Used Chamfer for sale (363)

Condition: new, overall weight: 48,000 kg, maximum load weight: 33,865 kg, axle configuration: 3 axles, Equipment: ABS, You can find our complete range of vehicles, including those available for immediate delivery or on short notice, on our website. Below is an excerpt from the specification. The full equipment list is available upon request. Gooseneck: * Gooseneck with front corners chamfered approx. 45° and a rear bevel approx. 750 mm x 10° * 3 pairs of lashing rings (LC 5,000 daN) * Hardwood flooring approx. 30 mm thick Load area: * Double extendable design with rear bevel approx. 500 mm x 8° * 6 pairs of folding external lashing rings (LC 5,000 daN) * 4 pairs of folding external lashing rings (LC 10,000 daN) * 1 pair of recessed lashing rings at the front of the loading area (LC 10,000 daN) * 1 intermediate table approx. 250 mm * Hardwood flooring approx. 48 mm thick, over axles with checker plate covering * Cut-outs in the external frame of the loading platform for attaching tie-down straps (LC 2,000 daN) Axles: * BPW axles and suspension, all axles forced-steered hydro-mechanically * Design axle load: 12,000 kg each Ibedpfx Aow Tprzeacec * Air suspension with lift and lower valve * Axle tools included Tyres: * 245/70 R 17.5, load index (146/146 F) * Brand of our choice Landing legs: * JOST mechanical landing legs with 2-speed gearbox for approx. 24 t lifting capacity (approx. 50 t test load) Braking system: * Braking system according to EU regulations with EBS-E (2S2M) without connection lines to the tractor unit Paintwork: First-class and durable corrosion protection * High-quality, one-colour 2-component (2K) topcoat in RAL 3002 carmine red * Rear section metallized and coated in RAL 9010 (pure white) Steel Structure: Steel construction from high-strength fine grain steels. * Steel grades: S355J2+N/S355MC (yield strength 355 MPa), S690QL/S700MC (yield strength 690 MPa) Electrical system: * Electrical system according to EU regulations * 24 Volt lighting ASPÖCK-NORDIK (ASS3) * ASPÖCK-UNIBOX at the front connection strip with 24N, 24S & 15-pin sockets, compliant with ISO. 24N ISO-1185 24S ISO-3731 15-pin ISO-12098 Including the following additional equipment: * 2-inch kingpin * Galvanized steel front wall, approx. 400 mm high * Yellow-red air couplings at the galvanized front connection strip * Spare wheel carrier in front of the front wall * Electro-hydraulic unit * Rear and front steering via cable remote control with push-buttons, with single-track monitoring of the axles (without installation in the tractor unit) * Mount at the rear of the gooseneck for aluminum loading ramps * Removable aluminum ramp hanging rail at the rear of the vehicle * Galvanized folding supports beneath the slope of the load area * On the gooseneck: plug-in aluminum side boards and rear board, approx. 2,440 x 400 mm (L x H) * The rear galvanized stanchions are removable (body length approx. 2,560 mm) * One galvanized toolbox, integrated in the chamfered gooseneck * 4 pairs of WADER container pockets in the loading area for one 20', two 20', one 40' or one 45' container * 8 pairs of stanchion pockets (approx. 100 x 50 mm) in the external frame of the loading platform * Galvanized extensions, extendable by approx. 230 mm per side * Adjustable hanging rails for aluminum ramps at the rear of the vehicle * 2 pairs of ferry rings under the gooseneck and 2 pairs at the rear * Central lubrication system with 2 BEKAMAX (Pico) pumps, filled with standard grease NLGI-2 and removable pump guard * 2 LED reversing lights mounted on the rear panel * HRM Metallization (High Resistance Metallisa

