Used Edgebander Edgebander for sale (818)

Condition: ready for operation (used), Year of construction: 2024, workpiece height (max.): 60 mm, feed rate X-axis: 10 m/min, spindle speed (max.): 16,000 rpm, control type: PLC-controlled, The machine has already been disassembled and stored by a specialist. TECHNICAL DETAILS Rotational speed of the miter saw station: approx. 16,000 rpm Rotational speed of the milling station: approx. 16,000 rpm Maximum milling depth: 3 mm Design for edge thickness: 1 mm Hot melt adhesive specification for edge material max.: 3 mm Feed rate: approx. 10 m/min Maximum workpiece thickness: 60 mm EQUIPMENT Maintenance-free, coated glue basin with provision for interchangeable basins Glue dispensing device Pneumatic milling adjustment Combination design with interchangeable plate cutter Corner rounding milling cutter Radius drawing blade Surface drawing blade with pneumatic extraction device Cleaning station Robust chain drive Ball-bearing mounted double roller pressure pad Aggregate viewing window from the machine's rear and operator side Nedpfx Aijzb Idfeyocu Signal lamp for workpiece sequence Extendable workpiece support ACCESSORIES Hebrock 8 mm version Hebrock quick-change system for corner milling cutter Hebrock jointing up to 60 mm workpiece thickness Hebrock protective spray for edges Hebrock nesting (milling cutter + radius drawing blade) Hebrock Airtronic Note: Accessories are provided without guarantee. The principle applies: "Item purchased as seen." The prospective buyer must verify the completeness of the item on-site.

Condition: ready for operation (used), Year of construction: 2017, functionality: fully functional, total height: 2,100 mm, total length: 6,700 mm, total width: 1,050 mm, empty load weight: 3,500 kg, Equipment: CE marking, TECHNICAL DETAILS The machine has the following configuration: 1. Unit: Nordson pre-milling unit (tools included) 2. Unit type: Gluing unit 3. Unit type: Pressure rollers (tools included) 4. Unit type: Rough milling unit 5. Unit type: Cut-off unit 6. Unit type: Fine milling unit Njdpszdzmkefx Aiyjcu MACHINE DETAILS Number of units: 6 Voltage: 400 V Power consumption: 41 A Fuse: 50 A Dimensions (L x W x H): 6,700 x 1,050 x 2,100 mm Weight: 3,500 kg Transport packages: 5 EQUIPMENT CE marking

Condition: excellent (used), Year of construction: 2018, Specification Length: 4605mm Workpiece Thickness: 40mm Edge Material Roll: 0.4 – 3mm Edge Material Strip: 0.4-3mm Feed Speed 8m/min Joint Trimming Unit 40mm Quick Change Application Unit Magazine for Coiled Material Pneumatic 2 point adjustment Pressure Zone End Trim Unit with Pneumatic Adjustment Pneumatic Adjustment Fine Trim Contour Trimming Unit Pneumatic Adjustment Profile Scraping Unit Glue Joint Scraper Buffers LED Indoor Lighting Nedpfx Aiszdklcsyscu EasyTouch Control System Manual Central Lubrication Manual Top Pressure Adjustment Roller Top Pressure

Condition: used, machine/vehicle number: 006619, Position 1: Panel Feeding and Loading IMA + MEINERT-COMBIMA/I/R75/2050 Ncjdeqy Em Nopfx Aiysu Position 2: Double Squaring Machines IMA + MEINERT-COMBIMA/I/R75/2050 Position 3: Panel Turning Device IMA + MEINERT-COMBIMA/I/R75/2050 Position 4: Single Edgebanders IMA + MEINERT-COMBIMA/I/R75/2050 Position 5: Roller Conveyors IMA + MEINERT-COMBIMA/I/R75/2050 Position 6: Single Edgebanders IMA + MEINERT-COMBIMA/I/R75/2050 Position 7: Panel Turning Device IMA + MEINERT-COMBIMA/I/R75/2050 Position 8: Panel Stacking and Offloading IMA + MEINERT-COMBIMA/I/R75/2050

