Used Ehlers for sale (128)

Condition: used, Year of construction: 1972, functionality: fully functional, machine/vehicle number: M06L/7593, Offer Number: M06L/7593 Machinetype: double blow header Make: PELTZER-EHLERS Type: DKP16 Bedpfswi S Swox Abbslr Constr. year: 1972 diameter range: 8-16 mm shaft length under head: 25-180 mm max. cut-off length: 220 mm output - pieces/min: 70 Location: In our warehouse

Condition: used, Hydraulic power pack, hydraulic pump, hydraulic pump Bljdpfx Abjb A Hdqsbjr -Max. Pressure: approx. 40 bar -Liter output: 15 l/min -Drive: 0.55 kW 1400 rpm -Hydraulic tank -Foot switch -Weight: 100 kg

Year of construction: 1977, condition: ready for operation (used), Dimensional range: M6-M14, length range: 110mm, number of strokes min./max.: 110strokes/125strokes/min, max. wire diameter: 15mm, slide stroke: 160mm, pressing force: 100t, oil capacity: 70l, oil type: CLP 68, clutch manufacturer: Ortlinghs, air consumption at 30 operations/min: 800l/min, weight: approx. 23000kg. Bedpfx Abjt Nhmhjbjlr

Condition: used, Year of construction: 1975, functionality: fully functional, machine/vehicle number: M04L/7486, Offer Number: M04L/7486 Machinetype: pointing machine Make: PELTZER-EHLERS Type: NBAM-16 Constr. year: 1975 Bjdpfjwi S T Ijx Abbjlr diameter range: 16 mm shaft length under head: 25 -160 mm output pieces/min: 110 Location: In our warehouse

Condition: used, Year of construction: 1970, functionality: fully functional, machine/vehicle number: M08L/7516, Offer Number: M08L/7516 Machinetype: 4 die - 4 blow transfer header Make: PELTZER-EHLERS Type: GB1 Constr. year: 1970 diameter range: 12 mm number of dies: 4 number of stations: 5 cutting length: 100 mm shaft length under head: 80 mm output - pieces/min: 125 press power: 65 to Location: In our warehouse Bsdpfx Abswi S Tnsbslr

Condition: used, Year of construction: 1975, functionality: fully functional, machine/vehicle number: M08E/7519, Offer Number: M08E/7519 Machinetype: 4 die - 4 blow transfer header Make: PELTZER-EHLERS Bjdpfjwi S Thsx Abbslr Type: GB3 Constr. year: 1975 diameter range: 10- 18 mm number of dies: 4 number of stations: 5 cutting length: 155 mm shaft length under head: 125 mm output - pieces/min: 90 press power: 200 to max diameter of the head: 35 mm Location: Europe

Condition: used, Year of construction: 1971, functionality: fully functional, machine/vehicle number: M14L/8133, Offer Number: M14L/8133 Machinetype: thread rolling machine - flat die Info: tube feeder for studs and headless parts Make: PELTZER-EHLERS Type: NKW12-ST8 Constr. year: 1971 diameter range: 6-12mm shaft length under head: 95 mm max. thread length: 90 mm Blsdpfx Abewi S Ireber output pieces/min: 55 Location: In our warehouse

Condition: used, Year of construction: 1978, functionality: fully functional, machine/vehicle number: M06L/8308, Offer Number: M06L/8308 Machinetype: double blow header Bedpfxowi S D He Abbolr Make: PELTZER-EHLERS Type: DKP6 Constr. year: 1978 diameter range: 3-6,5mm shaft length under head: 8-75 mm max. cut-off length: 100 mm output pieces/min: 150 Location: In our warehouse

Condition: used, Type Amb 6/4 VAI-Z In our assessment, the machine is in good used condition and can be inspected under power by appointment. Accessories, tools, and clamping devices shown are only included in the scope of delivery if this is noted in the additional information. Bledpfx Absxzuyrebsr Subject to changes and errors in the technical data and specifications, as well as prior sale!

Condition: used, grinding diameter 250 mm Bsdpfjxzuylox Abbslr grinding length 500 mm dimensions of grinding wheel 400 x 50 mm In our assessment, the machine is in good used condition and can be inspected under power by appointment. Technical features & accessories: - Tailstock - Various accessories Accessories, tools, and clamping devices shown are only included in the scope of delivery if this is noted in the additional information. Subject to changes and errors in the technical data and specifications, as well as prior sale!

