max. wheel diameter 0 mm
max. number of teeth 0
max. module
min. module
total power requirement kW
weight of the machine ca. t
dimensions of the machine ca. m
Rclty0p7j
CNC controlled milling machine for synchronous rings
Chamfering - and deburring machine Fabr. WIFEX type 25
Technical data:
39jnyunpq
Table top length 250 mm
Table top width 90 mm
Table top height 50 mm
RPM 22000 RPM.
Collet 6.0 mm
Weight 4.5 kg
Power supply 220 V / 50 Hz
Power 320 W
used € 150--
max. wheel diameter 280 mm
max. number of teeth 100
max. module 6
min. module 1
9huhyj0
total power requirement 6 kW
weight of the machine ca. 2500 kg
dimensions of the machine ca. m
max. wheel diameter 400 mm
max. number of teeth 150
max. module 5
total power requirement 16 kW
weight of the machine ca. 10 t
Workpiece Ø, min./max.30 - 400mm
Number of teeth6 - 150
Module range, max.5
Tool holder shaft ØSK 30 / 20
Tool speeds4,000rpm
Spindle drive max. infinitely variable1.8kW
Feeds, longitudinal and cross0.001 - 12m/min
Workpiece speed, max. (1.5 kW) C Axis2,000rpm
Workspindle slide400mm
Tool speed, max.3,000rpm
Tool holderSK 30
Total electrical load, approx.16 kW - 38...
Machine for forming cevapcici and cevapi
I7ddrzkwc
FOD Milling and copling machine. DFPA 40 horizontal profile milling machine
Manufacturer FOD
Model / type of machine. Horizontal profile milling machine DFPA 40
Year of production 1989
Category of machines. Milling and copier
Location
Gorzów Wlkp.
Conditions of delivery
own collection
Cost of delivery
Customer cover
Start type
to be agreed
Description
Comments
Destiny:
The DFPA 40 horizontal milling machine is a universal machine tool with a wide range of applications in the furniture and ...
DRILL AND MACHINE PINS SCHEER BS6101 AUTOMAT WHIT PROGRAMM CNC PC
Hebfczff
Richard Johnson and Nephew Barbed Wire Machine.
Complete with pay off
Refurbished machine and little used since.
Condition is the same as in the video when it was reconditioned by Century Steels.
Comes with wiring diagram, instruction Documents and wooden formers.
Oammf
Link to video can be sent.
According to the website:
"Purpose: Preparing before lacquering, and between first and second coating.
For pre-sanding , sealer-sanding and de-nibbing of flat and profiled items such as kitchen doors, table tops, shutters, profiles, frames etc.
Advantages: High working speed. Limited dust problems.
Delivery: The machine can be delivered with any grit size sanding brushes. Or without any sandpaper or brushes.
2rftq2tx
Function: The 2 spindles are protected with lift-up guard hoods and operate wit...
Fully automatic system for filling prefabricated molded plastic packaging (Unit Dose) for various media.
Fb9cklh
See attachment for models of packaging!
Power:
5,000 liquid packages per hour
depending on the container shape and the
Viscosity of the product.
Dosing range:
1 - 10 ml (depending on the packaging)
The dosing range is set when the machine is at a standstill via the control unit of the dosing pump.
The entire system is constructed according to the requirements of hygienic design an...
Lagernummer 1105-02800
Maschinenart Rundschleifmaschine - Universal
Fabrikat ZIERSCH & BALTRUSCH
Typ URS 751
Baujahr 1982
Steuerungsart konventionell
Lagerort HAGUENAU
Ursprungsland Deutschland
Lieferzeit sofort
Frachtbasis ab Lager
Technische Details
Schleifdurchmesser 270 mm
Schleiflänge 1000 mm
Spitzenhöhe 135 mm
Gesamtleistungsbedarf 7,5 kW
Maschinengewicht ca. 2.8 t
Raumbedarf ca. 3 X 2.7 X 2.5 m
Zusatzinformationen
ZIERSCH & BALTRUSCH
Hydraulische Universal RUNDSCHLEI...
Affordable, unique and compact machine for parquet and engineered wood flooring buffing, wiping and LED UV curing.