Condition: used, Year of construction: 2024, color: grey-black, empty load weight: 1 kg, fuel type: gasoline, gearing type: mechanical, TITLE: NEW HOOK-UP CONTAINER, SQUARE TANK WITHOUT INTERNAL CHAMFERING, REAR OPENING WITH TWO FOLDING DOORS WITH 200 MM BEAMS AND 0.60 MT CIO FLOOR, LARGER WHEELS AND REINFORCEMENT IN THE CENTRAL EXTERNAL PART OF THE CENTERLINE PLUS REINFORCEMENT IN THE FRONT PART AT THE YIELDING POINT REF: 24-N-21 TYPE: for aggregates C NEW: yes LID: no OPENING: rear with two folding doors Ijdpfew Szahox Aacobc OVERALL DIMENSIONS TOTAL EXTERNAL LENGTH: 6.00 m + 0.20 m INTERIOR / EXTERIOR WIDTH OF THE BODY: 2.35 m / 2.55 mt INTERIOR / EXTERIOR FRONT TAILGATE: 1.50 mt / 1.70 mt INTERIOR / EXTERIOR REAR TAILGATE: 1.00 mt / 1.20 INTERIOR / EXTERIOR SIDE TAILGATE: 0.80 mt / 1.00 mt MC: 12 WEIGHT: 2220 BOTTOM: 5 mm WALL: 4 mm COLOR: green ral 6029The prices shown do not include VAT. Please contact the sales representative for an updated comparison of prices and conditions. For more information: Loris: 3484773001 URL: #glispecialistidelloscarrabile SCARRABILI AURORA operates in the sector of the sale and purchase of industrial and commercial vehicles, mainly specialized in the waste sector. Specializing in trucks, trailers and hook-lift equipment. With a fleet of over 50 trucks and over 150 skips, containers with and without hook-lift cranes ready for delivery. S.E.&O Given the quantity of ads and details entered, Aurora invites you to verify the correctness of the data entered with the sales staff.

Year of construction: 2005, condition: excellent (used), chamfers PVC edges and others pneumatic pressure power supply 380V perfect condition Iedpfeidmvnox Aacjbc

Condition: ready for operation (used), Year of construction: 2008, functionality: fully functional, machine/vehicle number: T/41242, workpiece height (max.): 52 mm, edge thickness (max.): 12 mm, working height: 880 mm, empty load weight: 3,000 kg, throughput speed: 233 mm/s, No reserve price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Operation: Single-sided, right-hand version Edge thickness: 0.2 – 12 mm Workpiece dimensions Minimum width: 70 mm Minimum height: 8 mm Maximum height: 52 mm Minimum length: 150 mm Feed speed: 10 – 14 m/min Working height: 880 mm MACHINE DETAILS Processing units Jointing unit with 2 high-frequency motors, 1.5 kW Double end trimming unit with 2 high-frequency motors, 0.3 kW Flush trimming unit with 2 high-frequency motors, 0.7 kW Fine trimming CHAMFERING unit with 2 high-frequency motors, 0.3 kW Ibodpfx Aexa Acreacjc Fine trimming RADIUS unit with 2 high-frequency motors, 0.3 kW Corner rounding unit with 2 motors, 0.35 kW Scraper unit for plastic edges Dimensions & Weight Machine dimensions (L x W x H): 6,120 x 840 x 1,385 mm Machine weight: 3,000 kg Operating voltage: 400 V, 50 Hz Total connected load: 12 kW Electrical connection: 3 x 400 V, 5 x 6 mm², fuse 35 A EQUIPMENT Double roller top pressure with electronic positioning Automatic roll magazine for coils up to 800 mm diameter, with pneumatic guillotine for edge thickness up to 3 mm Automatic edge magazine with optical monitoring for strip edges in fixed lengths Infeed fence with automatic positioning when inputting the jointing value CM - CombiMelt adhesive application system in modular design Control system via 7-inch TFT color touchscreen display 100 work programs freely and alphanumerically programmable PLC for high-resolution feed control Individual frequency inverters for independent activation of processing motors Hole recognition to suppress CNC operations Network capability for integration into a data network

Condition: good (used), Year of construction: 2001, functionality: fully functional, On offer: A used edge banding machine Manufacturer: Brandt (Optimat series, later Homag Group) Type: KD 68 CF Machine type: Edge banding machine Year of manufacture: 2001 Weight: approx. 2,000 kg Workpiece data: Workpiece thickness: up to approx. 50 mm Minimum workpiece width: approx. 60 mm Minimum workpiece length: approx. 160 mm Edge thickness: 0.4 – 3 mm (PVC/ABS/coil material) Strip/solid wood edges: up to approx. 9 mm possible Iodpfxexb E D Is Aacebc Feed speed: approx. 12 – 18 m/min (adjustable, model dependent) Units and equipment: Pre-milling unit for edge processing prior to glue application Glue application station with hot-melt adhesive tank Guillotine for edge material up to 3 mm Pressure station with 3 rollers Milling units (radius/chamfer) Corner rounding unit Scraper unit for removing glue residue Polishing unit for finished edges Electrical data: Total connected load approx. 10 – 12 kW Extraction ports: multiple connections Ø 120 mm Voltage: 400 V / 50 Hz / 3 phases

