Used Cnc 360 for sale (13,409)

Condition: new, 2000 mm Working width 400 mm Wheel width 400 mm Prjdpfx Ajwz Ruheg Djd height adjustment 750 - 1100 mm weight of the machine ca. 0,80 t dimensions 2,0 x 0,55 x 1,0 m

Condition: new, Year of construction: 2024, functionality: fully functional, overall weight: 143 kg, fuel type: diesel, tank capacity: 12 l, color: black, output current: 12 A, output voltage: 400 V, output frequency: 50 Hz, nominal power: 6.8 kW (9.25 HP), continuous power: 6.2 kW (8.43 HP), total length: 730 mm, total width: 500 mm, total height: 620 mm, rotational speed (max.): 3,000 rpm, type of cooling: air, Diesel generator set with a power output of 6.8kW. The Proton 360 is characterized by Dual Power technology thanks to which the user is able to obtain 80% power on a single-phase socket and 100% power on a three-phase socket. SHORT: Genset type: DUAL, Single-phase, Three-phase Fuel type: Diesel Air-cooled: Yes Voltage: 230/400V Rated power: 400V - 6200 watts (7.7kVA) Maximum power up to 15 minutes - 6800W (8.5kVA) Rated power 230V - 4960 watts Maximum power up to 15 minutes - 5440 watts WEIGHT: Gross weight: 143 kg FUELING: 1.0 liters per hour (at 70% of maximum power) 1.2 liters per hour (at 90% of maximum power) Predpfx Aotq Upisg Dsd TECHNICAL DATA: Prepared for operation - Yes Type - Portable Year of manufacture - 2024 Condition of the unit - Factory new Manufacturer - Proton Warranty - 24 months Efficiency cos Φ - 0.8 ENGINE: Engine model - Proton 188FA-D Fuel type - Diesel (Diesel) Engine type - High-pressure, 4-stroke Number of cylinders - 1 Direct injection - Yes Type of cooling - Air Displacement - 456 cc3 (88x75) Number of revolutions per minute (RPM) - 3000 Permissible maximum operating time (1 cycle) - 8 hours Cooling time (after 1 cycle) - 60 minutes Oil pressure and level sensor - Yes Type of valve train - Gear-driven valve train Engine speed controller - Mechanical Lubrication method - Forced, engine with oil pump Starter - 800W Oil sump capacity - 1.6l Recommended oil - TITAN CARGO MC 10W40 (semi-synthetic for diesel). Valve type - Electromagnetic, controlled by a single solenoid GENERATOR: Generator model - Proton 180-CAVR-D Rated current (400V) - 12.3 A Voltage - 230/400V Frequency - 50 Hz Construction of the alternator - Synchronous Degree of protection (of the alternator) - IP 23 CABINET: Housing type - Unbuilt - Open. Ability to exhaust fumes outside the facility - Yes Sound pressure level LPA - 84dB (measurement - 5m, open space) Fuel tank capacity - 12 liters Operating time on a full tank (Average) - 8 hours SOCKETS: Number of three-phase outlets - 1 piece (16A 5-pin) Number of single-phase sockets - 1 piece (32A), 1 piece (8A) Number of other sockets - 1 piece (12V) DIMENSIONS: Diameter of wheels - 22 cm Width - 50 cm Length - 73 cm Height - 62 cm FEATURES: DualPower™ technology - Yes Automatic start (ATS) - Yes - adapted Voltage stabilizer (AVR) - Yes - built-in Remote control - Yes (up to 90m outdoors) Starting type - Electric Glow plugs - Yes Fuel level indicator - Yes Voltmeter - Yes Ammeter - Yes Current protection - 3xC16 (for 400V), 1xC32 (for 230V) Hour meter - Yes Battery - 36 Ah Transport kit: Yes - Large wheels Yes - Handles RICH EQUIPMENT See below what else the kit includes: - Battery - Air, oil, fuel filter - Keys for ongoing maintenance - Plugs Why our company? We are a company specializing exclusively in generators, for more than 17 years we have been in this business constantly striving to make our products represent the highest quality and most reliable. We have a wide range of generators from 6 to 300kW on a variety of engines including English Ricardo, American Cummins or German Deutz and in various configurations made specifically for customer requirements.

