Used Cnc Vertical Milling Center for sale (28,430)

Condition: like new (used), Year of construction: 2023, operating hours: 343 h, functionality: fully functional, machine/vehicle number: G3791-0010, turning length: 705 mm, turning diameter over cross slide: 290 mm, turning diameter: 230 mm, spindle motor power: 20 W, spindle speed (min.): 10 rpm, spindle speed (max.): 6,000 rpm, spindle bore: 51 mm, travel distance X-axis: 190 mm, travel distance Z-axis: 700 mm, rapid traverse X-axis: 20 m/min, rapid traverse Z-axis: 40 m/min, bar diameter (max.): 51 mm, overall weight: 8,200 kg, • High-performance, integrated spindle motor • High productivity through simultaneous use of the upper and lower turrets • Robust BMT turret • Integrated machining through synchronized control of the main and counter spindle Specifications: • Max. turning diameter 230 mm • Max. turning length 705 mm • Chuck size, main/auxiliary 6" / 6" Ledpfx Alozd Dizj Iehh • Drive type: Integrated • Spindle speed 6,000 rpm • Spindle power 15/11 kW • Spindle torque 208/140 Nm • Travel distances (X1/X2/Z1/Z2/ZB) 65/195/700/720/700 mm • Rapid traverse (X1/X2/Z1/Z2/ZB) 20/20/40/40/40 m/min • Guide type: LM (linear motion) • Number of tools 2 x 12 • Tool size 20/32 mm • Milling spindle speed 5,000 rpm

Condition: ready for operation (used), Year of construction: 2009, functionality: fully functional, CNC Turning and Milling Center - DMG GILDEMEISTER - CTX gamma 1250 TC Lhsdpfew Hg Nlsx Al Ish YOM: 2009, until 2011 showroom machine, from 2012 operating The machine can be inspected by appointment in the factory under power. Condition: Good (high accuracy), ready for immediate use. Spindle hours (August 1st, 2025): 9.580 h The heart of the machine is the integrated traveling column with turning milling spindle and interpolating B-axis. Machine basic data: * Part hollow clamping device (hydraulic) * C-axis * Cross slide above with turning/milling spindle as motor spindle, with hydraulic clamping in turning, tool holder: Capto C6 * Y-axis: +/- 200 mm * B-axis: +/- 120° * Disc-type tool magazine * Absolute, direct measuring systems in X-, Y-, Z1-axis * USB-interface, Ethernet interface TECHNICAL SPECIFICATIONS: * Control: Heidenhain CNC Pilot 4290, 3-D path control TURN PLUS Working area: * Swing diameter over bed: 630 mm * Turning diameter: 630 mm * Spindle distance: 1.510 mm * Bar diameter max.: 65 mm Main drive I: * Drive power (100% / 40% ED): 24 / 34 kW * Speed range from - up to: - 5.000 rpm * Speed of the C-axis: - 5.000 rpm Turning/milling spindle: * Tool holder: Capto C6 * Spindle speed: - 12.000 rpm * Drive power (100% / 40% ED): 13.2 / 22 kW * Torque (100% / 40% ED): 60 / 100 Nm Tool magazine: * Number of tools: 36 * Dimensions of the machine approx. (Width/Depth/Height): 6.860 x 4.220 x 2.530 mm * Total weight of the machine approx.: 18,5 tons EQUIPMENT: * Well equipped … * No steady rest available * Documentation complete available. Detailed technical data sheet and information on equipment available on request. There is no guarantee for correctness and completeness of the technical details and and accessories.

