Used Gear Chamfering Machine for sale (70,438)

Condition: excellent (used), Year of construction: 2013, functionality: fully functional, rotary table diameter: 450 mm, position of the milling head: Schwenkbar (45°), table diameter: 450 mm, total length: 5,600 mm, gear diameter: 500 mm, total height: 3,100 mm, total width: 3,600 mm, input frequency: 50 Hz, type of input current: three-phase, spindle speed (max.): 340 rpm, table bore: 125 mm, spindle speed (min.): 80 rpm, travel distance X-axis: 325 mm, travel distance Y-axis: 200 mm, travel distance Z-axis: 400 mm, overall weight: 14,800 kg, distance table to spindle center: 350 mm, tool diameter: 200 mm, controller manufacturer: Siemens Sinumerik 840D sl, drive type: Sinamics S120, control type: CNC control, Equipment: documentation/manual, rotational speed infinitely variable, A Pfauter PE 500 for the economical production of straight and helical spur gears up to module 12 and 500 mm in diameter – completely overhauled by SerWeMa with Siemens Sinumerik 840D sl, equipped with a gripper unit and a 32-position workpiece storage for unmanned operation. The machine is ready for operation in our hall in Chemnitz: you can inspect it under power, and if desired, we will mill your own sample part and you can take delivery of the machine here. No delivery time, no risk. Sold by Serwema Retrofit Solutions, the company that carried out the overhaul and knows the machine inside out. The general overhaul included complete geometric overhaul by grinding and scraping, new roller bearings in the main drive and in the milling head, measuring and reconditioning the worm gear, overhauled or new ball screw drives, overhaul of hydraulics, lubrication and coolant system, and new electrical equipment with Sinumerik 840D sl, Sinamics S120 and new axis motors. An electronic generating gear controls all generating and single-part machining processes, and an NC-controlled crash recovery protects the tool and workpiece in the event of a power or phase failure. New paint in RAL 7035/5015 with oil and coolant resistant two-component paint, acceptance of geometry according to SerWeMa protocol based on DIN ISO 6545. The machine controls six CNC axes: X radial, Y tangential, Z axial, A milling head swivel, B milling cutter drive and C table drive. The SerWeMa gear cutting software guides you through workpiece and tool data via masks, without the need for programming: up to three position-oriented gearings per workpiece, each with its own tool, up to three cuts per gearing with simultaneous or counter-rotating movement, form corrections for convex, conical and convex-conical profiles, lead-in and lead-out phase correction, chamfer milling, dimension correction via tooth width, two-roll or two-ball gauge, measuring stop, shift strategy with defect management per generating cutter and cutting force monitoring with automatic retraction. Technologies: generating milling, single-part milling and worm gear milling both radially and tangentially. A hand-held device with a handwheel allows setup directly in the working area. Nwodpfx Akez Et E Eeion Technical data: max. workpiece Ø 500 mm, max. module 12, max. milling cutter Ø 200 mm, max. milling cutter length 240 mm, shift travel 200 mm, milling cutter speed 100–450 rpm, swivel angle +25°/−45°, travel radial 325 mm (axis distance 25–350 mm), travel axial 400 mm (310–710 mm), table diameter 450 mm, table bore 125 mm, connection power approx. 60 kVA. Installation dimensions incl. automation approx. 7.2 × 4.5 × 3.3 m, weight approx. 16.8 t. Equipment: machine enclosure, chip conveyor, gripper unit with two grippers, workpiece storage with 32 positions, preparation for emission extraction (150 mm nozzle, Harting connector on the machine roof). Documentation complete in German: operating manual, electrical diagrams with parts lists, hydraulic and lubrication diagrams. Serwema optionally offers: trial part milling in our factory, additional milling arbors, assembly and commissioning at your location, operator training and a control system upgrade to Sinumerik ONE. Spare parts and service come from a single source, worldwide, even after the purchase.

Condition: used, Technical details: Nwjdpfx Aeya Rhkskijn max. wheel diameter: 600 mm max. module: 6 weight of the machine ca.: 0,9 t dimensions of the machine ca.: 1,52 x 0,91 x 1,45 m

