Used Bulk for sale (655)

Condition: new, mileage: 1 km, power: 290 kW (394.29 HP), fuel type: diesel, tire size: 315/80R22.5, axle configuration: 8x4, wheelbase: 4,550 mm, fuel: diesel, fuel tank capacity: 290 l, color: white, driver cabin: day cab, number of gears: 12, emission class: euro3, suspension: steel, loading space volume: 20 m³, Year of construction: 2025, Equipment: ABS, air conditioning, fog lights, = Additional options and accessories = - Leaf suspension - Radio/CD player - Side skirts = Remarks = The Mercedes-Benz Arocs 4140K 8x4 Meiller tipper is a powerful, robust, and versatile tipper truck specifically designed for heavy-duty transport in construction and mining. With its powerful engine, high payload capacity, and reliable Meiller tipper body, this vehicle is ideal for transporting large volumes of earth, sand, stones, or other bulk materials. Technical data Mercedes-Benz Arocs 4140K 8x4 Meiller tipper: - Drive: 8x4 configuration for optimal stability and traction. Itedpfx Agsx Nnu Ie Uob - Permissible gross weight (GVW): 41 tonnes, suitable for extremely heavy loads. - Axle configuration: Twin driven rear axles. - Suspension: Reinforced suspension for heavy-duty use. - Wheelbase: Optimized for agility and stability under heavy loads. - Engine: 12.8-liter inline 6 Euro 3 diesel engine, 394 hp (294 kW), 1900 Nm torque. - Transmission: PowerShift3 automatic transmission with off-road mode for maximum control. - Axle loads: 2x front axle 7.5T, 2x rear axle 13.4T. - Clutch: Twin-plate clutch. - Tyres: 315/80 R 22.5. Meiller tipper body: - Classic rear tipper H436, 20 cbm, HARDOX floor. - Type: Rear tipper body, ideal for bulk material transport. - Volume: 20 m³ load capacity. - Material: Wear-resistant steel for enhanced durability. - Hydraulics: Meiller high-performance hydraulic system for efficient unloading. - Safety: Automatic locking system and stabilizer for safe operation even on uneven terrain. Advantages: - Effortless transport of large quantities of material with a GVW of 41 tonnes. - The engine is designed for efficiency even under high loads. - Robust design and high ground clearance for off-road use. - Simple and intuitive tipper operation from the cab. Areas of application: The Mercedes-Benz Arocs 4140K 8x4 Meiller tipper is ideal for: - Construction projects: Transporting earth, sand, gravel, or construction debris. - Mining: Hauling heavy stones and ores. - Infrastructure works: Delivering materials such as asphalt and building supplies. DIMENSIONS: L. 8282MM | W. 2500MM | H. 3700MM (WEIGHT 16,000KG) Meiller tradition: Meiller tippers have been produced in Germany for over 170 years and are known for their reliability and innovation in the construction industry. Strong under extreme conditions: The Arocs 4140K has been tested under the toughest construction and mining conditions—ranging from deserts to quarries—and consistently delivers outstanding performance. = Further information = General information Year of manufacture: 2025 Technical information Engine displacement: 12,800 cc GVW: 41,000 kg Axle configuration Tyre size: 315/80R22.5 Brakes: Disc brakes Suspension: Leaf suspension Front axle 1: Steered Front axle 2: Steered Functional Body manufacturer: Meiller Tipping: Rear