Condition: used, Year of construction: 2005, Technical details: turning diameter: 275 mm turning length: 900 mm spindle passage: 65 mm power capacity at 100 % load: 25/20 kW spindle turning speed range: 1 - 5000 U/min spindle diameter in front bearing: 110 mm c-axis: 1 - 500 U/min. number of workpiece supports: 4 tool turret: 1 x-axis: 290 mm y-axis: 165 mm z-axis: 360 mm b-axis: 360 ° rapid speed: 18/30 m/min number of tools: 2x2 + 2x2 number of driven tools: 2x2 + 2x2 mm toolpiece turning speed range: 8000 / 2000 U/min power capacity: 25% ED 5,8 kW tool taper: TRAUB 60 tool turret: 2/3/4 x-axis: 170 mm Lhsdpswp D Nbsfx Al Ish z-axis: 600/950 mm y-axis: +/- 60 mm rapid speed: 18/15/30 m/min number of driven tools: 10 mm toolpiece turning speed range: 1 - 6000 U/min power capacity: 25% ED 5,8 kW tool taper: DIN 69880 40 x 63 total power requirement: 95 kW weight of the machine ca.: 16 t dimensions of the machine ca.: 10,0 x 3,5 x 3,0 m with CNC TRAUB TX 8i, Barloader TRAUB Stamag DNH61 / 3000, Main and Sub spindle with C-axis 1 support with B-axis 3 turret supports dust exhauster, coolant attachment with coalescence-seperator and chip conveyor 2 pc. 3-jaw chuck SMW KNCS-N 170-43 2 pc. HAINBUCH Spanntop chuck 40 pc. various tool holder non-driven 6 pc various tool holder driven Spare parts package *

Condition: good (used), Year of construction: 2002, Ref. -No.: 10633 Manufacturer: ANAYAK Type: VH Plus 2000-MG Year of construction: 2002 Type of control: CNC-Steuerung Control: Heidenhain Storage location: Halberstadt Country of origin: Germany serial number: M200XXX Lhodpfx Aozc D Ensl Ieh X-Travel: 2000 mm Y-Travel: 1500 mm Z-Travel: 1500 mm No. Of Working Stations: 90 Control: 106.253 H machine: 93.170 H Program run: 41.859 H Head and turntable: 1600 x 1450 mm

Condition: excellent (used), Year of construction: 2008, operating hours: 51,226 h, functionality: fully functional, rotational speed (max.): 5,000 rpm, Control: HEIDENHAIN Plus iT with Turn Plus Turning length: 1175 mm (with tailstock 1100 mm) Tool holder: HSK 63A (DIN 69893) Tool magazine: 1 x 36-position disc magazine Lsdpfey Niziex Al Ishh

Condition: excellent (used), Year of construction: 2015, 1000mm Swing, 760mm max. machining diameter, 1540mm max turning length, 4000rpm main spindle, 76mm bar capacity, 12000rpm milling 18.5kW, C axis 0.001 degrees, Y axis -/+115mm, 40 station ATC, 12 station lower turret, Ljdsw I Tnijpfx Al Iehh milling speed 4,000rpm, 22kW spindle motors, FANUC 31i control, 3 Jaw Power Chuck, Swarf Conveyor, Coolant

