Used Chamfer for sale (368)

Condition: used, Year of construction: 1991, Used machine Year of manufacture: 1991 Max. workpiece height approx. 40 mm Min. workpiece length approx. 250 mm Min. workpiece width approx. 70 mm Feed rate approx. 11 m/min Ready for operation in approx. 4-5 min. Power consumption approx. 11 kW With heated infeed fence With quick-heating glue pot Pneumatic roller end trimming up to 3 mm With cross-cut saw for edge thicknesses up to 5 mm Milling station optionally equipped with combination indexable insert cutters for radius, straight, and chamfer milling Outrigger, foldable and extendable to the front With undercarriage With integrated extraction system Dimensions (L x W x H): 3600 x 1400 x 1200 mm Weight approx. 670 kg Availability: short-term Lodpfswka Tljx Al Ijhh Location: Flörsheim

Condition: used, Year of construction: 1998, Used machine Year of manufacture: 1998 Proven quick heating tank; heating time approx. 5 minutes. Safety interlock for the application roller; the roller engages only after reaching operating temperature. Centrally height-adjustable upper pressure bar. Edge feeding and roll separation pneumatically controlled. Lhsdpfxjw Tfw Ho Al Ieh Connected load: approx. 11.5 kW, heating power 4.5 kW, frequency inverter 300 Hz, 4 kVA. HF crosscut saw unit: electrically and pneumatically controlled, motor power 0.37 kW. Saw blade diameter: 100 mm HF flush milling unit: for radius, straight and chamfer milling. Crosscutting from rolls up to 3 mm. Edgebanding and crosscutting up to 5 mm. Minimum workpiece length: 260 mm Minimum workpiece width: 90 mm Workpiece thickness: Chamfer milling from 10 mm / radius milling from 13 mm / max. 45 mm Extendable workpiece support at front. Digital position display for feed height adjustment, edge thickness, and milling. With chassis. With heated infeed ruler. Compressed air connection: 6 bar Central extraction port: 100 mm Dimensions (L x W x H): 3115 x 1230 x 1200 mm Approx. 560 kg Availability: short notice Storage location: Flörsheim

Condition: used, Year of construction: 1989, Used machine Year of manufacture: 1989 Condition: Function tested Lhjdow I U E Aepfx Al Ish Equipment and technical data: Max. edge thickness: 20 mm Max. edge height: 51 mm Max. thickness of coil material: 3 mm Min. workpiece length: 140 mm Min. workpiece width: 60 mm Glue system: 1906 cartridge Pressure unit Milling unit 1920 for flush milling up to 20 mm and chamfer milling Required space (LxWxH): 3150x1800x1375 mm Weight approx.: 800 kg Location: Flörsheim Availability: Short-term

Condition: used, Year of construction: 2006, Used machine Year of manufacture: 2006 Condition: completely overhauled Equipment and technical data: - fitted with new glue application system - manually adjustable infeed fence - milling unit 1961 - edge feeder 1903 - glue application station 1906 with tracking nozzle - pressure unit 1816, pneumatic - end trimming unit 1822 - milling unit 1942 M for radius, chamfer, flush trimming - complete air nozzle - scraper unit 1929 - chip collection box - surface scraper 1964 - extraction hood set - complete safety covers - total length: 5,291 mm - workpiece thickness: min. 6 / max. 50 mm - edge band thickness depending on configuration: 0.4–5 mm - max. edge band height: 55 mm - minimum edge band strip length: 350 mm - max. edge band overhang/height per side: 3 mm - minimum workpiece width: 60 mm - minimum workpiece length: 180 mm - feed speed: 12.5 m/min Ledpfx Aewka H Sol Iohh - extraction: - jointing/milling unit: 900 m³/h - milling unit: 280 m³/h - scraper unit: 280 m³/h - static vacuum: - jointing/milling unit: 1,490 Pa - milling unit: 1,650 Pa - minimum air velocity: 20 m/sec - jointing/milling unit connection: 70 mm - scraper unit connection: 70 mm - compressed air: 6 bar Availability: short notice Location: Röllbach

