The servo CNC milling machine T-Rex Servo-1325 with helical racks and HWIN / THK / PMI linear slide has a solid steel frame. The portal milling machine enjoys great popularity with its robust construction, high stability and extensive basic equipment.
**Machine including CNC control, CADCAM software, control software, control panel, manual central lubrication, multi-zone vacuum table**.
traverse area 2500x1300x200 mm
clamping area 2530x1320 mm
passage height Z max. 220 mm (optional 320/420 mm...
Long Foam Cutting Tools EPS Foam Milling Router Bits Ball End and Flat End
Model: Ball End and Flat End Long flute foam cutting router bits
These long series foam end mill and ball nose router bits are widely used with robot milling machine and huge CNC router which used to cut molds from EPS foam, polyurethane foam, eva foam, plastic, etc. The long foam cutting tools are great for extended reach machining, deep foam cutting, cnc sculpting big items, cnc routing foam. They are helpful mills for...
With the T-Rex N-0609 portal milling machines you buy mature technology and long-proven technology combined in one portal machine
Machine with CNC control, CADCAM software, control software, control panel, manual central lubrication, multi-zone vacuum table.
Iteunet
Due to the robust steel frame construction, vibrations can be damped during the machining process. Thus, the machined workpiece gets clean cutting edges and surfaces.
The CNC portal milling machine with helical racks and HWIN / TH...
Specifications / Technical Data S-1000
CNC-Router and CNC-Engraver
This is the biggest machine of our High-Z cnc-router series. With external dimensions of approx. 1350x800mm it is still very handy.
With the High-Z 3D-cnc-routers you purchase an allround talent in TÜV-certified quality. If you want to clampand fix complex workpieces on the worksurface, or, or, or clamp work-pieces in a high bench vise (the cnc-machine sits on a frame-construction, is driven by 2 motors and therefore allows to ...
Important and distinguishing design features of the RaptorX SL steel base machine RaptorX-SL3200/S15
cnc-step.com/milling-machine/
The application range of the RaptorX- SL CNC milling machine is extremely wide due to the adjustable work surface height (variable bridge clearance: 150mm, 300mm or 400mm) plus the travel range of the Z axis of 300mm (at no extra cost).
The Z axis stability is excellent, allowing you to work as accurately on large 3D objects as one can on flat sheet materials.
Us...
Important and distinguishing design features of the RaptorX SL steel base machine / gantry
RaptorX-SL1200/S20
The application range of the RaptorX- SL CNC milling machine is extremely wide due to the adjustable work surface height (variable bridge clearance: 150mm, 300mm or 400mm) plus the travel range of the Z axis of 300mm (at no extra cost).
The Z axis stability is excellent, allowing you to work as accurately on large 3D objects as one can on flat sheet materials.
Use the system a...
Important and distinguishing design features of the RaptorX SL steel base machine
The application range of the RaptorX- SL CNC milling machine is extremely wide due to the adjustable work surface height (variable bridge clearance: 150mm, 300mm or 400mm) plus the travel range of the Z axis of 300mm (at no extra cost).
The Z axis stability is excellent, allowing you to work as accurately on large 3D objects as one can on flat sheet materials.
A CE compliant commissioning of our CNC machines ...
Important and distinguishing design features of the RaptorX SL steel base machine
RaptorX-SL2200/S20
The application range of the RaptorX- SL CNC milling machine is extremely wide due to the adjustable work surface height (variable bridge clearance: 150mm, 300mm or 400mm) plus the travel range of the Z axis of 300mm (at no extra cost).
The Z axis stability is excellent, allowing you to work as accurately on large 3D objects as one can on flat sheet materials.
A CE compliant commissioning...
Why manufacture small parts on large, expensive CNC machining centers when it does a small CNC machine for a fraction of the price as fast and true to size ?
A CE compliant commissioning of our CNC machines requires the assembly of the safety enclosure and the suction adapter.
Vgv9a7cnn
Brass, copper , steel, stainless steel and many other materials can be processed .
See information and seek non-binding offer or view a demonstration at our premises , personalized with your material and your r...
Important and distinguishing design features of the RaptorX SL steel base machine
A CE compliant commissioning of our CNC machines requires the assembly of the safety enclosure and the suction adapter.
The application range of the RaptorX- SL CNC milling machine is extremely wide due to the adjustable work surface height (variable bridge clearance: 150mm, 300mm or 400mm) plus the travel range of the Z axis of 300mm (at no extra cost).
