Used Bulk for sale (639)

Condition: reconditioned (used), Year of construction: 2000, operating hours: 32,169 h, functionality: fully functional, pressing force: 60 t, filling opening width: 1,100 mm, filling opening length: 1,320 mm, bale width: 1,100 mm, bale height: 720 mm, bale weight: 750 kg, overall weight: 22,000 kg, oil tank capacity: 900 l, For sale is a complete baling system consisting of conveyor technology, baling press (partially refurbished and tested) and wire stations. Technical data baler: Manufacturer Bollegraaf Recycling Machinery B.V. Typ HBC 60A Year of construction 2000 Hours of operation 32,169 hours, stand November 2024 Press power main press 60 tons Press power of pre-press max. 25 tons Feed channel 1,320 x 1,100 mm Theoretic cycle time 18 sec. Bale size 1,100 x 720 mm, lenght variable Driving motor 45 kW Connected load 60 kW Tying system 5-fold vertical Throughput rate at a bulk weight of 30 kg/cbm approx. 5,5 tons/hour bulk weight of 50 kg/cbm approx. 10 tons/hour bulk weight of 100 kg/cbm approx. 16 tons/hour Bale weight 400 up to 750 kg, depends on material SPS controller Telemecanique TSX Micro Machine weight baler approx. 24 tons Scope of delivery: 1 piece chain belt conveyor 1 Bollegraaf HBC 60A baler with whirling unit 1 maintenance platform with access ladder 2 wire stations with deflection rollers for 10 wire reel stands (without wire) The following repair and overhaul work was carried out: Hydraulic oil tank emptied, cleaned and refilled with new oil Oil filter and air filter replaced Hydraulic block partially resealed Hydraulic hose on hydraulic block replaced Wire entry marks on the floor passages welded shut and smoothed Tying unit cleaned, serviced Electrical system repaired, door flap contact switch partially replaced Whirbulator repaired General maintenance work carried out, lubricated Machine tested during operation, without the use of materials, in manual mode and in automatic mode, see function video Comments: Cgjdpfx Ajviwdmscvor The system has already been completely dismantled, stored and is available for loading at short notice. The documentation (BA, CE, electrical/hydraulic circuit diagram) is available. Viewing is possible by appointment. We accept no liability for the technical details or any errors.

Condition: excellent (used), 1 x Tomra Nibus system. With Bulk bag infeed onto a vibration table. Into a bucket elevator feed thie Tomra Nimbus laser sorter for free-fall product and is ideal for processing nuts, grains and seeds, dried fruit, and pet food. Also suitable for IQF meat and veg/fruits. It uses a combination of laser detection and high-resolution cameras to identify and remove defects, discolorations, and foreign materials from products as they fall through the system Cgsdpfx Asygwv Iscvor

Condition: used, Manufacturer : Gericke Model : 150 BS Type: Rotary valve for pneumatic transport Direct connection to pneumatic transport pipes Hopper with level sensor: 20 litres Input/Output: Cgjdpfxsykcamo Acvjr DN1 : Ø60 mm DN2 : Ø75 mm Bearing: air purge

Condition: used, functionality: fully functional, Fully automatic bagging system – completely dismantled and ready for collection For sale is a fully automatic bagging system, suitable for a wide range of bulk materials such as flour, pellets, and granulates. The system impresses with its high degree of automation and robust industrial design. Features and components: - Pneumatic bagging unit - Fully automatic sewing machine for sealing the bags - Rollers for flattening filled bags - Roller conveyors for in-plant transport - Robotic arm for automatic palletizing of the bags - Automatic pallet magazine - All electrical cables and control cabinets have been professionally dismantled The entire system has already been dismantled, neatly stored on pallets, and is ready for immediate collection. Comprehensive electrical documentation with schematics is available. Codpfoyw Rffsx Acvegr Special features: Ideal for industrial applications with high throughput and automated processes. All components are perfectly coordinated, ensuring an efficient packaging and palletizing process. If interested or for further information, we are happy to assist you.

