Used Chamfer for sale (362)

Condition: used, overall weight: 58,000 kg, maximum load weight: 45,830 kg, axle configuration: > 3 axles, first registration: 06/2024, next inspection (TÜV): 07/2026, Year of construction: 2024, Equipment: ABS, You can find our complete inventory of immediately and soon available vehicles on our website. Below is a selection of features. Complete specifications available upon request. Gooseneck * Designed in SNT format to optimize loading platform length * Length approx. 4,100 mm, front with chamfered corners approx. 400 x 400 mm * Rear chamfer approx. 1,000 mm x 10° * Steel front wall, removable, approx. 400 mm high * Plug-in aluminum rear wall on the gooseneck, approx. 400 mm high, anodized finish * 2 pairs of lashing rings (LC 16,000 daN) integrated inside on the outer beams of the gooseneck, rotated approx. 45° * 1 pair of lashing rings (LC 10,000 daN) integrated inside at the front of the gooseneck outer beams, rotated approx. 45° * 2 pairs of stake pockets integrated in the gooseneck, for plug-in stakes approx. 100 x 50 mm Itedpexc Ax Eofx Aacen * 2 additional pairs of bolt-on lashing rings (LC 5,000 daN) * 2 pairs of lashing rings with retaining spring, suspended on the outer beams of the gooseneck (LC 5,000 daN) * 1 pair of plug-in aluminum side boards on the gooseneck, approx. 1,200 mm long, approx. 400 mm high, anodized finish * 3.5-inch kingpin Loading Platform * Telescopable loading platform, length approx. 9,300 mm, with rear chamfer approx. 500 mm x 10° * Recess in the chamfer and extending into the platform for excavator stick approx. 2,490 x 750 x 210/290 mm (L x W x H) * Continuous hardwood flooring approx. 50 mm thick on the platform and interrupted between axles (increases friction coefficient) * Platform locked with conically welded locking profiles every approx. 250 mm * Including pre-tension plate * 1 pair of recessed horizontal lashing rings in the fixed front part of the platform (LC 10,000 daN) * 9 pairs of recessed lashing rings in the outer frame of the platform, foldable outward (LC 10,000 daN) * 5 pairs of stake pockets integrated in the outer frame of the platform, for plug-in stakes approx. 100 x 50 mm * 1 crosswise stake pocket rail mounted in the fixed support of the platform, for plug-in stakes approx. 100 x 50 mm * Wheel wells with square climbing strips approx. 15 x 15 mm * Wheel wells in front of the axles continuously open up to the cross member of the gooseneck, approx. 1,310 x 700 x 410 mm (L x W x D) * Wheel wells between the 2nd and 3rd axle approx. 1,310 x 700 x 250 mm (L x W x D) * Aluminum covers for the wheel wells, which can also be used as bridge elements for the extension OR as widening planks * In front of and behind the rear wheel well, 1 pair of horizontal lashing rings each (LC 10,000 daN) in the outer frame of the platform * WADER container pockets in the platform and gooseneck for transporting 2x 20' containers * 1x over gooseneck with long goods rack * 1x in the platform * Extension (galvanized) extendable by approx. 230 mm per side * Loose widening planks, steel reinforced * 4 pairs of plug-in WADER container locks * Long goods rack in the lowbed, level with gooseneck, required for transporting 2x 20' containers * 1 pair of aluminum loading ramps VFR 120, approx. 2,400 x 620 x 120 mm (L x W x H) Chassis * BPW axles and suspension * 1st and 2nd axle rigid * 3rd and 4th axle friction-steered with electromagnetically activated reverse lock via reverse gear and manual activation * Air suspension with lift and lower valve * Tires: 235/75 R 17.5 3PMSF dual tires * 1st axle with automatic lift axle function Braking System WABCO EBS-E according to EU regulations Landing Legs * Me

Condition: new, SCM Olimpic 500 HT - Automatic Edge Banding Machine New machine with warranty. - Olimpic 500 - "HP T-ER2" version - "eye-S" control panel - "Maestro active edge" human-machine interface (HMI) software - Fine milling and radius scraping unit, radius = 1 mm - Fine milling and radius scraping unit, radius = 2 mm - Electronic positioning of the upper pressure beam - Spacer on the infeed guide - "SAVENERGY" kit Iedpswkf Ihjfx Aacjtn - Interior lighting of the booth and gluing area - Nesting rollers - Release agent spray unit "AAR" 1 - Sprayer for finishing the edge - Sprayer for delicate edges - "RT-V1" jointing unit - "EASY SIZE" device - "VC-VM" gluing unit - Ceramic lamp with infrared rays - Electronic positioning of the pressure rollers - "K-2 Radius" trimming unit - Chamfering and Radius milling unit "R-HP Multiedge 2R" - Rounding unit "Round 2-A Multiedge 1R" - MULTIEDGE kit with 3 automatic positions straight/R/R, for "Round 2-A" - Radius scraper unit "RAS-HP Multiedge 2R" - Flat scraper "RC-N" - Buffing unit "SP-V" Machine is new and still in original packaging. Promotional machine at a special price.

Condition: like new (used), Year of construction: 2010, max. wheel diameter 210 mm gear width 350 mm max. module 4 min. module 0,3 Control Siemens 840 D Powerline turning speeds 300 - 4000 U/min maximum axial offset 300 mm tailstock adjustment 350 mm swival range +/- 40 ° total power requirement 46 kW weight of the machine ca. 9,5 t dimensions of the machine ca. 6,2 x 2,9 x 3,5 m Genesis 210HiC - Vertical Hobbing Machines with Optional Chamfer Rolling. The Genesis Hobbing Machines with vertical workpiece axis offer highly productive Iodeu A I Dbopfx Aacjtn gear hobbing with optional chamfering and deburring capability. Workpiece diameter, max. 210 mm. Module, max. 3/4* mm. Workstation consisting of: -- Gleason milling machine "Genesisi 210 HIC" -- Borries embosser 315 WP-C -- Promot-Automation "loading and unloading unit"

Condition: good (used), Year of construction: 1991, Saw Blade Chamfering Machine Itedshwixdepfx Aacjn Manufacturer: Loroch Model: AK Year of manufacture: 1991 For chamfering HSS and segment saw blades