Condition: good (used), Year of construction: 2006, functionality: fully functional, Technical details turning diameter 660/275 mm turning length 1498 mm control Fanuc/Mori Seiki MSX 701 total power requirement 90 kVA weight of the machine ca. 26,6 t dimensions of the machine ca. 5301 x 2997 x 2788 mm Additional information 9-axis CNC turning and milling centre * Fanuc MSX-701 CNC control * Milling spindle at top (B axis), as full 4th axis, positioning 0.0001 deg. * 40-position tool magazine * 10-position turret at bottom, all positions driven * 2 x 3-jaw quick-change chuck KNCS-N 315/91 * KNOLL high-pressure coolant system, pressure setting 12/25/35/45/55/62 and 72 bar, with maintenance-free rotary filter system * Chip conveyor * Drain system for main spindle chuck (controlled via M function) * Drain system for tool cutting edge (controlled via M function) * Coolant gun incl. accessories * Oil mist extraction * Direct measuring system X1, X2, Y-axis * Bar loader interface * Double foot switch for both spindles * Islands and pocket programming for MAPPS * High-speed fixed cycle for MAPPS * Programm memory extension to 8 MB * Programm restart * 3-stage signal lamp * 512 MB memory card (CF card) Swing diameter over cross slide (tool spindle 1): 750 mm Swing diameter over cross slide (turret 2): 400 mm Max. turning diameter (tool spindle 1): 660 mm Max. turning diameter (turret 2): 275 mm Max. machined workpiece length: 1498 mm Max. bar material: 90 mm Travels: X1 axis (tool spindle): 750 mm Y axis (tool spindle): 420 (+/- 210) mm Z1 axis (tool spindle): 1635 + 100 mm for tool change B axis (tool spindle): +/- 120 deg., full B-axis 1 deg. indexed and 0.0001 deg. braked X2 axis (turret): 195 mm Z2 axis (turret): 1525 mm SZ axis (subspindle): 1610 mm Rapid traverse: (X1,Z1) 50 m/min. / (Y,X2,Z2,SZ) 30 m/min. Main and subspindle: Spindle speeds infinitely variable (spindle 1 + 2): 30-3000 rpm. C axis (spindle 1 + 2): 0.001 deg. Main spindle motor: 22/18.5 kW Subspindle motor: 22/18.5 kW Torque (spindle 1 + 2): 1000 Nm Disc turret: Number of tool positions: 10 Speed of driven tools: 6000 rpm. Drive power: 5.5/3.7 kW Milling spindle head: Tool holder: HSK A63 Max. speed: 12,000 rpm Drive power: 18.5/11 kW Torque: 120/44 Nm Tool changer: 40-stations Tool diameter 70/140 mm Tool length 400 mm Tool weight 8/10 kg Total power requirement 90 kVA Main dimensions Length x width x height 5301 x 2997 x 2788 mm Machine weight 26.6 t Accessories: Measuring arm (picture) tool measurement in machine Tool holder + box, reduction sleeves, driven tools Clamping jaws package Collets package Lsdpfx Alszabltj Iehh

Condition: used, Year of construction: 2017, Technical details: Ljdpfx Aezb Rh Hjl Iohh turning diameter: 340 mm turning length: 1000 mm control: OSP 300 LA swing diameter over cross slide guide: 470 mm swing diameter max. over bed cover: 580 mm travel -x axis: 260 mm travel -z axis: 1065 mm rapid travel - longitudinal/face: 30 / 25 m/min bar material dia.: 52 mm spindle diameter: 80 mm Spindle RPM: 5000 1/min spindle drive: 22 / 15 kW turret stations / rotary tool stations: 12/12 VDI 40 : 7 kW speed of driven tools: 6000 1/min Tailstock Travel: 1015 mm tailstock quill taper MT: 5 total power requirement: 38,7 kVA weight of the machine ca.: 6500 kg dimensions of the machine ca.: 4 x 2,5 x 2 m Accerories Chip conveyor Signal lamp 2 colors manual tool eye High precision Turning and Milling Centre with turret for milling tools and main spindle with C- axis. The Stiefelmayer mandrel for inside clamping of hollow shafts can b e replaced by regular 250 mm Kitagawa chuck. Machine can be shown undeer power *

Condition: used, Year of construction: 2000, Gildemeister CNC universal lathe Type/Model: CTX 600 E Condition: Used Operating hours: 99,831 h Year of manufacture: 2000 Technical data Lsdpszdrrkjfx Al Iohh Swinging diameter: 680 mm Distance between centers: 2000 mm Spindle speed: 2800 rpm Chuck: Ø 315 mm Tool turret: 12 stations; incl. 3 stations for driven tools Tool holder: VDI 50 Tailstock: NC-controlled Dimensions approx. 5560 x 240 x 213 mm Weight approx. 10,000 kg Equipment: - Power chuck, type SMW Autoblok 315 BH-FX, Ø 315 mm - Control system: Heidenhain CNC Pilot