Condition: excellent (used), Screening and sorting machine for bulk materials or small metal components. Very good condition – complete, equipped with original drive, control cabinet, and a set of calibration screens. • Manufacturer: SCHWANOG Günter KG, Villingen / Schwarzwald • Model: RAPID SBM 63G • Year of manufacture: 1972 • Drive: Bauknecht motor 0.55 kW, 380/220 V, 2850 rpm • Control cabinet: Carl Kurt Walther GmbH, Wuppertal • Robust steel construction, stable frame with transport wheels • Power supply: three-phase 400 V • Complete set of screening sieves in wooden frames (numbers 1–6) • Sieve mesh range: from 2 mm to 15 mm • Adjustable and exchangeable screens • Main switch, start/stop controls, and overload protection • Very good condition – dismantled from the plant, mechanically fully functional The machine is ready for operation after a basic inspection. Ideal for: metalworking shops, foundries, industrial laboratories, sorting granulates, sand, or components. Cedpfx Acjxmt Eqovegr

Condition: like new (used), Kemutec KEK Centrifugal sifter Stainless centrifugal sifter, ideal for sifting and screening dry powders and other bulk solids, available with either 4mm or 6mm stainless mesh, 3Ph Codpfxof S I Ads Acvjgr

Condition: like new (used), Grote 613-90 slicer Serial: 1081458 Cgjdsizxfqjpfx Acvjr stainless, variety of slicing applications including bulk slicing, stacking and shingling into portions, ideal for meat, cheese, vegetables, fruits and bread products, up to 90strokes per min, variable slice thickness 0.5mm - 12.7mm, cutting area 330mm x 152mm, with mesh outfeed, 1Ph

Condition: good (used), axle configuration: 3 axles, first registration: 09/2014, loading space volume: 39 m³, total length: 10,200 mm, total width: 2,550 mm, suspension: air, wheelbase: 7,450 mm, Year of construction: 2014, Equipment: ABS, = Additional Options and Accessories = - Central lubrication Cjdpsyntqksfx Acvogr = Notes = 3 compartments, fabric filter steering axle lift axle, aluminum rims = Further Information = Axle configuration Suspension: Air suspension Rear axle 1: Lift axle; Max. axle load: 10,000 kg; Tire tread left: 80%; Tire tread right: 80% Rear axle 2: Max. axle load: 10,000 kg; Tire tread left: 80%; Tire tread right: 80% Rear axle 3: Max. axle load: 10,000 kg; Steered; Tire tread left: 40%; Tire tread right: 40% Weights Unladen weight: 6,560 kg Payload: 38,440 kg Gross vehicle weight: 45,000 kg Functional Body manufacturer: Spitzer Number of compartments: 3 Hoses: Yes Condition Technical condition: good Visual condition: good Further information Please contact Andre, Henri, or Andre for more information.

Condition: excellent (used), Year of construction: 2012, Lock met 30+ Throat / Vertical Fall Metal Detector The MET 30+ UNIVERSAL compact vertical fall system can be installed at the beginning of the production line to inspect materials in bulk powder or granule form or anywhere for free falling products. • Detects real-life contaminants • ATEX zone 21 approved • Throughput up to 50 tonnes per hour • Quick release sealed valve or cowbell reject mechanisms available • Sealed to IP 66 for washdown applications Cgodpfx Aou Dntljcvjr