Condition: used, Year of construction: 2014, Used machine Used edge banding machine of the company Format 4 type Perfect 710 E - Motion Year of construction: 2014 MNo.: 200.02.011.14 Technical data: Ibsdpfsw Nadtex Aacjc Control unit with 10.4" touch color screen Extendable workpiece support motorized - position-controlled pressure beam chain feed with 12m/min feed speed Roller support plate with ball bearings d = 770 mm 2 motorized joint milling unit / 2 x 1.1 kW Edge feed for roll and strip material 0.4 - 10 mm (edge detection via infrared sensor) Teflon-coated gluing unit Pre-melting unit for EVA glue Replacement gluing unit for EVA Replacement gluing unit for PU motorized positioning-controlled pressing unit 2 motorized cross-cut saw unit / 2 x 0.50 kW 2 motorized multifunctional units for radius, flush and chamfer trimming / 2 x 0.75 kW Corner processing unit Radius scraper Surface scraper 2 motorized polishing unit (buffing wheel) Spraying unit for release agent on the machine infeed side Spraying unit for cleaning agent in front of the polishing unit Availability:short term Location: Flörsheim

Condition: new, overall weight: 48,000 kg, maximum load weight: 37,710 kg, axle configuration: 3 axles, total width: 2,540 mm, Equipment: ABS, You can find our complete vehicle inventory, including immediately and shortly available vehicles, on our website. Excerpts from the equipment list. Full equipment details are available upon request. Gooseneck: - Gooseneck with chamfered front corners approx. 45° and rear chamfer approx. 750 mm x 10° - 3 pairs of lashing rings (LC 5,000 daN) - Hardwood floor approx. 30 mm thick Loading Platform: - Telescopic loading platform with rear slope approx. 1,000 mm x 8° - Between the 1st and 2nd axle, a pair of fixed wheel recesses, approx. 1,610 x 970 x 400 mm (L x W x D) - Including 3-piece removable galvanized covers over the wheel recesses (W = approx. 670 mm - max. point load 5 t/each) - 1 pair of recessed lashing rings at the front of the loading platform (LC 10,000 daN) - 4 pairs of fold-out lashing rings to the outside (LC 5,000 daN) - 3 pairs of fold-out lashing rings to the outside (LC 10,000 daN) - Cutouts in the outer frame of the loading platform for hooking in tie-down straps (LC 2,000 daN) Axles: - BPW axles and suspension, 2 rigid axles, 3rd axle steering axle - Technical axle load: 12,000 kg each - Electromagnetic reverse lock, activated via reverse gear and manually - Air suspension with lift and lower valve. Axle tools Tyres: - Tyres 235/75 R 17.5 3PMSF – brand of our choice Landing Gear: - JOST mechanical landing legs with 2-speed gearbox for approx. 24 t lifting capacity (approx. 50 t test load) Brake System: - Wabco brake system according to EU regulations with EBS-E (2S2M) without connection lines to the tractor unit Steel Structure: - Steel structure made of high-strength fine-grained steels - Steel grades: S355J2+N/S355MC (yield strength 355MPa), S690QL/S700MC (yield strength 690MPa) Isdpfx Aew Tpq Rjacobc Electrical System: - Electrical system according to EU regulations - 24 Volt ASPÖCK-NORDIK lighting (ASS3) - ASPÖCK-UNIBOX at the front connection strip with 24N, 24S, and 15-pin sockets in accordance with ISO: 24N ISO-1185, 24S ISO-3731, 15-pin ISO-12098 Paintwork: - Top-quality and durable corrosion protection of the standard shot-blasted welded frame ensured by a 2-component (2K) zinc dust primer - High-quality 2-component (2K) top coat, single color in RAL 3002 carmine red - Rear section metallized and painted in RAL 9010 (pure white) Accessories Included: - 2" kingpin - Galvanized steel front wall, approx. 400 mm high - Spare wheel bracket in front of the front wall - On the galvanized front connection strip, yellow-red air couplings - 4 wheel chocks with holder on the front wall - Mounting for aluminum loading ramps at the rear of the gooseneck - Galvanized folding supports under the rear slope of the loading platform - Bracket for warning beacon at the rear of the trailer - TPMS tire pressure monitoring system in accordance with ECE R 141 - Yellow reflector tape according to EU regulations on the sides, extension, and rear of the trailer - On the gooseneck and rear panel left and right, holder for warning signs each including socket - 1 hardwood bumper on the rear wall from gooseneck to loading platform - Galvanized holder for extension planks left and right under the loading platform - 4 pairs of recessed lashing rings along the central beam (LC 5,000 daN) - 1 pair of recessed lashing rings along the rear central beam (LC 10,000 daN) - On the gooseneck, plug-in aluminum side and rear boards, approx. 2,440 x 400 mm (L x H) - The rear galvanized plug-in stanchions are removable (length of the body approx. 2,560 mm) - A tool