Condition: ready for operation (used), Year of construction: 2013, Tools Max tool length 5760 mm Additional Equipment Joining Unit: 2 x 2.2 kW 200 Hz Gluing Unit: A12 Snipping Unit: Chamfer/Straight 2 x 0.35 kW Pneumatic Adjustment for Bevel/Straight Cross-Cuts Pneumatic 2-Point Adjustment for Cross-Cuts Isdpfexfw A Rox Aacjtn Pre-Milling Unit: 2 x 0.55 kW O degrees Pneumatic 2-Point Adjustment Multifunctional Shaping Unit: 2 x O, 4 kW Profile Scraper with Quick-Change Heads Pneumatic Adjustment Scraper Blade This BRANDT KDF 650 Highflex 1650 edgebander was manufactured in 2013. Ideal for precise edgebanding applications, it ensures reliable performance for woodworking professionals. Consider the opportunity to buy this BRANDT KDF 650 Highflex 1650 edgebander. Contact us for more information. Application Types Edge Banding

Condition: ready for operation (used), Year of construction: 1999, SCM Edge Banding Machine OLIMPIC S 220 - Manually adjustable infeed fence - Jointing unit - End trimming unit - Flush trimming unit Iodpfx Aasr A Eumscotn - Chamfer trimming unit - Automatic feed - Corner copying unit with 4 motors - Radius scraper knives - Flat scraper knife - Buffing unit - Hot air blower - Machine length: 7.50 m

Condition: new, overall weight: 48,000 kg, maximum load weight: 36,410 kg, axle configuration: 3 axles, Equipment: ABS, You can find our complete vehicle inventory, including vehicles available immediately and at short notice, on our website. Excerpt from the equipment list. Full specification available on request. Gooseneck * Gooseneck in SNT design to optimize loading area length, approx. 3,700 mm long * Rear with chamfer approx. 1,000 mm x 10°, for tractors: 4 x 2, 6 x 2, and 6 x 4 * Front wall made of steel, removable, approx. 400 mm high * ASPÖCK-UNIBOX on the front connection panel with sockets * 3 kW electro-hydraulic unit for controlling hydraulic operations, except for hydraulic winches * Outer beams on the gooseneck with mounting holes for bolted lashing rings * 2 pairs of screw-in lashing rings included (LC 5,000 daN) * 1 pair of recessed lashing rings in the rear area of the gooseneck (LC 10,000 daN) * Approx. 40 mm hardwood flooring over the gooseneck * 2-inch kingpin * Guide plate on the gooseneck for the fifth wheel plate, approx. 500 mm wide * Round NATO socket at the front connection panel (Maeler & Kaege VG 96 917) * 1 pair of stakesockets recessed on the gooseneck for plug-in stakes approx. 100 x 50 mm (inside the chassis beam) Loading platform * Extendable loading platform, approx. 8,800 mm long with chamfer at the rear approx. 500 mm x 10° * Recess in the platform including the chamfer for receiving the excavator dipper stick, approx. 2,490 x 750 x 210/290 mm (L x W x H) * Continuous hardwood flooring approx. 50 mm thick on the loading platform, interrupted only between the axles * 1 intermediate table, approx. 300 mm wide, for the extension tube with large cross-section * Platform locking with conically welded securing profiles at approx. every 250 mm * 1 pair of lashing rings on the front cross member (LC 10,000 daN) * 9 pairs of recessed, outward-folding lashing rings in the outer frame of the loading area (LC 10,000 daN) * 1 pair of fixed wheel recesses in front of the axles, open up to the gooseneck cross member, approx. 700 x 410 mm (W x D) * 1 pair of fixed wheel recesses, approx. 1,480 x 700 x 410 mm (L x W x D), in the loading area between the 1st and 2nd axle * Aluminium covers for the wheel recesses in front of the axles and between the 1st and 2nd axles, also serving as extension planks * Hardwood flooring on the loading platform chamfer * Painted-on sand coating on the outer frame of the loading area as well as on the chequered plates of the platform Chassis * BPW axles and suspension * 1st and 2nd axle rigid * 3rd axle self-steering * 3rd axle with electro-magnetic reverse lockout, activated via reverse gear and manually * Air suspension with lift and lower valve * 1st axle with start-up aid * 2 axle load gauges mounted on the left side, including axle load diagram Tyres * 235/75 R 17.5 3PMSF twin tyre configuration * TPMS tyre pressure monitoring system in accordance with ECE R 141 Lighting * 1 LED work light each on the left and right in front of the axles, wired to the tractor unit Loading ramps * Hydraulic loading ramps DR-15/60-900-4350-HB-HV-M, a pair of two-piece steel ramps approx. 4,350 mm long and approx. 900 mm wide * Hardwood covering * Hydraulically foldable ramp tips * Ramps can be moved individually hydraulically approx. 235 mm outward and approx. 215 mm inward * Hardwood covering on the platform chamfer * Ramp with hardwood covering Brake system WABCO EBS-E according to EU regulations Isdpjxc Axrofx Aacjtn Lighting system * 24-volt lighting system * ASPÖCK-NORDIK full LED

Condition: new, Special offer price for in-stock items! Only while supplies last! Price net ex-works, freight prepaid. The machine does not include a base frame. BF3 Deluxe base frame is available separately under item no. 56-1017. Drilling capacity in steel: 32 mm Drilling capacity in cast iron: 40 mm Max. cutter head diameter: 80 mm Throat: 220 mm Spindle speed: (12) 75 - 3200 rpm Spindle mount: MT 4 Quill stroke: 125 mm Table size: 800 x 240 mm Travel (x / y): 555 / 225 mm Milling head swivel range: -90° to +90° Distance spindle to table: 60 - 485 mm Milling head height adjustment: 425 mm T-slot size: 14 mm Motor power output S1 100%: 1.1 / 1.5 kW (400 V) Motor power input S6 40%: 1.5 / 2.2 kW (400 V) Machine dimensions (W x D x H)*: 1140 x 770 x 1500 mm Weight approx.: 287 kg * without base frame Isdpfxsdh Hbcj Aacotn Features: - Easy and quick speed changes using the gear selector switch - Versatile applications such as drilling, milling, threading, etc. - Extremely smooth operation thanks to ground gears running in an oil bath - Forward and reverse rotation for threading - Spindle adjustment via handle, fine adjustment via handwheel - Dovetail guide for the x-, y-, and z-axes, adjustable via V-shaped guides - Milling head pivots on both sides for angle drilling, milling chamfers, etc. - Large, solid cross table with precise surface finish - Optimal price-performance ratio for the cost-conscious user Scope of delivery: Keyless drill chuck 3-16 mm / B 16 Drill chuck arbor MK 4 / B 16 M 16 drawbar spindle MK 4/3 reduction sleeve MK 4/27 mm combination milling arbor Height-adjustable protective cover Thread cutting device LED machine light Digital spindle stroke indicator Lamellar protective cover Longitudinal measuring scale Operating tool