The Z axis stability is excellent, allowing you to wor...
The application range of the RaptorX- SL CNC milling machine is extremely wide due to the adjustable work surface height (variable bridge clearance: 150mm, 300mm or 400mm) plus the travel range of the Z axis of 300mm (at no extra cost).
3D engraving, bas reliefs in marble etc. Create and mill, what ever you want .....
The Z axis stability is excellent, allowing you to work as accurately on large 3D objects as one can on flat sheet materials.
A CE compliant commissioning of the CNC machine req...
The application range of the RaptorX- SL CNC milling machine is extremely wide due to the adjustable work surface height (variable bridge clearance: 150mm, 300mm or 400mm) plus the travel range of the Z axis of 300mm (at no extra cost).
The Z axis stability is excellent, allowing you to work as accurately on large 3D objects as one can on flat sheet materials.
A CE compliant commissioning of the CNC machine requires the assembly of the safety enclosure and the suction adapter.
Use the sys...
Important and distinguishing design features of the RaptorX SL CNC Router steel base machine
RaptorX-SL2200/S15
The application range of the RaptorX- SL CNC milling machine is extremely wide due to the adjustable work surface height (variable bridge clearance: 150mm, 300mm or 400mm) plus the travel range of the Z axis of 300mm (at no extra cost).
The Z axis stability is excellent, allowing you to work as accurately on large 3D objects as one can on flat sheet materials.
Use the syst...
Important and distinguishing design features of the RaptorX SL steel base gantry machine
RaptorX-SL1200/S15
The application range of the RaptorX- SL CNC milling machine is extremely wide due to the adjustable work surface height (variable bridge clearance: 150mm, 300mm or 400mm) plus the travel range of the Z axis of 300mm (at no extra cost).
The Z axis stability is excellent, allowing you to work as accurately on large 3D objects as one can on flat sheet materials.
Use the system as a plasm...
Specifications / Technical Data S-1000
CNC-Router and CNC-Engraver
This is the biggest machine of our High-Z cnc-router series. With external dimensions of approx. 1350x800mm it is still very handy.
With the High-Z 3D-cnc-routers you purchase an allround talent. If you want to clampand fix complex workpieces on the worksurface, or, or, or clamp work-pieces in a high bench vise (the cnc-machine sits on a frame-construction, is driven by 2 motors and therefore allows to be positioned above a p...
Specifications / Technical Data S-720
CNC-Router / CNC-Engraver / Milling machine
With the High-Z cnc router and engraving machine you purchase an allround talent. If you want to clampand fix complex workpieces on the worksurface, or, or, or clamp work-pieces in a high bench vise (the cnc milling machine sits on a frame-construction, is driven by 2 motors and therefore allows to be positioned above a piece to be processed).
Or if you simply want to do engraving- or drillingjobs…..you can work...
Specifications / Technical Data S-400
CNC Router / CNC milling machine / Engraver
cnc-step.com/cnc-router/
With the High-Z CNC-router / engraver you purchase an allround talent. If you want to clampand fix complex workpieces on the worksurface, or, or, or clamp work-pieces in a high bench vise (the cnc milling machine sits on a frame-construction, is driven by 2 motors and therefore allows to be positioned above a piece to be processed).
Or if you simply want to do engraving- or drillingjobs…...
Specifications / Technical Data S-400
CNC Router / CNC milling machine / Engraver
cnc-step.com/cnc-router/
With the High-Z CNC-router / engraver you purchase an allround talent (optional WIN PCNC Economy, USB or professional). If you want to clampand fix complex workpieces on the worksurface, or, or, or clamp work-pieces in a high bench vise (the cnc milling machine sits on a frame-construction, is driven by 2 motors and therefore allows to be positioned above a piece to be processed).
Or if ...
Specifications / Technical Data S-720/T
CNC-Engraving-Machine / Milling machine / CNC-Router
With the purchase of the T-variation of High-Z CNC-router you get a proven technology with a certain icing of the cake in german TÜV-certified quality. High-Z/T 3D-cnc-engraver was conceived for once more precision (repetition precision approx. 0,02mm) and especially for higher traverse speed.
Because of the used ball screws the High-Z/T cnc milling machines achieves a fantastic precision and an almos...
Specifications / Technical Data S-720/T
CNC-Engraving-Machine / Milling machine / CNC-Router
With the purchase of the T-variation of High-Z CNC-router you get a proven technology. High-Z/T 3D-cnc-engraver was conceived for once more precision (repetition precision approx. 0,02mm) and especially for higher traverse speed.
