Used Holzher Evolution 7405 for sale (150)

Condition: excellent (used), Machining Centre HOLZ-HER Evolution 7405 - used - Through-feed processing, 4-sided edge trimming possible, automatic suction cup positioning, hardened, dust-protected prism guides, ball screw drives on all axes, network card for remote maintenance, integrated control cabinet, control cabinet cooling with heat exchanger, manual control device, saw unit for grooving in the X direction, pick-up tool changer ----- Technical Data ----- Minimum workpiece length X: 200 mm Minimum workpiece width Y: 70 mm Minimum workpiece thickness: 8 mm Maximum workpiece length X: 3,200 mm Maximum workpiece width Y: 920 mm Maximum workpiece thickness: 70 mm Machine control software: CAMPUS HOPS Main spindle motor power: 6.5 kW Main spindle speed: 1,000 - 18,000 rpm Main spindle mount: HSK-F63 Drilling unit motor power: 1.7 kW Drill spindle mountings: M10, precisely fitted 11 mm Number of vertical drill spindles: 9 pcs Number of horizontal double drill spindles in X direction: 2 pcs Number of horizontal double drill spindles in Y direction: 1 pc Saw blade diameter of saw unit: 120 x 20 mm Number of tools in changer: 6 pcs Bsdpexddhksfx Abbsdk Extraction connection diameter: 2 x 120 mm + 1 x 140 mm Required air volume flow: 4,100 m³/h Required static negative pressure: 2,500 - 3,000 Pa Required air velocity: 30 m/s Compressed air connection: 6 bar Compressed air requirement: 300 NL/min Dimensions (LxWxH): 3,673 x 1,924 x 2,340 mm Quality info: - Completely basic cleaned - Electrical system checked - Pneumatics checked - Adjusted according to manufacturer specifications - Immediately ready for operation

Condition: excellent (used), Year of construction: 2014, operating hours: 8,969 h, functionality: fully functional, travel distance X-axis: 3,200 mm, travel distance Y-axis: 920 mm, travel distance Z-axis: 70 mm, rapid traverse X-axis: 68 m/min, rapid traverse Y-axis: 68 m/min, rapid traverse Z-axis: 68 m/min, spindle speed (max.): 24,000 rpm, number of spindles: 15, TECHNICAL DETAILS Machining dimensions Max. Workpiece size: 3,200 mm x 920 mm x 70 mm (without additional support) Min. workpiece size: 200 mm x 70 mm x 8 mm Milling and drilling capacities Milling (minus milling cutter radius): 1,500 mm Complete machining depth: 1,300 mm Number of spindles (9 vertical / 6 horizontal): 15 spindles, incl. sawing unit for grooving in X-direction Milling spindle Power: 7.5 kW Tool holder: HSK Speed range: 1,000 - 24,000 rpm Linear changer: 6-fold X-Y changer: Yes Tool dimensions Tool diameter: Ø 110 mm Tool length: 80 mm Feed and speed Infeed guide: Height-adjustable for 4-sided routing and profiling Bdedpsu R N Rljfx Abbek Feed speed: 68 m/min Safety standards CE conformity: Yes Material handling Solid roller conveyors: Yes Stops: 2 stops Workpiece clamping: Fully automatic positioning vacuum suction cups, ECOMODE MACHINE DETAILS Software: CAMPUS / NC-Hops, incl. aCADemy CAD/ CAM module machine license Dimensions L x W x H: 3,675 x 2,470 x 1,660 mm Weight: 2,200 kg Suction connections: 2 x Ø 120 mm + 1 x Ø 140 mm

Condition: new, HOLZ-HER 7405 EVOLUTION CONNECT machining center -Exhibition machine- This offer is an equipment package. The following items and options are already included in the price: - Material support - Height-adjustable infeed roller conveyor - EVOLUTION diamond formatting cutter set - CAMPUS V8 EVOLUTION CAD/CAM software - Flat screen 21.5", 16:9 - Workpiece length measurement LASER - Milling unit 7830 - 7887 tool changer 6-position magazine pick-up - ECO vacuum system - Air conditioning unit for switch cabinet cooling - Tool changer 7874 - Angular gear 7869 Bodpfou Tid Hjx Abbjdk - Adapter for Clamex milling cutters - Tool set - 4-axis CLAMEX - Tool holder HSK-F 63 - Drilling unit XL 7885, 19 spindles - Manual control unit - Tool set - EVOLUTION for XL drilling head 7885 - new exhibition machine -