Condition: used, total height: 2,000 mm, total width: 1,300 mm, total length: 5,900 mm, Year of manufacture: 1990 Colour: Green Empty weight: 7.500 kg Center-height: 250mm Table-length: 2300mm Travel grinding-spindel: 200mm Gear diameter: 300 mm Nedpfx Aozy E Taokiewn Module range: 0.5 mm – 8 mm Helix angle: ±35° Max. workpiece weight: 100 kg - Year: 1990 - Documentation available: No - CE certificate present: No - Serial number: 018.0402 - Drive system: CNC - Control system brand: Optronic - Control system type: CNC D140 - Horizontal/vertical: Horizontal - Model: Gear hobbing machine - Min. module [mm]: 0.5 - Max. module [mm]: 8 - Max. workpiece width [mm]: 2300 - Max. workpiece height [mm]: 500 - Max. workpiece weight [kg]: 100 - Table length [mm]: 2300 - Transport dimensions: 5900mm x 1300mm x 2000mm (l x w x h) - Transport weight [kg]: 7500kg - Transport packages [pcs.]: 5 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: refurbished (used), Year of construction: 2027, functionality: fully functional, rotary table diameter: 590 mm, position of the milling head: Schwenkbar (50°), table diameter: 590 mm, total length: 5,100 mm, gear diameter: 750 mm, total height: 3,240 mm, total width: 4,000 mm, input frequency: 50 Hz, type of input current: three-phase, milling length: 250 mm, spindle speed (max.): 360 rpm, spindle speed (min.): 36 rpm, travel distance X-axis: 450 mm, travel distance Y-axis: 200 mm, travel distance Z-axis: 600 mm, overall weight: 12,000 kg, rotational speed (max.): 360 rpm, rotational speed (min.): 18 rpm, distance table to spindle center: 500 mm, tool diameter: 215 mm, controller manufacturer: Siemens Sinumerik ONE, drive type: Sinamics S120, control type: CNC control, Equipment: documentation/manual, rotational speed infinitely variable, The Liebherr LC 752 is one of the most widely produced hobbing machines in its class: rigid bed, robust milling head, and proven performance in the gear, drive, and supplier industries for spur and helical gears and shafts up to 750 mm in diameter. Serwema Retrofit Solutions, Chemnitz, completely overhauls the machine and delivers it with Siemens Sinumerik ONE, the latest generation of control system with full availability of spare parts and support. Proven Liebherr kinematics, new electrical system, new drives, new safety technology: you get the performance of a new machine at a fraction of the price, with an eight-month delivery time, and acceptance testing is carried out in Chemnitz together with you. Nwedpfoz Et N Rjx Akijn The machine mills spur and helical gears as well as shafts up to module 10, and in a reinforced version up to module 14. With an axis travel of 600 mm between the milling head axis and the table surface, even long pinion shafts can be securely clamped. The milling head swivels by ±50°, the milling head speed ranges from 36 to 360 rpm, the table rotates at up to 18 rpm for small numbers of teeth, and the tangential travel of 200 mm utilizes the full milling head length for long tool life. Technical data: max. workpiece diameter 750 mm, table diameter 590 mm, distance between milling head axis and table axis 50–500 mm, distance between milling head axis and table surface 175–775 mm, max. module 10/14, max. milling head diameter 215 mm, max. milling head length 250 mm, tangential travel 200 mm, milling head speed 36–360 rpm, max. table speed 18 rpm, swivel angle ±50°. Installation dimensions approx. 5.1 × 4.0 × 3.24 m, weight approx. 12 t. The machine is delivered with a new Siemens Sinumerik ONE control system and Sinamics S120 drives in a climate-controlled control cabinet manufactured in-house. The user-friendly interface makes setup and programming possible without in-depth G-code knowledge. Geometric acceptance is carried out according to the manufacturer's standard or DIN, with a protocol. The scope of delivery also includes the complete machine enclosure with safety technology according to the latest standards, a new coat of paint in RAL 5015/7035, a magnetic chip conveyor, circulating and loss lubrication, a hydraulic unit, a coolant system, and the operating manual.

Condition: repair required (used), Year of construction: 1987, functionality: unexamined, Max. diameter with counter support: 1450 mm Max. diameter without counter support: 2100 mm Nwsdpfoz Df A Tsx Akisn Diameter of the clamping table: 1800 mm Total weight: 38 tons The clamping table has been disassembled and overhauled.

Condition: excellent (used), Year of construction: 1994, functionality: fully functional, wheel width: 540 mm, total length: 3,250 mm, total height: 2,350 mm, total width: 2,650 mm, type of input current: AC, workpiece weight (max.): 250 kg, helix angle: 45 °, input voltage: 220 V, workpiece length between centers: 1,000 mm, workpiece weight between centers: 250 g, workpiece diameter between centers: 630 mm, workpiece diameter (max.): 630 mm, year of last overhaul: 2025, overall weight: 2,500 kg, Technical specifications: – Workpiece diameter min / max. 5 mm / 630 mm – Distance between centers min / max 15–1050 mm, – Measurable tooth width: 540 mm, – Module min / max 0.5–20 – Installation dimensions: Length × Width × Height 3250 mm × 2650 mm × 2360 mm – Maximum installation area: 8.4 m² – Machine weight: net 2500 kg Control system: Zeiss ST 57 Required power supply: 220 volts, 50 Hz, compressed air: 8 bar Machine accessories: – Basic machine with probe holder – Höfler measuring sensor with Zeiss probe holder – Calibration sphere – Complete set of workpiece carriers Nsdj Afqd Ejpfx Akiewn – Auxiliary table – Probe assortment: Various measuring probes for different modules – Computer with monitor and printer – Operating manual in English Software: Basic equipment – Software module for testing spur and helical gears, evaluating K profiles, pitch, concentricity, axis position program – Selectable software language – Evaluation according to DIN/ISO/AGMA/customer-specific tolerances