Condition: used, Year of construction: 2008, Used machine Year of manufacture: 2008 Condition: currently still in production Features and technical specifications: Edgebanding max. 8-55 mm Incl. swiveling control panel HF jointing unit with 2 motors Incl. quick-heating, exchangeable, Teflon-coated glue pot Incl. electronic positioning of pressure rollers Incl. tilting double end-trim saw unit Incl. flush milling unit Incl. application-controlled chamfer, radius, and corner copying unit with nesting package Incl. radius scraper with nesting package Incl. surface scraper Incl. grooving unit Incl. buffing unit Incl. spraying unit Availability: short-term Lhsdpfx Asw Nadgel Ioh Location: Flörsheim

Condition: used, Year of construction: 1997, pressure 130 t chamfer lenght 3060 mm distance between columns 2690 mm column arm 410 mm stroke 365 mm dayligth 535 mm ajustment speed 200 mm/sec working feed 1.0 - 10.0 mm/sec return speed 135 mm/sec table width 120 mm table height 1050 mm tiltable up to +/- 10.0 mm Number of working hours ca. 31.800 h compressed air 5.0 - 7.0 bar oil volume 250 l operating pressure 340 bar voltage 400 V total power requirement 23.0 KVA weight of the machine ca. 12950 kg range L-W-H 3660 x 2310 x 2900 mm Machine in a well-maintained condition (!!) with only approx. 31.800 operating hours Lhjdpfx Aexacfmol Ish - in checked condition - machine video - ?v=PBV-MDtZnlE Equipment: - CNC electro-hydraulic press brake - DELEM CNC control model DA 65 * swiveling control panel, front left * 2D graphic programming & product display * Tool & program library * USB keyboard and mouse interface - CNC controlled axes: Y1 + Y2 / X1 + X2 / R1 + R2 / Z1 + Z2 / I axis - CNC controlled back stop (X1 + X2 axis) - CNC controlled height adjustment of the back stop (R1 + R2 axis) - CNC controlled adjustment of the stop fingers (Z1 + Z2 axis) - CNC controlled, pneumatic die displacement (I axis) - CNC WILA electro-motoric table crowning - TRUMPF hydraulic upper tool clamping - TRUMPF manuel Lower tool clamp - 1x freely movable 2-hand / foot control - Safety device at the rear (sliding door) - Safety device at the side (swinging door) - Original operating instructions + spare parts list

Condition: ready for operation (used), Year of construction: 2014, pressure 40.0 t chamfer lenght 1600 mm distance between columns 1100 mm stroke of upper beam 100 mm throat 195 mm working feed 10.0 mm/sec return speed 70.0 mm/sec 180 bar work height max. 840 mm table width 110 mm dayligth 295 mm Control ATS 585 total power requirement 5.5 kW weight 2500 kg range L-W-H 2100 x 1200 x 1800 mm - in checked conditions - machinevideo - ?v=l9CdurfDGb0 Features: - NC-controlled hydraulic press brake - with ATLANTIC NC control "ATS 585" * Rear stop positioning (X-axis) Lodpfx Asy Nd Tyol Ijhh * Depth adjustment positioning (Y1, Y2 axes) * Ability to program various programs * Swiveling control panel, front left * Tool and program library - NC electric-motor-driven material/backgauge (X-axis) * With 2 stop fingers, manually adjustable (R and Z axes) - Tool holder system A - with upper wedge camber - Split insert/bending tools - DSP LASER "RX" safety device - front - 2x side, swiveling safety doors - 1x freely movable double foot control - Operating instructions Also included in the scope of delivery (pre-installed): - 1x brand-new / split set of upper tools * UKB 11,200 mm - 2x 835 mm * Angle 85° - Radius R 0.8 mm - Height 66.5 mm * Load capacity 1000 kN/m max - 1x brand-new / split set of lower tooling * UKB 21.207 - 2x 835 mm * V-openings = 16/22/35/50 mm * Angle 85° * Load capacity 800 kN/m max.