Condition: new, Year of construction: 2022, Exhibition machine Year of manufacture: 2022 Equipment and technical data: Base machine 7402 with Pin-Jet dowel insertion function Hand control device 2D barcode scanner UPS Quattro-HSK package incl. 4-position tool changer XL drilling head Double drilling spindle in Y-axis Automatic central lubrication Bodpfowt E Tvsx Abbodk Location: Hochheim Availability: approx. week 32/2022

Condition: used, Year of construction: 2009, operating hours: 2,216 h, What are Presale Items at Second Owner? Presale items are machines that we sell in their current condition ("as-is"). We have purchased these machines based solely on photos and sell them with the information provided in the advertisement. Unfortunately, we do not have additional details, such as exact dimensions or machine specifications. Additionally, these machines are often not yet in stock and have not been inspected by us. Bsdpfx Asx Aq Dpjbbjdk These machines are offered at competitive prices, which means the prices are lower than usual, but the risk lies entirely with the buyer. Please carefully review the information in the advertisement before making a purchase. If you have any questions, feel free to contact us! - Machine available from: 2026-01-19 - Year: 2009 - Documentation available: No - CE marking present: Yes - CE certificate present: No - Serial number: 26 - Operating hours: 2216 - Number of units [pcs]: 7 - └ 1st unit type: Pre-milling unit - └ 2nd unit type: Glue unit - └ 3rd unit type: Cap unit - └ 4th unit type: Rough milling unit - └ 5th unit type: Corner rounding unit - └ 6th unit type: Radius scraping unit - └ 7th unit type: Flat scraping unit Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: used, Year of construction: 2005, Used machine Year of manufacture: 2005 Condition: Guides slightly worn, only suitable for rough cutting Equipment and technical data: - Cutting length: 4300 mm - Max. passage height: 2200 mm - Max. trimming height: 2100 mm - Max. scoring height vertical: 2100 mm - Cutting depth: 80 mm - Motor: 5.5 kW - Saw blade speed: 4500 rpm - Saw blade diameter: 300 mm - Extraction: 2 x 100 mm - Compressed air consumption: 60 NL/min Dimensions: 5620 x 1480 x 2990 mm Availability: short-term Storage location: Flörsheim Bdsdswqifkopfx Abbok

Condition: excellent (used), Holz-Her power feeder, 3 rollers with stand (rollers are NEW), 8 speeds, in very good condition. Bdodpfxjwktals Abbek

Condition: used, Year of construction: 2004, Cutting length 4300 mm, cutting height 2200 mm, motor 4.0 kW, cutting depth 60 mm, saw blade diameter 250 mm. Location: Nattheim. Bdodpfx Aboxr A Nvjbjk

Condition: not inspected (used), Used machine Used vertical panel saw by Holz-Her, type 1210 Older model; suitable only for coarse cutting Technical data: Cutting length approx. 5300 mm Cutting height approx. 2200 mm Cutting depth approx. 80 mm Maximum saw blade diameter 300 mm Motor power 4 kW Bsdoxviuajpfx Abbedk Location: ex stock 54634 Bitburg - immediately available -

Condition: used, Year of construction: 2008, total length: 6,100 mm, total height: 1,800 mm, total width: 930 mm, Price: On request - Year: 2008 - Documentation available: No - CE certificate present: No - Serial number: 5014065 - Transport dimensions: 6100mm x 930mm x 1800mm (l x w x h) - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Bdjdpfx Aox Adxgjbbjk Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: used, Year of construction: 2008, Used machine Year of manufacture: 2008 Condition: Well-maintained (ready for demonstration at customer site) Equipment and technical specifications: Console machine Working size X: 3,200 mm Working size Y: 1,470 mm Max. travel height Z: 325 mm Milling unit 7939, 6 kW (S6) Including laser pointer Including traveling disc tool changer 7996 with 18 positions Including stationary tool changer on the right side Including 7893 magazine for manual tool change position 8 consoles including 12 vacuum suction cups for 4-field machining 4 pneumatically raisable and lowerable loading aids Including hand control unit Including 3-field safety tread mats Including saw unit for sawing/grooving in X Including C axis 7997 Bdjdpoxymfkefx Abbsk Horizontal drilling units: 6 Vertical drilling units: 16 Double drilling spindle in X Heat exchanger for control cabinet cooling CAMPUS software for CNC machining centers Vacuum pump 100 m³/h Weight: approx. 4,450 kg The tools shown in the tool changer are not included in the scope of delivery! Availability: by arrangement Location: Rhineland-Palatinate