Condition: used, machine/vehicle number: 007357, Position 1: Panel Feeding and Loading BIESSE - RBO-STREAM SB2 9.5 Ncsdpfx Aiewuz Rteyeu Position 2: Double Sided Squaring/Edgebanding Machines BIESSE - RBO-STREAM SB2 9.5 Position 3: Panel Turning Device BIESSE - RBO-STREAM SB2 9.5 Position 4: Double Sided Squaring/Edgebanding Machines BIESSE - RBO-STREAM SB2 9.5 Position 5: Panel Turning Device BIESSE - RBO-STREAM SB2 9.5 Position 6: Panel Stacking and Offloading BIESSE - RBO-STREAM SB2 9.5

Condition: used, machine/vehicle number: 007857, Position 1: Horizontal Storage Systems IMA + MEINERT-COMBIMA SYSTEM/I/R75/1170/F/R3 Position 2: Beam panel saws with automatic warehouse IMA + MEINERT-COMBIMA SYSTEM/I/R75/1170/F/R3 Position 3: Single Edgebanders IMA + MEINERT-COMBIMA SYSTEM/I/R75/1170/F/R3 Position 4: Panel Feeding and Loading IMA + MEINERT-COMBIMA SYSTEM/I/R75/1170/F/R3 Position 5: Panel Stacking and Offloading IMA + MEINERT-COMBIMA SYSTEM/I/R75/1170/F/R3 Position 6: CNC Machine Centres For Routing, Drilling And Edgebanding. IMA + MEINERT-COMBIMA SYSTEM/I/R75/1170/F/R3 Position 7: CNC Machine Centres For Routing, Drilling And Edgebanding. IMA + MEINERT-COMBIMA SYSTEM/I/R75/1170/F/R3 Position 8: Cardboard Cutters IMA + MEINERT-COMBIMA SYSTEM/I/R75/1170/F/R3 Position 9: Strapping machine IMA + MEINERT-COMBIMA SYSTEM/I/R75/1170/F/R3 Ncjdpfjwuuf Dox Aiyou

Condition: used, Year of construction: 2016, Used machine Year of manufacture: 2016 Condition: Currently still in production Equipment and technical data: Glue pot Pressure zone Cut-off saw Combination milling (radius 2 mm), flush trimming Workpiece thickness: 8 - 50 mm Minimum workpiece width: approx. 75 mm Minimum workpiece length: approx. 120 mm Edge thickness: 0.4 - 3.0/5.0 mm Maximum edge height = workpiece height + 4 mm (2+2) Electrical connection: 400V, 50 Hz, 3-phase Ncodpfx Aeynpc Njiyju Total connected load: 3.2 kW Feed speed: 8.0 m/min Pneumatic connection: 6 bar Net weight: 550 kg Optional retrofits for the machine: Radius scraper Flat scraper Buffing unit Location: NRW Availability: Approx. December 2025

Condition: used, Year of construction: 2003, Used machine Year of manufacture: 2003 Equipment and technical data: - MAGELIS control system Ncodpfx Aexymfwjiyju - For EVA-based hot-melt adhesive - Jointing: 2 x 1.5 kW, u=12000, 200 Hz - End trimming: 2 x 0.2 kW, automatic swiveling 0°/3°, 2 HM saw blades 140 mm - Flush trimming: 2.07 kW, with WPL heads HF 70, diameter 70 mm - Radius trimming: R2 - Radius scraper - Surface scraper - Glue pot above - Workpiece dimensions: - Minimum width: 70 mm - Thickness: 8-42 mm - Minimum length: 150 mm - Edge thickness: 0.2-6 mm - Feed rate: 12 m/min - Extraction port: 160 mm Dimensions: 4,500 x 1,250 x 1,300 mm Weight: 1,650 kg Availability: short notice Location: Baden-Württemberg