Condition: excellent (used), Year of construction: 2024, MAZAK INTEGREX i-100H Max. machining diameter: 600 mm Max. machining length: 590 mm Max. milling speed: 12,000 rpm Max. spindle speed: 6,000 rpm Lsdpfx Asy Hwn Esl Iehh Machine is equipped with: - CNC control Mazatrol SmoothAi - Tool magazine for 74 tools - KITAGAWA 3-jaw chuck B-206, diameter 169 mm - Tool Eye - C-axis input accuracy 0.0001° - Y-axis - B-axis 0.0001° - 5-axis machining package for SmoothAi - Reinforced coolant pump 15 bar - Chip conveyor, side discharge

Condition: excellent (used), Year of construction: 2016, functionality: fully functional, turning length: 510 mm, turning diameter: 360 mm, spindle speed (max.): 5,000 rpm, spindle bore: 76 mm, travel distance X-axis: 260 mm, travel distance Y-axis: 100 mm, travel distance Z-axis: 590 mm, bar diameter (max.): 66 mm, CNC turning and milling center DMG MORI NLX 2000 / 500 SY Year of manufacture: 2017 Control system: Celos with Mitsubishi M 7300 Main spindle speed: 0 - 5,000 rpm Drive power: 11/15 kW Counter spindle speed: 0 - 4,500 rpm Drive power: 7.5/11 kW Bar diameter, main spindle: 66 mm Bar diameter, counter spindle: 43 mm X-axis: 260 mm Y-axis: +/- 50 mm Z-axis: 590 mm Turret: 20 stations Speed: 0 - 10,000 rpm Drive power: 3.5/5.5 kW Lhedpfszfguvox Al Ieh Accessories: - Tool measurement system - Chip conveyor - Bar feeder LNS - Workpiece collection tray

Condition: reconditioned (used), Year of construction: 2010, operating hours: 31,600 h, functionality: fully functional, machine/vehicle number: 3078, Travel range Z = 400 mm Y = 200 mm X = 410 mm Power / thrust force Z-Y 2.5 kW / 550 daN (linear motor option = 7.2 kW / 350 daN) X 4.8 kW / > 550 daN X-Y-Z Travel speed 40 m/min (linear motor option = 50 m/min) X-Y-Z-W Acceleration 8 m/s2 / 0.8 g (linear motor option = 10.4 m/s2 / 1.1 g) X-Y-Z-W Resolution 0.0001 mm MAIN SPINDLE + C1 Power 7.5 kW Torque / peak 22 / 28 Nm Measuring system direct Resolution 0.0001° Accuracy 0.001° Bar passage Ø 32 mm Turning spindle speed 72,000°/min Turning clamping force 4,900 N at 6 bar AXIS B (TILT AXIS OF TOOL HOLDER SPINDLE) Power 4.3 kW Torque / peak 119 / 226 Nm Angular travel -25° / +115° Measuring system direct Resolution 0.0001° Accuracy 0.001° Rotational speed 36,000°/min Supporting torque 200 Nm TOOL HOLDER SPINDLE Power 5 kW Torque 6 to 800 min-1 Max. speed 30,000 min-1 Clamping force of the tool holder 2,000 N Blocking torque mechanical blocking via straight-tooth gearing Tool shank taper HSK 40 (A or E) Tool clamping power 1000 daN TOOL CHANGER Number of stations 30 (for HSK 40) CNC control Fanuc 30i/31i type Y-axis (transverse axis) Travel 200 mm Power 4.8 kW Feed power 240 daN Resolution 0.0001 mm Max. rapid traverse G0 50 m/min Max. feedrate G1 20 m/min Measuring system glass scale Z-axis (longitudinal axis) Travel 400 mm Power 7.2 kW Feed power 360 daN Resolution 0.0001 mm Max. rapid traverse G0 50 m/min Max. feedrate G1 20 m/min Measuring system glass scale Includes coolant unit 8 kW and integration of an emergency stop system. Inventory no. 2220114, machine comprising: CONTROL Fanuc 30i/31i, with 14’’ screen LINEAR MOTOR FEED OPTION for Y and Z axes TURNING-MILLING FUNCTION with integration of an indexing system (8 positions) on the tool holder spindle, Lodeyf Angopfx Al Ijhh transformation of the tool magazine for HSK40-A tool holders, increase of the spindle speed to 5500 min-1 4-POSITION PART RECOVERY UNIT “PRM” FOR MACHINING THE 6TH FACE: In idle state, the unit is located protected under the main C1 spindle. The recovery unit moves on the W-axis, which is parallel to the C-axis. Max. speed W-axis: 40 m/min. Travel on W-axis: 310 mm. With 2 vices – power at 5 bar: 3500 N 1 tailstock INCREASED SPINDLE PASSAGE increase from 1 to 50 mm (main spindle) TOOL MEASUREMENT DEVICE “RENISHAW” T27 Measurement of the length of the turning tool. Routine detection by M-code. Automatic tool breakage monitoring. TOOL MAGAZINE EXTENSION Increase in the number of tools from 30 to 60 stations COOLANT THROUGH THE SPINDLE 100 bar, 25 L/min, 400 L tank ADAPTATION AND PREPARATION OF HP THROUGH THE MILLING SPINDLE Mechanical and electrical integration of the turning clutch. PART UNLOADING CONVEYOR Output to the left of the machine PAPER BAND FILTER SYSTEM CLAMPING SYSTEM FOR F-48 CLAMPS ADAPTATION FOR W-20 CLAMPS PREPARATION FOR INTEGRATION OF A BAR FEEDER Subject to errors and omissions, the technical specifications are provided without commitment.