Condition: used, Year of construction: 1999, Cutting width: 5300 mm Cutting height: 1910 mm Storage location: Nattheim Bedpfx Abjxzu Eusbedk

Condition: used, Year of construction: 2016, total length: 4,630 mm, total height: 1,770 mm, total width: 1,600 mm, Weight: 1.200 kg Price: On request What are Presale Items at Second Owner? Presale items are machines that we sell in their current condition ("as-is"). We have purchased these machines based solely on photos and sell them with the information provided in the advertisement. Unfortunately, we do not have additional details, such as exact dimensions or machine specifications. Additionally, these machines are often not yet in stock and have not been inspected by us. These machines are offered at competitive prices, which means the prices are lower than usual, but the risk lies entirely with the buyer. Please carefully review the information in the advertisement before making a purchase. If you have any questions, feel free to contact us! Bjdpox Adxasfx Abbedk - Machine available from: 2025-12-01 - Year: 2016 - Documentation available: No - CE marking present: Yes - CE certificate present: No - Serial number: 15507737 - Transport dimensions: 4630mm x 1600mm x 1774mm (l x w x h) - Transport weight [kg]: 1200kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: used, Year of construction: 2006, Used machine Year of manufacture: 2006 Condition: completely overhauled Features and technical data: - Equipped with new glue application system - Manually adjustable infeed guide - Milling unit 1961 - Edge feeding unit 1903 - Glue application station 1906 with sensitive nozzle - Pressure unit 1816, pneumatic - End trimming unit 1822 - Milling unit 1942 M (radius, chamfer, flush trimming) - Complete air nozzle - Scraper unit 1929 - Chip collection box - Surface scraper 1964 - Extraction hood set - Complete safety covers - Total length: 5291 mm - Workpiece thickness: min. 6 / max. 50 mm - Edging thickness depending on equipment: 0.4–5 mm - Maximum edging height: 55 mm - Edging length (strips): min. 350 mm - Edging overhang/height per side: max. 3 mm - Minimum workpiece width: 60 mm - Minimum workpiece length: 180 mm - Feed speed: 12.5 m/min Bjdpfx Abjwka H Sjbedk - Extraction: - Joint milling unit: 900 m³/h - Milling unit: 280 m³/h - Scraper unit: 280 m³/h - Static vacuum: - Joint milling unit: 1490 Pa - Milling unit: 1650 Pa - Minimum air velocity: 20 m/sec - Joint milling unit connection: 70 mm - Scraper connection: 70 mm - Compressed air: 6 bar Availability: short-term Location: Flörsheim

Condition: used, Year of construction: 1994, Edge thickness 0.3 - 20 mm, edgeband height: max. 66 mm, edgeband length: min. 200 mm, workpiece width min. 60 mm, workpiece length min. 140 mm, workpiece thickness: min. 6 mm, max. 60 mm, feed speed 8 or 16 m/min - Edgebanding with Ultra - Granupress - End trimming with 2 saws, 0 - 15° tiltable - Milling, radius / flush - Corner copying - Scraper - Pneumatic buffing Location: Nattheim Bsdpfxovvkdto Abbjdk