Condition: used, Holz Her STREAMER 1057 XL FÜ + PU Edge thickness: 0.4 - 6 mm Modern control unit with selector switch for aggregate settings Fully automatic edge magazine for roll and strip material Glue application station GLU-JET cartridge + PU bonding Adhesive application via nozzle technology Touch-sensitive nozzle Workpiece height: 6-60 mm Automatic glue height adjustment High-quality 3-roller pressure unit, 1st roller motorized Pneumatic end trimming unit for roll and strip material up to 6 mm edge thickness Pneumatic adjustment of trimming saws from 0-10° angle Milling unit: flush trimming 6 mm, radius milling - bevel milling - 15° Corner copying unit - 3 mm edge thickness Scraper unit for chamfers and radii with 2 scraper holders Surface scraper unit - finish Buffing unit Spraying device in infeed and outfeed areas, as well as for PU Machine supplied with all working units/tools Machine is WORKSHOP TESTED First delivered in 2016 Itedpfxjxg Ixrj Aacen Available ex stock Lieboch

Condition: used, Year of construction: 1998, Used machine Year of manufacture: 1998 Proven quick heating tank; heating time approx. 5 minutes. Iodjw Tfw Hepfx Aacstn Safety interlock for the application roller; the roller engages only after reaching operating temperature. Centrally height-adjustable upper pressure bar. Edge feeding and roll separation pneumatically controlled. Connected load: approx. 11.5 kW, heating power 4.5 kW, frequency inverter 300 Hz, 4 kVA. HF crosscut saw unit: electrically and pneumatically controlled, motor power 0.37 kW. Saw blade diameter: 100 mm HF flush milling unit: for radius, straight and chamfer milling. Crosscutting from rolls up to 3 mm. Edgebanding and crosscutting up to 5 mm. Minimum workpiece length: 260 mm Minimum workpiece width: 90 mm Workpiece thickness: Chamfer milling from 10 mm / radius milling from 13 mm / max. 45 mm Extendable workpiece support at front. Digital position display for feed height adjustment, edge thickness, and milling. With chassis. With heated infeed ruler. Compressed air connection: 6 bar Central extraction port: 100 mm Dimensions (L x W x H): 3115 x 1230 x 1200 mm Approx. 560 kg Availability: short notice Storage location: Flörsheim

Condition: excellent (used), Year of construction: 2011, Edge banding machine for edging and post-processing of panel materials Edge thickness for rolls: 0.4 - 3 mm Edge thickness for strips: 8 mm Max. 15 mm possible with tool change on the milling unit 1826 Edge height: max. 65 mm Workpiece thickness: 6 - 60 mm Workpiece width: min. 60 mm Workpiece length: min. 160 mm Feed speed: stepless 10 - 20 m/min Control unit PPC 221 – with 8.4" VGA color screen Motorized adjustment of the infeed fence, adjustable via control unit Pre-milling unit 1802 400 V (2 x 2.0 kW, 200 Hz, 12,000 rpm) Edge feed 1901 SYNCHRO Automatic feeding of roll and strip material Glue application system Glu Jet GJ301 automatic Automatic glue height adjustment (contact nozzle) Glu Jet hybrid technology – for processing EVA and PUR adhesives Glue application via nozzle technology Heat-up time: 3 minutes Glue granulate container 5 kg for GJ301 PRESSURE UNIT – Pressure section 1914-1 MOT END-TRIMMING UNIT – End-trimming unit KA 701 pneumatic (2 x 0.65 kW, 200 Hz, 12,000 rpm) Pneumatic swivel function 0/10° for coils and strips MULTIFUNCTIONAL END-TRIMMING UNIT End-trimming unit 1826 MOT4 (2 x 0.65 kW) with 4 NC servo drives for flush, radius, and chamfer cuts CORNER ROUNDING UNIT Profile milling unit 1833 MOT4 (2 x 0.65 kW, 200 Hz, 12000 rpm) Milling the top and bottom longitudinal edges, copy milling of the upper and lower front and rear longitudinal edges, corner rounding, postforming of corners with 4 adjustment motors SCRAPING UNIT 1927 MOT5 Carbide reversible blades for scraping knives 1929 R = 2.0 mm (2 pieces required) FLAT SCRAPER 1964 For removing excess glue to achieve a clean glue joint BUFFING UNIT 1944K (2 x 0.2 kW, 400 V, 1,400 rpm) For edge cleaning and polishing, incl. plunge control, incl. 2 textile buffing discs GROOVING UNIT 1841 Isdpsxggmbjfx Aacstn 1 x 3.8 kW, 200 Hz, 12,000 rpm, Saw blade Ø 160 mm, Cutting width 4–9 mm

Condition: excellent (used), Year of construction: 2014, operating hours: 39,000 h, functionality: fully functional, machine/vehicle number: 3325, Model S-191FTL-PRM Ø 50 mm Axis travel Milling vertical axis Z = 200 mm Milling transverse axis Y = 200 mm Milling longitudinal axis X = 410 mm Power / Thrust Z-Y 2.5 kW / 550 daN X 4.5 kW / > 550 daN Isdpfjw T Sl Dex Aacstn X-Y-Z Traversing speed: 40 m/min Acceleration: 10 m/s² Resolution X-Y-Z: 0.0001 mm Measuring system: glass scale MAIN SPINDLE C (Horizontal turning axis) Power: 15 kW Torque / peak: 22 / 28 Nm Measuring system: direct Resolution: 0.0001° Accuracy: 0.001° Bar capacity: Ø 32 mm (option 50 mm) Turning spindle speed: 72,000°/min Clamping force, turning: 4,900 N at 6 bar B-AXIS SPINDLE INCLINATION (machining) Power: 4.3 kW Torque: 119 / 226 Nm Angular travel: -25° / +115° Measuring system: direct Resolution: 0.0001° Accuracy: 0.001° Rotational speed: 36,000°/min Locking torque: 200 Nm MACHINING SPINDLE Power: 8 kW Torque: S1 = 9.5 Nm / S6 = 11.5 Nm Max speed: 30,000 min-1 (option 40,000 min-1) Tool clamping force: 1,000 N Locking torque: mechanical locking with straight toothing Tool holder taper: HSK-40 (A or E) Through-spindle lubrication: 30 to 100 bar (optional) TOOL CHANGER Number of tools: 30 (option 60) Number of indexed tools: all Tool change time: 1.2 sec. Chip-to-chip time: 4.4 sec. Max tool diameter: Ø 40 mm (80 mm if adjacent station empty) Max tool length: 130 mm Max tool weight: 1.5 kg MISCELLANEOUS Installed power: 25 kVA Operating voltage: 3/N/PE/400V/230V 50 Hz Pneumatics: 6 bar (dry air) CNC CONTROL: Fanuc 31i Screen: 15'' color Keyboard: alphanumeric Control panel features: - 1 key switch for functions - 1 feedrate potentiometer 0–120% - 1 spindle speed potentiometer 50–120% - 1 quick-selection button for machine functions - 1 integrated electronic handwheel CNC Options - Data server with ATA Flash, 1GB memory capacity - J947 1 MB RAM memory - S677 TCPC (tool center point control for 5-axis machining) - S808 Al nano HPCC (Al high precision contour control II) - J930 tool tip radius compensation - J893 coordinate system rotation - J819 Helix (cylindrical) interpolation - J953 memory capacity for 1,000 programs - J828 tapping without compensation chuck - S615 insertion of radii and chamfers - J894 workpiece coordinate system - S993 part setup error - R522 inclined machining plane control with guidance Interfaces - Bumotec-specific programming to minimize collisions - Simplified tool management to prevent input errors - Tool management by threshold value, change according to part count or tool life - Automatic tool setting on machine for easier tool handling - Part counter and production management Y-AXIS (horizontal cross milling axis) Travel: 200 mm Power / thrust: 4.8 kW / 240 daN Resolution: 0.0001 mm Max travel, V1: 50 m/min Max travel, V2: 20 m/min Measuring system: glass scale Z-AXIS (horizontal longitudinal milling axis) Travel: 400 mm Resolution: 0.0001 mm Max travel, V1: 50 m/min Max travel, V2: 20 m/min Measuring system: glass scale Includes 8kW cooling unit Emergency braking system integrated Subject to errors and omissions, technical specifications are provided without obligation.