Condition: new, Year of construction: 2024, New machine Year of manufacture: 2024 (arrived 2025) MACHINESEEKER ENQUIRIES: Please understand that we do not offer this new machine outside our sales territory in Germany (Rhine-Main area and North Rhine-Westphalia). Such enquiries will not be answered. Technical specifications: Edge thickness, coil material: 0.4 – 3 mm (material dependent) Edge thickness, strip material: 0.4 – 8 mm (material dependent) Edge cross-section: max. 6 x 42 mm Edge height: max. 65 mm Workpiece thickness: 6 – 60 mm (restrictions possible for certain units) Workpiece width: min. 65 mm Workpiece length: min. 160 mm (without corner copying) Workpiece length: 180 mm Feed speed: 10 m/min Configuration: - Motorised pressure bridge adjustment - Pull-out workpiece support XL, spacing 600 mm - LED light at infeed, 3-colour - Motorised infeed fence adjustment - Extended infeed fence, 1,252 mm - I-Tronic package - Edge Control PPC 322 W controller - IntelliSet: intelligent tool offset - f.a.s.t = fast setting technology - ECO-Mode energy saving function Ncodpjy Nuf Tofx Aiysu - Prepared for RETURN connection (third-party product) - BS 501 guiding system; precise right-angle workpiece feed for edgebanding of narrow parts on end grain - Workpiece thickness: min. 10 mm - Workpiece width: min. 60 mm - Workpiece length: approx. 140 – 450 mm - FG201 jointing unit with 2 milling heads, 64 mm high - MG 301 edge feeder - GluJet GJ 725 NC PUR PRO glue application system - Automatic glue height adjustment via dosing sleeve and sensing nozzle to compensate for panel tolerances - NC axis for height adjustment - 90° swivelling for easy cleaning of the Glue Jet nozzle - Includes vacuum pump for professional processing of PUR adhesives. The vacuum pump removes the reaction partner (water molecules) from the PUR, allowing uncured PUR adhesive to remain in the system. The pump operates independently of the machine’s power supply and automatically compensates for vacuum loss. - Full control of PUR! - DW 301 pressure unit with motorised NC axis; first roller driven with pneumatic plunge control, 2 conical follow-up pressure rollers - GM301 spray unit after pressure section for high-gloss edges (slip agent) - KA 501 end trimming unit, pneumatic (60 mm) - Extraction hoods for end trimming unit - FR301 MOT6 multifunction milling unit - Shelf program - FF 301 MOT1 profile milling unit - ZK301 MOT4 scraper unit incl. high-gloss kit - FK702 surface scraper - Spray unit for separation and cleaning agent, complete - GM 301 spray unit after pressure section (high-gloss edges) - SW 501 buffing unit Piping above the machine is not included in the scope of delivery. Availability: short notice Location: Hochheim

Condition: used, Year of construction: 2019, Used machine Year of manufacture: 2019 Condition: Good (the machine has undergone extensive maintenance every year, most recently in March 2026!) Equipment: - iTronic – Adaptive pressure and glue quantity control with automatic, program-dependent fine adjustment - MOT SPS adjustable infeed fence - Automatic chain lubrication: Intelligent automatic transport chain lubrication - Edge Control 19 control system - EL GRM variable, 400V 50Hz, 2.2kW V2 SPRINT 1329 PERFORMANCE 400V 50Hz - Edge Control 19 control system with 18.5" touchscreen color display, 16:9 format - ECO MODE energy-saving mode: An automatic standby circuit - Jointing unit 1802 (2 x 2.0 kW, 200 Hz, 12,000 rpm) with 2 milling units for jointing panel edges - Diamond cutter, Ø 70 x 64 x 30 mm, Z2+2, left-hand rotation, Air Stream System (HOLZ-HER / LEUCO Patent) - Diamond cutter, Ø 70 x 64 x 30 mm, Z2+2, right-hand rotation, Air Stream System (HOLZ-HER / LEUCO Patent) - Edge feed 1901 SYNCHRO: automatic transport of coil and strip material - Glue application station Glu Jet GJ301 automatic (2.3 kW, 50 Hz) - DW501 SPS motorized SPRINT - GM501 spray device after the printing unit with lubricant (recommended for high-gloss edges) - End trimming unit 1918 (60 mm) pneumatic (2 x 0.45 kW, 12,000 rpm) pneumatically tiltable 0/10° - Milling unit FR701: 100% repeat accuracy at the push of a button due to backlash-free mechanics - Air Stream System multi-cutter, diamond Ø 70.9 x 16 mm, Z = 2+2 - Form milling unit FF701: 100% repeat accuracy at the push of a button due to backlash-free mechanics - Diamond cutter, Ø 72.5 mm x 19 mm, Ø 20 mm Z = 4, radius R = 2 mm, left-hand rotation with CM technology - Diamond cutter, Ø 72.5 mm x 19 mm, Ø 20 mm Z = 4, radius R = 2 mm, right-hand rotation with CM technology Nodpfx Ajy Hyl Tjiyscu - Scraper unit 1929 MOT4 incl. high-gloss package with motorized adjustment of the tracing rollers - HW reversible knives for scraper holder, R = 2.0 mm (2 pcs. required) - Flat scraper FK701 with pre- and post-sensing for removing adhesive residue - TR501 spray unit for infeed and outfeed (separating and cleaning agent) - Includes nesting shoes below with their own spray unit Location: Hesse Availability: Approx. July 2026