Condition: used, Year of construction: 2015, Technical details: turning diameter: 340 mm turning length: 1000 mm control: OSP 300 LA swing diameter over cross slide guide: 470 mm swing diameter max. over bed cover: 580 mm travel -x axis: 260 mm travel -z axis: 1065 mm rapid travel - longitudinal/face: 30 / 25 m/min bar material dia.: 52 mm spindle diameter: 80 mm Spindle RPM: 5000 1/min spindle drive: 22 / 15 kW turret stations / rotary tool stations: 12/12 VDI 40 : 7 kW speed of driven tools: 6000 1/min Tailstock Travel: 1015 mm tailstock quill taper MT: 5 total power requirement: 38,7 kVA weight of the machine ca.: 6500 kg dimensions of the machine ca.: 4 x 2,5 x 2 m Accerories Chip conveyor Signal lamp 2 colors manual tool eye Lhjdpfx Aezbzv Ijl Ioh High precision Turning and Milling Centre with turret for milling tools and main spindle with C- axis. There are 4 machines available with Robot loading and one machine without Robot. The Stiefelmayer mandrel for inside clamping of hollow shafts can b e replaced by regular 250 mm Kitagawa chuck. Machines can be shown undeer power *

Condition: used, Year of construction: 2001, Technical details: turning diameter: 33 mm Ledpfx Aljw D Hh As Iehh turning length: 330 mm control: 840 total power requirement: 20 kW weight of the machine ca.: 6 t dimensions of the machine ca.: 3850,2000,2100 m 17 axes 3 revolvers with the powered tools 1 gantry with the driven tools Main and counter spindle with C axes Barfeeder Machine On-time 58,133 hours *

Condition: excellent (used), Year of construction: 2019, CNC turning and milling center Machine type: PUMA TT1300SYYB Control: Fanuc Year of manufacture: 2019 Commissioning: 2024 Operating hours: >1,000 h Lhedpezcdmljfx Al Ieh TECHNICAL DATA: Max. turning length: 120 mm Turning diameter: 175 / 175 mm Travel distances: X-axis: 135 mm Y-axis: 80 mm Z-axis: 530 mm Main spindle Max. speed: 6,000 rpm Drive power: 15 kW Torque: 116 Nm Counter spindle Max. speed: 6,000 rpm Drive power: 11 kW Number of turrets: 2 Tool positions: 12 + 12 Powered tools Speed of powered tools: 6,000 Equipment features: Chip conveyor High-pressure pumps: 30 bar Various tool holders