Condition: good (used), Tool trolley with inserts Psdpfxexn Tv Ss Ag Djrd with turning holder for NC lathe, Shaft: 50 mm

Condition: used, Year of construction: 2016, functionality: fully functional, machine/vehicle number: MY65D69004, number of ink cartridges: 6, number of print heads: 6, resolution (max.): 1,200 dpi, paper width (min.): 400 mm, paper width (max.): 1,600 mm, total length: 260 mm, total width: 75 mm, total height: 140 mm, year of last overhaul: 2023, type of input current: DC, input current: 16 A, input voltage: 220 V, overall weight: 250 kg, working range: 1,600 mm, HP360 inkjet printer for use as an add-on or standalone printer. It still works perfectly and is in reasonable condition. Ideal for printing banners, vinyl, posters, etc. Comes with ink, cartridges, a maintenance kit, and print heads. Prsdpfx Ajxqy Igjg Ded

Condition: used, Year of construction: 1990, x-travel 0500 mm Podpfou Rt Nxsx Ag Dord y-travel 400 mm z-travel 400 mm table-size 680 x 380 mm CNC control 432 PHILIPS feed range 1-3000 mm/min rapid traverse 6 m/min Tool bore ISO 40 turning speed range 20 - 3150 U/min main drive DC 5 kW milling head -swivable +/- 90 ° total power requirement 12 kW weight of the machine ca. 1,2 to dimensions of the machine ca. 2,5 x 2 x 2 m CNC milling machine with 432 Control.

Condition: used, Year of construction: 1998, functionality: fully functional, travel distance X-axis: 4,000 mm, travel distance Y-axis: 1,400 mm, travel distance Z-axis: 1,000 mm, rapid traverse X-axis: 10 m/min, rapid traverse Y-axis: 10 m/min, rapid traverse Z-axis: 15 m/min, feed rate X-axis: 5 m/min, feed rate Y-axis: 5 m/min, feed rate Z-axis: 5 m/min, torque: 1,200 Nm, controller manufacturer: SIEMENS SINUMERIK 840D, workpiece weight (max.): 18,000 kg, total height: 4,950 mm, total length: 10,270 mm, total width: 5,640 mm, table width: 1,000 mm, table height: 800 mm, table length: 6,000 mm, table load: 18,000 kg, rotational speed (min.): 16 rpm, rotational speed (max.): 3,200 rpm, overall weight: 21,000 kg, spindle speed (max.): 3,200 rpm, spindle motor power: 22,000 W, type of input current: three-phase, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, FFQ 100W-A6(A8) CNC – TOS KUŘIM Machining Center, Table Length 6m (8m) Control System: Siemens 840 C Availability: According to selected refurbishment Prjdpfx Ajxp Iz Sog Dsd Warranty: According to selected refurbishment Can be supplied as used, after medium repair, or after general overhaul, including modernization. FFQ 100W-A6(A8) CNC – Technical Specifications: Basic Machine Data: Manufacturer: TOS Kuřim Overall Length: 10,270 mm Overall Width: 5,640 mm Overall Height: 4,950 mm Total Weight: 21,000 kg Total Connected Load: 40 kVA Working Range: Longitudinal Travel X-axis: 4,000 mm (6,000 mm) Cross Travel Z-axis: 1,000 mm Vertical Travel Y-axis: 1,400 mm Horizontal Spindle Head with Extendable Quill: Tool Taper per ČSN 22 0433 ISO 50 Max. Power: 22 kW Speed Range: 16 – 3,200 rpm Number of Speed Steps: Infinitely variable Max. Torque: 1,200 Nm Quill Diameter: 170 mm Quill Extension: 400 mm Quill Working Feed Range: 1 - 2,000 mm/min Quill Rapid Traverse: 4,000 mm/min Max. Quill Feed Force: 10,000 N Spindle Head (IPS head): Tool Taper per ČSN 22 0433 ISO 50 Max. Power: 22 kW Speed Range: 16 – 3,200 rpm Number of Speed Steps: Infinitely variable Max. Torque: 1,200 Nm Machining H-V, spindle automatically adjustable to vertical or horizontal position Feed Range X – Y / Z: Number of Steps / Range: Infinitely variable / 1 – 5,000 mm/min Rapid Traverse Y – Z / X: 10,000 / 15,000 mm/min Table: Table Area: 1,000 x 6,000 mm (8,000 mm) Max. Load: 3,000 kg/m2 Tool Magazine: Number of Positions: 40 pcs Control System: SIEMENS 840 C Details upon request.