Condition: ready for operation (used), Year of construction: 2009, General Data Measurements depth 7300 mm Additional Equipment Glue pot granules including 2 glue pots for PUR Jointing unit Spraying device Crosscut saw unit Flush, radius, and chamfer capability Corner copying Scrapers Buffing unit This OTT Twister edgebander was manufactured in 2009. It features a panel thickness capacity up to 60 mm and a feed rate of 20 m/min. Equipped with multiple units including jointing, crosscut saw, and corner copying, it also offers flush, radius, and chamfer capabilities. Ideal for efficient edge banding operations. Contact us for more information about this machine. Application Types Ijdpfx Aaoxfct Iecstn Edge Banding

Condition: used, mileage: 24,510 km, power: 213 kW (289.60 HP), first registration: 03/2022, overall weight: 18,000 kg, fuel type: diesel, color: red, axle configuration: 2 axles, next inspection (TÜV): 09/2026, gearing type: automatic, emission class: euro6, Equipment: ABS, air conditioning, electronic stability program (ESP), Like-new and impeccably maintained 18-ton MAN TGM 18.290 construction machine transporter TG3 with automatic transmission, air conditioning, air-suspended rear axle, Möller transport system 7.30 m with hydraulic loading ramps for construction equipment transport. Single owner vehicle, operated exclusively under a MAN maintenance contract, with only 24,510 km. Truck Equipment: - Short CC cab - Euro 6 D engine - 4 x 2 drive - Wheelbase: 5,425 mm - Automatic transmission MAN TipMatic 12.12 OD - MAN Idle Speed Driving function - MAN TipMatic Efficiency driving program - Front axle with leaf springs, rear axle air-suspended - Differential lock on rear axle - Front axle: 7,500 kg, rear axle: 11,500 kg (technically up to 12,000 kg) - Stabilizer bars front and rear, shock absorbers front and rear - Axle ratio: i=4.11 - Advanced braking assist - Disc brakes front and rear - Emergency Braking Assist (EBA) - Lane Departure Warning (LDW) - EBS with ABS and ASR - ESP - MAN EasyStart hill-hold function - Lane Departure Warning (LDW) - Air conditioning - Cruise control - Sun visor - Multifunction steering wheel - 220-liter fuel tank - 2 LED beacon lights on cab roof - 2 work lights on cab roof - LED daytime running lights - LED side marker lights - 2 LED outline marker lights - Electrically adjustable and heated exterior mirrors - Electric window lifts - Driver's comfort seat, air-suspended, with lumbar support and adjustable shoulders - MAN Media System 7" - German vehicle, single owner - Excellent, well-kept condition - Full MAN maintenance contract history - Regular maintenance records available Möller Transport System Equipment: - Construction machine transport bed approx. 7.30 m long x 2.48 m wide - Aluminum drop sides approx. 0.40 m high; side wall length approx. 5,600 mm to ramp incline - 2 hydraulic rear loading ramps - Fully hot-dip galvanized, reinforced for heavy-duty use - Outer frame chamfered with continuous lashing points for load securing, usable as lashing eyes tested to DIN-EN 12640 (up to 2,000 kg) - Additional 8 x Thiele eyes integrated in the outer frame Itedpoxhat Dofx Aacjn - Aluminum forklift collision guard mounted on outer frame - Floor made of grating for high point loads - Fixed front wall made of steel frame with aluminum profiles, 800 mm high - Storage rack for securing equipment on front wall - 8 mm phenolic board mounted for front wall wear protection - Stanchion system (Kinnegripp): front corner stanchions fixed; 2 removable/foldable side stanchions each side - 2 stainless steel lockable toolboxes (approx. 600 mm x 600 mm x 300 mm) - 2 LED work lights in the front wall, protected/with switch in cab - 2 support plates with carry handles in individual holders - Second axle plastic half-shell mudguards with splash flaps - 40 L/min constant hydraulic pump - 60-80 liter aluminum hydraulic tank - 1 pair of hydraulic folding ramps mounted at vehicle rear (2-piece, approx. 2,300 mm + 600 mm long, approx. 1,250 mm wide, hydraulic folding, grating design) - Ramp control via separate control block, protected at vehicle rear (right) - 2 pairs of folding additional rear supports - Ball hitch coupling + 12V connection Internal vehicle number: 2575 Price NET plus 19% VAT. Attractive financing options available upon request. All information without guarantee. Subject to errors and prior sale.