Condition: used, Year of construction: 2012, turning diameter 350 mm turning length 650 mm control 840 D SL ShopTurn Siemens greates pass round over bed 385 mm Swing dia. over traverse guideway 350 mm turning speed range - main spindle 0 - 4.500 min/-1 power capacity - main spindel 11,5 / 8 kW max. Torque 340 Nm spindle diameter in front bearing 130 mm spindle bore 87 mm bar material dia. max. 65 mm max. chucking diameter 250 mm spindle head 170 h5 number of toolpositions 12 pos. Shank diameter DIN 69880: 30 mm Number of driven toolspositions 6 pos. Spindle speed - driven tool stations max. 4.500 min -1 power capacity driven tool-stations 5,5 kW x-axis 255 mm z-axis 800 mm tailstock 680 mm taper of center MK 4 clamping capacity 6,8 kN feed speeds 0 - 30.000 mm/min rapid traverse ( X / Y / Z ) 30 / - / 30 m/min Feed force ( X / Y / Z ) 4,5 / - / 6,2 kN total power requirement 28 kW weight of the machine ca. 3,3 t dimensions of the machine ca. 5,0 x 2,5 x 2,3 m CNC Universal Lathe GILDEMEISTER - NEF 400 V3 - C-Axis - Tool-Drive Ljdpfx Aey E Tvvel Iohh - only ca. 8093h Spindle hours - incl. 1x workbench - incl. 1x tool cabinet - incl. 1x cabinet for VDI tool holders - incl. 8x tool holders - incl. 4x driven tools (2 radial, 2 axial)

Condition: used, Year of construction: 2008, turning diameter max. 420 mm turning length 713 mm control MSX 850 III MAPPS Mitsubishi swing over bed 995 mm Swing dia. over traverse guideway 825 mm max. turning diameter 420 mm max. bar capacity 90 mm turning speed range - main spindle max. 3.000 min/-1 power capacity - main spindel 30 / 25 kW spindle nose JIS A2-8 spindle bearing diameter 160 mm Lsdpfxezb N Ulo Al Iohh spindle bore 105 mm max. bar capacity 90 mm C-Axis 0,001 ° x-axis 280 mm z-axis 820 mm Tooling 12 Pos. Schank height for square tool 25 mm Diameter of boring bar 50 mm turret change time 0,3 sec. Spindle speed - driven tool stations max. 6.000 min -1 power capacity driven tool-stations 5,5 / 3,7 kW rapid traverse X-axis 30 m/min rapid traverse Z-axis 30 m/min rapid traverse C-axis 300 min/-1 tailstock 734 mm diameter of quill 110 mm taper of center MK 5 total power requirement 46 kVA weight of the machine ca. 6,0 t dimensions of the machine ca. 5,0 x 3,0 x 2,5 m CNC - Turning- and Milling Center MORI SEIKI - NL 3000 MC / 700 - Operating time: approx. 9,595 hours - Processing time: approx. 7,552 hours - WITHOUT extraction system

Year of construction: 2008, condition: good (used), Parts shown by hand not included. 12.000 rpm Ljdpfx Aljpmtzhs Ijhh X 610 mm Y 420 mm Z 450 mm