Condition: new, 3000 mm Working width 360 mm Wheel width 360 mm Pjdjfv Attepfx Ag Derd roll diameter 60 mm 900 kg height adjustment 650 - 1100 mm weight of the machine ca. 0,050 t dimensions 3,1 x 0,45 x 0,6 m

Condition: good (used), Heavy-duty transport rollers, machine rollers, transport trolleys, heavy-duty trolleys, tank rollers, machine transport rollers steering gear -Machine transport rollers: armored rollers 2 pieces -Load capacity: t -Support height: 100 mm -Rollers: Ø 83 x 98 mm "Methacrylate" Psdpfx Aswxu T Aog Djrd -Shipping/Price: complete -Dimensions each: 360/185/H100 mm -Weight: 12.9 kg/piece

Condition: ready for operation (used), Year of construction: 1999, functionality: fully functional, machine/vehicle number: 1325.0458-14, controller manufacturer: Siemens, input frequency: 50 Hz, input current: 190 A, TECHNICAL DETAILS Electrical Operating voltage: 400 V Prsdpfx Agewx Hktj Djd Phases: 3 AC Frequency: 50 Hz Fusing: 250 A Rated current: 190 A EQUIPMENT Lathe with 4 tools, suitable only for 3-cylinder crankshaft

Condition: used, Year of construction: 1986, functionality: limited functionality, machine/vehicle number: 275564, travel distance X-axis: 1,600 mm, travel distance Y-axis: 1,400 mm, travel distance Z-axis: 1,200 mm, feed rate X-axis: 10 m/min, feed rate Y-axis: 10 m/min, controller manufacturer: Heidenhain, controller model: TNC426, table width: 1,200 mm, table length: 1,600 mm, spindle speed (max.): 3,000 rpm, spindle motor power: 45,000 W, number of slots in tool magazine: 60, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, Oerlikon - Präzisons - Horizontal boring and milling machine Model: Sirius MCP-60/HM4.CNC Control: Heidenhain TNC426 Rotatability: 360° Door size: 2000x1700mm (hxw) Work tables Number of pallets: 2 Pallet dimensions: 1600x1200mm; 1200x1200mm Pallet and tool changer Tool system Tool holder: SK-50 Electronic handwheel Documents Electrical Mechanical Spare parts catalog Tool changer and pallet changer must be repaired, as well as the mechanical brake of the Y-axis. Podpfxsvcb Sno Ag Djrd The machine is connected and can be inspected and tested by appointment.