Condition: new, mileage: 1 km, power: 290 kW (394.29 HP), fuel type: diesel, tire size: 315/80R22.5, axle configuration: 8x4, wheelbase: 4,550 mm, fuel: diesel, fuel tank capacity: 290 l, color: white, driver cabin: day cab, number of gears: 12, emission class: euro3, suspension: steel, loading space volume: 20 m³, Year of construction: 2025, Equipment: ABS, air conditioning, fog lights, = Additional Options and Equipment = - Leaf suspension - Radio/CD player - Side skirts = Notes = The Mercedes-Benz Arocs 4140K 8x4 Meiller tipper is a powerful, robust, and versatile tipper truck specifically engineered for heavy-duty transport in the construction and mining sectors. With its strong engine, high payload capacity, and reliable Meiller tipper body, this vehicle is ideally suited for transporting large volumes of earth, sand, stones, or other bulk materials. Technical Data Mercedes-Benz Arocs 4140K 8x4 Meiller Tipper: Itedpex Nnuzofx Ag Usb - Drive: 8x4 configuration for optimal stability and traction - Permissible gross weight (GVW): 41 tons, suitable for extremely heavy loads - Axle configuration: Double-driven rear axles - Suspension: Reinforced suspension for intensive use - Wheelbase: Optimized for maneuverability and stability under heavy-duty operations - Engine: 12.8-liter inline-6 Euro 3 diesel engine, 394 hp (294 kW), 1,900 Nm torque - Transmission: PowerShift3 automatic transmission with offroad mode for maximum control - Axle loads: 2x front axles 7.5T, 2x rear axles 13.4T - Clutch: Twin-disc clutch - Tyres: 315/80 R 22.5 Meiller Tipper Body: - Classic rear tipper H436, 20 m³, HARDOX floor - Type: Rear tipper body, ideal for bulk material transport - Capacity: 20 m³ load volume - Material: Wear-resistant steel for increased durability - Hydraulics: Meiller high-performance hydraulic system for efficient unloading - Safety: Automatic locking system and stabilizer for safe operation even on uneven terrain Advantages: - Effortless transport of large quantities of material with a GVW of 41 tons - Engine designed for efficiency even under heavy loads - Robust construction and high ground clearance for off-road use - Simple, intuitive tipper control from the driver's cab Fields of Application: The Mercedes-Benz Arocs 4140K 8x4 Meiller tipper is ideal for: - Construction projects: Transporting earth, sand, gravel, or construction debris - Mining: Transporting heavy rocks and ores - Infrastructure works: Delivery of materials such as asphalt and building supplies DIMENSIONS: L. 8,282 mm | W. 2,500 mm | H. 3,700 mm (WEIGHT 16,000 kg) Meiller Tradition: Meiller tippers have been produced in Germany for over 170 years and are renowned for their reliability and innovation in the construction industry. Outstanding in Harsh Conditions: The Arocs 4140K has been tested under the toughest construction and mining conditions—from deserts to quarries—and consistently delivers outstanding performance. = Further Information = General Information Year of manufacture: 2025 Technical Information Engine displacement: 12,800 cc GVW: 41,000 kg Axle configuration Tyre size: 315/80R22.5 Brakes: Disc brakes Suspension: Leaf suspension Front axle 1: Steered Front axle 2: Steered Functional Body brand: Meiller Tipper: Rear