Technical Parameters:
Hvnw27x
- Double Buffer diameter - 430 mm
- Adjustable Buffers Height - Yes
- Wiping Brushes Diameter - 2x175 mm
- LED UV Curing Unit - 1.7 kW
- Feeding Speed (Adjustable) - 0-15 m/min
- Wiping Brushes Speed (Adjustable) - 0-900 rpm
- Angle of the Wiping Brushes - Adjustable
- Total Power - 6 kW
- Weight - 280 kg
- Dimensions (mm) - 660(w)x2600(l)x1050(h)
The price starts from 35.000 Euro and it may change according to model. Deburring and Edge Rounding Machine is used steel sheet, stainless steel sheet, galvanized sheet, aluminium sheet for deburring and edge rounding after punch, laser, plasma, oxygen cutting. We also have channel on youtube for sample videos (TFON Machine)
Brygztxasq
Product code of Kamarakis website: KAM-RAF-SPA-001
Crusher and rotary sieving machine (Rafineza)
It has an electric control and operation panel
Crusher input dimension: 380mm x 120mm
Drum length: 1020mm
Diameter of drum: 390mm
Hole diameter: 0.8mm
It has a three-phase motor
The machine is temporarily stored in our premises (BUILDING A)
Immediately available
Bfn8udynzv
For more refurbished, used and new machines from the food industry visit our website: kamarakis-usedmachinery
A fully automated film rewinding machine according to GMP guidelines.
Foil rewinding machine type FUM-900 CP
This film rewinding machine is used to rewind film rolls that have run in large systems or are not wound with the correct winding tension, and thus to prepare them for further processing. It was designed according to the special pharmaceutical guidelines and for the processing of PVC film.
Advantage of our machine: with two separate drives, we can guarantee both right and left winding.
...
Used Rsa deburring machine for sale German made
SPECIFICATIONS
Technical Specifications
Input power 2.6 / 3.2 kW
Speed 1500 + 3000 rpm
Workpiece data
Materials steel, stainless steel, non-ferrous
Lengths 100 mm and up (optionally 35 mm and up)
Work piece shapes: round tubes, shaped sections, solid bar, (optionally sheet metal)
Diameter: up to 90 mm
RASA MONO is one of RSA’s most universal tube deburring machines. It has proved itself worldwide again and again, in all industry sectors and...
diameter -- mm
workpiece length -- mm
work piece width 1350 mm
workpiece height 4 - 150 mm
work height max. 850 mm
grinding band dimension 1400 x 2500 mm
Band Speed 22 m/sec.
feed speeds 3 - 15 m/min
conveyor belt 1350 x 2200 mm
Bu3adrafzp
Required air-pressure 5 - 7 bar
voltage 220 / 380 V
control voltage 220 V
frequency 50 Hz
1,5 m³/sec.
total power requirement 24,5 kW
weight of the machine ca. 2,0 t
suction Dustomat-160S year 2003
Smallest workpiece length: 4 mm
clamping devices hydraulic pneumatic hydraulisch
ca. 5 lfdm x 300 mm
Bkzomrp
hydraulic power unit Rexroth
tank 250 l
diameter of brush 250 mm
width of brush 80 mm
turning speed range 1500 / 3000 U/min
voltage 380 Volt
total power requirement 3,0 kW
weight of the machine ca. 150 kg
dimensions of the machine ca. 700 x 600 x 1150 mm
Furnishing:
- electr. Brush deburring machine
- Support bracket for material
- 2x speeds
- Machine base - mobile
Bl9jxqwyue
Deburring machine, hole deburrer, bore deburrer, deburring device
-Drive: 0.30 kW
-Countersink
-Speed: 585 rpm
2pmafm
-Dimensions: 500/300/H460 mm
-Weight: 31 kg
max. wheel diameter 2800 mm
gear width 1000 mm
max. module 18
min. module 2
max. workpiece weight 4000 kg
workpiece turning speeds 1,11 - 6,66 U/min
2ssdx3
Gear dia. External: min. 1200 mm, max 2800 mm
Gear dia. Internal: min. 1000 mm
Complete datasheet of the machine upon request.
diameter - mm
workpiece length beliebig mm
work piece width 1500 mm
Sanding height max. 100 mm
feed stepless 1 - 5 m/min
Dust suction hood Ø 200, links mm
sanding disc diameter 250 mm
workpiece width - max. 1 - 100 mm
feed speeds 1 - 5 stufenlos / steples m/min
motor 6 x 2,2 KW / 1000 rpm
dimensions of the machine ca. 2,0 x 2,2 x 2,0 m
Heavy deburring and rounding machine with six oscillating transversal
Disc aggregates in working width 1500mm || - 2 disc aggregates infeed side with
each: la...