Condition: used, Year of construction: 2005, control Heidenhain x-travel 900 mm y-travel 900 mm z-travel 500 mm a-axis -30/+110 ° c-axis 360 ° table diameter 800 mm table load 1.000 kg spindle tunring speed 18.000 U/min spindle drive 40 kW torque 137/100 Nm tool taper HSK-63 A number of tool places 30 Pos. max. tool diameter 90 mm max. tool length 300 mm max. tool weight 10 kg In our assessment, the machine is in good used condition and can be inspected under power by appointment. Bedpfexzk R Tjx Abbelr Accessories, tools, and clamping devices shown are only included in the scope of delivery if this is noted in the additional information. Technical data and specifications are subject to change without notice. Prior sale is reserved.

Condition: used, Year of construction: 2010, x-travel 1000 mm y-travel 1000 mm z-travel 1000 mm Control Heidenhain iTNC 530 tool taper SK 50 number of tool places 120 Pos. On-time hours ca. 66737 h spindle hours ca. 36316 h In our opinion, the machine is in good used condition and can be inspected under power by appointment. Technical Features & Accessories: - Fully protective cabin with sliding doors and interior lighting - Setup room - Tool measurement in the work area with BLUM laser - 3D measuring probe - Operating modes 3 bar internal coolant supply with 600 l tank and paper belt filter - Chip flushing gun with 1 bar/ l pump Bjdpfxexylqxe Abbelr - Chip conveyor - Brankamp monitoring system - 3-color signal light - Coolant ring nozzle - Blow-air cooling system - Coolant system - Oil/emulsion mist separation system - Control cabinet cooling unit - Operating manuals Accessories, tools, and clamping devices shown are only included in the scope of delivery if noted in the additional information. Subject to changes and errors in the technical data and information, as well as subject to prior sale!

Condition: used, Year of construction: 2003, x-travel 3.000 mm y-travel 1.000 mm z-travel 1.500 mm control Heidenhain TNC 430 spindle tunring speed 5.000 U/min tool taper SK 50 number of tool places 40 Pos. Number of working hours ca. 15.829 h In our assessment, the machine is in good used condition and can be inspected under power by appointment. Technical features & accessories: - Automatic swivel head with B-axis, infinitely variable - Internal coolant supply 20 bar - Air blower through spindle - Chip conveyor - Chip flushing Accessories, tools, and clamping devices shown are only included in the scope of delivery if this is noted in the additional information. Bjdpsxylqrofx Abbelr Technical data and specifications are subject to change without notice. Prior sale reserved.

Condition: used, Year of construction: 2014, x-axis 1.200 mm y-axis 3.000 mm Bljdpfx Abexyaf Dober z-axis 1.000 mm solution 0.0001 mm max. workpiece height 1.200 mm max. workpiece weight 3.000 kg In our assessment, the machine is in good used condition and can be inspected under power by appointment. Accessories, tools, and clamping devices shown are only included in the scope of delivery if this is noted in the additional information. Technical data and specifications are subject to change without notice. Prior sale is reserved.

Condition: used, Year of construction: 2010, x-travel 508 mm y-travel 356 mm z-travel 508 mm table dimensions 508 x 324 mm spindle tunring speed 10.000 U/min Tool cone CAT 40 spindle drive 15 kW tool magazine 24 Stationen rapid traverse 25,4 m/min feed 18,03 m/min weight 6,5 t In our opinion, the machine is in good used condition and can be inspected condition and can be inspected under power by appointment. Operating hours approx. 20,851 hours Accessories, illustrated tools and clamping devices are only included in the scope of delivery if this is noted in the additional information . Changes and errors in the technical data and information as well as prior sale reserved. Bsdexyafwjpfx Abbelr subject to prior sale

Condition: used, Year of construction: 2011, x-travel 4.000 mm y-travel 800 mm z-travel 1.000 mm surface area 835 x 4.500 mm control Heidenhain 530i rotary table Ø 800 / 360 mm/° Bljdpfx Abjxx A Nisbor NC swivel head +/- 105 ° spindle tunring speed 9.000 U/min tool taper SK 40 number of tool places 60 Pos. auto power on hours ca. 41.481 h spindle hours ca. 17.969 h In our assessment, the machine is in good used condition and can be inspected under power by appointment. Technical features & accessories: - NC swivel head - Rotary table - Wireless measuring probe - Direct linear encoder - Internal coolant supply 20 bar Accessories, tools, and clamping devices shown are only included in the scope of delivery if this is noted in the additional information. Technical data and specifications are subject to change without notice. Prior sale is reserved.

Condition: used, Year of construction: 2004, x-travel 3.000 mm y-travel 1.000 mm z-travel 1000 mm surface area 1.035 x 3.500 mm control Heidenhain 530i round table Ø500 mm / 360° mm/° NC swivel head +/-90 ° Bodpfexx A Ncox Abbelr spindle tunring speed 9.000 U/min tool taper SK 40 number of tool places 48 Pos. auto power on hours ca. 27.834 h spindle hours ca. 12.357 h In our assessment, the machine is in good used condition and can be inspected under power by appointment. Technical features & accessories: - NC swivel head - Rotary table - Wireless probe - Direct linear encoder - Internal coolant supply 40 bar Accessories, tools, and clamping devices shown are only included in the scope of delivery if specifically stated in the additional information. Technical data and specifications are subject to change without notice. Prior sale is reserved.