Condition: new, mileage: 1 km, power: 290 kW (394.29 HP), fuel type: diesel, tire size: 315/80R22.5, axle configuration: 8x4, wheelbase: 4,550 mm, fuel: diesel, fuel tank capacity: 290 l, color: white, driver cabin: day cab, number of gears: 12, emission class: euro3, suspension: steel, loading space volume: 20 m³, Year of construction: 2025, Equipment: ABS, air conditioning, fog lights, = Additional Options and Equipment = - Leaf suspension - Radio/CD player - Sideskirts = Notes = The Mercedes-Benz Arocs 4140K 8x4 Meiller tipper is a powerful, robust, and versatile dump truck, specifically designed for heavy-duty transport in the construction and mining sectors. With its strong engine, high payload capacity, and the reliable Meiller tipper body, this vehicle is ideal for transporting large quantities of earth, sand, stone, or other bulk materials. Technical specifications Mercedes-Benz Arocs 4140K 8x4 Meiller Tipper: - Drive: 8x4 configuration for optimum stability and traction. - Gross vehicle weight (GVW): 41 tons, suitable for extremely heavy loads. - Axle configuration: Twin driven rear axles. - Suspension: Reinforced suspension for intensive applications. - Wheelbase: Optimized for maneuverability and stability in heavy-duty operations. - Engine: 12.8-liter inline 6 Euro 3 diesel engine, 394 hp (294 kW), 1900 Nm torque. - Transmission: PowerShift3 automatic with off-road mode for maximum control. - Axle loads: 2x front axle 7.5T, 2x rear axle 13.4T. - Clutch: Twin-disc clutch. Itedsx Nnuuspfx Ag Ujb - Tires: 315/80 R 22.5. Meiller Tipper Body: - Classic rear tipper H436, 20 cbm, HARDOX floor. - Type: Rear tipper body, ideal for bulk material transport. - Volume: 20 m³ loading volume. - Material: Wear-resistant steel for increased durability. - Hydraulics: Meiller high-performance hydraulic system for efficient unloading. - Safety: Automatic locking system and stabilizer for safe operation even on uneven terrain. Advantages: - Effortless transport of large quantities of material with a GVW of 41 tons. - The engine is designed for efficiency even under heavy loads. - Robust construction and high ground clearance for off-road use. - Simple and intuitive tipper operation from the driver’s cab. Fields of Application: The Mercedes-Benz Arocs 4140K 8x4 Meiller tipper is ideal for: - Construction projects: Transporting earth, sand, gravel, or construction debris. - Mining: Hauling heavy rocks and ores. - Infrastructure works: Delivery of materials such as asphalt and building materials. DIMENSIONS: L. 8282MM | W. 2500MM | H. 3700MM (WEIGHT 16,000KG) Meiller Tradition: Meiller tippers have been manufactured in Germany for over 170 years and are renowned for their reliability and innovation in the construction industry. Strong in extreme conditions: The Arocs 4140K has been tested under the toughest construction and mining conditions — from deserts to quarries — and consistently delivers outstanding performance. = Further Information = General Information Year of manufacture: 2025 Technical Information Engine displacement: 12,800 cc GVW: 41,000 kg Axle Configuration Tire size: 315/80R22.5 Brakes: Disc brakes Suspension: Leaf suspension Front axle 1: Steered Front axle 2: Steered Functional Body brand: Meiller Tipper: Rear

Condition: new, power: 180 kW (244.73 HP), fuel type: diesel, fuel: diesel, color: white, gearing type: mechanical, number of gears: 6, emission class: euro3, loading space length: 80,000 mm, loading space width: 25,600 mm, loading space height: 36,000 mm, Year of construction: 2024, Equipment: crane, The Mercedes-Benz Atego 1725 A 4x4 flatbed truck with Hyva HB120 crane is a robust and versatile commercial vehicle, designed for use in demanding operational environments. This truck is ideal for applications in construction, mining, agriculture, or infrastructure projects where on-site loading and unloading are essential. KEY FEATURES: - ENGINE: Equipped with a powerful 6-cylinder engine delivering 245 HP (180 kW). The Atego 1725 A provides ample power for both heavy-duty transportation and crane operations on the job site. - DRIVELINE: Featuring selectable all-wheel drive, high ground clearance, and reinforced suspension, this truck is fully prepared for off-road use, even in the toughest conditions. - OFF-ROAD TIRES: Thanks to all-terrain tires and 4x4 drive, the Atego reliably reaches its destination, whether through mud, sand, or rough terrain. BODY: FLATBED WITH HYVA HB 120 CRANE Flatbed - Steel loading platform with anti-slip surface - Perimeter lashing points for secure load securing - High payload capacity, suitable for heavy equipment and bulk materials - 360° fold-down sidewalls for easy loading and unloading Hyva HB 120 Crane - Mounted behind the cab - Max. lifting capacity approx. 12,000 kg - Max. hydraulic outreach approx. 12 meters - Hydraulic extension sections - Outriggers for stable crane operation - Manual control panel The Mercedes-Benz Atego 1725 A 4x4 flatbed with crane is ideal for professionals in: - Construction & Infrastructure: On-site loading and unloading of building materials. - Mining: Supporting the transport and installation of components. - Agriculture: Suitable for moving machinery, livestock feed, and containers over muddy or uneven ground. - Public services & aid organizations: Rapid deployment for disaster relief and reconstruction projects. Itedpsxnbpyjfx Ag Usb = Further Information = General information Year of manufacture: 2024 Transmission Transmission: G 85-6/6.7-0.73, 6-speed manual gearbox Functional Mast: Telescopic Mast length: 1.213 m Lifting capacity: 12,000 kg Body make: Hyva HB120 Condition Overall condition: very good Technical condition: very good Visual condition: very good Damage: none