Because of the used ball screws the High-Z/T cnc milling machines achieves a fantastic precision and an almost unmeasurable back lash of approx. 0,01mm. At the same time ther...
Specifications / Technical Data S-1000/T
CNC-Router / CNC-Engraver
With the purchase of the T-variation of High-Z CNC-router you get a proven technology. High-Z/T was conceived for once more precision (repetition precision approx. 0,02mm) and especially for higher traverse speed.
Because of the used ball screws the High-Z/T CNC-engraver achieves a fantastic precision and an almost unmeasurable back lash of approx. 0,01mm. At the same time there are high traverse speeds up to approx. 108mm / se...
Specifications / Technical Data S-1400/T
CNC-Router and CNC-Engraver / Engraving Machine
(Attention: Pictures are showing the type with trapezium spindles, thats the only different to the t-series )
With the purchase of the T-variation of High-Z CNC-router you get a proven technology. High-Z/T cnc-routers are conceived for once more precision (repetition precision approx. 0,02mm) and especially for higher traverse speed.
Because of the used ball screws the High-Z/T cnc-machines achieves a f...
PRATIX S22-31 B - CNC machining centre
The working area is 3086 x 2155 x 150mm
C.E. safety norms
Volt 400 EU
Frequency 50 Hz
Upgrade to "TECPAD" remote control
250/300 m³/h 50/60 Hz vacuum pump
Additional vacuum pump, 250/300 m³/h 50/60 Hz
9,5kW - 13Hp electrospindle
Air blowers on the electrospindle
Tool holder with higher capacity
HSK 63 right tool-holder for expansible collets (ER32)
Left rear stops for "A" field
Retractable stops for E and H fields managed by NC
Detecting system for tool le...
C.N.C. WORKING CENTER with 4 axes (X-Y-Z-C) for routering, boring, cutting and edge banding
Numerical Control IMATRONIC NT 213
Safety cabin (enclosure) of the working head. Front emergency carpets
No. 2 Working tables (with pods and rails), each one with No. 4 Support rails (total 8)
O7ywf
Each Table dimensions (mm) 1400 x 2400. No. 2 Working areas
LED system on the rails for the vacuum pods positioning (Y-axe) and on the basement for rails (X-axe)
Automatic Tools Changing System. Tools storage...
5 axis CNC ROUTER QUINTAX model Q5H
CNC FAGOR 8070 - New in 2009
Table size 3050 x 3800 mm
. = two tables 3050 x 1900 mm attached together - or not
Longitudinal travel X : 3700 mm
Cross travel Y : 4000 mm
Vertical travel Z : 1550 mm
Electrospindle Colombo HSK.63 / 22.000 RPM
C axis ( head rotation) 360° (continuous)
A axis ( left-right tilting) +/- 120° (continuous)
Very good status, only lightly used in aerospace factory
Gcy2kbn
Very well maintained CNC Router Working area 2920x950x65 Drill block with 10 vertical 4 drill horizontal 1 groove cutter 4 times pickup changer
Fhhxbilpm
Code: 0217
Brand: MASTERWOOD
Model: CN 3 T F
CNC chisel mortiser with router for the execution of shutters of any type, uprights of frames in general, milling of panels, Stanley hinges, balconies, doors, etc..
Technical data:
Max workpiece size mm 150 x 110 x 2800
Working head with quick setting device of tool stroke
Bnvvt7wx8h
Max slot depth mm 130
Vertical head stroke mm 140
Longitudinal speed mt/min 30
Main motor Hp 3
High-frequency drilling-routing unit (T.F.) with controlled axis - Pow...
LEPUS II L
CNC router for aluminium machining 7 m, 3 axes
APPLICATION:
For aluminium machining, cutting and milling.
FUNCTIONS:
- Excellent machining quality and strong, accurate vacuum cleaner
- Tool changing magazine for 4 independent, cooled spindles
- Possibility to process wooden and plastic boards by changing the cutter
- Ideal air duct vacuuming on a polyethylene plate
- Tool change in 2.5 seconds
- Vacuuming in independent sections
- Automatic pick length reset
- External vacuuming syst...
Through feed CMS Router attached original specification available by request. Machine is working so available to view by prior arrangement.
Bjdjxc9xrv
4 axis machine with automatic pod positioning designed for producing doors.
13 kw water cooled vertical head at 18,000 RPM with 12 tool changer carousel.