Condition: used, Year of construction: 1980, spindle diameter 105 mm Pedpfx Agsu Rt Inj Dsrd cross travel of table 1600 mm vertical adjustment of drilling slide 1600 mm longitudinal movement of column 1000 mm spindle stroke - max. 600 mm spindle taper ISO SK 50 spindle turning speed range 6,3- 1600 U/min table surface area 1120 x 1120 mm spindle motor 45 kW voltage 400 V feeds x/y/z -stepless 0 - 5000 mm/min rapid travel x/y/z 10 m/min table load 6 t table rotation 360 ° total power requirement 82 kW weight of the machine ca. 18 t dimensions of the machine ca. 4,8 x 4,9 x 4,2 m Machine was complete reconditioned and retrofitted with Siemens 840 D control in 2008 for a price of 400.000,- Euro ! Machine has a 40 position ATC, 5 CNC axes with ball screw drives (X,Y,Z,W,B), housing around machine with safety doors, cooling arrangement built in 2020 and new spindle drive Siemens built in 2008.

Condition: used, functionality: fully functional, machine/vehicle number: HR14935, Year of construction: 2025, load capacity: 6,000 kg, lifting height: 25,900 mm, fuel type: diesel, mast type: telescopic, construction height: 3,100 mm, power: 115 kW (156.36 HP), fork carriage width: 1,030 mm, fork length: 1,200 mm, empty load weight: 18,000 kg, total length: 8,080 mm, drive type: Diesel, construction width: 2,500 mm, Rotatable telescopic forklift Chassis number: HR14935 ISO class: ISO class 4 = 5,000 - 10,000 kg Mast type: Telescopic Gearbox: Hydrostatic with Speedshift Condition: New device Technical condition: New Front tires type: Solid rubber Front tires size: AEOLUS TLAGP23 44565 R22.5 Front tires condition: New Predpfovrl Urex Ag Ded Rear tires type: Solid rubber Rear tires size: AEOLUS TLAGP23 44565 R22.5 Rear tires condition: New Description: 12 months warranty / max. 2000 operating hours Rear work lights, front work lights, heating, STVZO, full cabin, air conditioning, CE certificate, interior mirror, exterior mirror, joystick, seat, Battery 2x12V 180AH 1200A wheel chocks TÜV preparation 20 km/h

Condition: new, 2000 mm Prsdpfx Ajupxuieg Dod Working width 360 mm Wheel width 360 mm roll diameter 60 mm 800 kg height adjustment 650 - 950 mm weight of the machine ca. 0,045 t dimensions 2,07 x 0,48 x 0,21 m Simple roller conveyor with 2000mm length.

Condition: used, Tailstock for lathe, counter bearing for dividing head, dividing head Prjdpfxed Riw Hs Ag Ded -from: Schaublin 102 -Collet holder: type W25 -Drawing: with the photos -Dimensions: 450/360/H170 mm -Weight: 11kg

Condition: used, Mitteltrennschnitt Einrichtung / Centre Cut for Double Production Müller Martini 360 Prodpfx Agowryppj Dod Baujahr / Year 2007 - Serial-No. For Müller Martini Saddle Stitcher Type 360 - 4/5th trimmer knife attachment Mitteltrennschnitt Einrichtung für Müller Martini Sammelhefter Type 360 Online-Video-Inspection by WhatsApp - MS Zoom - Telegram On Stock Emskirchen/Nürnberg - Available Immediately - Can be test

Condition: used, Year of construction: 1990, x-travel 0500 mm Psdeu Rt Nrspfx Ag Dsrd y-travel 400 mm z-travel 400 mm table-size 680 x 380 mm CNC control 432 PHILIPS feed range 1-3000 mm/min rapid traverse 6 m/min Tool bore ISO 40 turning speed range 20 - 3150 U/min main drive DC 5 kW milling head -swivable +/- 90 ° total power requirement 12 kW weight of the machine ca. 1,2 to dimensions of the machine ca. 2,5 x 2 x 2 m CNC milling machine with 432 Control.