Condition: used, Year of construction: 1997, Used machine Year of manufacture: 1997 Condition: well-maintained Equipment and technical data: Machine with PLC control Feed speed: 12/16 m/min Edge feed for roll and strip material, automatic 1901 Glue application cartridge 1906 with sensing nozzle Pressure unit pneumatic, motorized adjustment to edge thickness 1926 End trimming unit, twin-motor, pneumatically tiltable 1918 Milling unit, fixed up to 30 mm 1962 Milling unit MOT 5 with multifunctional flush, radius, bevel 1966 Radius scraper 1927 Corner copying 1983 Surface scraper 1964 Buffing unit 1944 Air blow nozzles Technical data: Workpiece thickness min./max.: 6/60 mm Nedpfoyamcwox Aiyjcu Workpiece width min.: 60 mm Workpiece length min.: 140 mm Edging thickness max.: 13 mm Weight: 1,350 kg Machine dimensions: 5,850 x 1,000 x 1,750 mm Location: Röllbach Availability: short-term

Condition: good (used), Year of construction: 2017, NUMERICALLY CONTROLLED EDGE BANDER WITH PRE-MILLING (SPINDLES) & CORNER ROUNDING UNIT Brand: SCM Model: K 360 HP-T-ER1 Serial No.: AH/120944 Ref: 123304 Year: 2017 WORKING CAPACITIES: - Panel height to be machined: 8 - 58 mm Thickness 10 to 45 mm when using rounding unit - Panel length for edgebanding: 210 to 2500 mm - Minimum panel width to be machined: 90 to 1100 mm - Edge thickness in coil: 0.4 to 3 mm without rounding max 3 mm with rounding unit - Edge thickness in strips: max 6 mm without rounding max 3 mm with rounding unit - Edge width: panel thickness + 2 mm each side - Feed rate: 11 m/min - Minimum gap between panels: 600 mm - Panel overhang beyond the transfer chain: 30 mm MACHINE CONFIGURATION: - StarTouch control - Prepared for barcode reader - Reel holder table Ø800 mm - Front extension table - Easy size: digital positioning of infeed fence and panel passage height - Anti-adhesive spray unit - Pre-milling unit (RT-V trimmer) 12,000 RPM - Infrared panel preheating at infeed - Glue application unit (VC-VM) with interchangeable glue pot for granules, capacity: 1 kg. Heating time: 12 minutes Pneumatic pre-cut guillotine Digitally positioned pressure station with 3 rollers (1 roller powered and with timer) - Trimming unit (end cutting) tiltable 0-20° 12,000 RPM - Top/bottom flush trimming unit with digital positioning and copying system. 2 mm radius (or chamfer) router 12,000 RPM - Corner rounding unit R2 mm, 12,000 RPM, digital positioning - Top/bottom R1 & R2 mm radius scrapers with digital positioning Ncodpsrx S Ipofx Aiyju - Top/bottom straight scrapers - Edge finishing spray device (Nebulizer) OTHER FEATURES: - Pre-milling group motors: 2x2 kW - End trimming motors: 2x 0.19 kW - Lift/lower motor: 0.30 kW - Feed motor: 1.1 kW - Flush trimming group motors (milling): 2x 0.65 kW - CE Marked - Lockable isolator, emergency stop buttons - Power supply: 380 V, three-phase, 50 Hz - Pneumatic supply: 8-10 bar max, dry air - Extraction: 1x Ø100 mm and 5x Ø80 mm Spindles: 780 m³/h Edge trimming: 360 m³/h Scrapers: 2x360 m³/h Max. footprint in working order: 10.80 x 2.40 m Dimensions for transport (LxWxH): 4.85 x 1.20 x 1.70 m Weight: 1568 kg Machine supplied with mounted tools, manual, spare parts list and diagrams.