Condition: ready for operation (used), Year of construction: 2002, pressure 200 t chamfer lenght 3100 mm distance between columns 2550 mm stroke of upper beam 200 mm throat 300 mm dayligth 440 mm working feed 9.0 mm/sec return speed 80.0 mm/sec 265 bar Control konv. work height max. 965 mm total power requirement 15.0 kW weight 10500 kg range L-W-H 3360 x 1750 x 2800 mm - in checked conditions - machinevideo - ?v=EcmvsA4AGfo Equipment: - simple / conventional electro-hydraulic press brake - pivoting operation, front left - electric, infinitely variable depth adjustment (Y1 Y2 axis) * Torsion shaft for parallelism - Electro-motorized backgauge (X axis) * with handwheel for fine adjustment * on recirculating ball screws Lsdpfx Aleyu U A Us Ijhh * 2x manually adjustable stop fingers - manual (jog mode) and automatic cycle selector switch - manual table crowning - split set of roe foot upper tools ... H = 210 mm - 1x as good as new universal V-die block, reversible * with anti-corrosion grease * V openings in mm : 12/35/25 50 10/20/16/16 75 * Dimensions of the block in mm : 100 x 100 - 1x 1V die (continuous) - V opening in mm : 100 - various / further bending tools - 1x free-moving 2-hand/foot control - Operating instructions (PDF)

Condition: ready for operation (used), Year of construction: 1998, pressure 120 t chamfer lenght 3050 mm distance between columns 2550 mm stroke of upper beam 155 mm throat 350 mm ajustment speed 100 mm/sec working feed 9.0 mm/sec return speed 77.0 mm/sec Control "P 40" work height max. 878 mm table width 104 mm oil volume 150 l total power requirement 11.0 kW weight 7550 kg range L-W-H 3550 x 2150 x 2600 mm - in checked conditions - machinevideo - ?v=bUaEa_nHZ6E Equipment: - NC electro-hydraulic press brakes - with NEW ELGO NC control unit "P40" * New price approx. 4.000 Euro * Control / movement of the backgauge - X axis (target/actual input) * Control / movement of the depth setting - Y axes (target/actual input) * Inching mode for X axis Y axes also possible - Swivel operation, front left - NC controlled axes : Y1 Y2 X - NC electro-motorized backgauge (X axis) * with 2x manually adjustable stop fingers * including lateral and height adjustment (Z R axis) Lhedpfex Ni Ebox Al Ish - 1x branded set of upper tools (split) - 1x branded Multi-V bottom die block - Lateral safety guard (hinged doors) - Rear safety guard (hinged door) - 1x free-moving 2-hand/foot control - Operating instructions (PDF)

Condition: ready for operation (used), Year of construction: 2007, pressure 30.0 t chamfer lenght 800 mm back stop - adjustable max. 420 mm stroke of upper beam 100 mm dayligth 310 mm working feed 10.0 mm/sec return speed 12.0 mm/sec Control VISION 120 oil volume ca. 38.0 l voltage 380 V total power requirement 4.5 kW weight of the machine ca. 890 kg dimensions of the machine ca. 1250 x 950 x 1900 mm current new price approx. 24.000 euros special price on request - in checked conditions - machinevideo - ?v=SChO00VQgIY Equipment: Lodpfxsyuzcho Al Iehh - electro-hydraulic NC press brake - easy to operate - UNITRONICS "VISION 120" NC control system * for press depth back gauge (Y X axis) - NC electro-motorized back gauge (X axis) * Input of target/actual value possible * 2x manually adjustable stop fingers - Operation front right - Many different insert/bending tools * Top tool holder : AMADA/PROMECAM - 1x freely movable foot switch - EMERGENCY OFF button at the front - Rear safety device - operating instructions