Condition: good (used), Year of construction: 1957, functionality: fully functional, total length: 3,000 mm, total height: 2,600 mm, total width: 2,500 mm, overall weight: 6,000 kg, cutting height (max.): 400 mm, Gear hobbing machine, manufacturer: LIEBHERR, type: L 300, year of manufacture: 1958, max. workpiece diameter: approx. 300 mm, spindle: MK4, net price €16,000 (negotiable) Nwjdpfx Aj Aapgzokijn

Condition: used, Year of construction: 2000, functionality: fully functional, pointing milling machine für Stangen carbide turnover plates 4 Stück working area Rund, Profil+vierkant mm working range 80 (100) an 25 mm milling drive 380/420V, 18,5 KW, 50 Hz kW revolutions per minute Fräsantrieb: 1465 U/min . clamping devices hydraulic pneumatic hydraulisch infeed device hydraulisch ca. 5 lfdm x 300 mm hydraulic power unit Rexroth tank 250 l coolant tank mit Spänekasten l switchgear cabinet mit Klimaanlage control SIEMENS S 7-300 Njdpfeg Akgtox Akijwn +++++ Please note: The machine is dismantled and ready for loading. It is not possible to show it under power or make a video. Our offer includes already the best pictures. So we don’t have and won’t send additional pictures. +++++

Condition: refurbished (used), Year of construction: 2009, functionality: fully functional, rotary table diameter: 900 mm, position of the milling head: Schwenkbar (35°), table diameter: 900 mm, total length: 6,000 mm, gear diameter: 1,200 mm, total height: 3,500 mm, total width: 3,900 mm, input frequency: 50 Hz, type of input current: three-phase, spindle speed (max.): 360 rpm, spindle speed (min.): 36 rpm, travel distance X-axis: 725 mm, travel distance Y-axis: 320 mm, travel distance Z-axis: 1,000 mm, overall weight: 24,000 kg, distance table to spindle center: 780 mm, tool diameter: 280 mm, controller manufacturer: LH90, control type: CNC control, Equipment: documentation/manual, rotational speed infinitely variable, A young Liebherr LC 1203 from the current LC generation: manufactured in 2009, with a motor milling spindle, capable of processing workpieces up to 1200 mm in diameter and weighing 9.5 tons, module 20 – the machine for large gears in gearbox manufacturing, wind power, mining, and heavy machinery construction. Serwema Retrofit Solutions, Chemnitz, optionally upgrades the machine to Siemens Sinumerik ONE, the latest control generation with full spare parts and support availability, and delivers it with a new, air-conditioned control cabinet manufactured in-house and a user-friendly interface. The mechanics remain in the well-maintained original condition with the original paint – a Liebherr from 2009 does not need a general overhaul, but a control system that will last for the next 20 years. Delivery time is six months from order. The machine mills spur and helical gears, as well as shafts up to module 20, in a reinforced version up to module 24, starting from a tooth count of 1 – including worm gears and special profiles. With 1000 mm of axial travel between the milling spindle axis and the table surface, long pinion shafts are securely clamped, and the 900 mm table supports 95 kN. The motor milling spindle rotates from 36 to 360 rpm, the milling head swivels by ±35°, and the tangential travel of 320 mm utilizes the full milling cutter length of 340 mm for long service life. Technical data: max. workpiece diameter 1200 mm, max. workpiece weight approx. 9.5 tons (table load 95 kN), table diameter 900 mm, distance between milling spindle axis and table axis 55–780 mm, distance between milling spindle axis and table surface 200–1200 mm, max. module 20/24, min. number of teeth 1, max. milling cutter diameter 280 mm, max. milling cutter length 340 mm, tangential travel 320 mm, milling cutter speed 36–360 rpm, max. table speed 12 rpm, swivel angle ±35°. Installation dimensions approx. 6.0 × 3.9 × 3.5 m, weight approx. 24 tons. Scope of delivery: optionally, a new Siemens Sinumerik ONE control system with Sinamics S120 drives, air-conditioned control cabinet manufactured in-house, user-friendly interface with Serwema gear cutting software, machine enclosure, magnetic chip conveyor, circulating and loss lubrication, hydraulic unit, coolant system, operating manual. Original color scheme. Acceptance in Chemnitz together with you; a mechanical overhaul or geometry inspection according to DIN is offered additionally upon request. Nwjdpoz E Hx Sefx Akien