Condition: new, mileage: 100 km, power: 375 kW (509.86 HP), fuel type: diesel, gearing type: automatic, axle configuration: > 3 axles, overall weight: 32,000 kg, loading space length: 9,000 mm, loading space width: 2,550 mm, emission class: euro6, color: white, Year of construction: 2025, Equipment: ABS, air conditioning, navigation system, parking heater, 4-axle Volvo machine carrier/working platform transporter – FH 500 8x2R – Trailing axle, electro-hydraulically steered, single tires – Rear axle suspension with air suspension: 1 drive axle, 1 trailing axle – Safety long-distance driver's cab FH – Cab heater, 2 kW – 33 l refrigerator with freezer compartment under the bunk – Air suspension on front axle(s) – Gearbox/I-Shift operation from the driver's seat control unit – I-Shift driving modes: Standard, Performance and Economy – I-See with map-based topography and traffic information – Eco cruise control (cruise control), including brake cruise control – Manual shifting in automatic mode possible (incl. kickdown) Adaptive traction control – Distance-regulating cruise control (ACC) with collision warning and emergency braking function – Lane keeping assistant – Side collision avoidance and turn assist (both sides) – Driver alertness system, warns of fatigue * VEB Volvo Engine Brake * etc. WIESE body for platform and construction machine transport with hydraulic loading ramps with 2 pairs of wheel recesses incl. covers Body dimensions: - Length approx. 9,050 mm usable length - External width 2,550 mm - Loading height approx. 1,050 mm unladen (top of floor) - Stable, weight-optimized steel welded construction, space-efficient design Itodpfew Itmrex Aacon - Short cross member spacing for high point loads - Chamfered rear for low ramp angle - Outer frame profile 90° - Bulkhead in reinforced design - Storage box inside, below the bulkhead - Grating floor - Designed for 5,000 daN wheel load - Steel toolboxes above the axles and anti-slip coating on outer frame Load securing: - 9 pairs of heavy-duty lashing rings, 8 t, recessed into outer frame - Longitudinal beams with Multi-X contour full length with numerous 2.5 t lashing points - 4 lashing eyes 8 t at rear (left/right/center/center) - 4 lashing eyes 8 t in front of bulkhead (left/right/center/center) - Outer frame profile 90° Ramps: Type: WFB 20 S-2 Load capacity: 18,000 kg per pair Platform length approx.: 4,360 mm (2,725 mm + 1,635 mm) Platform width approx.: 850 mm per ramp - Ramps designed as 2 single/extended ramps, both ramps laterally adjustable - Ramp can be used as a loading ramp or crossover ramp for warehouse equipment (extension remains closed); the fixed part is placed on the warehouse ramp - Sturdy tension bar for transport security (optionally with strap tensioning) - 2 hydraulic rear supports with plates, warning sound and indicator in cab - Ramp and support driven by electro-hydraulic system - Control via radio remote as well as emergency operation at control block - Control block mounted in stainless toolbox mounted laterally on frame - Superwinch 8.2 t with approx. 20 m steel cable - Access with handrails right and left for loading area access - 5 stainless steel toolboxes in drawer design, incl. lighting - Side panels as per sample images (green vehicle) - Body coating KTL - Tow coupling with ball head at rear, 3.3 t - 4 LED work lights - 2 LED rear lights mounted at top of bulkhead - 4 LED work lights outside on frame for area illumination - 2 LED work lights at rear - 1 removable beacon at rear The stock vehicle is supplied with a white cab and superstructure in nova gray (external frame lacquered in RAL color of choice on request) Further information upon request.

Condition: used, Year of construction: 2017, Used machine Year of manufacture: 2017 Condition: Factory overhauled by Lange Maschinenbau Minimum workpiece width approx. 75 mm Minimum workpiece thickness 8 - 50 mm Minimum workpiece length approx. 120 mm/180 mm for corner rounding Edge thickness 0.4 - 2 mm Stepless chip removal of the joining unit 0 - 2.0 mm Joining unit with two counter-rotating, insert-controlled joining units Diamond tool height = 55 mm Direct glue application to the workpiece, glue pot with 1.5 kg capacity EVA/PUR glue pot with discharge function Pressure unit Cross-cutting unit with HF motor, 2 saw blades, and high-precision linear guides Combination milling station for radius and chamfer milling Corner rounding unit Surface scraper unit Suction pipe system with 90° bend and manual slide valve mounted on the machine Machine length: 3273 mm Ijdpew Sbblofx Aacetn Availability: Short term Location: Hochheim

Condition: excellent (used), Catalogue number 7450 TECHNICAL SPECIFICATIONS - max. diameter of machined components: 140 mm - min. diameter of machined components: 30 mm - installed bushing with 70 mm diameter - 2-knife head - any length of machined components - motor: 4 kW - dimensions (L/W/H): 700x500x1100 mm - weight: 100 kg ADVANTAGES – includes bushing with 70 mm diameter Itodpfxouhfa Uo Aacen – used chamfering machine – very good condition – used machine Net price: 5,900 PLN Net price: 1,400 EUR (based on exchange rate 4.25 EUR) (Prices may vary with larger fluctuations)

Condition: used, Year of construction: 2004, Suitable for automatic grinding or re-serration and chamfering of HSS and segment saw blades as well as solid carbide saws with ceramic grinding wheels and deep grinding with CBN or diamond grinding wheels. Accessories: Total enclosure, Sawblade magazine with 3 saw blade stacks each with a stack height of 250 mm (for approx. 35 saw blades each) #9007511, Device for automatic chamfering of sawblades from Ø 145 mm, Automatic threading of the grinding wheel, Automatic fire extinguishing system, Automatic central lubrication, Itedpfsw I Sk Njx Aacsn Coolant system 400 L with coolant tank with filter system, Machine lamp, Oil collecting tray, 3 sawblade mandrels (loader). Saw diameter: 40-710mm Tooth pitch: 1 - 55mm Number of teeth: 2 - 998 Saw blade thickness: max. 8 mm Grinding wheel diameter: 200x32mm Connected load: 10kW (400V / 50Hz) mass: about 3200 kg Dimensions: L x W x H = 1198 x 1750 x 2015 mm colour: blue/grey RAL 7047 / blue RAL 250-50-20.