Condition: used, manufacture MONDIALE type Gallicop mm Blodpjxx A I Ssfx Abber In our assessment, the machine is in good used condition and can be inspected under power by appointment. Accessories, tools, and clamping devices shown are only included in the scope of delivery if this is noted in the additional information. Technical data and specifications are subject to change without notice. Prior sale is reserved.

Condition: used, Year of construction: 2001, x-travel 660 mm y-travel 460 mm z-travel 500 mm table dimensions 940 x 460 mm Control Yasnac J300 spindle tunring speed 12.000 U/min tool taper BT 40 number of tool places 30 Pos. Blodpjxxmmrsfx Abbjr In our assessment, the machine is in good used condition and can be inspected under power by appointment. Accessories, tools, and clamping devices shown are only included in the scope of delivery if this is noted in the additional information. Technical data and specifications are subject to change without notice. Prior sale is reserved.

Condition: used, Year of construction: 2016, x-travel 1.100 mm y-travel 610 mm z-travel 610 mm table dimensions 1.250 x 610 mm Control Heidenhain turning speeds 15.000 U/min rapid traverse 32 m/min feed 20.000 m/min number of tool places 60 Pos. spindle hours ca. 3108 h In our assessment, the machine is in good used condition and can be inspected under power by appointment. Bodpfx Aexwzhnsbbslr Accessories, tools, and clamping devices shown are only included in the scope of delivery if this is noted in the additional information. Technical data and specifications are subject to change without notice. Prior sale is reserved.

Year of construction: 2017, condition: used, engine 12 Zylinder cubic capacity 57200 ccm total power requirement 3.438 kW Electric capacity 1.516 kw thermal performance 1.425 kW Number of working hours ca. 34.683 h In our opinion, the machine is in good used condition and can be inspected under power by appointment. The combined heat and power unit is sold professionally dismantled and free on truck. Blsdoxwzhbepfx Abbsr Accessories, illustrated tools and clamping devices are only included in the scope of delivery if this is noted in the additional information. Changes and errors in the technical data and information as well as subject to prior sale.

Condition: used, spindle diameter 90 mm x-travel 700 mm y-travel 500 mm Control Heidenhain bore capacity in steel 40 mm spindle taper MK 4 bore spindle stroke 170 mm spindle turning speed - stepless 10-2.000 U/min ll diameter 230 mm table dimensions 900 x 770 mm Blsdpfx Asxwzg Rjbbjr vertical travel of crossrail-slide 630 mm boring spindle 6 Stück/ 0.02-0.20 U/min distance between columns 900 mm Passage between spindle and table 815 mm spindle drive 4 PS total power requirement 380 V weight of the machine ca. 3,9 t In our assessment, the machine is in good used condition and can be inspected under power by appointment. Accessories, tools, and clamping devices shown are only included in the scope of delivery if this is noted in the additional information. Technical data and specifications are subject to change without notice and errors. Prior sale is reserved.

Condition: used, manufacture Tucker Type ERC80/ERF23FBGR/ERT Bodpfxoxwp Nye Abbolr In our opinion, the machine is in good used condition and can be viewed under power by appointment. Punch riveting system: - ERC80 - ERF23 - BGR - ERT There are approximately 150 pieces available. Accessories, tools and clamping devices shown are only included in the scope of delivery if this is noted in the additional information. Changes and errors in the technical data and information as well Subject to prior sale!

Condition: used, Year of construction: 2010, x-travel 700 mm y-travel 420 mm z-travel 610 mm Control Heidenhain iTNC 530 spindle tunring speed 30.000 U/min tool taper HSK E50 number of tool places 28 Pos. Bsdpfxexgiclj Abbolr In our opinion, the machine is in good used condition and can be inspected under power by appointment. Technical Features & Accessories: - 4+5 axes - Clamping device, Erowa Power Chuck ITS148 - Clamping device, Erowa UPC - Blum laser - Renishaw 3D probe - Extraction system Accessories, tools, and clamping devices shown are only included in the scope of delivery if noted in the additional information. Subject to changes and errors in the technical data and information, as well as subject to prior sale!

Condition: used, Year of construction: 2005, Type Honanlage Control Nagel In our opinion, the machine is in good used condition and can be inspected under power by appointment. Two machines are available. Bedpfxexwdxio Abbelr Accessories, tools, and clamping devices shown are only included in the scope of delivery if noted in the additional information. Subject to changes and errors in the technical data and information, as well as subject to prior sale!