Aex Aqtjr -Manufacturer: Engel, steering motor from Jungheinrich ESE 320 G 20-240.54 electric stacker -Type: GNM 5460-G18.5-MIR1 Ser. H -Motor: 24V/240W -Dimensions: 135/130/H365 mm -Weight: 8 kg