Condition: used, Year of construction: 2009, machine/vehicle number: PR22, Used injection molding machine H160 - 2009Technical Specifications & Performance DataThis Husky injection molding machine is engineered for high-efficiency cap and closure production, making it an excellent choice for beverage production environments that require consistent, high-quality outputs. Manufactured in 2009, the unit features a 160-ton clamp force platform paired with a 24-cavity cap mold optimized for 29/25 mm neck finishes. It is supplied with robust auxiliary equipment to stabilize process conditions and streamline operation in an industrial packaging workflow.Manufacturer: Husky Injection Molding SystemsModel: H160 RS45/42Year: 2009Application: Cap/closure molding for beverage packagingMold cavitation: 24 cavitiesClosure specification: 29/25 mm, Free Start CapNominal part weight: 1.20 g (cap)Clamp force: 160 tonsElectrical supply: 400 V, 50 Hz, 3PH+N+PEMain supply current: 101 ALargest motor load: 42 ALargest heat load: 31 AShort-circuit current rating (SCCR): 10 kAIncluded equipment: Altanium heater controller, mold dehumidifier, hopper loader, color mixer unit, available spare partsAdvanced Automation & Control SystemsThe machine is equipped with an Altanium heater controller to deliver precise thermal management across the hot runner zones. This tight temperature control promotes uniform melt flow, faster startups, and reduced scrap, vital for thin-wall cap molding. The industrial control panel supports a 3-phase + neutral + protective earth electrical system, with clearly defined load ratings for motors and heating circuits to facilitate safe integration and predictable operation.Precision heater control with Altanium technologyClearly rated electrical distribution for motors and heatersStable process conditions for consistent cap qualityDesigned for quick setup and repeatable mold changeoversProduction Line Integration CapabilitiesThis unit integrates seamlessly into cap and closure production cells serving a used bottling line or standalone cap manufacturing operations. It can feed downstream systems such as vision inspection, lining/printing, and bulk handling for PET bottle closures. The 29/25 mm specification aligns with common beverage packaging neck finishes, supporting high-throughput operations in industrial packaging environments.Standalone or inline operation with downstream handlingCompatible with PET bottle packaging for beverage productionAuxiliaries included to stabilize material handling and color dosingMachine Condition & Maintenance HistoryThe machine is indicated as still in production, reflecting ongoing operational status and functional readiness. The inclusion of a comprehensive set of available spares and auxiliary units supports routine maintenance, uptime, and rapid troubleshooting typical of second hand i... Cedpfoyhbdxex Acvjgr

Condition: new, functionality: fully functional, color: red, empty load weight: 360 kg, maximum load weight: 1,000 kg, Year of construction: 2026, machine/vehicle number: 500 XX XXX, Orange Peel Grapple P-3M Orange peel grapple P-3M with six tines is made of highly durable materials and is designed for handling wood chips, municipal waste, stone and other bulk or loose materials. Suitable for use with excavators and cranes. For operation, two connections are required crane rotator and rotator grapple, while for manual rotation only one connection is required. Technical data: -Number of tines: 6 -Closed volume: 250 L -Capacity: 1000 kg -Flange: 4 holes standard, 6 holes optional Cgodpfsgz Hv Njx Acvor Additional equipment: -Rotator -Linkage

Condition: used, empty load weight: 5,820 kg, maximum load weight: 27,180 kg, overall weight: 39,000 kg, axle configuration: 3 axles, first registration: 04/2011, suspension: air, tire size: 385/65R22,5, Ardor SVM, Eboli, silo trailer | Year of manufacture: 2011 | Total capacity: 32,000 liters | 3 compartments | BPW axles with disc brakes | Spare wheel holder | Austrian vehicle | Subject to errors, input mistakes, and prior sale. Cgodpfx Aceyvik Dsvsr

Condition: ready for operation (used), functionality: fully functional, A good used Hopper Feeder fopr feeding small parts into assembly machine or feeding a bowl feeder with bulk parts - stainless steel conveyor - flighted belt (comes with a second spare belt also) - three phase geared drive unit - 24 V DC sensors (2) for control of belt index if required Cgedpfew D Ev Eox Acvsr Ready to ship worldwide More pictures and videos available upon request