Condition: used, overall weight: 37,000 kg, first registration: 03/2005, - Lift axle - Top condition - 37 m³ Isdox Uvztspfx Ag Ustb

Condition: used, Flowveyor Powder intake cabinet with cable conveyor Tube diameter: 76 mm Iodpfxsx Nzzbs Ag Ustb Total length: 4600 mm Motor power: 2.2 kW Plastic-coated cable (food-grade) See our other listings VMA Wekerom

Condition: used, Entecon conveyor flowveyor cable conveyor aerodynamic transport Tube diameter: 76.1 mm Itodpfxjx Nymcs Ag Usb Completely stainless steel Total length: 4300 mm In very good condition See our other listings VMA Wekerom

Condition: used, Stainless steel dosing screw, pipe screw, auger Diameter: 150 mm Itjdsx Nykhjpfx Ag Ujb Motor power: 1.1 kW, 148 rpm Entirely stainless steel See our other listings VMA Wekerom

Condition: used, Stainless Steel Vibrating Chute Dimensions: 800x220 mm Iedpfxex Nygis Ag Uotb See our other listings VMA Wekerom

Condition: used, axle configuration: 3 axles, first registration: 09/2014, total length: 13,200 mm, total width: 2,550 mm, total height: 3,850 mm, suspension: air, tire size: 385/65R22,5, color: other, Year of construction: 2014, Equipment: ABS, = Additional Options and Accessories = - EBS - Alloy wheels Ijdpjw Dngyjfx Ag Uotb = Remarks = Number of axles: 3, unladen weight: 6,450 kg, gross weight: 40,000 kg, chassis material: aluminium, kingpin size: 2 inch, alloy wheels, suspension type: full air suspension, ABS, EBS, body year: 2014, body material: aluminium, drum volume: 60, drum volume in: m³, number of compartments: 1, cargo type: silo, axle type: SAF = Further Information = General information Cab: Day cab Registration number: KLEYN1 Driveline Fuel type: Diesel Transmission Transmission: Manual gearbox Axle configuration Tire size: 385/65R22.5 Brakes: Disc brakes Suspension: Air suspension Axle 1: Lift axle; tire tread left: 4 mm; tire tread right: 6 mm Axle 2: tire tread left: 13 mm; tire tread right: 13 mm Axle 3: tire tread left: 8 mm; tire tread right: 7 mm Weights Unladen weight: 6,450 kg Payload: 33,550 kg Gross vehicle weight: 40,000 kg Functional Number of compartments: 1 Environment Emission class: Euro 0 Condition General condition: average Technical condition: average Optical condition: average Damages: none = Company Information = Kleyn Trucks is one of the world’s largest independent dealers in used vehicles. Here you can choose from a constantly changing stock of 1,200 used trucks, tractor units, and trailers. Our range includes all European makes, years of manufacture, and price ranges. Why buy from Kleyn Trucks? It's simple: • Large, fast-changing inventory • Recognizable quality • Good prices • Proper business conduct • We speak many languages • We understand our customers • Assistance with import and transport • (Export) license plates arranged quickly • Expert technical services • The security of ‘recognizable quality’ • And much more… Please visit our website for special offers and our complete stock. Leasing with Kleyn Trucks is possible in most European countries! Quickly calculate your leasing rate and send a request via our website. Ask directly for our European warranty package.