Condition: used, Year of construction: 1982, pressure 100 t chamfer lenght . mm Ibsdeq Dta Sepfx Aacjc distance between columns . mm total power requirement . kW weight of the machine ca. 8 t dimensions of the machine ca. . m

Condition: like new (used), Year of construction: 2023, Edgebanding Machine SCM Model: olympic 500 HP 'T-ER2' Offer type: LEASE RETURN, Used machine Availability: Immediately Location: Austria Condition: Like new Year of manufacture: 2023 GENERAL DESCRIPTION: A complete and versatile edgebander for small and medium-sized enterprises, capable of processing a wide range of materials to high quality standards in a compact footprint. The SCM Olympic 500 features electronic adjustment devices and allows for the processing of 2 radii, each with its own tooling, for workpieces with a minimum width of 60 mm. HIGHLIGHTS: • Large touchscreen control panel with “Maestro active edge” software for the human-machine interface (HMI) • Maestro connect: Prepared for later installation without gateway • Dual-radius processing, beveling on all units with multi-blade tooling: - Fine-trimming and radius scraper unit, radius = 1 mm - Fine-trimming and radius scraper unit, radius = 2 mm • Electronically positioned pressure beam OPTIONAL EQUIPMENT: Isdpfx Asq A Tyzsacjbc Workpiece spacer at infeed KIT “SAV€NERGY” Cabin and edgebanding area internal lighting “Nesting” tracing roller kit Release agent spray unit “AAR” Edge finishing spray unit Spray unit for sensitive edges Jointing milling unit “RT-V1” “EASY SIZE” device – electronic quick adjustment for jointing milling unit Glue pot “VC-VM” Ceramic infrared lamp for workpiece preheating Electronic positioning of all pressure rollers End trimming unit “K-2 Radius” Chamfer and radius milling unit “R-HP Multiedge 2R” Corner rounding unit “Round 2-A Multiedge 1R” KIT 'MULTIEDGE 3’ – automatic changeover between straight/radius/radius positions for “Round 2-A Multiedge 1R” unit Radius scraper unit “RAS-HP Multiedge 2R” Flat scraper unit “RC-N” Buffing unit “SP-V” MACHINE LANGUAGE: German TECHNICAL DATA: Edge thickness: 0.4–6 mm Workpiece thickness: 8–60 mm Min. workpiece width: 60 mm Feed speed: 12 m/min Machine length: approx. 4950 mm SPECIAL PRICE FOR LEASE RETURN!!

Condition: excellent (used), Year of construction: 2019, Edge sander for MDF fronts, manufacturer STYL24, model SKI1 Iodsxmh S Espfx Aacsbc The machine includes: sanding belt section, sanding shoe, edge milling unit, section for sanding J profile, unit for chamfering the bottom edge, and a material blow-off section. The machine is ready for operation.

Condition: used, pressure 200 t chamfer lenght 3100 mm distance between columns 2750 mm stroke 400 mm throat 300 mm Iodpev S Irmjfx Aacsbc oil volume 330 l total power requirement 18,5 kW weight of the machine ca. 18500 kg dimensions of the machine ca. 4300 x 2400 x 3600 mm

Condition: ready for operation (used), Year of construction: 1992, functionality: fully functional, machine/vehicle number: 237, mobile, motor 11.5 kW, gluing from 0.5 to 5mm, adjustable folding blade, rapid heating basin, HF cross-cut saw unit, HF flush trimming unit, HF chamfer or radius trimming unit, extendable workpiece roller support, central suction, chassis, length approx. 3,350mm x depth 950mm, Isdou Egv Ujpfx Aacsbc