Condition: excellent (used), Year of construction: 2014, operating hours: 8,900 h, machine/vehicle number: LP50VH2, 1) Technical specifications Press with conveyor Technical data baler: Manufacturer Presona Typ LP 50 VH2 Year of construction 2014 Press power main press 50 tons Specific press force 63 N/cm2 Feed channel 1,500 x 1,100 mm Filling volume 2,7 m3 Theoretic throughput capacity 730 m3/hour Throughput capacity under operating conditions 340 m3/hour Bale size 1,100 x 720 mm, lenght variable Drive power 45 kW Tying system 5-fold, vertical, fully automatic Throughput capacity at a • bulk weight of 30 kg/cbm 8 up to 10 tons/hour • bulk weight of 50 kg/cbm 11 up to 13 tons/hour • bulk weight of 100 kg/cbm 15 up to 22 tons/hour Cgjdpsyrhi Njfx Acvsr Bale density (paper, newspaper) 400 up to 550 kg/m3 Filling volume hydraulic oil tank 600 l Weight baler 16 tons netto Scope of delivery: Press, electrical cabinet, control panel, chain conveyor The documentation (operating manual, CE declaration, electrical/hydraulic diagram) is complete. Visiting is possible by appointment. We are not responsible for technical information or any errors. Upon request, we can send video materials of the working press

Condition: used, maximum load weight: 29,155 kg, overall weight: 34,000 kg, axle configuration: 3 axles, first registration: 09/2006, next inspection (TÜV): 10/2026, total width: 2,550 mm, total height: 3,980 mm, Year of construction: 2006, Equipment: ABS, 3-Axle Spitzer Silo Trailer VIN: S11563 Chassis / Attachments: * Air suspension / raise + lower function * 1st axle lift axle * Haacon landing gear * Alcoa aluminum rims Cgsdpfxoyumbpj Acvor * Tires: 385/65 R 22.5 * Remaining tire tread: 1=30/80%, 2=50/60%, 3=20/80% * 3 x BPW Eco Plus axles with disc brakes * 1 x PVC storage box Superstructure: * Silo trailer for bulk goods * Volume: approx. 39 m³ * Catwalk with pneumatic railing * Fixed rear ladder * 5 x hose containers * 3 x manhole covers * 2 x “Udder” shaped discharge bins * Loading and pressure gauges Weights: * Gross weight: 34,000 kg * Payload: 29,155 kg * Unladen weight: 4,845 kg Other: * German registration * Roadworthiness Inspection 10/2026 -- Safety Inspection 03/2027 New inspections, safety checks, or weight reductions/increases can be arranged upon request. We are glad to assist you with export/temporary license plates, as well as the transfer of your purchased vehicles within Germany. Contact us! ---- We speak the following languages: German, English, and Russian! ---- No liability for typographical and printing errors, subject to changes, prior sale, and mistakes! ---- Who are we? Leible Commercial Vehicles is a family-run business based in Kehl am Rhein. With our years of experience in the preparation and distribution of commercial vehicles, we are a reliable partner for customers worldwide. The particular strength of Leible Commercial Vehicles lies in the sale of new and used commercial vehicles. On our 11,000 sqm site you will find a wide variety of vehicles. Our company philosophy is marked by fairness and integrity. Since customer satisfaction is very important to us, we offer our clients an excellent comprehensive service package and assign a competent contact person who will guide them through the buying or selling process. See for yourself! Our services for you: Loading of vehicles We are happy to help you load your purchased vehicles. Arranging special transports We are pleased to assist you with organizing special transports. Temporary/export license plates We assist you in obtaining export or temporary license plates. Customs clearance services We are happy to support you with customs procedures.

Condition: new, Year of construction: 2026, operating hours: 12 h, functionality: limited functionality, Ezystack Stockpiling Conveyor R6536 TR with tracked chassis, slewing via wheel drive. Equipment: Wired and radio remote control Weight: approx. 9,000 kg Transport dimensions: 12,036 x 2,350 x 2,519 mm (L x W x H) Cgsdpfx Acsyk S T Novjr Drive motor / power: CAT 1.7 / 36 kW Discharge height: 7,952 mm Belt width: 900 mm Belt length: 18,530 mm