Condition: used, axle configuration: 3 axles, first registration: 09/2014, total length: 13,200 mm, total width: 2,550 mm, total height: 3,850 mm, suspension: air, tire size: 385/65R22,5, color: other, Year of construction: 2014, Equipment: ABS, = Additional Options and Equipment = - EBS = Notes = Number of axles: 3, Kerb weight: 6,450 kg, Gross weight: 40,000 kg, Chassis type: Full chassis, Chassis material: Aluminum, Kingpin size: 2 inch, Suspension type: Full air suspension, ABS, EBS, Body year of manufacture: 2014, Body material: Aluminum, Drum volume: 60, Drum volume unit: m3, Number of compartments: 1, Type of load: Silo, Axle type: SAF, Spare wheel = Further Information = General Information Cab: Day cab Registration number: KLEYN1 Driveline Fuel type: Diesel Transmission Gearbox: Manual gearbox Axle Configuration Tyre size: 385/65R22.5 Brakes: Disc brakes Suspension: Air suspension Axle 1: Lift axle; Left tyre tread: 5 mm; Right tyre tread: 7 mm Axle 2: Left tyre tread: 9 mm; Right tyre tread: 14 mm Axle 3: Left tyre tread: 8 mm; Right tyre tread: 8 mm Weights Unladen weight: 6,450 kg Payload: 33,550 kg Gross vehicle weight: 40,000 kg Functional Number of chambers: 1 Environment Emission class: Euro 0 Maintenance APK (General Technical Inspection): valid until 04.2026 Condition General condition: average Technical condition: average Visual condition: average Damages: none = Company Information = Kleyn Trucks is one of the world’s largest independent dealers in used vehicles. Here you can choose from a constantly changing stock of 1,200 used trucks, tractors, and trailers. Our portfolio includes all European brands, years of manufacture, and price ranges. Why buy from Kleyn Trucks? Simple! • Large, fast-changing inventory • Recognizable quality • Good pricing • Proper business practices • We speak many languages • We understand our customers • Assistance with import and transport • (Export) license plates arranged quickly Itjdpfxow Hw Dao Ag Ujb • Skilled technical services • The assurance of 'recognizable quality' • And more… Please visit our website for special offers and a complete stocklist: Leasing through Kleyn Trucks is possible in most European countries! Quickly calculate your leasing rate and send a request via our website. Ask directly about our European warranty package.

Condition: ready for operation (used), Year of construction: 2016, Liebherr Material Handler LH 50 M – Data Sheet Technical Specifications – LH 50 M Industry Litronic Feature Value / Range Reach up to 18 m Operating weight 40,000 – 43,500 kg Engine power (ISO 9249) 155 kW / 211 hp System output 269 kW Emission standard Stage V Multi-shell grab capacity 0.40 – 1.10 m³ Bulk material grab capacity 1.20 – 3.50 m³ Timber grab capacity 1.00 – 1.90 m² Technical Specifications – LH 50 M Timber Litronic Feature Value / Range Operating weight approx. 40.3 t Transport height 3.98 m Transport width 3.60 m Transport length 10.4 m Reach (boom) approx. 10.6 m Digging depth 4.0 m Inner turning radius 2.434 m Outer turning radius 5.969 m Travel speed 20 km/h Engine Liebherr D934, 4-cyl., 170 kW, 7.0 l displacement Ijdoxfwtpepfx Ag Ustb