Condition: used, functionality: fully functional, machine/vehicle number: MRT3060, Year of construction: 2025, load capacity: 6,000 kg, lifting height: 29,900 mm, fuel type: diesel, mast type: telescopic, construction height: 3,100 mm, power: 127 kW (172.67 HP), fork carriage width: 1,320 mm, fork length: 1,200 mm, empty load weight: 21,800 kg, total length: 7,940 mm, drive type: Diesel, construction width: 2,500 mm, Telescopic forklift, rotatable Chassis number: MRT3060 Fork width: 100 mm Fork thickness: 60 mm ISO class: ISO class 4 = 5,000 - 10,000 kg Mast type: Telescopic Gearbox: Hydrostatic Predjvt Higepfx Ag Dod Condition: New device Technical condition: New Front tires type: Solid rubber Front tires size: AEOLUS TLAGP23 44565 R22.5 Front tires condition: New Rear tires type: Solid rubber Rear tires size: AEOLUS TLAGP23 44565 R22.5 Rear tires condition: New Description: 12 months manufacturer's warranty / Max. 2000 operating hours Rear work lights, front work lights, heating, STVZO, full cabin, air conditioning, CE certificate, interior mirror, exterior mirror, joystick, windshield wiper, LED, seat, Procedure of Machine by radio control Wheel chocks TÜV preparation 20 KMH road approval with TFF Germany

Condition: new, 300 mm 300 mm 300 x 260 mm saw band length 3920 x 34 x 1,1 mm table height 780 mm band speed 20 - 100 m/min total power requirement 3,7 kW weight of the machine ca. 1,65 t dimensions 2,0 x 2,05 x 1,7 m PROMOTIONAL PRICE!!!! 2-column high-performance automatic band saws from the SBS series Podpfofb Nbfjx Ag Dsrd The SBS series impresses with its sophisticated technology, high quality and longevity and unrivaled, sophisticated standard equipment. • Modern SNC 20 control for CNC version • Frequency-controlled saw drive • Control buttons with pictograms • Work light • Powered chip brush • Hydraulic belt tension • Clamping pressure regulation • Double vice (before and after the belt) • Creep path for positioning • Bundle tension prepared electrically and hydraulically • Chip conveyor The SNC 20 control allows you to enter up to 20 different sawing tasks (length and number of pieces) conveniently and easily. When the target dimension is entered, the control automatically calculates the saw waste and the number of feeds. Additionally, the error code display system provides quick analysis for troubleshooting.

Condition: good (used), Clamping table, clamping angle, T-slot table, rotary table, milling machine table -Clamping angle for workpiece clamping -Dimensions: W380/H355/L360 mm -Surface: milled Pedpfeb A I Igjx Ag Djrd -Weight: 50 kg

Condition: new, 460 mm 460 mm 460 x 460 mm saw band length 5450 x 41 x 1,3 mm table height 800 mm band speed 20 - 100 m/min total power requirement 5,5 kW weight of the machine ca. 3,2 t dimensions 2,675x 2,15 x 2,05 m PROMOTIONAL PRICE!!!! 2-column high-performance automatic band saws from the SBS series The SBS series impresses with its sophisticated technology, high quality and longevity and unrivaled, sophisticated standard equipment. • Modern SNC 20 control for CNC version • Frequency-controlled saw drive • Control buttons with pictograms • Work light Prodpfxefg E Hve Ag Dsd • Powered chip brush • Hydraulic belt tension • Clamping pressure regulation • Double vice (before and after the belt) • Creep path for positioning • Bundle tension prepared electrically and hydraulically • Chip conveyor The SNC 20 control allows you to enter up to 20 different sawing tasks (length and number of pieces) conveniently and easily. When the target dimension is entered, the control automatically calculates the saw waste and the number of feeds. Additionally, the error code display system provides quick analysis for troubleshooting.