Condition: used, maximum load weight: 29,200 kg, overall weight: 34,000 kg, axle configuration: 3 axles, first registration: 09/1997, next inspection (TÜV): 08/2023, Equipment: ABS, * ABS * Alloy wheels * Front landing gear * Steering axle * BPW ECO axles * 5-chamber tail lights ----Construction: cement silo trailer (for granular and dusty goods), capacity: 40,000 ltr, next external inspection 11/24, next internal inspection 11/25, max. permissible pressure 2.0 bar, permissible temperature min/max -40/+80 degrees, 4 sliding dome covers with pneumatic locking, 2 outlets lockable, 4 inch material line collected to the left----3rd axle steering axle Sale only to traders. FOR EXPORT ONLY THE NET PRICE IS TO BE PAYED !!!!! ALL INFORMATION IS WITHOUT GUARANTEE. EQUIPMENT + ACCESSORIES.The basis of all purchase contracts, invoices, pro forma invoices, orders and sales talks are our general terms and conditions (see legal notice). Cgjdeu I H D Repfx Acvor

Condition: used, Tipping container, tipping skip for forklift trucks Chip container – bulk tipping skip – folding container Load capacity: approx. 1000 kg Volume: 1 m³ Entry brackets: 230 x 110 mm Fork spacing inside: 160 mm Fork spacing outside: max. 600 mm - Fork entry pockets – entry brackets for transport and emptying by forklift or pedestrian pallet truck - Manual tipping mechanism via hand lever - 4 heavy-duty plastic fixed castors Ø 175 mm, 2 of which are swivel castors - Foldable tow bar Dead weight: 220 kg Length: 1700 mm Codpjhly Ifefx Acvogr Width: 1060 mm Height: 1500 mm Very good condition Suitable for collecting, storing and transferring recyclable materials

Condition: used, Slide belt magnetic conveyor, magnetic slide conveyor DGS System GmbH Z-conveyor, sliding belt conveyor, conveyor belt, magnetic belt conveyor Cgsdpfx Acoi Huzxsver Type no.: MBF 326P31,75 Com. no.: 44489-10 Year of construction 2017 Slide width 300 mm Distance between permanent magnets 250 mm Insertion length approx. 3400 mm (up to body box) Slide-in length approx. 3900 mm (without superstructure box) Slide-in height 210 mm Insertion width housing 370 mm Insertion width threaded mounts for adjustable feet 410 mm Insertion width at body box 470 mm Conveying height - discharge height approx. 1040 mm Conveyor speed approx. 2 meters/min. Motor power belt drive 0.37 kW Mains connection 400 Volt, 50 Hz - Circulating chain equipped with permanent magnets Space requirement L x W x H 5200 x 700 x 1500 mm Weight 410 kg Very good condition

Condition: excellent (used), Mogensen 5 deck screen Type 1066 Capacity depending on material approx. 20-25 t/h Cgsdpfx Aoyr Ntijcver Bulk density approx. 2.8 t/m³

Year of construction: 2019, condition: ready for operation (used), A complete Respecta epoxy resin metering and casting system is available. 1) Big bag station for supplying fillers, max. particle size: 0.7mm, max. bulk density: 0.5g/cm³. 2) Two IBC connections for liquid components A and B with diaphragm pumps. 3) Two buffer tanks for A and B, volume: approx. 230l. Including level sensors and automatic IBC filling. 4) Volumetric metering to the mixing screw with flow meter and pressure monitoring. 5) Degassing unit. 6) Continuous epoxy resin inline heater with process monitoring of the resin temperature and the epoxy hardener, viscosity range: approx. 350-450mPas, max. epoxy resin temperature: 20°C. 7) Semi-automatic flushing and cleaning unit for the casting unit, volume: approx. 50l. Overall system control: Siemens Simatic S7, additional controls: control cabinets/frequency converters/industrial PC, overall system casting capacity: approx. 30l/min. The system allows mechanical preparation for retrofitting up to 3 additional filler metering systems. It is recommended to renew the lines and the diaphragm pumps before commissioning. Documentation available. An on-site inspection is possible. Codpfx Acjyt N A Hevjgr