Condition: excellent (used), Year of construction: 2012, operating hours: 14,901 h, functionality: fully functional, DMG MORI / GILDEMEISTER CTX beta 1250 TC 4A CNC turning/milling center DMG CTX beta 1250 TC 4A, manufactured in 2012. The machine is equipped with a Siemens 840D / ShopTurn 3G control system and features a main and counter spindle, B-axis, Y-axis, upper milling spindle, and a lower turret. Current operating hours are approximately 14,901 hours, and current spindle hours are approximately 5,000 hours. The machine is still connected to the utilities and can be inspected by appointment. Condition: Exceptionally Good / Superbly Maintained Technical Specifications Process: Turning / Milling / Complete Machining Machine Type: CTX beta 1250 TC 4A Lhedpfozbg Txjx Al Ieh Year of Manufacture: 2012 Weight: approx. 16,000 kg Power: 85 kVA Control System: Siemens 840D / ShopTurn 3G Main Spindle / Counter Spindle: 1 x FNC 250 each, up to 5,000 rpm Main Spindle: Hainbuch SpannTop nova Modular 80 HS Internal Clamping Device: Diameter 77 mm GS Partial Internal Clamping Device: Diameter 67 mm x 700 mm Coolant System Pressure: 8 / 20 / 40 / 80 bar Short Bar Loader Magazine: IRCO ILS-RBK 100/16 Upper Milling Spindle: HSK-63A, 24-position disc magazine Travel Ranges Upper Unit: B-axis +/-110 degrees, Y-axis +/-100 mm, X-axis 450 mm, Z-axis 1,200 mm Lower Turret: VDI 40, 12 tool positions, X-axis 195 mm, Z-axis 1,200 mm Additional: Turret collet chuck SMW SLU-X-2-ZS 8-101 mm Footprint: approx. 9,200 x 2,600 mm including exhaust filter system, chip conveyor, and bar storage Video recordings + extensive photo collection available upon request via WhatsApp.

Condition: used, Year of construction: 2008, Machine Year of Manufacture Bar Loader Additional Information Hours Twin 42 2004 Irco Breuning SIMAG Hydraulic line defective at turret 1 or 2 79593 25020 Twin 42 2004 Irco Breuning SIMAG Dina module removed, pressure clamp (indicates collet is not closed) 69573 9625 Twin 42 2004 Irco Breuning SIMAG Machine operational and in production 72402 8375 Twin 42 2004 Irco Breuning SIMAG Main spindle defective with bearing damage, spindle clamp defective, LT module missing, Dina module missing Lhedpfxezfzb Rj Al Ioh Twin 42 2008 Irco Breuning SIMAG Machine operational and in production 5104 83790 Twin 42 2008 Irco Breuning ECO Profi multi-channel changer Machine operational and in production 99825 76595

Condition: used, Year of construction: 2020, operating hours: 17,031 h, machine/vehicle number: 00830004341, Catalog No.: 2.2, as a twin-spindle machine, SIEMENS 840D sl Operate control system, max. speed of turning and milling spindle: 10,000 rpm, max. drive power: 20 kW, max. torque: 120 Nm (100% ED), largest turning diameter: 360 mm, largest turning length: 1,200 mm, bar capacity: 102 mm, Capto C6 tool changer, tool magazine chain with 80 magazine positions, Y-axis travel: +/- 120 mm for eccentric machining, swivel range of the B-axis: +/- 110°, special equipment: hydraulic self-centering steady rest (25-199 mm), counter-spindle with tailstock function, fine chip removal system for cast iron machining, groove milling function, connection to central oil mist extraction system, external programming option via Mastercam, chip conveyor, subject to prior sale. Ljdpsy T Nw Ejfx Al Iohh

Condition: used, Year of construction: 2020, operating hours: 13,641 h, machine/vehicle number: 00820028701, Catalog No.: 2.3, as a twin-spindle machine, with SIEMENS 840D sl Operate control system, max. speed of turning and milling spindle: 10,000 rpm, max. drive power: 20 kW, max. torque: 120 Nm (100% duty cycle), largest turning diameter: 360 mm, largest turning length: 800 mm, bar passage: 102 mm, Capto C6 tool changer, tool magazine chain with 80 magazine slots, Y-axis travel: +/- 100 mm for eccentric machining, swivel range of the B-axis: +/- 110°, special equipment: counter-spindle with tailstock function, groove stop function, connection to a central oil mist extraction system, external programming option via Mastercam, chip conveyor, subject to prior sale. Ledpey T Nxcofx Al Iehh