Condition: refurbished (used), Year of construction: 2027, functionality: fully functional, position of the milling head: Schwenkbar (55°), table diameter: 170 mm, total length: 3,200 mm, gear diameter: 250 mm, total height: 3,000 mm, total width: 2,600 mm, input frequency: 50 Hz, type of input current: three-phase, spindle speed (max.): 600 rpm, spindle speed (min.): 75 rpm, travel distance X-axis: 190 mm, travel distance Y-axis: 240 mm, travel distance Z-axis: 700 mm, overall weight: 12,000 kg, distance table to spindle center: 230 mm, tool diameter: 175 mm, controller manufacturer: Siemens Sinumerik ONE, drive type: Sinamics S120, control type: CNC control, Equipment: documentation/manual, rotational speed infinitely variable, The WF 250 is the classic machine for gear cutting in the gearbox, drive, and supplier sectors: compact, rigid, and quickly retoolable. Serwema Retrofit Solutions, Chemnitz, completely overhauls the machine and delivers it with Siemens Sinumerik ONE, the latest generation of control systems, ensuring full availability of spare parts and support. Proven Hurth module kinematics, new electrical systems, new drives, new safety technology: you get the performance of a new machine at a fraction of the price – inspected in Chemnitz, together with you. The machine mills spur and helical gears, as well as shafts, up to a module of 6 and a workpiece diameter of 250 mm. With an extended stand and counter-stand, long shafts and pinion shafts with a distance of up to 900 mm between the cutter axis and the table surface can be securely clamped. The milling head pivots by ±55°, the cutter speed ranges from 75 to 600 rpm, and the tangential travel of 240 mm utilizes the full cutter length for long service life. Technical data: max. workpiece diameter 250 mm, table diameter 170 mm, distance between cutter axis and table axis 40–230 mm, distance between cutter axis and table surface 200–900 mm, max. module 6, max. cutter diameter 175 mm, max. cutter length 300 mm, tangential travel 240 mm, cutter speed 75–600 rpm, swivel angle ±55°, total connection value 40 kVA. Installation dimensions approx. 3.2 × 2.6 × 3.0 m, weight approx. 12 t. The machine is delivered with a new Siemens Sinumerik ONE control system and Sinamics S120 drives in a climate-controlled control cabinet of our own manufacture. The user-friendly interface enables easy setup and programming without in-depth G-code knowledge. Geometry acceptance is carried out according to manufacturer standards or DIN with a protocol. The scope of delivery also includes the complete machine enclosure with state-of-the-art safety technology, an extended stand and counter-stand, a new paint job in RAL 5015/7035, a magnetic chip conveyor, circulation and loss lubrication, a hydraulic unit, a coolant system, and the operating manual. Nsdoz Et A Repfx Akiswn

Condition: refurbished (used), Year of construction: 2027, functionality: fully functional, position of the milling head: Schwenkbar (45°), table diameter: 4,000 mm, total length: 13,300 mm, gear diameter: 5,000 mm, total height: 5,700 mm, total width: 7,500 mm, input frequency: 50 Hz, workpiece diameter (max.): 5,000 mm, type of input current: three-phase, milling length: 600 mm, spindle speed (max.): 125 rpm, spindle speed (min.): 10 rpm, travel distance X-axis: 2,750 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 1,750 mm, overall weight: 115,000 kg, distance table to spindle center: 3,300 mm, controller manufacturer: Siemens Sinumerik ONE, drive type: Sinamics S120, control type: CNC control, Equipment: documentation/manual, The ZFWZ 5000 originates from Modul's Chemnitz gear machining division and is completely overhauled and delivered with a Siemens Sinumerik ONE control system by Serwema Retrofit Solutions, the company that houses the Modul drawing archive. Proven kinematics, new electrical system, new drives, new safety technology: you get the performance of a new machine at a fraction of the price and with a delivery time of twelve months. The machine mills external gears, both straight-toothed and helical, up to a module of 40 in hobbing and up to a module of 50 in single-indexing. With the internal milling attachment, internal gears are produced for gear rings of large roller bearings, rotary couplings, and planetary hollow gears, as used in wind power, mining, crane, and shipbuilding technology. Workpieces up to 5000 mm in diameter can be accommodated on the 4000 mm table, the milling head pivots by ±45°, and the 82 kW drive power at the milling head allows for roughing with high chip volume as well as finishing with precision. Nwodpsz Etmpjfx Akijn Technical data: max. workpiece diameter 5000 mm, table diameter 4000 mm, distance from milling spindle axis to table axis 300–1800 mm, distance from milling spindle axis to table surface 550–3300 mm, max. milling cutter diameter 500 mm, max. milling cutter length 600 mm, tangential travel 600 mm, milling cutter speed 10–125 rpm, drive power of milling head 82 kW, swivel angle ±45°. Installation dimensions approx. 13.3 × 7.5 × 5.7 m, weight approx. 115 t. The machine is delivered with a new Siemens Sinumerik ONE control system and Sinamics S120 drives, the latest Siemens generation with full availability of spare parts and support, in an air-conditioned switch cabinet of our own manufacture. The user-friendly interface makes setup and programming possible without in-depth G-code knowledge. The geometry acceptance is carried out according to the manufacturer's standard or DIN, with a protocol, jointly with you in Chemnitz. The scope of delivery also includes a machine safety fence with state-of-the-art safety technology, a new paint finish in RAL 5015/7035, a magnetic chip conveyor, circulation and loss lubrication, a hydraulic unit, a coolant system, and the operating manual.