Condition: used, functionality: fully functional, fuel type: diesel, empty load weight: 12,750 kg, lifting height: 3,400 mm, Year of construction: 2008, operating hours: 12,056 h, total length: 7,600 mm, construction height: 3,160 mm, drive type: Diesel, load capacity: 8,816 kg, construction width: 2,400 mm, Wheel Loader Condition: Ready for use and fully operational Technical Condition: Very good Front Tyre Type: Pneumatic Front Tyre Size: 17.5R25 Rear Tyre Type: Pneumatic Rear Tyre Size: 17.5-R25 Description: In addition to this Caterpillar model, we have approximately 200 additional heavy-duty forklifts, compact forklifts, standard forklifts, and side loaders available in our Hamburg and Gdansk warehouses. Visit our homepage – sago-online. Lease-purchase and financing on attractive terms are always possible with us. We are also happy to purchase your used equipment outright, even if you do not buy a vehicle from us. Our owner, Mr. Peter Sawitzki, will be pleased to provide you with detailed advice regarding this 924Hz. P.S.: Our forklift master workshop specializes in the repair, maintenance, overhaul, and custom builds of forklifts from 8 tons upwards. We are also happy to offer your vehicle for sale on commission in our facility. Bulk material bucket, Iodpfsx I S Suex Ag Ustb Bulk material bucket: width: 2500 mm; height: 1100 mm; depth: 1300 mm Heater, full cabin,

Condition: reconditioned (used), Year of construction: 2005, operating hours: 15,604 h, functionality: fully functional, pressing force: 50 t, filling opening width: 1,050 mm, filling opening length: 1,250 mm, bale length: 1,200 mm, bale width: 1,100 mm, bale height: 700 mm, bale weight: 500 kg, total width: 1,700 mm, total height: 2,400 mm, total length: 7,800 mm, input voltage: 400 V, input current: 64 A, overall weight: 12,500 kg, transport height: 2,400 mm, power: 30 kW (40.79 HP), year of last overhaul: 2024, volume flow: 160 m³/h, transport width: 1,700 mm, transport length: 7,800 mm, tank capacity: 600 l, Hello, We are offering you a used baler from the manufacturer Presto GmbH & Co. KG, type HPK 50 B, subject to change. The following technical data was taken from the manufacturer's operating instructions and brochures, for which we cannot guarantee their accuracy or completeness. Manufacturer Presto GmbH & Co. KG Type HPK 50 B Year of manufacture 2005 Pressing force of main press 50 t Drive power 30 kW Total connected load 31.5 kW Rated current 64 A Throughput under operating conditions with a bulk weight of 60 kg/cbm approx. 6.7 t/hour Machine weight of press 12.5 t Note: The machine is currently in our workshop for overhaul and is expected to be tested and ready for sale in February. The machine documentation is available in German. A viewing of the press is possible by appointment in our workshop. We would be pleased if this machine is of interest to you. Itsdouan Hzjpfx Ag Usb Your service team Mertens & Frowein GmbH

Condition: new, functionality: fully functional, Year of construction: 2025, container length: 18 ft, color: grey, overall weight: 15,000 kg, maximum load weight: 13,180 kg, empty load weight: 1,820 kg, loading space volume: 9.5 m³, loading space width: 2,300 mm, loading space length: 5,500 mm, loading space height: 750 mm, Price on request. The price is ex stock 33106 Paderborn! Bulk discounts available when purchasing multiple containers. Leasing/hire purchase possible. 4 units immediately available from stock, RAL 7043 2 units immediately available from stock, RAL 6002 Other versions and sizes available ex stock Paderborn. You are welcome to view our current stock on our website. Ijdpfjw D Dvdjx Ag Ustb Technical description: • Internal dimensions: 5500 x 2300 x 750 mm i.L. • Usable volume: 9.5 cbm • Unladen weight: 1820 kg • Floor: 5 mm S235 • Side walls: 3 mm S235 • Front wall with sloped extension • All sheets and profiles fully welded • Double-leaf door with safety lock • Container inspected and certified according to DGUV Rule 114-010 • Floor-to-side wall connection: 90° • Hook diameter: 50 mm, S355 • Hook height: 1570 mm • Top frame: round tube Ø89×6.3 mm • Net hooks • All moving parts are greaseable • Steel rollers 159×6.3, length 300 mm • Interior and exterior zinc phosphate primer, exterior finished with synthetic resin paint (80-100 μ) • Permissible gross weight: 15,000 kg Subject to prior sale and errors excepted. Photos for reference only! If you have further questions, please send us a message or call us.