Condition: used, Year of construction: 2003, total height: 2,900 mm, total length: 5,100 mm, total width: 1,700 mm, Weight: 650 kg - Year: 2003 - Documentation available: No - CE certificate present: No - Serial number: 633/0-306 - Max. cutting height vertical [mm]: 2200 - Max. cutting width [mm]: 4300 - Min. saw blade diameter [mm]: 240 - Max. saw blade diameter [mm]: 250 Bdodpexbhmlofx Abbek - Arbor saw blade diameter [mm]: 30 - Horizontal cutting: Yes - Vertical cutting: Yes - Transport dimensions: 5100mm x 1700mm x 2900mm (l x w x h) - Transport weight [kg]: 650kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: used, Year of construction: 2019, Used machine Year of construction: 2019 Equipment and technical data: - Designed for classic nesting processing with wear plate - Machine frame in welded construction with ground and hardened prism guides for the gantry, unit head, and consoles - Gantry design traveling column - Helical rack and pinion drive in X and Y directions; ball screw drive in Z direction for precise positioning - Processing dimensions: - Max. support area on nesting table: X = 3100 mm Y = 1560 mm - Max. traverse paths: X = 4695 mm Y = 2100 mm Z = 293 mm - Max. clearance height over DYNESTIC table: Z = 100 mm from table top (without wear plate) - Maximum programmable speed: Vector speed: 128 m/min X = 80 m/min Y = 100 m/min Z = 25 m/min - DYNESTIC table: - Fixed, continuous processing table with grid layout - Continuous grooves in X and Y direction - Groove spacing: 50 mm - Includes 25 meters sealing cord for clamping the wear plate - Vacuum zones: single-circuit vacuum system - Drilling unit 7877: - 19 spindles - Drive power: 1.7 kW - 13 vertical spindles: - Individually selectable - U-shaped arrangement - 5+4 in X and 4 in Y direction - 32 mm grid - Max. drill diameter: 35 mm - Total drill length: 70 mm from mounting end (depends on panel thickness) - Spindle stroke: 70 mm - Rotation direction: clockwise/counter-clockwise alternately - n(max): 1000 - 4400 rpm infinitely variable - Holder: M10 thread – 11 mm fit - Without tools and holders - 6 horizontal spindles: - 2 double drilling spindles in X direction - 1 double drilling spindle in Y direction - Holder: M10 thread, 11 mm fit - Max. total drill length: 63 mm from mounting end - Without tools and holders - Milling unit 7842: - Power: 12.0 kW (S6) - n(max) = 1000 - 24000 rpm infinitely variable - Max. power at 12000 to 24000 rpm - Air-cooled - With HSK-F 63 tool holder - With right-hand threaded nut (for right-hand rotating tools) Bsdpfx Abowkbbdjbodk - With collet chuck with HSK shank - Ceramic ball bearings (hybrid bearings) - Max. tool weight: 6 kg (including holder) - Tools: milling and grinding tools max. Ø 160 mm - Safety guard according to CE standard - Safety fencing at sides and rear - Vacuum pump: 500 m³/h, dry-running - Personnel safety via light barriers in the front machine area - Handheld control unit for remote operation with the following functions: - Start/Stop machining program - Speed control for machining cycles - Reset button - Manual feed/rapid traverse for all axes - EMERGENCY STOP - CAMPUS V7 CAD/CAM software 1x machine license comprising: - CAMPUS NC-HOPS: - Graphic variant system with dialog programming and CAD/CAM functions for creating part variants with macro technique - CAMPUS MT-Manager - CAMPUS Workcenter - CAMPUS DXF interface - Automatic central lubrication - Automatic lubrication at defined intervals - Additional dust protection by overpressure in each guide carriage - Simultaneous lubrication for all linear ... (text evidently continues)

Condition: used, Year of construction: 2009, HOLZ-HER edge banding machine CONTRIGA 1366 Edge thickness: 0.4-30 mm (depending on equipment) Edge height: 51/66 mm (depending on equipment) Panel thickness: 6-45/60 mm (depending on equipment) Edge types: Rolls and strips Feed speeds: Continuous feed from 12-30 m/min (depending on equipment) With adjustable infeed level in the magazine area (max. adjustment range 30 mm) With height-adjustable magazine plate for changing the lower edge overhang With large magazine plate Ø 820 mm for edge rolls up to Ø 800 mm With transport chain including automatic central lubrication With motor-driven, position-controlled bridge height adjustment With pneumatic locking roller for the shortest workpiece sequence With extendable workpiece support (extension width 1600 mm) With space-saving, pneumatically controlled sliding hoods over the entire machine (Deviations for individual units are possible) with motorized infeed guide with injection oiler for lubricating all joints and bolts (including operating hours counter) with central connection for extraction (2x Ø 200 mm) with integrated chip collection box at the end of the machine (when radius scraper unit is installed) PPC 231 control system - Power PC for efficient setup and changeover - 15" SVGA screen with touchscreen - 128 MB CF memory card - USB connector on board - Ethernet network connection - Keyboard connector on board - Windows-like user interface - all information in plain text and/or graphics - Rotatable and pivoting control panel at eye level - Dust-proof membrane keyboard with softkeys (pushbuttons) - LED display for unit preselection - Program list with program names and numbers - Extensive program memory - Individual selection of the units with the functions as basic setting options for setpoints, route points and tool corrections as well as the fixed route points - Centralized and clear setup processes for units and their axis settings via fine adjustment (depending on the equipment) - Interval display for the shortest workpiece distance - Integrated path control - Path points are controlled generally or program-specifically - Clear and complete recording of all operating data - Service messages in plain text - Diagnostic system - including integrated synchronous bus system for high precision in unit control - Individual administration for up to ten users, including password protection - Online maintenance (optional), data exchange with HOLZ-HER Service - Barcode interface (optional) BASIC MACHINE CONTRIGA 1366 - Belt bridge Options and accessories for the basic machine Spraying device 1856 for the inlet and outlet area For the inlet area: Electronically controlled release agent sprayer with Riepe-LPZ/II release agent For the outlet area: Electronically controlled cleaning agent sprayer with Riepe-LP163/93 cleaning agent (only in conjunction with pre-milling unit 1961 and surface scraper 1964) Joint milling unit Joint milling station 1803 (2x 2.6 kW, 200 Hz, 12000 min-1) With two plunge-controlled milling units 1 unit in up-cutting direction 1 unit in down-cutting direction Plunge path 5 mm With static frequency converter 200 Hz Without milling tool With ProLock screw-in clamp for fast tool changes Tool for 1803 (workpiece height up to 60 mm) Diamond milling cutter PRO UT 2 pieces (front and rear) including protective covers Ø 100-63 - Ø 30 mm, Z = 3 + 3 + 3, 1x left-hand rotation, 1x right-hand rotation Noise-reduced milling cutter with integrated chip guide DFC technology (Leitz syst Bdjdpfxsvvkfdo Abbok