Condition: new, overall weight: 48,000 kg, maximum load weight: 38,140 kg, axle configuration: 3 axles, total width: 2,540 mm, Equipment: ABS, You can find our complete vehicle inventory, including vehicles available immediately and at short notice, on our website. Excerpt from equipment. Full equipment details available on request. Gooseneck: - Gooseneck with front corners chamfered approx. 45° and rear bevel approx. 750 mm x 10° - 3 pairs of lashing rings (LC 5,000 daN) - Hardwood flooring, approx. 30 mm thick Loading area: - Telescopic loading area with rear incline approx. 1,000 mm x 8° - Between 1st and 2nd axle: one pair of fixed wheel recesses, approx. 1,610 x 970 x 400 mm (L x W x D) - Incl. 3-piece removable galvanized cover over wheel recesses (width approx. 670 mm – max. point load 5 t / pc.) - 1 pair of flat lashing rings at the front of the loading area (LC 10,000 daN) - 4 pairs of outward folding lashing rings (LC 5,000 daN) - 3 pairs of outward folding lashing rings (LC 10,000 daN) - Cutouts in the outer frame for attaching tie-down straps (LC 2,000 daN) Landing legs: - JOST landing legs (manual) with 2-speed gearbox for 24 t lifting capacity (50 t test load) Tyres: - Tyres 235/75 R17.5 3PMSF, make at our discretion - TPMS tyre pressure monitoring system in accordance with ECE R 141 - Data transfer to the towing vehicle via standardised EBS interface as per ISO 11992 Ijdpfjw Tpq Dsx Aacebc - For correct display, the towing vehicle must be able to receive and display this data Axles: - BPW axles and suspension, 2 axles rigid, 3rd axle self-steering - Technical axle load: 12,000 kg - Electromagnetic reverse lockout activated automatically when reversing and manually - Air suspension with lifting and lowering valve. Axle tools Braking system: - WABCO braking system according to EU regulations with EBS-E (2S2M) without piping to the tractor unit Electrical system: - Electrical system per EU regulations - LED lighting 24 Volt ASPÖCK-NORDIK (ASS3) - All LED side marker lights flash with the indicator - ASPÖCK-UNIBOX at front connection strip with 24N, 24S & 15-pin sockets, according to ISO; 24N ISO-1185, 24S ISO-3731, 15-pin ISO-12098 Steel construction: - Steel structure made of high-strength fine-grained steels - Steel qualities: S355J2+N/S355MC (yield strength 355 MPa), S690QL/S700MC (yield strength 690 MPa) Paintwork: - Complete steel structure automatically shot-blasted after welding in a wheel-blasting system - Second shot-blasting with corundum for optimum coating adhesion - HRM metallization of entire chassis with ZINACOR 850 (85% zinc/15% aluminium) for maximum corrosion protection - Final painting with 2 layers of 2K topcoat, single-colour in RAL 3002 Carmine Red, rear section metallized and painted in RAL 9010 Pure White - Metallic finish not available - Paint structure tested in salt spray test according to ISO 9227-NSS - Internal cavities sealed with special wax Including the following accessories: - On the gooseneck and rear, left and right, one holder for warning signs each, including socket - Spare wheel holder in front of the front wall (without spare wheel) - 2-inch king pin - Galvanized steel front wall, approx. 400 mm high - Yellow-red air couplings on the galvanized front connection bar - Galvanized folding supports under the inclination at the rear of the loading area - A hardwood crash protection strip at the rear wall from gooseneck to the loading area - 1 pair of recessed lashing rings along the central beam at the rear inclination (LC 10,000 daN) - Aluminium drop sides and tailgate on the gooseneck

Condition: as good as new (ex-display), Edge and contour milling machine Make: Assfalg Model: KKE 1 Condition: Demonstration machine Ibjdew Rl Rzepfx Aacec Speed: 8,000 - 24,000 rpm (stepless) Max. chamfer width: 3 mm Standard equipment includes: - Guide ruler - Socket wrench, open-end wrench - Work ring Ø 30 x 8 mm - Collet Ø 6 mm with union nut - Operating manual

Condition: used, Welding edge shaper, edge shaper, edge chamfering machine TRUMPF Chamfering of steel plates for weld seam preparation Ibsdpfxsdz Sq Ee Aacjc Type TKF 103 Sheet thickness: 4 - 25 mm Bevel length max: 10 mm Bevel angle: 30° Power: 2000 watts Mains connection: 220 Volt, 50 Hz - equipped with guide bracket for 30° bevel angle - resharpenable steel for high tool utilization - Set up for 20 mm sheet metal For chamfering straight and curved edges with a radius of at least 40 mm. For chamfering edges on flat and curved workpieces as well as pipes with an internal diameter of at least 80 mm. Weight: 14 kg

Condition: good (used), Year of construction: 2014, Overall dimensions: 12.4 x 18.8 m incl. safety fencing Number of baskets per oven: 2x 1,170 x 1,150 x 2,000 mm Reference load weight (net/gross): 1,285 / 2,185 kg Max. load weight (net/gross): 2,000 / 2,700 kg Load: 2,050 x 1,150 x 2,800 mm, external dimensions: 2,950 x 6,400 x 7,800 mm Max. temperature: 600 °C Operating temperature: 510 °C Total heating capacity: 2 x 81 kW = 162 kW electric Quenching water bath: Type = QT-24.16.57/71E Temperature bath max.: 70°C, chamfering volume = 20 m^3 Ibsdpfx Aaew R Sypscjc 2 ageing furnaces: Type = ADBF-24.16.30/250E External dimensions: 2,800 x 4,850 x 4,000 mm Oven temperature max.: 250°C Operating temperature: 180 °C Total output: 2x 40.5 kW = 81 kW Electrical storage/retrieval section, Gea cooling coil, protective housing, safety equipment, system control 1,056 annealing baskets with stanchion pallets System already dismantled, packed and stored