Year of construction: 2014, condition: ready for operation (used), A Morgensen vibrating screening machine for screening bulk materials in the building materials industry is available. Working width: 1000mm, screen decks: 4, vibration motor pole count: 6, screen length per deck: 2400mm, total screening area: approx. 9.6m². Documentation available. An on-site inspection is possible. Codpfjyt N A Tjx Acvsgr

Condition: new, functionality: fully functional, Year of construction: 2026, Dear Sir or Madam, We invite you to review our offer. Quantity discounts are available for bulk purchases of multiple containers. ▪ Fittings for hooklift systems according to DIN 30722-1, with rear external rollers and subframe made from INP 180 External rollers are greaseable and can be replaced ▪ Lifting bar Ø 50 mm, hook height 1,570 mm ▪ Container floor made of 5 mm St 37.2 (S235JR) steel ▪ Side walls made of 3 mm St 37.2 (S235JR) steel ▪ Corner between floor and side wall rounded ▪ Rib spacing 750 mm ▪ Rib profile U 80 x 50 mm ▪ End profile made from sturdy round tube Ø 90 mm ▪ Double-wing rear doors with Dutch door lock and side-mounted safety central locking compliant with UVV safety standards ▪ Door lock with container door opening assist ▪ All-round tarpaulin and net hooks ▪ Galvanized safety ladder at front in accordance with UVV ▪ Container primed inside and out, exterior painted in a single RAL color of your choice ▪ Warning stickers Csdpfxoyybvtj Acvogr ▪ Container inspected and approved in accordance with DGUV regulations Various configuration options available to customize the container to your specific requirements. We invite you to request a personalized offer.

Condition: new, functionality: fully functional, Year of construction: 2026, Dear Sir or Madam, We invite you to review our offer. Quantity discounts are available for bulk purchases of multiple containers. ▪ Fittings for hooklift systems according to DIN 30722-1, with rear external rollers and subframe made from INP 180 External rollers are greaseable and can be replaced ▪ Lifting bar Ø 50 mm, hook height 1,570 mm ▪ Container floor made of 5 mm St 37.2 (S235JR) steel ▪ Side walls made of 3 mm St 37.2 (S235JR) steel ▪ Corner between floor and side wall rounded Cjdpfx Aoyybu Necvogr ▪ Rib spacing 750 mm ▪ Rib profile U 80 x 50 mm ▪ End profile made from sturdy round tube Ø 90 mm ▪ Double-wing rear doors with Dutch door lock and side-mounted safety central locking compliant with UVV safety standards ▪ Door lock with container door opening assist ▪ All-round tarpaulin and net hooks ▪ Galvanized safety ladder at front in accordance with UVV ▪ Container primed inside and out, exterior painted in a single RAL color of your choice ▪ Warning stickers ▪ Container inspected and approved in accordance with DGUV regulations Various configuration options available to customize the container to your specific requirements. We invite you to request a personalized offer.

Condition: used, fuel type: gasoline, empty load weight: 8 kg, color: grey-black, gearing type: mechanical, Year of construction: 2025, TITLE: NEW 5-TINE GRAPPLE FOR SCRAP AND BULK MATERIAL HANDLING WITH INTEGRATED ROTATOR Cgsdpfx Acjxzlzmever REF.: 25-ATT-06 YEAR: 2025 MODEL: PM 5 200R SERIAL NO.: 022525 WEIGHT: 420 kg CAPACITY: 2500 kg VOLUME: 210 l Subject to errors and/or omissions The listed prices do not include VAT. Please contact our sales department for up-to-date price and condition information. For further information: Loris: 3484773001 URL: #glispecialistidelloscarrabile SCARRABILI AURORA Operates in the sale and purchase of industrial and commercial vehicles, with a primary focus on the waste management sector. Specialists in trucks, trailers, and hooklift equipment. We have a fleet ready for immediate delivery comprising over 50 trucks and more than 150 containers, hooklift bins with and without cranes. E&OE Due to the quantity of ads and information listed, Aurora recommends verifying the accuracy of all details with our sales staff.