Condition: good (used), Year of construction: 1991, pressure 300 t chamfer lenght 4100 mm distance between columns 3710 mm stroke - stepless adjustable 250 mm Lhjdpfx Asxab I Tel Ijh column arm 330 mm dayligth 500 mm table height 940 mm table width 250 mm working feed 7.0 mm/sec return speed 90.0 mm/sec Control konv. operating pressure max. 305 bar voltage 380 V total power requirement 22.5 kW weight 25200 kg range L-W-H 4320 x 2100 x 3370 mm well-maintained condition (!!) - in checked condition - machine video - ?v=rPOBwTfVReo Equipment: - simple, conventional hydraulic press brake - swiveling control panel, left front - electro-motoric back stop (X axis) * adjustment via front control panel (button) * with analog position display * fine adjustment via handwheel, front - with 3x stop fingers, manually adjustable - electro-motoric depth adjustment (Y1+Y2 axis) * with analog position display - 1x split set of 85° deer foot upper tool - 1x MultiV - universal die block, with several V-openings - 2x front, stable support arms - 1x freely movable double foot switch - 1x freely movable 2-hand control - side safety device (swivelling doors) - rear safety device (sliding door) - original operating instructions

Condition: good (used), Year of construction: 2017, NUMERICALLY CONTROLLED EDGE BANDER WITH PRE-MILLING (SPINDLES) & CORNER ROUNDING UNIT Brand: SCM Model: K 360 HP-T-ER1 Serial No.: AH/120944 Ref: 123304 Year: 2017 WORKING CAPACITIES: - Panel height to be machined: 8 - 58 mm Thickness 10 to 45 mm when using rounding unit - Panel length for edgebanding: 210 to 2500 mm - Minimum panel width to be machined: 90 to 1100 mm - Edge thickness in coil: 0.4 to 3 mm without rounding max 3 mm with rounding unit - Edge thickness in strips: max 6 mm without rounding max 3 mm with rounding unit - Edge width: panel thickness + 2 mm each side - Feed rate: 11 m/min - Minimum gap between panels: 600 mm - Panel overhang beyond the transfer chain: 30 mm MACHINE CONFIGURATION: - StarTouch control - Prepared for barcode reader - Reel holder table Ø800 mm - Front extension table - Easy size: digital positioning of infeed fence and panel passage height - Anti-adhesive spray unit - Pre-milling unit (RT-V trimmer) 12,000 RPM - Infrared panel preheating at infeed - Glue application unit (VC-VM) with interchangeable glue pot for granules, capacity: 1 kg. Heating time: 12 minutes Pneumatic pre-cut guillotine Digitally positioned pressure station with 3 rollers (1 roller powered and with timer) - Trimming unit (end cutting) tiltable 0-20° 12,000 RPM - Top/bottom flush trimming unit with digital positioning and copying system. 2 mm radius (or chamfer) router 12,000 RPM - Corner rounding unit R2 mm, 12,000 RPM, digital positioning - Top/bottom R1 & R2 mm radius scrapers with digital positioning - Top/bottom straight scrapers Lhodpfx Ajrx S Ipol Ish - Edge finishing spray device (Nebulizer) OTHER FEATURES: - Pre-milling group motors: 2x2 kW - End trimming motors: 2x 0.19 kW - Lift/lower motor: 0.30 kW - Feed motor: 1.1 kW - Flush trimming group motors (milling): 2x 0.65 kW - CE Marked - Lockable isolator, emergency stop buttons - Power supply: 380 V, three-phase, 50 Hz - Pneumatic supply: 8-10 bar max, dry air - Extraction: 1x Ø100 mm and 5x Ø80 mm Spindles: 780 m³/h Edge trimming: 360 m³/h Scrapers: 2x360 m³/h Max. footprint in working order: 10.80 x 2.40 m Dimensions for transport (LxWxH): 4.85 x 1.20 x 1.70 m Weight: 1568 kg Machine supplied with mounted tools, manual, spare parts list and diagrams.