Condition: excellent (used), Year of construction: 2010, operating hours: 2,560 h, functionality: fully functional, total length: 5,760 mm, workpiece height (max.): 60 mm, edge thickness (max.): 12 mm, height adjustment type: electric, plate height: 60 mm, Brandt 1650 Highflex with return conveyor and PU glue box, top condition Year of manufacture: 2010 Operating hours: 2,560 h Total edge length: 211,844 m Edgebanding thickness max: 12 mm Panel thickness max: 60 mm Coiled material thickness max: 3 mm Minimum workpiece width: 70 mm Feed speed max: 18 m/min Infinitely variable feed speed Motorized height adjustment Granulate glue system Premelting tank BRANDT QUICKMELT KD glue system 2 x PU glue tanks Strip magazine Joint milling aggregate End trimming unit with 2 motors Flush/radius/chamfer stations: 1 Corner copying unit with 2 motors Scraper unit Profile scraper, flat scraper Buffing station Aggregates synchronized NC axis/axes Design: right-hand machine Machine length: 5,760 mm Conformity marking: CE mark Ligmatech Boomerang return system Itjdpevnwf Uofx Aacen PU glue box The machine is still in operation; inspection encouraged; available by arrangement No warranty Collection only, forklift available Net price plus VAT Price negotiable

Condition: used, mileage: 24,510 km, power: 213 kW (289.60 HP), first registration: 03/2022, overall weight: 18,000 kg, fuel type: diesel, color: red, axle configuration: 2 axles, next inspection (TÜV): 09/2026, gearing type: automatic, emission class: euro6, Equipment: ABS, air conditioning, electronic stability program (ESP), Like-new and impeccably maintained 18-ton MAN TGM 18.290 construction machine transporter TG3 with automatic transmission, air conditioning, air-suspended rear axle, Möller transport system 7.30 m with hydraulic loading ramps for construction equipment transport. Single owner vehicle, operated exclusively under a MAN maintenance contract, with only 24,510 km. Truck Equipment: - Short CC cab - Euro 6 D engine - 4 x 2 drive - Wheelbase: 5,425 mm - Automatic transmission MAN TipMatic 12.12 OD - MAN Idle Speed Driving function - MAN TipMatic Efficiency driving program - Front axle with leaf springs, rear axle air-suspended - Differential lock on rear axle - Front axle: 7,500 kg, rear axle: 11,500 kg (technically up to 12,000 kg) - Stabilizer bars front and rear, shock absorbers front and rear - Axle ratio: i=4.11 - Advanced braking assist - Disc brakes front and rear - Emergency Braking Assist (EBA) - Lane Departure Warning (LDW) - EBS with ABS and ASR - ESP - MAN EasyStart hill-hold function - Lane Departure Warning (LDW) - Air conditioning - Cruise control - Sun visor - Multifunction steering wheel - 220-liter fuel tank - 2 LED beacon lights on cab roof - 2 work lights on cab roof - LED daytime running lights - LED side marker lights - 2 LED outline marker lights - Electrically adjustable and heated exterior mirrors - Electric window lifts - Driver's comfort seat, air-suspended, with lumbar support and adjustable shoulders - MAN Media System 7" - German vehicle, single owner - Excellent, well-kept condition - Full MAN maintenance contract history - Regular maintenance records available Möller Transport System Equipment: - Construction machine transport bed approx. 7.30 m long x 2.48 m wide - Aluminum drop sides approx. 0.40 m high; side wall length approx. 5,600 mm to ramp incline - 2 hydraulic rear loading ramps - Fully hot-dip galvanized, reinforced for heavy-duty use - Outer frame chamfered with continuous lashing points for load securing, usable as lashing eyes tested to DIN-EN 12640 (up to 2,000 kg) - Additional 8 x Thiele eyes integrated in the outer frame - Aluminum forklift collision guard mounted on outer frame - Floor made of grating for high point loads - Fixed front wall made of steel frame with aluminum profiles, 800 mm high Itsdpfx Ajxhatqsacen - Storage rack for securing equipment on front wall - 8 mm phenolic board mounted for front wall wear protection - Stanchion system (Kinnegripp): front corner stanchions fixed; 2 removable/foldable side stanchions each side - 2 stainless steel lockable toolboxes (approx. 600 mm x 600 mm x 300 mm) - 2 LED work lights in the front wall, protected/with switch in cab - 2 support plates with carry handles in individual holders - Second axle plastic half-shell mudguards with splash flaps - 40 L/min constant hydraulic pump - 60-80 liter aluminum hydraulic tank - 1 pair of hydraulic folding ramps mounted at vehicle rear (2-piece, approx. 2,300 mm + 600 mm long, approx. 1,250 mm wide, hydraulic folding, grating design) - Ramp control via separate control block, protected at vehicle rear (right) - 2 pairs of folding additional rear supports - Ball hitch coupling + 12V connection Internal vehicle number: 2575 Price NET plus 19% VAT. Attractive financing options available upon request. All information without guarantee. Subject to errors and prior sale.

Condition: new, mileage: 100 km, power: 375 kW (509.86 HP), overall weight: 32,000 kg, fuel type: diesel, color: white, axle configuration: > 3 axles, gearing type: automatic, emission class: euro6, loading space width: 2,550 mm, loading space length: 9,000 mm, Year of construction: 2025, Equipment: ABS, air conditioning, navigation system, parking heater, 4-axle Volvo machine carrier/working platform transporter – FH 500 8x2R – Trailing axle, electro-hydraulically steered, single tires – Rear axle suspension with air suspension: 1 drive axle, 1 trailing axle – Safety long-distance driver's cab FH – Cab heater, 2 kW – 33 l refrigerator with freezer compartment under the bunk – Air suspension on front axle(s) – Gearbox/I-Shift operation from the driver's seat control unit Iodpfxjw Itmls Aacjtn – I-Shift driving modes: Standard, Performance and Economy – I-See with map-based topography and traffic information – Eco cruise control (cruise control), including brake cruise control – Manual shifting in automatic mode possible (incl. kickdown) Adaptive traction control – Distance-regulating cruise control (ACC) with collision warning and emergency braking function – Lane keeping assistant – Side collision avoidance and turn assist (both sides) – Driver alertness system, warns of fatigue * VEB Volvo Engine Brake * etc. WIESE body for platform and construction machine transport with hydraulic loading ramps with 2 pairs of wheel recesses incl. covers Body dimensions: - Length approx. 9,050 mm usable length - External width 2,550 mm - Loading height approx. 1,050 mm unladen (top of floor) - Stable, weight-optimized steel welded construction, space-efficient design - Short cross member spacing for high point loads - Chamfered rear for low ramp angle - Outer frame profile 90° - Bulkhead in reinforced design - Storage box inside, below the bulkhead - Grating floor - Designed for 5,000 daN wheel load - Steel toolboxes above the axles and anti-slip coating on outer frame Load securing: - 9 pairs of heavy-duty lashing rings, 8 t, recessed into outer frame - Longitudinal beams with Multi-X contour full length with numerous 2.5 t lashing points - 4 lashing eyes 8 t at rear (left/right/center/center) - 4 lashing eyes 8 t in front of bulkhead (left/right/center/center) - Outer frame profile 90° Ramps: Type: WFB 20 S-2 Load capacity: 18,000 kg per pair Platform length approx.: 4,360 mm (2,725 mm + 1,635 mm) Platform width approx.: 850 mm per ramp - Ramps designed as 2 single/extended ramps, both ramps laterally adjustable - Ramp can be used as a loading ramp or crossover ramp for warehouse equipment (extension remains closed); the fixed part is placed on the warehouse ramp - Sturdy tension bar for transport security (optionally with strap tensioning) - 2 hydraulic rear supports with plates, warning sound and indicator in cab - Ramp and support driven by electro-hydraulic system - Control via radio remote as well as emergency operation at control block - Control block mounted in stainless toolbox mounted laterally on frame - Superwinch 8.2 t with approx. 20 m steel cable - Access with handrails right and left for loading area access - 5 stainless steel toolboxes in drawer design, incl. lighting - Side panels as per sample images (green vehicle) - Body coating KTL - Tow coupling with ball head at rear, 3.3 t - 4 LED work lights - 2 LED rear lights mounted at top of bulkhead - 4 LED work lights outside on frame for area illumination - 2 LED work lights at rear - 1 removable beacon at rear The stock vehicle is supplied with a white cab and superstructure in nova gray (external frame lacquered in RAL color of choice on request) Further information upon request.