Condition: used, pressure 125 t chamfer lenght 3550 mm distance between columns 3050 mm stroke 250 mm table width 120 mm table height 900 mm column arm 320 mm return speed 100 mm/sec working feed 10 mm/sec control Cybelec DNC 70 quantity of oil ca. 250 l total power requirement 11 kW weight of the machine ca. 11 t dimensions of the machine ca. 4 x 2 x 3 m * new control Cybelec CypTouch 12 - 3 axes * Hydraulic tool clamp * Crowning * Swivel control, right front * free-moving foot control * lateral protective device (protective grille) * rear protective device (protective grille) Machine is available in about 1-2 months !! Ibsdpfxokpwubs Aacsc

Condition: used, Holz Her Auriga 1308 FÜ + PU Compact design – edge thickness 0.4 - 6 mm SPS screen control Edge-Control PPC 221 color display Pre-milling unit for jointing before the glue application station Fully automatic edge magazine for coil and strip material Gluing station GLU-JET for EVA and PUR adhesives, cartridge or granulate + PU Adhesive application via nozzle technology Workpiece height 6-65 mm automatic glue height adjustment Pressure unit 1912-3 pneumatic End trimming unit 1918 pneumatic for coil and strip material up to 8 mm edge thickness With pneumatic adjustment from 0-10° tilting of the saws Milling unit 1827 MOT 4, flush trimming 8 mm, radius milling – chamfer milling – 15° 1827 MOT NC axes via control panel Corner rounding unit 1832 SPS, rounding of corners up to 3 mm edge thickness in through-feed Scraper unit for chamfer and radius with 2 scraper holders - MOT Iodpfxsxbf Sxj Aacobc Flat scraper unit – finish Spray device – PU Complete DIA tool kit included Machine is FACTORY-REFURBISHED in TOP CONDITION Available ex stock Lieboch

Condition: new, overall weight: 48,000 kg, maximum load weight: 37,820 kg, axle configuration: 3 axles, total width: 2,540 mm, Equipment: ABS, You can find our complete vehicle inventory with immediately and soon-available vehicles on our website. Excerpt from the equipment features. Full equipment list available on request. Gooseneck: - Gooseneck with chamfered front corners approx. 45° and with rear bevel approx. 750 mm x 10° - 3 pairs of lashing rings (LC 5,000 daN) - Hardwood flooring approx. 30 mm thick Loading area: - 1 pair of fixed wheel recesses in front of the axles, approx. 2,610 x 970 x 400 mm (L x W x D) - Wheel recesses with 15 x 15 mm square climbing strips and lower area widenings - Between the 1st and 2nd axle one pair of fixed wheel recesses, approx. 1,610 x 700 x 400 mm (L x W x D) - Incl. 3-piece removable galvanized covers for wheel recesses (W approx. 670 mm) – max. point load approx. 5 t/each - Lowering in the chamfer and extending into the loading area for excavator bucket stick accommodation (approx. 2,900 x 750 x 210/290 mm [L x W x H]) - 1 pair of horizontal lashing rings at front of loading area (LC 10,000 daN) - 5 pairs of fold-out lashing rings (LC 5,000 daN) - 3 pairs of fold-out lashing rings (LC 10,000 daN) - 2 pairs of lashing rings in the excavator stick recess (LC 5,000 daN) - Cut-outs in the outer frame of the loading area for attaching tie-down straps (LC 2,000 daN) One-piece steel ramps: - One pair of galvanized, one-piece steel ramps, approx. 3,000 x 800 mm, with approx. 48 mm thick hardwood surface - Ramps with hydraulic lifting mechanism, hydraulically movable - Maximum load per pair: 40,000 kg - In accordance with Regulation 1230/2012/EU, ramps less than 300 mm in length do not need to be considered part of the vehicle length in driving position Landing legs: - JOST landing legs (mechanical) with 2-speed gearbox, load capacity approx. 24 t (test load approx. 50 t) Isdpfsw Tpqwex Aacjbc Axles: - BPW axles and suspension, 2 rigid axles, 1 self-steering axle - Technical axle load: 12,000 kg each - Electromagnetic reverse lock, activated via reverse gear and manually - Air suspension with lift and lowering valve - Axle tool Tyres: - Tyres 235/75 R 17.5 3PMSF – brand at our discretion - TPMS tyre pressure monitoring system according to ECE R 141. Data transmission to the tractor unit via the standardized EBS interface according to ISO 11992. For correct display, the tractor unit must be capable of transmitting and displaying this data Braking system: - WABCO braking system compliant with EU regulations with EBS-E (2S2M), without connecting lines to the tractor unit Steel structure: - Steel construction made from high-strength fine-grained steels - Steel grades: S355J2+N/S355MC (yield strength 355 MPa), S690QL/S700MC (yield strength 690 MPa) Electrical system: - Electrical system in accordance with EU regulations - Lighting 24 Volt ASPÖCK-NORDIK (ASS3) - All LED side marker lamps flash with the turn signal - ASPÖCK-UNIBOX at the front connection bar with 24N, 24S & 15-pin sockets according to ISO (24N ISO-1185, 24S ISO-3731, 15-pin ISO-12098) Paintwork: - Complete steel construction is automatically shot-blasted after welding using a blast wheel system - Second blasting with corundum for optimum coating adhesion - HRM metallization of the entire vehicle chassis with ZINACOR 850 (85% zinc / 15% aluminum) for optimum corrosion protection - Final coating with 2 layers of two-component topcoat, single color in RAL 3002 Carmine Red, according to RAL System 841GL - Rims in silver - Rear section metallized and in RAL 901