4.4 kw horizontal head at 18,000 RPM with index positioning through 360 degrees for machining locks, hinges, concealed closers in all 4 edges of the door.
Pneumatic through feed table that drop...
C.N.C. WORKING CENTER with 4 axes (X-Y-Z-C) for routering, boring, cutting and edge banding
Numerical Control IMATRONIC 231 (IMAWOP)
Max useful working area (without edge banding process) mm 5000 x 1630 x 100
Max useful working area (edge banding process) mm 3900 x 1450 x 60 (panel thickness)
No. 8 movable rails (supports) length mm 1200
LED displaying both the axe X and axe Y position
Vacuum cups (with No. 1 vacuum pump, capacity 140 m3/h)
Safety side metal grids and front emergency carpets
G...
Biesse rover 30 s2, compled
Cjh0isei
We supply vacuum tables in 11 different sizes from 220 x 320 mm up to 1000 x 1500 mm.
Befa7m9gla
With this vacuum system, thin and unstable flat materials can be clamped very well and with high time savings in processing.
This model TS-2232 has the dimensions 220x320x35mm.
If you need another size please feel free to contact us, so that our support team can advise you.
Technical Specifications
• Space-saving fixed table - moving gantry design for small machine footprint
• Single structure welded, stress relieved and machined all-steel base frame, gantry and gantry feet
• Steel structures are reinforced with heavy ribs to resist flex and dampen vibrations
• Each machine design is efficiently optimized and validated by using Finite Element Analysis (FEA) to ensure quality, performance, and safety
• Open machine bed for easy loading and unloading by forklift or o...
LEPUS II
CNC-controlled machine for aluminium processing, after the cutter change also for wood and plastics.
APPLICATION:
For aluminium processing, cutting and opening of V-type channels.
Possibility to process wooden and plastic panels by changing cutters.
MAIN FEATURES:
- Plate fixing system
- High quality machining with strong chip extraction
- Tool changer magazine: capacity of 4 independent cooled engines
- Ideal vacuuming with air ducts on a polyethylene plate
- 2D CAD CAM and optimizatio...
Machine with router and 2 Pcs. Drillheads Angular - Toolchanger. Panels 800 x 2800 mm.
Ft0sqc2
C.N.C. WORKING CENTER 4 axes (X-Y-Z-C)
Goose-neck type, with Numerical Control ICOS-Open. Software IMAWOP
Working table with pods and rails. No. 6 Supports (rails) of lenght mm 1450
Automatic deplacement by CNC (X axis) of the Supports/rails
Automatic deplacement by CNC (Y axis) of the vacuum pods/cups
Automatic Tools Changing System. Tools storage plate (No. 18 folds- positions)
Max. useful working area (X - Y - Z) mm 5300 x 1450 x 100
Min. workpieces dimensions (X - Y - Z) mm 325 x 115 x 14
Ma...
CNC Router MECANUMERIC PRO 3015
Fabrication date 11/2005
Dimensions X-3050 x Y-1500 x Z-150 mm
Spindle 4,5kw
Bp7ayucfxg
Vacuum table
Price excludes shipping (we do not offer shipping, pickup by client)
Technical Specifications
• Space-saving fixed table - moving gantry design for small machine footprint
• Single structure welded, stress relieved and machined all-steel base frame, gantry and gantry feet
• Steel structures are reinforced with heavy ribs to resist flex and dampen vibrations
• Each machine design is efficiently optimized and validated by using Finite Element Analysis (FEA) to ensure quality, performance, and safety
• Open machine bed for easy loading and unloading by forklift or o...
LEPUS X - plotter and machining centre in one
CNC router for aluminium machining 4m, 3 axes
APPLICATION:
It is used for cutting, machining and milling aluminium and composite panels.
FUNCTIONS:
- Types / classes of recyclable materials: Aluminium board, Aluminium composite board, Laminated composite, Wood composite, various plastic boards, Industrial or semi-industrial aluminium boards
- Automatic storage for 8 tools
- Vacuuming in independent sections
- Intelligent CAM post processing
- Automat...