Condition: excellent (used), Catalogue number 7733 TECHNICAL DATA - Belt width: 150mm - Oscillation - Vertical oscillation stroke - 2 rotation speeds - Worktable: 1180x370mm - Worktable adjustments: up/down, front/back, and angled - Motor: 3kW - Pad – for precision grinding - With fan - Working grinding length on belt: 700mm - Top/bottom cutters for edge chamfering - Extraction port diameter: 70mm - Dimensions (L/W/H): 1550/1400/1300mm - Weight: 490kg ADVANTAGES – With oscillation – With pad – With fan – Set includes cutters for edge joining/chamfering Ijdpfx Aaoxdc Enjcjtn – Suitable for contour and straight grinding – Not painted – Used sander, very good condition Net price: 7500 PLN Net price: 1760 EUR (based on exchange rate 4.25 EUR) (Prices may vary depending on significant currency fluctuations)

Condition: used, mileage: 24,510 km, power: 213 kW (289.60 HP), first registration: 03/2022, overall weight: 18,000 kg, fuel type: diesel, color: red, axle configuration: 2 axles, next inspection (TÜV): 09/2026, gearing type: automatic, emission class: euro6, Equipment: ABS, air conditioning, electronic stability program (ESP), Like-new and impeccably maintained 18-ton MAN TGM 18.290 construction machine transporter TG3 with automatic transmission, air conditioning, air-suspended rear axle, Möller transport system 7.30 m with hydraulic loading ramps for construction equipment transport. Single owner vehicle, operated exclusively under a MAN maintenance contract, with only 24,510 km. Truck Equipment: - Short CC cab - Euro 6 D engine - 4 x 2 drive - Wheelbase: 5,425 mm - Automatic transmission MAN TipMatic 12.12 OD - MAN Idle Speed Driving function - MAN TipMatic Efficiency driving program - Front axle with leaf springs, rear axle air-suspended - Differential lock on rear axle - Front axle: 7,500 kg, rear axle: 11,500 kg (technically up to 12,000 kg) - Stabilizer bars front and rear, shock absorbers front and rear - Axle ratio: i=4.11 - Advanced braking assist - Disc brakes front and rear - Emergency Braking Assist (EBA) - Lane Departure Warning (LDW) - EBS with ABS and ASR - ESP - MAN EasyStart hill-hold function - Lane Departure Warning (LDW) - Air conditioning - Cruise control - Sun visor - Multifunction steering wheel - 220-liter fuel tank - 2 LED beacon lights on cab roof Iedpfx Aaoxharyjcstn - 2 work lights on cab roof - LED daytime running lights - LED side marker lights - 2 LED outline marker lights - Electrically adjustable and heated exterior mirrors - Electric window lifts - Driver's comfort seat, air-suspended, with lumbar support and adjustable shoulders - MAN Media System 7" - German vehicle, single owner - Excellent, well-kept condition - Full MAN maintenance contract history - Regular maintenance records available Möller Transport System Equipment: - Construction machine transport bed approx. 7.30 m long x 2.48 m wide - Aluminum drop sides approx. 0.40 m high; side wall length approx. 5,600 mm to ramp incline - 2 hydraulic rear loading ramps - Fully hot-dip galvanized, reinforced for heavy-duty use - Outer frame chamfered with continuous lashing points for load securing, usable as lashing eyes tested to DIN-EN 12640 (up to 2,000 kg) - Additional 8 x Thiele eyes integrated in the outer frame - Aluminum forklift collision guard mounted on outer frame - Floor made of grating for high point loads - Fixed front wall made of steel frame with aluminum profiles, 800 mm high - Storage rack for securing equipment on front wall - 8 mm phenolic board mounted for front wall wear protection - Stanchion system (Kinnegripp): front corner stanchions fixed; 2 removable/foldable side stanchions each side - 2 stainless steel lockable toolboxes (approx. 600 mm x 600 mm x 300 mm) - 2 LED work lights in the front wall, protected/with switch in cab - 2 support plates with carry handles in individual holders - Second axle plastic half-shell mudguards with splash flaps - 40 L/min constant hydraulic pump - 60-80 liter aluminum hydraulic tank - 1 pair of hydraulic folding ramps mounted at vehicle rear (2-piece, approx. 2,300 mm + 600 mm long, approx. 1,250 mm wide, hydraulic folding, grating design) - Ramp control via separate control block, protected at vehicle rear (right) - 2 pairs of folding additional rear supports - Ball hitch coupling + 12V connection Internal vehicle number: 2575 Price NET plus 19% VAT. Attractive financing options available upon request. All information without guarantee. Subject to errors and prior sale.