diameter 90 mm
workpiece length beliebig mm
work piece width beliebig mm
Bürstendurchmesser 250 mm
Bürstenbreite 60 mm
voltage 380 V
frequency 50 Hz
power capacity 3 kW
weight of the machine ca. 0,1 t
dimensions of the machine ca. 1,0 x 0,6 x 1,2 m
M8zbld
This machine is well suited for burring of fore-parts
and side walls,
mounted on machine cupboard,
with accessory parts for short work pieces and plate edges,
max. wheel diameter:300 mm
gear width:100 mm
max. module:5
workpiece turning speeds:0 - 1000 1/min
work piece - max.:1100 mm
workpiece clamping:auto. tension device
number of spindle speeds:1000 1/min.
spindle bearing diameter:100 mm
diameter of spindle flange:120 mm
tailstock travel:80 mm
weight of the machine ca.:3500 KG
dimensions:1200 x 1450 x 2250 mm
total power requirement:10 kVA
The Gear Tooth Deburring machine WERA, ZEM 300 for deburring of splines gear wheels and shafts, with Pointi...
diameter of brush 250 mm
width of brush 80 mm
turning speed range 1500 / 3000 U/min
voltage 380 Volt
total power requirement 3,0 kW
weight of the machine ca. 150 kg
dimensions of the machine ca. 700 x 600 x 1150 mm
Furnishing:
Suomkg
- electr. Brush deburring machine
- with suction
- 2x speeds
- Machine base
F200 XL deburring machine: small parts specialist.
Suited for sheet metal parts between 10 and 200 mm wide. Deburring, grinding and edge rounding at high speed.
The F200 XL is a 3 station finishing machine suited for deburring, grinding and/or edge rounding of flat metal parts. This deburring machine has a grinding belt followed by two stationary brushes, one turning clockwise and the other one counter-clockwise. The grinding belt eliminates burrs or can give the product a line grain finish. Th...
max. wheel diameter 800 mm
gear width 400 mm
max. module 0,5
min. module 20
total power requirement 21 kW
weight of the machine ca. 2,5 t
dimensions of the machine ca. m
Multi-spindle deburring machine with rotary table 2 x 180 °; pitch 760mm; 2
pneumatic chucks ROTA S 3-jaw Ø160mm
Loading and unloading station for the workpiece change manually or
automatically by loading portal.
Station 1:
1 piece special brushing processing unit, mounted on vertical structure
Benx0tmnc3
hydro. pneumat...
filling capacity 100 l
power capacity 0,75 kW
tank shape rund
Cnxfve0z
rotary speed of motor 1500 / 1000 U/min
weight of the machine ca. 0,3 t
dimensions of the machine ca. 1,5 x 1,0 x 1,2 m
Brushing machine / brush deburrer
Dvrxjy
- make Lindemaier, year 1990, power consumption 7,5 kW, dimension: L:1,0 x W:0,80 x H:1,25m, weight approx. 48 kg
- brush size Ø 300 x Ø 50x50mm type K 180
- engine speed 2920 rpm, suction nozzle Ø 180mm
- with blow-off device
Accessories: approx. 15 spare brushes NEW
max. wheel diameter:400 mm
max. module:6
Nkxtd
total power requirement:36 kW
weight of the machine ca.:9 t
dimensions of the machine ca.:2,4 x 2,4 x 3,5 m
max. number of teeth:100
min. number of teeth:7
tool taper:SK30
milling head speed:0-6000 U/min
milling spindle drive:6,6 Nm
no. of strokes:180 Hub/min
Brush deburring machine RSA type DUO
machine. No. 47-1156 Year of construction 1987
Pi9of
brush diameter 250 / 300 mm
brush width approx. 16 - 60 mm
speed 1500 / 3000 rpm.