Condition: new, Year of construction: 2023, functionality: fully functional, machine/vehicle number: 10006565, Weinig Powermat 1500 Working width 30 - 310mm (with tool flight circle 93-125mm) Working height 100 - 200mm (with tool flight circle 93-125m) Number of spindles 6 Spindles bottom 2 Spindles right 1 Spindles left 1 Spindles top 2 Spindle arrangement u-r-l-o-o-u Spindle speed max 8,000 rpm Spindle diameter 40 mm Ibedpforq Ebfsx Aacoc Powerlock tool holder incl. chamfering unit Separate motor for each spindle Electronic feed incl. brake, infinitely variable 5-40 m/min. Durofer pointed tooth rollers Short infeed table 1.2 m long with 2 driven rollers above the table Hard-coated machine table surface Manual lubricant pump WEINIG Comfort Set Control system WEINIG MEMORY PLUS-SYSTEM CE mark Declaration of Conformity

Condition: used, Year of construction: 2006, functionality: fully functional, Equipment: CE marking, Alternating-cycle nailing line consisting of: IHM alternating-cycle nailer 3-meter transfer unit 6-mark marker Corner cutter module Ibsdoxdi N Tspfx Aacec Chamfering module Skinning module Turning module Pallet stacker 5-meter transfer unit

Condition: excellent (used), Year of construction: 2013, functionality: fully functional, FELDER G330 Edge Bander Used edge bander, post-service inspection. - Machine in excellent technical condition. - Year of manufacture: 2013. - One-owner machine. - Recently serviced. EQUIPMENT: Electrical equipment: - Supply voltage: 3x 400 V - Power frequency: 50 Hz Workpiece dimensions: - Edge thickness: 0.4 – 3.0 mm - Workpiece thickness: 10 – 45 mm - Minimum workpiece width: 70 mm - Minimum workpiece length: 210 mm Units: - Edge feeding from coil via feed plate - Edge feeding for thicknesses 0.4–3 mm, manual feed for individual edging strips - Guillotine shear for trimming coil edges up to 3 mm thick - Gluing unit for hot-melt granulate adhesive, Teflon-coated glue pot - Spring-loaded pressure unit, 1 straight pressure roller and 1 pressing roller - Saw trimming unit: 9,000 rpm, 0.18 kW, HW saw blades Z=16, Ø 80 mm - Multifunctional milling unit: 12,000 rpm, 0.22 kW, for rounding, straight milling, and chamfering - Mechanically-activated corner scraper unit for R=2 mm - Mechanically-activated flat scraper unit Operation: - Control panel with LCD display and keypad - Quick, tool-free unit adjustment system Feed: - Workpiece feed with chain-type conveyor - Feed speed: 8 m/min - Extendable support Iodpfx Aexly I Aeacjbc General data: - Extraction port Ø 120 mm Overall dimensions: - Length: 2,000 mm - Width: 800 mm - Height: 1,500 mm - Weight: 360 kg Machine financing available via leasing or installments. Just visit our website: jbsmaszyny.pl We invite you to test the machine. Where to see our machines? JBS WOODWORKING MACHINERY WOLICA DRUGA 26 23-310 MODLIBORZYCE, Poland Nationwide machine transport! Phone: 663 495 647 (German) Phone: 664 335 475 (English) Phone: 530 632 386 (English)