Condition: used, Year of construction: 2014, machine/vehicle number: AH /117836, functionality: fully functional, year of last overhaul: 2025, Equipment: documentation/manual, Ideal machine for edge banding of solid wood panels MACHINING CAPABILITIES: - Panel height (thickness) to be machined: 8 to 60 mm - Router pass: max. 90mm², 0 to 3 mm - Minimum panel length to be machined: 140 mm with an edge thickness >3 mm 200 mm with an edge thickness between 3 and 12 mm - Panel width to be machined: up to 2000 mm - Edge thickness: 0.4 to 3 mm in coil form, up to 12 mm in strip form Panel overhang relative to the chain (part protrusion): min. 30 mm - Edge width: recommended overhang: panel thickness + 4 mm - Feed system (2 feed speeds) 18 m/min for thin edges 12 m/min for strip edges (solid wood) - Distance between parts (depending on feed speed): recommended min. 800 mm MACHINE COMPOSITION: - Unwinding table, useful diameter: Ø780 mm - Electric positioning infeed guide - Chain conveyor belt, work surface height from the ground: 96 cm - Front extension table with rollers (serves as a support up to 2 m) - RT-E sanding unit (edge trimmers or routers) 2 x 4 kW, 9000 rpm - VC gluing unit Infrared preheating of the edge Pre-feeder for EVA granules, indicative consumption 8.5 kg/h "Fastblock" glue pot, pneumatic pre-cutting shear Pressing with 4 rollers, including 1 motorized roller, pressure with electric adjustment - K-SEL end trimming unit Rotation speed: 12000 rpm, motor inclination from 0 to 15° - RFK top/bottom flush trimming unit Rotation speed: 12000 rpm - RI 800 chamfering/flush trimming unit with copy pad Rotation speed: 12000 rpm, spindle inclination from 0 to 25° - GLC compact sanding unit, 1400 rpm Belt: 75 x 2700 mm, inclination from 0 to 5°, adjustable pneumatic pressure - SPN polishing station with textile polishing brush - Motorized operator return, useful width 1 m, with 2 roller tracks, spacing 34 cm Air cushion track and belt conveyor. Arrival height from the ground: 79 cm OTHER CHARACTERISTICS: - General power supply: 400 V, three-phase + N + T, 50 Hz - Installed power: IN 52 A nominal - Pneumatic supply: 8 - 10 bars, dry air, working pressure: 6 bars Lhsdpfx Aszcpixsl Ish - Extraction: 6 x Ø50 mm, 1 x Ø80 mm, minimum flow rate 3000 m3/h - CE marking, lockable disconnect switch, emergency stop buttons

Condition: excellent (used), Year of construction: 2000, pressure 105 t chamfer lenght 3100 mm distance between columns 2600 mm table width 100 mm table height 750 mm Control DELEM DA 65 dayligth 200 mm working feed 0 - 10 mm/sec return speed 0-100 mm/sec rapid traverse - up max. 100 mm/sec Lodpfevq R Uuox Al Ijhh voltage 380 V / 50 Hz total power requirement 11 kW weight of the machine ca. 7,5 t dimensions of the machine ca. 4 x 2,2 x 2,8 m Equipment: • CNC-control DELEM DA65 graphic video • controlled backgauge 2 axis • upper and lower tool • 2 hand control / foot switch

Condition: used, Year of construction: 1980, pressure 200 t chamfer lenght 3000 mm distance between columns 2560 mm dayligth 450 mm throat 450 mm adjustment of stroke 240 mm horn length over column outer edge each 175 mm table length 3050 mm table width 280 mm table height over floor 820 mm electrics - voltage/frequency 220/50 V/Hz control CYBELEC, DNC60 stroke 250 mm operating pressure 150 bar weight of the machine ca. 15 t dimensions of the machine ca. L:4,0 x B:3,2 x H:3,44 m • hydraulical press brake, • new control CYBELEC DNC 60 • lower part of the machine moves down 500 mm to the floor, • at the moment the machine is mounted on a double-T-support; • prism and upper part of the machine in 3000 mm length Lsdpfx Alet Hllpo Ishh