Condition: excellent (used), Year of construction: 2023, functionality: fully functional, turning length: 111,111 mm, We offer you the following: Manufacturer: DMG MORI Model: NTX 3000/1500 Year of manufacture: 2023 Control: DMG Mori Celos with Fanuc F31iB5 Technical specifications: Max. turning diameter: 670 mm Turning length: 1,519 mm Bar capacity: max. 102 mm Travels: x1-axis: 675 mm y-axis: +/- 150 mm z1-axis: 1,562 + 164 mm b-axis: +/- 120° a-axis: 1,542 mm x2-axis: 200 mm y2-axis: +/- 40 mm z2-axis: 1,542 mm Main spindle: Max. speed: 3,000 rpm Drive power: 30/25 kW Torque: 1,194/995 Nm Spindle nose: JIS A2-8 Spindle bore: Ø 111 mm Counter spindle: Max. speed: 4,000 rpm Drive power: 18.5/18.5/15 kW Torque: 599/505/409 Nm Lhsdpfx Aey Sfx Njl Ijh Spindle nose: JIS A2-8 Spindle bore: Ø 91 mm Milling spindle: Speed range: 0 – 12,000 rpm Drive power: 28/23 kW Torque: 132/95.3 Nm Tool holder: Capto C6 Number of tool stations: 76 positions Max. tool diameter: Ø 70/Ø 130 mm Max. tool length: 400 mm Max. tool weight: 8 kg Turret: Number of tool holders: 12 positions Speed of driven tools: 12,000 rpm Tool holder: BMT40 Torque: 16.9 Nm Rapid traverse speeds: x-axis: 50 m/min y-axis: 40 m/min z-axis: 50 m/min a-axis: 36 m/min x2-axis: 25 m/min y2-axis: 18 m/min z2-axis: 40 m/min b-axis: 100 rpm Operating hours: approx. 4,500 h Spindle hours: approx. 2,200 h Technical features & accessories: − Hydraulic 3-jaw chuck, manuf. SMW KNCS-N-400-128 incl. hollow clamping cylinder for main spindle − Hydraulic 3-jaw chuck, manuf. SMW KNCS-N-260-78-3Z incl. hollow clamping cylinder for counter spindle − Foot switch for chuck operation − Automatic clamping stroke monitoring of the clamping cylinder for main and counter spindle − Tailstock function for counter spindle − Magazine-side control panel for the tool magazine − Coolant: water-soluble coolant − Chip conveyor (right discharge) − Coolant temperature control/coolant chiller − Coolant spray gun − Float switch for coolant − Coolant shower at main and counter spindle chucks − Compressed air blow-off system for chuck (counter spindle) − Oil mist separator zeroGOF #2 − Oil separator − ICS 70 bar, TMF300 band filter system, 980 l tank − Manual tool presetting device for main and counter spindle − Direct measuring system in x1, x2, y, z1, z2 axes − Spindle sensor measuring system with wireless signal transmission, manuf. Renishaw RMP600 − Universal filter − 3D quickSET − Cycle Alternating Spindle Speed − Cycle "Tailstock Tip at Turret" − Cycle MPC – Machine Protection Control − Cycle MVC – Machine Vibration Control − Synchronous thread cutting without compensating chuck − Increased input resolution to 0.0001 mm − Cs control for tool spindle − Program restart Accessories, illustrated tools, and clamping devices are only included if specified in the additional information. Technical data and details subject to change, errors and prior sale excepted!

Condition: used, Year of construction: 1995, Machine in parts for sale spare parts ..... CNC lathe, make GILDEMEISTER Type: CTX 600, year 1995 Forkardt chuck 315 mm, tool turret Tailstock, steady rest Headstock Guide covers and sheets Ljdpfxjnximue Al Ishh Motors Machine in individual parts for sale ..... Please ask what you need and we will send you an offer.

Condition: good (used), Year of construction: 1996, CNC turning center TRAUB Type:TNC65 DG Year 1996 Control TRAUB TX8F With lots of accessories. Ljdpfx Alsu Eug Ie Ishh