Condition: used, pressure 200 t chamfer lenght 4050 mm distance between columns 3650 mm table width 190 mm stroke 250 mm throat 315 mm rapid traverse 100 mm/s working feed 8 mm/sec return speed 75 mm/sec Ibedpetv Rg Sefx Aacoc table height over floor 800 mm tank capacity 240 l total power requirement 18,5 kW weight of the machine ca. 17 t dimensions of the machine ca. 4,4 x 1,8 x 3,0 m *Press brake with 3 axes and new control CNC CYBELEC CybTouch 12* maximum tool width 100 mm Current consumption 25 A Power fuse 50 A manual crowning

Condition: new, overall weight: 45,000 kg, maximum load weight: 35,060 kg, axle configuration: 3 axles, loading space length: 9,500 mm, total width: 2,540 mm, Equipment: ABS, You can find our complete vehicle inventory, including vehicles available immediately and at short notice, on our website. Excerpt from the equipment features. Complete specifications available on request. GOOSENECK * Gooseneck designed as a loading platform with aluminum checker plate covering * Hydraulic lifting rocker, approx. -280/+250 mm, can be raised and lowered * Two kingpin positions at approx. 2,300 mm and approx. 2,000 mm * For tractor units: 4x2, 6x2, or 6x4 * 2-inch kingpin * 3 pairs of recessed lashing rings on the gooseneck (LC 6,300 daN) * ASPÖCK UNIBOX on the front connection panel with 24N, 24S, and 15-pin sockets; 24N connection according to ISO 1185, 24S connection according to ISO 3731 * 15-pin connection according to ISO 12098 * Yellow-red air couplings on the front connection panel * Lighting for operation of the gooseneck, suspension, and hydraulic bracing with on/off switch * Boom for suspending supply lines on the front of the gooseneck * All work lights in the gooseneck area operated via on/off switch on the gooseneck LOADING AREA * Loading well, approx. 9,500 mm long, with angle profiles mounted underneath for loading pallet support (distance from kingpin to axle center approx. 8,000 mm) * BPW stub axles with drum brakes and independent suspension, hydraulic axle compensation with lifting and lowering function * Tires: 385/65 R 22.5 (M+S) * Mechanical drop-leg supports for approx. 48,000 kg support load * Access ladder mounted front right, with 2 removable handrails * Detachable full coverings on both sides in front of the axle assembly * WABCO Roll Stability Support (RSS) * 9 pairs of lashing rings (LC 6,300 daN) on the longitudinal beams Isdjwx Dc Hepfx Aacjbc * Grating support on the longitudinal beams, flush with integrated load securing guide rails * First and last axle manually liftable (left and right) * Storage boxes behind the axle assembly on left and right, splash-water protected * Rear chamfer for easier insertion of pallets * Lashing eyes at the end traverse for mechanical bracing * Rear door with cross-bracing, hinged on the left and hydraulically locked on the right, can be secured horizontally at 90°, 105°, and 270° * Underride guard foldable upwards for transporting up to 4 empty standard pallets * Number plate holder with lighting on the rear door * A 7-pin socket on the end traverse * Electro-hydraulic unit for operating hydraulic functions (without installation in the tractor unit) * TPMS tire pressure monitoring sensors installed on all wheels, including spare wheels * Control lights indicating nominal ride height in the vehicle control area * 1 odometer mounted on the left * 2 axle load gauges with axle load diagram mounted on the left * 2 rubber buffers at the front of the loading channel as stops for the pallet * Hydraulic preparation including controls for mounting 4 pairs of our hydraulic load securing systems * 1 spare wheel holder on the right (in the direction of travel) * EU reflector at the rear of the vehicle * Acoustic reversing warning signal * Round NATO socket on the front connection panel (Maeler & Kaege VG 96 917) BRAKE SYSTEM: * WABCO EBS brake system in accordance with EU regulations. WITHOUT connecting cable to tractor unit LIGHTING SYSTEM: * 24-volt lighting system in ASPÖCK-NORDIK full LED version, compliant with EU regulations (ASS 3) SURFACE TREATMENT HRM metallization

Condition: used, Year of construction: 1973, pressure 110 t Iedpfxew A An Nj Aacobc chamfer lenght 3100 mm distance between columns 2600 mm stroke 150 mm dayligth 350 mm work height max. 900 mm total power requirement 22 kW weight of the machine ca. 7700 kg dimensions of the machine ca. 3550 x 1800 x 2600 mm