Condition: refurbished (used), Year of construction: 2027, functionality: fully functional, wheel width: 200 mm, stroke length: 230 mm, feed length X-axis: 500 mm, type of input current: three-phase, total height: 2,900 mm, table load: 2,750 kg, table diameter: 1,005 mm, overall weight: 12,000 kg, input frequency: 50 Hz, total width: 3,300 mm, total length: 3,800 mm, distance table to spindle center: 640 mm, gear diameter: 1,000 mm, distance table center to spindle nose: 640 mm, workpiece diameter (max.): 1,000 mm, controller manufacturer: Siemens Sinumerik ONE, drive type: Siemens Sinamics S120, control type: CNC control, stroke rate (min.): 15 1/min, stroke rate (max.): 510 1/min, The universal machine for gearings that cannot be milled: The Lorenz LS 1000 CNC machines internal and external toothed spur gears up to 1000 mm in diameter – hollow gears for planetary gearboxes, gear rings, couplings, gears with a flange or chamfer. Completely modernized with Siemens Sinumerik ONE, new electrical system, hydraulics and lubrication, designed for maximum performance and accuracy in flexible manufacturing. Acceptance according to DIN and manufacturer's standards with a protocol. Offered by Serwema Retrofit Solutions, Chemnitz. Nsdpfx Akjz E H Rnsiown The LS 1000 was developed as a universal machine for construction machinery, wind turbine and machine tool gearboxes, mining technology, aerospace and textile machines, and is suitable for both single parts, small series and large series. The main application is the hobbing of straight-toothed and – with a helical guide and matching cutting wheel – helical-toothed spur gears with internal or external teeth. With software options, the machine can also process non-circular gears, grooves and cams; with special cutters, couplings as well as involute and spur gears are produced. The Sinumerik ONE with electronic gear unit guides the user through workpiece and tool data using masks, without the need for programming.

Condition: refurbished (used), Year of construction: 2027, functionality: fully functional, rotary table diameter: 1,200 mm, position of the milling head: Schwenkbar (45°), table diameter: 1,200 mm, total length: 5,250 mm, gear diameter: 1,250 mm, total height: 4,420 mm, total width: 4,700 mm, input frequency: 50 Hz, type of input current: three-phase, spindle speed (max.): 160 rpm, spindle speed (min.): 20 rpm, travel distance X-axis: 700 mm, travel distance Y-axis: 250 mm, travel distance Z-axis: 1,000 mm, overall weight: 22,000 kg, distance table to spindle center: 780 mm, tool diameter: 260 mm, controller manufacturer: Siemens Sinumerik ONE, drive type: Sinamics S120, control type: CNC control, Equipment: documentation/manual, rotational speed infinitely variable, A ZFWZ 10 module for large gears up to 1250 mm in diameter and module 22, which was completely overhauled in 2009 by SerWeMa and converted to a Siemens Sinumerik ONE with six CNC axes. The machine is in operational condition in our hall in Chemnitz: you can inspect it while it is running, we can mill your own sample part on request, and you can pick it up from us. No delivery time, no risk. Sold by Serwema Retrofit Solutions, the company that carried out the overhaul, owns the module drawing archive, and knows the machine inside and out. Nsdpfx Aez E Hy Askijwn The ZFWZ 10 is the classic Chemnitz gear hobbing machine for gearbox construction, crane and conveyor technology, mining, and heavy machinery construction: heavy cast iron bed, 1200 mm table, milling head with ±45° swivel range. It mills spur and helical gears up to module 16 in hobbing and up to module 22 in single indexing. With 1000 mm of axial travel between the cutter axis and the table surface, long shafts and large workpieces can be securely clamped. The Sinumerik ONE controls all six axes with an electronic gear train; the SerWeMa gear software guides you through workpiece and tool data via masks, without requiring programming. Technical data: max. workpiece diameter 800/1250 mm, table diameter 1200 mm, distance between cutter axis and table axis 80–780 mm, distance between cutter axis and table surface 350–1350 mm, max. module 16/22, max. cutter diameter 260 mm, max. cutter length 350 mm, tangential travel 250 mm, cutter speed 20–160 rpm, swivel angle ±45°. Installation dimensions approx. 5.25 × 4.7 × 4.42 m, weight approx. 22 t. Equipment: Siemens Sinumerik ONE control with six CNC axes, machine enclosure, magnetic chip conveyor, central and loss lubrication, hydraulic unit, coolant system, operating manual. We offer the conversion to Siemens Sinumerik ONE with Sinamics S120 and a new control cabinet, either before delivery or later at your plant – then with a guarantee on the new electrical equipment. Also optional: sample part milling in our plant, geometry acceptance according to DIN, installation and commissioning at your site, operator training. Spare parts and service are provided from a single source, worldwide, even after the purchase.