Condition: good (used), manual trolley, push trolley, crane trolley, trolley undercarriage, crane undercarriage, crane undercarriage, trolley, carrier undercarriage, overhead track undercarriage Prsdpevyy Upjfx Ag Ded -Manufacturer: Steel, crane chassis without drive -Carrier width: changeable, set to max. 130 mm -Load capacity: kg -Dimensions: see photos -Dimensions: 405/360/H350 mm -Own weight: 43 kg

Condition: new, 330 mm 330 mm 400x330 mm saw band length 4570 x 34 x 1,1 mm table height 800 mm band speed 20 - 100 m/min total power requirement 3,7 kW weight of the machine ca. 2,35 t dimensions 2,23 x 2,15 x 1,8 m PROMOTIONAL PRICE!!!! 2-column high-performance automatic band saws from the SBS series The SBS series impresses with its sophisticated technology, high quality and longevity and unrivaled, sophisticated standard equipment. • Modern SNC 20 control for CNC version • Frequency-controlled saw drive • Control buttons with pictograms • Work light • Powered chip brush • Hydraulic belt tension • Clamping pressure regulation • Double vice (before and after the belt) • Creep path for positioning Pjdpfefb Nbgsx Ag Dsrd • Bundle tension prepared electrically and hydraulically • Chip conveyor The SNC 20 control allows you to enter up to 20 different sawing tasks (length and number of pieces) conveniently and easily. When the target dimension is entered, the control automatically calculates the saw waste and the number of feeds. Additionally, the error code display system provides quick analysis for troubleshooting.

Condition: good (used), Industrial Robot, Robot, Robotics, Servo Motor, Electric Motor, DC Motor, Stepper Motor, Stepper Motor, Stepping Motor -Manufacturer: Berger Lahr, robotics robot cross table Prodpfxsi I Hdce Ag Djd -Servo motors: SER397/4L3SS0TO 3 pieces -Linear units: LM-A504KT100-250 / LM-H404K-700-LW230 / LM-P404KT100-1200 -Individual components: see photos -Traverse paths: x=670 / Y=360 / z= 1260 mm -Total dimensions: 1405/590/H1650 mm -Weight: 74kg

Condition: new, 550 mm 550 mm 550 x 550 mm saw band length 5980 x 41 x 1,3 mm table height 800 mm band speed 20 - 100 m/min total power requirement 5,5 kW weight of the machine ca. 3,8 t dimensions 3,0 x 2,15 x 2,2 m PROMOTIONAL PRICE!!!! 2-column high-performance automatic band saws from the SBS series The SBS series impresses with its sophisticated technology, high quality and longevity and unrivaled, sophisticated standard equipment. • Modern SNC 20 control for CNC version • Frequency-controlled saw drive • Control buttons with pictograms • Work light • Powered chip brush • Hydraulic belt tension • Clamping pressure regulation • Double vice (before and after the belt) • Creep path for positioning • Bundle tension prepared electrically and hydraulically • Chip conveyor The SNC 20 control allows you to enter up to 20 different sawing tasks (length and number of pieces) conveniently and easily. When the target dimension is Prjdpfxsfg E Hwo Ag Dsd entered, the control automatically calculates the saw waste and the number of feeds. Additionally, the error code display system provides quick analysis for troubleshooting.

Condition: new, 300 mm 300 mm 300 x 260 mm saw band length 3920 x 34 x 1,1 mm table height 780 mm band speed 20 - 100 m/min total power requirement 3,7 kW weight of the machine ca. 1,65 t dimensions 2,0 x 2,05 x 1,7 m Unused display machine!!!! 2-column high-performance automatic band saw from the SBS series • Modern SNC 20 control system for CNC models • Frequency-controlled saw drive • Work light • Powered chip brush • Hydraulic band tensioning • Clamping pressure adjustment • Double vise (before and after the band) • Creep speed for positioning Prodpfx Asxfwbtog Ded • Bundle tensioning, electrically and hydraulically prepared • Chip conveyor The SNC 20 control system allows for convenient and uncomplicated input of up to 20 different sawing tasks (length and quantity). When the target dimension is entered, the control system automatically calculates the saw waste and the number of feeds. In addition, the error code display system provides quick analysis for troubleshooting. Including band path detection (1800 EUR)