Condition: used, Number of boring spindles 7 St. Working width 230 mm Working height 160 mm Weinig Unimat 23 automatic planing and chamfering machine for four-sided planing and profiling of wood, featuring five driven rollers in the table and a universal spindle. Spindle 1: Bottom / 5.5 kW / 40 mm Spindle 2: Right / 5.5 kW / 40 mm Spindle 3: Left / 11 kW / 40 mm Spindle 4: Right / 7.5 kW / 40 mm Spindle 5: Top / 11 kW / 40 mm Lhjdpfxjzf Nr Ro Al Ijh Spindle 6: Bottom / 5.5 kW / 40 mm Spindle 7: Universal / 5.5 kW / 40 mm

Condition: ready for operation (used), Year of construction: 2013, travel distance X-axis: 3,000 mm, travel distance Y-axis: 2,000 mm, number of axes: 4, This 4-axis VOORTMAN VCS Thermo was manufactured in 2013. It features a multi-axis automated chamfering/bevel head and is equipped with a Hypertherm HPR260XD plasma source with Truehole technology. The machine includes an integrated Beckhoff operator console and Beckhoff nesting software. If you are looking to get high-quality plasma cutting capabilities, consider the VOORTMAN VCS Thermo plasma cutting machine we have for sale. Contact us for further details. Lsdpfxszd Abpe Al Ijhh - Cutting Head Setup: Multi-axis automated chamfering/bevel head- Plasma Source: Hypertherm HPR260XD with Truehole technology- CNC Control: Integrated Beckhoff operator console- Software: Beckhoff nesting software including security dongle- Extraction Unit: TEKA Cube filter extraction unit- Filter Condition: Minor defect reported; will be repaired and sold in fully operational condition- Additional Equipment: cutting nozzles and two heads

Condition: new, table length 2400 mm table width 1200 mm table height (lateral area) 200 mm weight 981 kg dimensions of the machine ca. 2400 x 1200 mm SIEGMUND Authorized Dealer - All items in stock! !! SPECIAL OFFER !! SIEGMUND Retro Welding Table 2400x1200x200 mm, accessories included SIEGMUND welding table just like 25 years ago with plasma nitriding and modern table legs Product description Lhjdpfx Alsxflftj Ieh - Table dimensions: 2400x1200x200 mm - High-quality S355J2 steel with plasma nitriding - Material thickness approx. 24.5 - 27 mm - Hole diameter 28 mm - Drill holes in 100x100 mm grid - Corners, edges, and drill holes chamfered at 45° - Side panel height 200 mm - Drill holes in side panels in a diagonal grid - Construction reinforced with ribs Plasma-nitrided version: - Protection against rust / scratches / weld spatter adhesion - Corrosion-resistant / higher load-bearing capacity Specifications: - 28-hole pattern / Dimensions 2400 x 1200 x 200 mm - Plasma-nitrided version - Includes 4x base feet (basic configuration) - Includes accessory set (see Image 3): * 6x 280604 * 12x 280511 * 8x 280420.N * 2x 280110.N * 1x 283999

Year of construction: 1990, condition: used, pressure 1500 kN chamfer lenght 3550 mm distance between columns 3044 mm Lhodpjd Ih S Ujfx Al Ioh Control Cybelec 34 PS-CN column arm 350 mm max. ram stroke 220 mm dimensions of the machine ca. 3200 x 4200 x 2100 m sheet support hinten / back number of support arms 2, verschiebbar / adjust. die shift hydraulical tool clamping upper tool quick change system crown 3 sets of tools included

Condition: used, pressure 50 t chamfer lenght 1500 mm distance between columns 1220 mm Control Cybelec DNC 1200 closing speed 95 mm/min working feed 1-10 mm/sec work stroke 156 mm overrun time 59 ms tracking travel 6 mm throat 200 mm distance table - lower edge of ram 301 mm table width 160 mm table height 850 mm x-axis 550 mm travel R-axis +/- 50 Number of axles 3 (Y, X, R) St. weight ca. 3600 kg a lot of lower and upper tools incl. work light new control in 2003: Cybelec DNC 1200 Lhjdpfxsra Rrho Al Ijh