Condition: used, For sale: Professional pipe beveling/chamfering machine by FEIN with GF (Georg Fischer) RA4 head, mounted on a solid workshop stand for pipe processing. This device is used for beveling pipe ends prior to welding—preparing a V-type weld edge. Industrial equipment used in pipeline workshops, industrial installations, and when constructing process plant systems. The machine is of very robust construction, made in Germany. Comfortable operation thanks to a stable stand. Technical data • Drive manufacturer: FEIN – Made in Germany • Model: 680 CB1641 • Power: 1600 W • Voltage: 200–240 V • Frequency: 50–60 Hz • Current: 8.8 A • Speed: 150–270 rpm Head Nodpfx Aksz Slqpsiswn • Manufacturer: Georg Fischer (GF) • Type: RA4 Applications • Pipe beveling • Pipe preparation for welding • Pipeline work • Welding workshops • Industrial installations Visual and technical condition as shown in the photos. Solid industrial-grade machine.

Condition: excellent (used), Year of construction: 1972, functionality: fully functional, For sale: this gear hobbing machine. It is connected and can be tested. Comes with numerous accessories. Technical specifications: Max. gear diameter: 7100 mm Gear width: 1500 mm Max. module: 45 Table diameter: 4000 mm Hob diameter x width: 400 x 500 mm Max. helix angle: 45 degrees Cutter diameter: 500 mm Cutter speed: 9–63 rpm Total power consumption: 47 hp Machine weight: 160,000 kg Nsdpfjxwlthox Akiown The machine has hydraulic workpiece balancing. A video of the machine can be sent via WhatsApp.

Condition: ready for operation (used), Year of construction: 2015, A high-performance planetary gear production line EMAG including automation and peripheral equipment is available. 1) Raw parts storage (stacker) EMAG. 2) Vertical single-spindle turning center EMAG VLC100, max. workpiece diameter: 100mm, max. workpiece height: 150mm, max. chuck diameter: 160mm, max. swing diameter: 210mm, travel X/Z: 650mm/375mm, speed: 6000rpm, rapid traverse X/Z: 60m/min/30m/min, tool stations: 12, tool holder: VDI30, control: Siemens 840D sl. 3) Vertical single-spindle turning center EMAG VLC100, max. workpiece diameter: 100mm, max. workpiece height: 150mm, max. chuck diameter: 160mm, max. swing diameter: 210mm, travel X/Z: 650mm/375mm, speed: 6000rpm, rapid traverse X/Z: 60m/min/30m/min, tool stations: 12, tool holder: VDI30, control: Siemens 840D sl. 4) Vertical hobbing machine EMAG VLC200H, max. workpiece diameter: 200mm, max. module: 4, travel X/Y/Z: 790mm/120mm/400mm, swivel range: +/-35°, control: Siemens 840D sl. 5) Vertical chamfering/deburring machine EMAG VLC100C, max. workpiece diameter: 100mm, max. workpiece height: 150mm, travel X/Z: 900mm/375mm, control: Siemens 840D sl. 6) Internal automation EMAG TrackMotion with 2x TransLift carriages. Type: transfer automation, purpose: part feeding/intermediate station transport/part removal, control: HT8. 7) O-belt automation for each EMAG machining machine with pallet and belt buffer, max. pallets: 24pieces/machine. 8) Marking press Markator for part marking. 9) Part handling unit EKF Automation in gantry design. 10) Basket stacking cell EKF Automation for the finished parts storage, number of stacks: 3. Documentation available. An on-site inspection is possible under power connection. Nodpfex Dm D Iex Akiown

Condition: excellent (used), I am selling this machine, connected, can be tested. Max. workpiece diameter ..... 1600 mm Module ..... 16 - Power of the main electric motor ..... 12 kW Dimensions l x w x h ..... 4300 x 2000 x 3170 mm Nwsdpfxov Nqppe Akien Machine weight ..... 18500 kg Can send a video of the machine, via whatsapp.