Condition: used, machine/vehicle number: 008269, Position 1: Panel Feeding and Loading IMA+BARGSTEDT+SAG-COMBIMA/CONCEPT/II/500/B/R3 Position 2: Panel Turning Device IMA+BARGSTEDT+SAG-COMBIMA/CONCEPT/II/500/B/R3 Position 3: Double Sided Squaring/Edgebanding Machines IMA+BARGSTEDT+SAG-COMBIMA/CONCEPT/II/500/B/R3 Position 4: Panel Turning Device IMA+BARGSTEDT+SAG-COMBIMA/CONCEPT/II/500/B/R3 Njdpfxsx A Hggo Aiyocu Position 5: Panel Stacking and Offloading IMA+BARGSTEDT+SAG-COMBIMA/CONCEPT/II/500/B/R3

Condition: good (used), Year of construction: 2010, machine/vehicle number: 0 - 251 - 20 - 4507, functionality: fully functional, Due to a switch to solid wood processing, this machine has been used very little and is in good condition. Available for viewing in the workshop. Njdpfx Asxzp Uwoiyjcu

Condition: used, Year of construction: 2023, machine/vehicle number: Profi-HPP300/43/43, functionality: fully functional, operating hours: 4,134 h, input frequency: 50 Hz, type of input current: three-phase, workpiece height (max.): 3,200 mm, workpiece length (max.): 3,800 mm, HOMAG SAWTEQ S-300 profile line CNC panel dividing saw (Profi-HPP300/43/43) with a large touchscreen and a maximum speed of 150 m/min. Specifications Manufacturer: Homag GmbH (Germany) Type: SAWTEQ S-300 profile line Design: CNC panel saw Configuration: Profi-HPP300/43/43 Year of manufacture: 12-2023 Serial number: 0-240-87-3107 Control: large touchscreen Capacity/max.: 3,200 x 3,800 x 5,600 mm Speed: 150 m/min CE: yes Design/features Clamping bar Additional loose blades Ball-roller table with air jets Dust extraction pipes Receipt printer Homag/Pica Machine manuals available Ncjdpfx Aszd Dlijiyju Recorded operating hours: Number of cuts: 31,843 Operating time: 4,134.18 hours Main operating time: 587.18 hours Condition Used Has already been professionally disassembled and moved by Kisjes Transport Apeldoorn (using a combination vehicle). Dimensions Assembled: 645 x 831 cm Photos Photo 1 to 21: assembled installation at its original location Photo 21 to 51: disassembled installation at the current storage location Auction information

Condition: excellent (used), Year of construction: 2000, Technical data: • Manufacturer: Hebrock GmbH (Made in Germany) • Type: EURO 2000 • Year of manufacture: 2000 • Voltage: 230 / 400 V • Frequency: 50 Hz Nsdpfx Aiozbyvaoyecu • Power: 7 kW • Current consumption: 13.6 A Working range: • Workpiece thickness: approx. 10 – 50 mm • Edge thickness: approx. 0.5 – 3 mm • Minimum workpiece length: approx. 250 mm • Minimum workpiece width: approx. 70 mm • Feed rate: approx. 10 m/min • Compressed air connection required (approx. 6–7 bar) Location: in stock at warehouse 54634 Bitburg - immediately available -