Condition: used, Year of construction: 2001, total length: 5,650 mm, total height: 1,750 mm, total width: 1,100 mm, Weight: 1.950 kg Price: On request - Year: 2001 - Documentation available: No - CE certificate present: No - Serial number: 468/0-103 - Transport dimensions: 5650mm x 1100mm x 1750mm (l x w x h) - Transport weight [kg]: 1950kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels Bjdpfx Ajxlqpdobbjdk

Condition: new, Year of construction: 2024, New machine Year of manufacture: 2024 (arrived in 2025) MACHINE SEEKER ENQUIRIES: Please understand that we do not offer this new machine outside our sales area in Germany (Rhine-Main area and North Rhine-Westphalia). These inquiries will not be answered. MACHINE SEEKER ENQUIRIES: Please understand that we do not offer this new machine outside our sales area in Germany (Rhine-Main area and North Rhine-Westphalia). These inquiries will not be answered. Technical specifications: Edge thickness for rolls: 0.4 - 3 mm (depending on material) Edge thickness for strips: 0.4 - 8 mm (depending on material) Edge cross-section: max. 6 x 42 mm Edge height: max. 65 mm Workpiece thickness: 6 - 60 mm (Restrictions may apply to individual units) Workpiece width: min. 65 mm Workpiece length: min. 160 mm (without corner rounding) Workpiece length: 180 mm Feed speed: 10 m/min Equipment: Motorized pressure bridge adjustment Extendable workpiece support XL, 600 mm spacing 3-color LED light in the infeed Motorized adjustment of the infeed guide Long infeed guide 1252 mm I-Tronic package Edge Control PPC 322 W IntelliSet: intelligent Tool correction f.a.s.t = fast setting technology ECO mode Energy saving mode Prepared for RETURN connection (third-party manufacturer) BS 501 guide system; right-angled workpiece feeding for front edge banding of narrow parts - Workpiece thickness: min. 10 mm - Workpiece thickness: min. 60 mm - Workpiece length: approx. 140 - 450 mm FG201 jointing unit with 2 64 mm high milling heads MG 301 edge feeder GluJet GJ 725 NC PUR PRO adhesive application system - Automatic glue height adjustment via dosing sleeve and sensing nozzle to compensate for panel tolerances - NC axis for height adjustment - 90° pivoting for easy cleaning of the Glue Jet nozzle - Includes vacuum pump for professional processing of PUR adhesives. The vacuum pump removes the reactant (water molecules) from the PUR, allowing the PUR adhesive to remain in the system without curing. The vacuum pump operates independently of the machine's power supply and automatically compensates for any vacuum loss. - PUR fully under control! DW 301 printing unit with motorized NC axis; 1st roller driven by pneumatic plunge control, 2 conical pressure rollers GM301 spray unit after printing unit with lubricant for high-gloss edges KA 501 pneumatic trimming unit (60 mm) Extraction hoods for trimming unit Bdjdsxymd Topfx Abbjk FR301 MOT6 multifunctional trimming unit Shelf program FF 301 MOT1 profile trimming unit ZK301 MOT4 scraper unit including high-gloss package FK702 surface scraper Complete spray unit for separating and cleaning agent GM 301 spray unit after printing unit (high-gloss edges) SW 501 buffing unit Piping above the machine is not included in the scope of delivery. Availability: Short-term Storage location: Hochheim