Condition: refurbished (used), Year of construction: 2027, functionality: fully functional, position of the milling head: Schwenkbar (40°), total length: 6,100 mm, gear diameter: 180 mm, total height: 3,450 mm, total width: 2,975 mm, input frequency: 50 Hz, type of input current: three-phase, spindle speed (max.): 4,000 rpm, spindle speed (min.): 300 rpm, travel distance X-axis: 100 mm, travel distance Y-axis: 200 mm, travel distance Z-axis: 300 mm, overall weight: 8,400 kg, tool diameter: 80 mm, controller manufacturer: Siemens Sinumerik ONE, drive type: Sinamics S120, control type: CNC control, Equipment: documentation/manual, rotational speed infinitely variable, A high-performance machine for series production: the horizontal Gleason-Pfauter P 210 L, built in 2003, mills shafts, pinion shafts, and small gears up to module 4 and 180 mm in diameter at speeds of up to 4,000 rpm on the cutter and 1,000 rpm on the workpiece – designed for short cycle times and dry machining. Serwema Retrofit Solutions, Chemnitz, completely overhauls the machine and delivers it with Siemens Sinumerik ONE, the latest generation of control systems with full spare parts and support availability. Modern Gleason-Pfauter kinematics, new electrical system, new drives, new safety technology: you get the performance of a new machine at a fraction of the price, and we will inspect it together with you in Chemnitz. The horizontal design makes the P 210 L ideal for shaft machining: workpieces up to 830 mm are clamped between the spindle and tailstock, with 300 mm of axial travel and 100 mm of radial travel (center distance 30–130 mm). The milling head pivots by ±40°, and the tangential travel of 160 mm utilizes the full cutter length of 170 mm for long tool life. The high workpiece speed allows for multi-tooth hobbing cutters and thus the cutting performance required in the gearbox and automotive component supply sector. The machine is prepared for connection to a loading portal or a robot. Nodoz Et Rzjpfx Akiown Technical data: max. workpiece diameter 180 mm, max. module 4, working area radial 100 mm (30–130 mm), axial 300 mm (260–560 mm), tailstock 350 mm (480–830 mm), max. cutter diameter 180 mm, max. cutter length 170 mm, tangential travel 160 mm, cutter speed 300–4,000 rpm, max. workpiece speed 1,000 rpm, swivel angle ±40°, total connection value 50 kVA. Installation dimensions approx. 6.1 × 3.0 × 3.5 m, weight approx. 8.4 t. The machine will be delivered with a new Siemens Sinumerik ONE control system and Sinamics S120 drives in an air-conditioned control cabinet manufactured in-house. The user-friendly interface makes setup and programming possible without in-depth G-code knowledge. Geometry acceptance is carried out according to the manufacturer's standard or DIN with a protocol. The scope of delivery also includes the complete machine enclosure with state-of-the-art safety technology, a new coat of paint in RAL 5015/7035, a magnetic chip conveyor, circulation and loss lubrication, a hydraulic unit, a coolant system, and the operating manual.

Condition: good (used), Year of construction: 2010, functionality: fully functional, machine/vehicle number: 06-13795, Technical characteristics: Work Area: - Elevation: 160 mm - Minimum center distance between table axis and spindle: -30 mm - Maximum center distance between table axis and spindle: +150 mm - Minimum distance between table surface and cutter spindle: 275 mm - Maximum distance between table surface and cutter spindle: 345 mm - Manual transverse displacement of the column: ±20 mm - External diameter: 250 mm - Bore diameter: 100 H7 mm Workpiece: - Maximum nominal module (in steel with tensile strength approx. 600 N/mm²): 3 mm - Minimum pitch diameter (internal gearing): 60 + d0s mm - Maximum external diameter (internal gearing): 280 mm - Maximum width of the toothed band: 42 mm - Maximum stroke length for tooth cutting: 50 mm - Maximum spindle travel: 70 mm Load Capacity: - Maximum table load (including fixtures): 150 kg - Maximum force exerted by the tailstock: 1,500 kg - Maximum achievable helix angle (hydrostatic guide): ~45° Cutter Spindle: - External diameter: 85 mm - Cutter holder bore: 45 H3 mm Electrical Equipment: - Operating voltage: 400 - 480 V - Control voltage: 24 V - Magnetic voltage: 24 V - Cable cross-section: 16 mm² - Connected power: 15 kW - Protection: 50 A Dimensions: Nwodpfjxwlmusx Akisn - Overall dimensions: Length = 2980 mm, Width = 1650 mm, Height = 2165 mm - Weight: 5700 kg Main Features and Capabilities: - Vertical design: Optimal chip evacuation and easy loading/unloading - CNC control: Siemens Sinumerik 810D/840D - High precision: Positioning accuracy via Heidenhain linear scales - Measuring system: Marposs T25 (for angular alignment or rotation zero-point definition) - Oil filtration and cooling system - Magnetic chip extraction conveyor Machine status: Operational (WORKING)