Condition: used, machine/vehicle number: 007227, Position 1: Single Edgebanders HOMAG + LIGMATECH-KAL 310 + ZHR 05 Nedpfx Aiewuuc Aeyecu Position 2: Panel Return Systems HOMAG + LIGMATECH-KAL 310 + ZHR 05

Condition: used, machine/vehicle number: 006574, Type of edging: Thin edge, Thick edge, Solid wood, Veneer Gluing System: EVA Hotmelt Premilling Unit: yes Corner Rounding Unit: yes Ncedpfx Aievxxuxjysu Max feed speed: 25 m/min Maximum panel thickness: 60 mm Operating Units: 7 nr

Condition: used, Year of construction: 1992, Used machine Year of manufacture: 1992 Max. workpiece height approx. 40 mm Min. workpiece length approx. 250 mm Min. workpiece width approx. 70 mm Feed rate approx. 11 m/min Ready for operation in approx. 4-5 min Power consumption approx. 11 kW With quick-heating glue reservoir Pneumatic edge trimming up to 3 mm With cross-cut saw for edge thickness up to 5 mm Ncjdpfx Aiex Rr Dvsyeu With milling station, optionally equipped with combined reversible blade cutters for radius, straight and chamfer milling Outrigger, foldable and extendable to the front With chassis L x W x H: 3600 x 1400 x 1200 mm Weight approx. 670 kg Availability: short-term Location: Flörsheim

Condition: used, Year of construction: 2001, Workpiece thickness min./max.: 6/45 mm Edge banding thickness: 0.4 - 3 mm Edge banding height max.: 51 mm Edge banding strip length min.: 350 mm Edge banding overhang in height per side max.: 3 mm Workpiece width min.: 60 mm Workpiece length min.: 180 mm Overall length: 3700 mm Width: 1440 mm Height max.: 1970 mm Njdpoy Dd Iyjfx Aiyocu Workpiece infeed height: 850 mm Weight: approx. 850 kg Storage location: Nattheim

Year of construction: 2023, condition: good (used), Edge banding, edge banding, veneer roll -Manufacturer: Rehau, edge band Raukantex 3 rolls -Type: Raukantex FP 28/1 97556 Njdpfst Uwxwex Aiyecu -Color: gray -Dimensions: 28 x 1 mm -Carton: Contents 3 rolls x 100 m -Quantity: 1 boxes available -Price: per carton -Carton dimensions: 490/490/H100 mm -Weight: 9.2 kg/carton