Condition: new, mileage: 100 km, power: 375 kW (509.86 HP), overall weight: 32,000 kg, fuel type: diesel, color: white, axle configuration: > 3 axles, gearing type: automatic, emission class: euro6, loading space width: 2,550 mm, loading space length: 9,000 mm, Year of construction: 2025, Equipment: ABS, air conditioning, navigation system, parking heater, 4-axle Volvo machine carrier/working platform transporter – FH 500 8x2R – Trailing axle, electro-hydraulically steered, single tires – Rear axle suspension with air suspension: 1 drive axle, 1 trailing axle – Safety long-distance driver's cab FH – Cab heater, 2 kW – 33 l refrigerator with freezer compartment under the bunk – Air suspension on front axle(s) – Gearbox/I-Shift operation from the driver's seat control unit – I-Shift driving modes: Standard, Performance and Economy – I-See with map-based topography and traffic information – Eco cruise control (cruise control), including brake cruise control – Manual shifting in automatic mode possible (incl. kickdown) Adaptive traction control – Distance-regulating cruise control (ACC) with collision warning and emergency braking function – Lane keeping assistant – Side collision avoidance and turn assist (both sides) – Driver alertness system, warns of fatigue * VEB Volvo Engine Brake * etc. WIESE body for platform and construction machine transport with hydraulic loading ramps with 2 pairs of wheel recesses incl. covers Body dimensions: - Length approx. 9,050 mm usable length - External width 2,550 mm - Loading height approx. 1,050 mm unladen (top of floor) - Stable, weight-optimized steel welded construction, space-efficient design - Short cross member spacing for high point loads - Chamfered rear for low ramp angle - Outer frame profile 90° - Bulkhead in reinforced design - Storage box inside, below the bulkhead - Grating floor - Designed for 5,000 daN wheel load - Steel toolboxes above the axles and anti-slip coating on outer frame Isdpfx Aow Itl Uoacjtn Load securing: - 9 pairs of heavy-duty lashing rings, 8 t, recessed into outer frame - Longitudinal beams with Multi-X contour full length with numerous 2.5 t lashing points - 4 lashing eyes 8 t at rear (left/right/center/center) - 4 lashing eyes 8 t in front of bulkhead (left/right/center/center) - Outer frame profile 90° Ramps: Type: WFB 20 S-2 Load capacity: 18,000 kg per pair Platform length approx.: 4,360 mm (2,725 mm + 1,635 mm) Platform width approx.: 850 mm per ramp - Ramps designed as 2 single/extended ramps, both ramps laterally adjustable - Ramp can be used as a loading ramp or crossover ramp for warehouse equipment (extension remains closed); the fixed part is placed on the warehouse ramp - Sturdy tension bar for transport security (optionally with strap tensioning) - 2 hydraulic rear supports with plates, warning sound and indicator in cab - Ramp and support driven by electro-hydraulic system - Control via radio remote as well as emergency operation at control block - Control block mounted in stainless toolbox mounted laterally on frame - Superwinch 8.2 t with approx. 20 m steel cable - Access with handrails right and left for loading area access - 5 stainless steel toolboxes in drawer design, incl. lighting - Side panels as per sample images (green vehicle) - Body coating KTL - Tow coupling with ball head at rear, 3.3 t - 4 LED work lights - 2 LED rear lights mounted at top of bulkhead - 4 LED work lights outside on frame for area illumination - 2 LED work lights at rear - 1 removable beacon at rear The stock vehicle is supplied with a white cab and superstructure in nova gray (external frame lacquered in RAL color of choice on request) Further information upon request.

Condition: used, mileage: 24,510 km, power: 213 kW (289.60 HP), fuel type: diesel, gearing type: automatic, axle configuration: 2 axles, overall weight: 18,000 kg, first registration: 03/2022, next inspection (TÜV): 09/2026, emission class: euro6, color: red, Equipment: ABS, air conditioning, electronic stability program (ESP), Like-new and impeccably maintained 18-ton MAN TGM 18.290 construction machine transporter TG3 with automatic transmission, air conditioning, air-suspended rear axle, Möller transport system 7.30 m with hydraulic loading ramps for construction equipment transport. Single owner vehicle, operated exclusively under a MAN maintenance contract, with only 24,510 km. Truck Equipment: - Short CC cab - Euro 6 D engine - 4 x 2 drive - Wheelbase: 5,425 mm - Automatic transmission MAN TipMatic 12.12 OD - MAN Idle Speed Driving function - MAN TipMatic Efficiency driving program - Front axle with leaf springs, rear axle air-suspended - Differential lock on rear axle - Front axle: 7,500 kg, rear axle: 11,500 kg (technically up to 12,000 kg) - Stabilizer bars front and rear, shock absorbers front and rear - Axle ratio: i=4.11 - Advanced braking assist - Disc brakes front and rear - Emergency Braking Assist (EBA) - Lane Departure Warning (LDW) - EBS with ABS and ASR - ESP - MAN EasyStart hill-hold function - Lane Departure Warning (LDW) - Air conditioning - Cruise control - Sun visor - Multifunction steering wheel - 220-liter fuel tank - 2 LED beacon lights on cab roof - 2 work lights on cab roof - LED daytime running lights - LED side marker lights - 2 LED outline marker lights - Electrically adjustable and heated exterior mirrors - Electric window lifts - Driver's comfort seat, air-suspended, with lumbar support and adjustable shoulders - MAN Media System 7" - German vehicle, single owner - Excellent, well-kept condition - Full MAN maintenance contract history - Regular maintenance records available Itedpfx Aajxhargscen Möller Transport System Equipment: - Construction machine transport bed approx. 7.30 m long x 2.48 m wide - Aluminum drop sides approx. 0.40 m high; side wall length approx. 5,600 mm to ramp incline - 2 hydraulic rear loading ramps - Fully hot-dip galvanized, reinforced for heavy-duty use - Outer frame chamfered with continuous lashing points for load securing, usable as lashing eyes tested to DIN-EN 12640 (up to 2,000 kg) - Additional 8 x Thiele eyes integrated in the outer frame - Aluminum forklift collision guard mounted on outer frame - Floor made of grating for high point loads - Fixed front wall made of steel frame with aluminum profiles, 800 mm high - Storage rack for securing equipment on front wall - 8 mm phenolic board mounted for front wall wear protection - Stanchion system (Kinnegripp): front corner stanchions fixed; 2 removable/foldable side stanchions each side - 2 stainless steel lockable toolboxes (approx. 600 mm x 600 mm x 300 mm) - 2 LED work lights in the front wall, protected/with switch in cab - 2 support plates with carry handles in individual holders - Second axle plastic half-shell mudguards with splash flaps - 40 L/min constant hydraulic pump - 60-80 liter aluminum hydraulic tank - 1 pair of hydraulic folding ramps mounted at vehicle rear (2-piece, approx. 2,300 mm + 600 mm long, approx. 1,250 mm wide, hydraulic folding, grating design) - Ramp control via separate control block, protected at vehicle rear (right) - 2 pairs of folding additional rear supports - Ball hitch coupling + 12V connection Internal vehicle number: 2575 Price NET plus 19% VAT. Attractive financing options available upon request. All information without guarantee. Subject to errors and prior sale.