3 AXIS MACHINE WITH NEW CONTROL UNIT
CAMBAM CNC SOFTWARE (CAD-CAM) WINDOWS 10
VACUUM TABLE 900 X 1300 MM
24000 RPM - MK2
Pt2ydu
SPACE 2500 X 2800 MM
TOOLS AND MAGAZINES INCLUDED
C.N.C. WORKING CENTER with 4 axes (X-Y-Z-C) for routering, boring, cutting and edge banding
Goose-neck machine - Front emergency carpets - Working table with pods and rails
Numerical Control Type ICOS CNC (open 231) - Software IMAWOP
Safety cabin (enclosure) of the working head
No. 8 Rails-supports (mm 1400 long)
LED system (on the rails) for the vacuum pods positioning - LED in Y + X
Automatic Tools Changing System (Store with No. 18 folds-positions)
Useful working area (X - Y - Z) mm 6100 x 20...
Machine was bought in early 2019. and have been working for 7 months only. Located in Riga, Latvia.
Please contact for more details.
Cnc router ELE CNC1530ATC-4A
- 9.6kw HSD ATC air cooling spindle, 24000RPM (made in Italy)
# T-slot & Vacuum working table with six zones
#1500*3000*400mm effective working area
# 11kw Delta inverter
# Tool changer - Carousel design 8 positions
# Taiwan TBI ball screw for Z axis
# Helical rack gear for X,Y axis
# Gantry moving
#850w YASKAWA servo motors and 100...
Materia CL is a range of versatile, compact,
5-axis processing center designed to meet a
wide variety of high-speed machining needs in
relation to the milling of advanced and compound
materials and special or stratified resins
for mould models, the machining of thermoformed
elements, unusually shaped three-dimensional
elements, and components for the
aeronautical sector, boats and the car industry.
Bm03e7vyjb
Description: CNC Router
Manufacturer: SCM
Model Type: PRATIX S 22-43 B
Manufacture Date: 2014
Numerically controlled production center
Btsby2acrl
Equipment S/N: AH/117627
Asset No: CH00049
Location: Changshu City, China
CNC Tool Clips HSK63F Toolholder Forks for Tool Changer Replacement
•Model: HSK 63F tool clips
•Material: Dupont plastic POM
•Biesse Item No.: 1705A0123
•Brand: RicoCNC
•Fits all HSK63F toolholders
•CNC tool clips worldwide for sale
CNC tool clips also are named toolholder forks, tool holder gripper, tool forks, plastic tool holder, tool holder cradle, tool holder fingers, tool holder claw, tool Holder clamp, they are all means the holder clip for auto tool changer tool station.
As there are ...
TOOLCHANGER
3 PCS EDGEBANDINGS
Npk7f
TABLE SIZE 1300 X 4900 MM - DOUBLE WORKSTATION
MUCH TOOLS WITH MACHINE
C.N.C. WORKING CENTER with 4 axes (X-Y-Z-C) for routering, boring, cutting and edge banding
Goose-neck machine - Front emergency carpets
Safety cabin (enclosure) of the working head
Numerical Control Type ICOS CNC - Software IMAWOP
Working table with pods and rails (No. 8 rails)
LED system (on the rails) for the vacuum pods positioning
Automatic Tools Changing System (Store with No. 18 positions)
Useful working area (X - Y - Z) mm 5100 X 2000 X 125
Useful working area (X -Y - Z) in edge banding ...
WINTER ROUTERMAX PRO
Ypufs
Working area 1300 mm x 2500 mm
Spindle HSD 6 kW
9 x vertical drilling units
4 x horizontal drilling units
2 x saw
Vacuum pump (5 kW)
Servo drives YASKAWA
Central lubrication
Technische Daten: - Arbeitsbereich X - Achse 2100 mm
- Arbeitsbereich Y - Achse 5000 mm
- Arbeitsbereich Z - Achse 300 mm
- Frässpindel luftgekühlt 6.0 kw, ER 32
- Spindel Drehzahl stufenlos 18.000 rpm
- Verfahrsystem (X & Y Achse) Zahnstangen-Ritzelantrieb
- Verfahrsystem (Z Achse) Kugelrollspindel
Nuztp
- Verfahrmotoren AC Servo Motoren Leadshine 850 W
- SHIMPO Getriebe Antrieb
- max. Verfahrgeschwindigkeit 45 m/min
- max. Arbeitsgeschwindigkeit 20 m/min
- Arbeitsgenauigkeit 0.05 mm
- Vakuum -...
This may be of interest to you
Machineseeker becomes biggest sponsor of the 2nd Bundesliga in Germany
Photo gallery: The World's 10 biggest excavators
10 valuable tricks for buying used machines online
Sample sales contract for used machines in nine languages
Morlock Motors official partner of Machineseeker and Truckscout24
Photo gallery: the 10 strongest forklift trucks in the world