Condition: good (used), I am selling this machine, equipped, already disconnected, stored in stock. Video of the machine can be sent. Nedpfxstuipms Akiown max. wheel diameter 710 mm max. module 10 Spindle speed : 700-2800 1/ min. Machine weight : 13,500 kg

Condition: refurbished (used), workpiece weight (max.): 40,000 kg, table diameter: 2,500 mm, spindle speed (max.): 100 rpm, spindle speed (min.): 10 rpm, grinding spindle motor power: 24,000 W, outer diameter: 3,000 mm, overall weight: 40,000 kg, GEAR HOBBING MACHINE PFAUTER model P3001 New Siemens PLC with touch panel Spindle diameter: 2,500 mm Maximum workpiece diameter: 3,000 mm Maximum module: 25, in a single pass on C45 steel with a tensile strength of approximately 60 kgf/mm² Minimum number of teeth: 25 Maximum axial travel: 1,200 mm Table bore diameter: 500 mm Number of T-slots on the table: 12 Maximum table load: 40 tons Maximum gear hob diameter: 450 mm Tangential travel of the gear hob: 300 mm Gear hob rotation speed: 10–100 rpm, continuously variable across three ranges Main motor power (DC): 24 kW Weight: approximately 40,000 kg Complete with: - New electrical panel Nwedpfxs Adua Uj Akion - Internal gear hobbing head complete with gears, worm gears, and modules – overhauled - Overhauled ball screw - Overhauled guides - Tool holder slide - Double worm gear - Tool loading hoist - Tailstock - Hydraulic table clamping USED MACHINE, OVERHAULED

Condition: excellent (used), Year of construction: 2002, max. wheel diameter 250 mm gear width 600 mm max. module 8 min. module 0,5 spindle turning speed - stepless 225 - 1800 U/min control Siemens 840 D milling head -swivable +/- 45 ° table diameter 170 mm table hole 100 mm Nedpfx Ake Afzy Rjiswn clamping length max. 1310 mm total power requirement 55 kW weight of the machine ca. 11,2 t dimensions of the machine ca. 3,2 x 2,6 x 2,8 m

Condition: excellent (used), For sale: an industrial deburring machine from the German company Rolei Eisenblätter GmbH, model PEF 500. This device is designed for the precise removal of burrs, chamfering, and preparing the edges of steel, aluminum, and other metal parts. Manufacturer: Rolei Eisenblätter GmbH, Germany Model: PEF 500 Robust, steel construction V-shaped work table, ideal for guiding components Electric drive with safety switch Njdpfx Aksz Slc Eoiewn Application: edge finishing, chamfering, weld preparation, burr removal after cutting and machining The machine is in good working order and technical condition. The construction is very stable, making it ideal for workshops, metalworking shops, tool rooms, and serial production.

Condition: ready for operation (used), Equipment: documentation/manual, Lieberr - Lorenz S800 / Gear Hobbing Machine -Well-maintained machine with extensive accessories -1 pallet / Change gears -1 pallet / Hobbing cutters -1 pallet / Clamping arbors DOCUMENTATION Nwsdpfxezv Ed Ds Akien -Max. workpiece length with counter support 600mm -Max. workpiece length with retracted counter support 800mm -Max. travel of the milling slide 360mm -Largest millable pitch with the largest workpiece 5 PI / Normally 8 PI -Taper for spindle - Milling spindle MK 5 -Milling arbors / 22 / 27 / 32 / 40 mm -Max. cutter diameter 186mm -Max. cutter length 170mm -Max. cutter feed 80mm -Cutter speeds 40 - 220 rpm -Feeds infinitely adjustable / Horizontal -Feeds infinitely adjustable / Vertical -Feeds infinitely adjustable / Tangential -Clamping table without water trough 550mm -Clamping table bore 100mm -Clamping arbor taper MK 4 Dimensions: L x W x H 3.6 x 1.8 x 1.9 meters / Weight: 5000 kg Errors and omissions excepted.

Condition: used, Year of construction: 2010, max. wheel diameter 800 mm max. module 20 Nwjdpfx Ako Afar Seion Control SINUMERIK 840 D table rotation speed 50 U/min table load 95 kN Size of table plate 700 mm table bore diameter 250 mm Axial travel 1000 mm pivoting angle +/- 35 Grad 450 U/min tangential travel max. 320 mm tool diameter 315 mm total power requirement 50,00 kW weight of the machine ca. 16,00 t dimensions of the machine ca. 6,30 x 5,00 x H3,80 m