Condition: used, Year of construction: 2001, pressure 70 -800 kN chamfer lenght 2505 mm distance between columns 2125 mm Ledpfxoyz Dgwe Al Iehh Control OP 2000 controlled axis 7 throat 420 mm stroke 200 mm dayligth 470 mm table width 60 mm table height 960 mm ajustment speed 100 mm/sec working feed 10 mm/sec return speed 100 mm/sec weight of the machine ca. 6,3 t Patented Amada technology ensures absolutely correct bending results without bombing device

Condition: like new (used), Year of construction: 2024, operating hours: 7,556 h, functionality: fully functional, 4 x LIEBHERR LC 280 DC Gear Hobbing Machines For sale are 4 identical LIEBHERR LC 280 DC gear hobbing machines, all manufactured in 2024. Manufacturer: Liebherr Verzahntechnik GmbH Model: LC 280 DC Machine Type: CNC gear hobbing machine with integrated ChamferCut unit Quantity Available: 4 units Year of Manufacture: 2024 Example Machine No.: XXX Control: Siemens CNC / HMI user interface Technical Data: Max. Workpiece Diameter: 280 mm Max. Module: 6 mm / 4 mm depending on the version Axial Travel: 400 mm Shift Travel: 200 mm Max. Hob Diameter: 150 mm Hob Speed: 2,250 / 6,000 rpm Table Speed: 250 / 800 rpm Max. Module ChamferCut: 5 mm Max. Tool Speed ChamferCut: 2,000 rpm Max. Tool Diameter ChamferCut: 130 mm Max. Tool Clamping Length Drilling Tool: 236 mm Max. Tool Clamping Length Shank Tool: 360 mm The LC 280 DC is a compact gear hobbing machine for workpieces up to 280 mm in diameter and integrated ChamferCut machining; according to Liebherr, it is designed for gear hobbing and parallel, defined deburring/chamfering. ([Liebherr][1]) Equipment: Integrated ChamferCut unit Automatic workpiece handling / round magazine Siemens CNC control Liebherr HMI / production interface Workpiece spindle Hobbing head Deburring/chamfering unit Full protection cabin Work area lighting Automation interface Lhsdpfx Aszdv Upsl Ioh CE marking Machine suitable for dry and wet machining, depending on equipment and process Electrical data per machine according to the nameplate: 400 V AC 50 Hz Control voltage: 24 V AC Installed power: 29 kVA Rated current: 42 A cos φ: 0.81 Fuse: 63 A gL Control cabinet weight: 900 kg All 4 machines are identical, manufactured in 2024, and come from modern industrial series production. Technical data according to nameplate, manufacturer's specifications, and photo documentation. Subject to errors and prior sale.

Condition: excellent (used), Year of construction: 2022, Manufacturer: BIESSE Model: AKRON 1440 A Category: Edge banding machine Year of manufacture: 2022 Availability: short notice Operational status: disassembled/stored Technical data Maximum edge banding thickness: 12 mm Maximum panel thickness: 60 mm Maximum thickness of roller material: 3 mm Minimum workpiece length: 140 mm Minimum workpiece width: 50 mm Minimum feed rate: 12 m/min Maximum feed rate: 18 m/min Feed rate: stepless Height adjustment: motorized Belt overpressure Gluing system: granulate Glue reservoir: top Quick-change glue reservoir Suitable for PUR adhesives Strip magazine Spraying device Edge trimming unit Preheating zone Pressure zone, NC-controlled Miter saw unit: 2 motors Edge trimming/radius/chamfer stations: 1 Corner copying unit: 2 motors Pulling blade unit Profile pulling blade, flat pulling blade Smoothing unit Nesting equipment Edge trimming/radius/chamfer stations, profile pulling blade Units controlled by timer NC axis(es) Profile change: automatic Edge trimming/radius/chamfer stations Design: left-hand machine Machine length: 5,610 mm Lhsdpozb Aicjfx Al Ijh Control system: BIESSE SMART TOUCH 23" Conformity marking: CE marking, EAC marking Total connection: 13 kW Weight approx.: 2,250 kg Location: at customer's site - available immediately - As it is disassembled/stored.