Condition: used, Storage location: Nattheim Bdsdpovvkrdofx Abbsk

Condition: used, Year of construction: 1995, Used machine Year of manufacture: 1995 Equipment and technical data: Cutting length 5300 mm Cutting height 2200 mm Max. workpiece thickness 80 mm Motor 5.5 kW Compressed air connection 6 bar, 50 NL/min Extraction connection 2 x 100 mm, 1200 m³/h Pneumatic unit lock Pneumatic immersion of the unit Digital horizontal display Availability: by arrangement Bjdpsxymd Hsfx Abbjdk Location: Hochheim

Condition: used, Year of construction: 2011, Weight: approx. 4500 kg Bdsdpfsvvi R Eex Abbsk Storage location: Nattheim

Condition: used, Year of construction: 2019, Used machine Year of manufacture: 2019 Equipment and Technical Data: - For classic nesting processing with wear plate - Machine frame of welded construction with ground and hardened prism guides for the gantry, unit head, and consoles - Gantry-type traveling column - Helical rack and pinion drive in X and Y axes, ball screw in Z axis for precise positioning - Working dimensions: - Max. support area on nesting table: X = 3100 mm, Y = 1560 mm - Max. traverse paths: X = 4695 mm, Y = 2100 mm, Z = 293 mm - Max. clearance height over DYNESTIC table: Z = 100 mm from table top (without wear plate) - Maximum programmable speed Vector speed: 128 m/min X = 80 m/min, Y = 100 m/min, Z = 25 m/min - DYNESTIC table: - Fixed, continuous processing table with grid layout - Continuous grooves in X and Y directions - Groove spacing: 50 mm - Includes 25 meters of sealing cord for clamping the wear plate - Vacuum fields: Single-circuit vacuum system - Drilling unit 7877: - 19 spindles - Drive power: 1.7 kW - 13 vertical spindles: - Individually selectable - Arranged in U-shape - 5+4 in X direction, 4 in Y direction - 32 mm spacing - Max. drill diameter: 35 mm - Total drill length: 70 mm from screw-on end (depending on panel thickness) - Spindle stroke: 70 mm - Rotational direction: alternating clockwise/counterclockwise - Speed (max): 1000 - 4400 rpm, infinitely variable - Tool holder: M10 thread, 11 mm fit - Without tool, without holder - 6 horizontal spindles: - 2 double drill spindles in X direction - 1 double drill spindle in Y direction - Tool holder: M10 thread, 11 mm fit - Max. total drill length: 63 mm from screw-on end - Without tool, without holder - Milling unit 7842: - Power: 12.0 kW (S6) - Max. speed = 1000 - 24,000 rpm, infinitely variable - Max. power at 12,000 to 24,000 rpm - Air-cooled Bdedpfxjwka Upo Abbek - With HSK-F 63 tool holder - With right-hand threaded nut (for right-hand rotating tools) - With collet chuck for HSK shank - Ceramic ball bearings (hybrid bearings) - Tool weight max. 6 kg (incl. holder) - Tools: milling and grinding tools max. Ø 160 mm - Safety enclosure according to CE standard - Side and rear safety fence - Vacuum pump: 500 m³/h, dry-running - Personnel safety ensured by light barriers in the front machine area - Hand-held control device for remote operation of the machine with the following functions: - Start/stop of the processing program - Control of processing cycle speed - Reset button - Manual feed/rapid traverse for all axes - EMERGENCY STOP - CAMPUS V7 CAD/CAM software 1x machine license consisting of: - CAMPUS NC-HOPS: - Graphic variant system with WOP and CAD/CAM features for creating part variants using macro technology - CAMPUS MT-Manager - CAMPUS Workcenter - CAMPUS DXF interface - Automatic central lubrication - Automatic lubrication at defined intervals - Additional sealing against dust via pressurization in each guide carriage

Condition: used, Year of construction: 2006, EVA glueing, 2 pressure rollers, cross-cutting station, pre-milling cutter and rounding cutter, surface scraper, transport device Storage location: Nattheim Bjdpfsvvkg Iox Abbodk