Condition: used, Year of construction: 2018, Edge banding machine AKV 3006 DK - F with jointing unit, including DIA tools • Jointing capacity up to 40 mm • Workpiece thickness up to 3 mm • Combination milling station, radius R 2.5 mm Technical Description: - Hot melt adhesive application to the workpiece for edge materials up to 3 mm - Workpiece thickness up to 60 mm without jointing unit, up to 40 mm with jointing unit - Maintenance-free, coated gluepot - HF end-trimming unit (16,000 rpm) for front and rear edge overhang - HF milling station (16,000 rpm) with replaceable cutter heads (combination version) and fine adjustment from the operator side - Free spaces for additional processing units (Hebrock system) - Feed speed approx. 10 m/min - Cutting depth adjustment of the end-trimming saw - Signal lamp for workpiece flow - Robust chain feed Ncsdpfxsx S Hmzo Aiyju - Ergonomically arranged control panel - Double roller upper pressure beam - Aggregate windows on machine rear and operator side - PLC control with touchscreen included Technical Data: - Feed rate: 10 m/min - Panel thickness: 8 – 40 mm - Weight: approx. 1550 kg (depending on configuration) - Dimensions (L x W x H): 5250 x 1445 x 1600 mm Airtronic incl. cooling and antistatic spray system (2014) • 1 pc hot air unit for visual zero joint using special edge materials • Including pneumatic gluepot positioning • Including cooling and antistatic spray system • Including 2 additional quick-change edge channels • Including special version corner rounding unit; max. workpiece thickness 60 mm, min. length 200 mm - Exclusively for Hebrock 3000 series edgebanders - Retrofitting possible at extra cost upon request Technical Data (special unit): - Max. panel thickness: 40 mm - Edge thickness: 1.2 – 2.0 mm - Feed speed: 7 – 10 m/min - Air consumption: approx. 280 – 580 l/min (only Airtronic), electronically controlled - Ready for operation after approx. 2 min Upgrade to 8 mm edge thickness possible; max. workpiece thickness 40 mm • Including pneumatic saw adjustment (special version, min. workpiece thickness 8 mm) • 3-point pneumatic milling shift • Selector for radius/chamfer/flush for combination milling stations, eliminating manual changeover (PLC control required) Buffing station (swab): 1 pc Corner rounding unit: 1 pc incl. combination tooling and pneumatic radius/chamfer adjustment, max. 40 mm workpiece thickness, min. 300 mm workpiece length, Radius R 2.0 mm Radius scraper: 1 pc with pneumatic lift, Radius R 2.0 mm Flat scraper: 1 pc with pneumatic actuation Complete chassis: 1 pc Glue station quick-change system incl. glue discharge system (downward outlet in preparation), 1 pc (no second gluepot), machine can process PU adhesive Grooving unit (vertical for panel): 1 pc incl. pneumatic lift, vertical groove, groove width 8.2 mm, groove depth 8.0 mm, distance from panel edge 14.0 mm; special motor version with higher performance Extraction for internal jointing unit: 1 pc connected to machine's extraction manifold Corner rounding cutter ball bearings: 24.1 mm (1 pc), 24.2 mm (1 pc) Edge protection spray system: 1 pc for sensitive edge materials Combined spray system (separating and cleaning agent): 1 pc Location: Supplier stock

Condition: used, machine/vehicle number: 008627, Type of edging: Thin edge, Thick edge, Solid wood Ncedpfx Aezakdfjiyeu Gluing System: EVA Hotmelt, PUR Premilling Unit: yes Corner Rounding Unit: yes Max feed speed: 14 m/min Maximum panel thickness: 60 mm Operating Units: 7 nr

Condition: used, machine/vehicle number: 008350, Type of edging: Thin edge, Thick edge, Solid wood Gluing System: PUR Premilling Unit: yes Nedpfxsx A Tgys Aiyscu Corner Rounding Unit: yes Max feed speed: 20 m/min Maximum panel thickness: 60 mm Operating Units: 7 nr

Condition: new, SCM Olimpic 500 HT - Automatic edge banding machine New machine with warranty. - Olimpic 500 - "HP T-ER2" version - "eye-S" control console (control panel) - Human-machine interface (HMI) software "Maestro active edge" - Fine trimming and radius cutter head, radius = 1 mm - Fine trimming and radius cutter head, radius = 2 mm - Electronic positioning of the upper pressure bar - Spacers on the infeed guide rail - "SAVENERGY" kit - Interior lighting of the machine housing and the edge banding area - "Nesting" contact rollers - "AAR" 1 release agent spray unit - Spray unit for final finishing of the edge - Spray unit for sensitive edges - Joining unit "RT-V1" - "EASY SIZE" device - Gluing unit "VC-VM" - Ceramic lamp with infrared radiation - Electronic positioning of the pressure rollers Ncedpfx Aezgf Ideiysu - Trimming unit "K-2 Radius" - Chamfer and radius milling unit "R-HP Multiedge 2R" - Rounding unit "Round 2-A Multiedge 1R" - MULTIEDGE 3 kit, 3 automatic positions straight/R/R, for "Round 2-A" - Radius cutter head "RAS-HP Multiedge 2R" - Planing cutter "RC-N" - Buffing unit "SP-V" Machine is new and still in its original packaging. Commissioning possible in Germany and Austria. Currently, a subsidy of 15% is possible in Germany; we will be happy to assist you with this. Special offer machine at a special price.