power 2,4 / 3,7 kW
mains connection 380 Volt, 50 Hz
- with metal base
- equipped with 1 piece deburring brush Ø 300 mm
- equipped with 1 piece flap brush Ø 300 mm
space requirement L x W x H 880 x 400 x 1050 mm
weight 106 kg
good condition
Ref. -No.: 10111
Brand: GRATOMAT
Bw9zoc0aqr
Storage location: Mülheim an der Ruhr
Country of origin: Deutschland
Further information:
Tooth and chain wheel deburring machine Gratomat Type 50 W
diameter 1500 mm
workpiece length 0,8 - 100 mm
Bulaank39z
work piece width 1000 mm
max. wheel diameter 2000 mm
Byjl7s8m
gear width 0 mm
max. module 0
dimensions of the machine ca. 2x1,2x1,5 m
uncomplete machine body with drive motor. drive unit fully functional. Without
grinding unit.
max. wheel diameter:300 mm
gear width:100 mm
max. module:5
workpiece turning speeds:0 - 1000 1/min
work piece - max.:1100 mm
workpiece clamping:auto. tension device
number of spindle speeds:1000 1/min.
spindle bearing diameter:100 mm
diameter of spindle flange:120 mm
tailstock travel:80 mm
weight of the machine ca.:3500 KG
dimensions:1200 x 1450 x 2250 mm
total power requirement:10 kVA
Yr89q0
The Gear Tooth Deburring machine WERA, ZEM 300 for deburring of splines gear wheels and shafts, with...
1 deburring machine, year of construction: 2009, inventory number: 10-1100627-0, control Siemens Sinumerik, with 6-axis robot Kuka, with control KRC and teach panel
Xi8jc
Offer 18127
Technical data:
- Brush diameter 250 mm
- brush width 60 mm
- disc speed 1500 / 3000 rpm
- drive 400 V / 2,2 / 3,0 kW
- Brush depth adjustment
- Support table with V recesses height adjustable
- working height 900 mm
Pkunf
- Space requirement approx. W 720 x H 1150 x D 450 mm
- Weight approx. 180 kg
working width 900 mm
workpiece height 1 - 70 mm
total power requirement 25 kW
workpiece length - min. 400 mm
grinding band dimension 1540 x 900 mm
feed 1 - 4,5 m/min
compressed air 5 bar
work height max. 880 mm
Required air-pressure R 3/8''
weight of the machine ca. 2,8 t
dimensions of the machine ca. 2,6 x 2 x 1,8 m
workpiece weight max 300 kg
Metal Deburring Maschine ERNST EG 3 MII incl.:
Dust extractor and suction for the deburring form steel plates
Pcn27
in the steel construction and ste...
Workpiece size diameter 15 - 250 mm
Dgf723umc
Conveyor belt speed 0.6 - 5 m / min
2 vertical brushes
conveyor belt
Condition like new !!!
The MEWO JET ROTOR M is a very powerful basic drum-type media-blasting de-burring/de-flashing system. It is an ideal introduction for the cryogenic finishing of rubber, plastics and non-ferrous metals from small to medium sized batches. It has a batch volume up to 30 liters. r!
Bni0e80gvs
Brush deburring machine, sheet metal deburring machine, deburring machine,
-Deburring machine for: punching, laser and nibbling parts
-Deburring system for: sheet metal edges with notches
-Drive power: 0.71 kW
Speed: 4500 rpm
-Dimensions: 400/180/H130 mm
Nmtk9
-Weight: 3.5 kg
Offer no. 21210
Technical data:
- Brush diameter 250 mm
- brush width 60 mm
- disc speed 1500 / 3000 rpm
- drive 400 V / 2,2 / 3,0 kW
- Brush depth adjustment
- Support table with V recesses height adjustable
- working height 900 mm
- Space requirement approx. W 720 x H 1150 x D 450 mm
Bxivpgn7rt
- Weight approx. 180 kg
working width -- mm
workpiece height 1 - 70 mm
total power requirement 25 kW
workpiece length - min. 400 mm
workpiece weight max 300 kg
feed 1 - 4,5 m/min
compressed air 5 bar
work height max. 880 mm
Required air-pressure R 3/8''
weight of the machine ca. 2,8 t
dimensions of the machine ca. 2,6 x 2 x 1,8 m
Deburring machine Ernst EG3MII suction for deburring steel plates in
Steel construction and steel trade.
- including suction system
Bu3bvtfw8x
max. wheel diameter:600 mm
max. module:10
min. module:2
total power requirement:1,4 kW
weight of the machine ca.:0,68 t
Bnxhqwb
dimensions of the machine ca.:1,6x0,75 m
max. width of spur gears:140 mm
diameter of hob:15 mm