Condition: used, functionality: fully functional, Year of construction: 2003, operating hours: 53,000 h, control type: CNC control, controller manufacturer: Siemens, controller model: Sinumerik 840 D, laser type: CO₂ laser, laser power: 3,200 W, punching diameter: 76 mm, sheet thickness steel (max.): 8 mm, Equipment: cooling unit, documentation/manual, dust extraction, emergency stop, quick-change device, safety light barrier, Special equipment: + 2000 on Laser TruFlow 3200 + Blow-out device for small parts + Thread forming function with thread former breakage monitoring + MultiShear function + Slitting function + Marking/Fast chamfering function + Softpunch function + Re-punch cylinder + Vibration-damped mounting + Chip conveyor with tilting container + Additional clamping arm Manufacturer's standard description: Standard equipment: - Hi-Las high-pressure cutting - Laser cutting head with 5'' lens - Laser cutting head with 7.5'' lens - Cutting head quick-change system - Programmable cutting gas selection/pressure setting - Capacitive height control Dias III - Function: ContourLas - Slag cone detection - Compact dust extractor - Tank heater - 18 tool cassettes - 18 die plates - Automatic tool changer with 19 stations - 2 clamping arms - Rotation of all tools - NC-controlled, digital, maintenance-free three-phase drives - Automatic re-punching - Tool length compensation - Fast shutdown of the hydraulics - Automatic shutdown - 2 automatic dividing slides for parts 500 x 500 mm each - Sensors for both dividing slides Lhsdezdc Hmjpfx Al Ioh - 2 scrap bins - Punch scrap extraction - Forming capability - Programmable stamping tool lubrication with 2 containers - Programmable pressure plate - Adaptive stroke length control - Safety devices - Remote diagnostics system - RJ 45 network connection - 3.5'' floppy disk drive - Comprehensive operating manual

Condition: excellent (used), Year of construction: 2003, pressure 60.0 t chamfer lenght 2600 mm distance between columns 2100 mm column arm 200 mm stroke of upper beam 100 mm dayligth 280 mm table height 840 mm working feed 10.0 mm/sec return speed 70.0 mm/sec back stop - adjustable max. 650 mm Control ATS 560 oil volume ca. 150 l voltage 380 V total power requirement 7.5 kW weight of the machine ca. 4700 kg Equipment: - electro-hydraulic NC press brake - easy to operate - HACO NC control model ATS 560 * 7-digit LED display * Memory capacity for 200 programs with a maximum of 400 sets * Working with pressure and immersion depth * Inching function for electric backgauge * Set / actual value input for back gauge * Swiveling control panel, left front - NC controlled axes : Y1 Y2 X axis - NC electro-hydraulic synchronization and immersion depth positioning - NC electro-motorized backgauge Lhsdjzbc Dmepfx Al Ieh * with ball screws * speed 240 mm/sec. * including 2x manually adjustable stop fingers in width and height * backgauge programmable to an accuracy of 0.1 mm - Manual table crowning, with handwheel and analog display - "SYSTEM A" top tool holder, incl. top wedge crowning - "SYSTEM A" bottom tool holder - Various insert/bending tools - 1x freely movable 2-hand/foot control * only moves at working speed - Operating instructions also included in the scope of delivery (built-in): - 1x brand new / split set of upper tools * UKB 11,200 mm - 3x 835 mm * Angle 85° - Radius R 0.8 mm - Height 66.5 mm * Load capacity 1000 kN/m max - 1x brand new / split set of bottom tools * UKB 21.207 - 3x 835 mm * V openings = 16/22/35/50 mm * Angle 85° * Load capacity 800 kN/m max.