Condition: excellent (used), axle configuration: 3 axles, first registration: 12/2004, total length: 11,090 mm, total width: 2,550 mm, total height: 3,800 mm, suspension: air, tire size: 385/65 R22,5, Year of construction: 2004, Equipment: ABS, = Additional options and equipment = - Air suspension Itodpfsx Nbdpex Ag Usb = Remarks = TRANSPORT TO ANTWERP 590 EURO = Further information = Tyre size: 385/65 R22.5 Axle brand: BPW Suspension: Air suspension Unladen weight: 8,020 kg Payload: 29,980 kg Gross vehicle weight: 38,000 kg Number of compartments: 8 Technical condition: very good Visual condition: very good

Condition: new, Year of construction: 2025, operating hours: 8 h, Very robust machine with high pressing force - is also suitable for producing a salable briquette quality * depending on the material. The large press cylinder and the 80 mm briquette make this possible. Our best-selling briquetting press series + Tried and tested, simple technology, for extremely low susceptibility to errors + 25 years of experience, further development and know-how + Several thousand machines in use with satisfied customers + Top price-performance ratio Surcharge for cooling unit + € 4.995 net, (can also be retrofitted later) * cools the pressing tongs (important from 3.5 hours) and the hydraulic oil * Cooling device recommended for regular use of more than 3.5 hours at a time. Briquette diameter: 80 mm Front bush: 125 mm Briquette stroke max .: 100 mm Briquette lift opt ​​.: 80 mm Output (depending on material): up to 200 kg / h * Itedpfxexfwdo Ag Ueb * depending on the bulk weight * based on a bulk weight of 200 kg per cubic meter Motor power: 9.2 kW 400 volts / 50 Hz / 3 phases Length: 2095 mm Width: 1300 mm Height: 1700 mm Weight: 1250 kg Oil volume: 220 liters Silo diameter: 1200 mm Silo content: approx. 1 qbm Pump: 75 liters Hydraulic pre-compressor Cooling pressing tongs option: yes, with special accessory coolable pressing tongs Hydraulic oil cooling option: yes Cooling of the pressing tongs and the hydraulic oil with cooling device (special accessory) Level monitoring option: yes Strand briquette option; yes (depending on material) Option of enlarged filling slide: yes, with special accessory enlarged filling slide CE compliant . Requirements for the raw material: - The moisture content (atro) must be between a minimum of 6 and a maximum of 18% - Chip length maximum 20 mm - Installation temperature: temperature-controlled room at at least + 5 ° C - The loading must be free of metals and mineral impurities such as sand, stones, etc. This can result in damage to the pressing tools and / or increased wear

Condition: new, Year of construction: 2025, Good, used demonstration machine Availability upon request Very robust machine with high pressing force - also suitable for producing briquettes of saleable quality *depending on the material. The large pressing cylinder and the 70 mm briquette make this possible. Our best-selling briquetting press series + Proven, simple technology for extremely low susceptibility to errors Itjdpfed Nm Sijx Ag Ujb + 25 years of experience, continuous development, and know-how + Several thousand machines in use with satisfied customers + Top price-performance ratio Supplement for demonstration cooling unit + €4,980 net, (can also be retrofitted later) * Cools the pressing tongs (important for use after 4 hours) and the hydraulic oil * Cooling unit recommended for regular use of more than 4 hours at a time. Tariff number: 84793010, Briquette diameter: 70 mm, Front bushing: 125 mm, Max. briquette stroke: 100 mm, Optional briquette stroke: 80 mm, Capacity (depending on material): up to 150 kg/h* *depending on bulk density, *based on a bulk density of 200 kg per cubic meter. . Motor power: 9.2 kW, 400 volts / 50 Hz / 3-phase, Length: 2095 mm, Width: 1300 mm, * with large chamber 1600 mm Height: 1700 mm, Weight: 1250 kg, Oil capacity: 220 liters, Silo diameter: 1200 mm Silo capacity: approx. 1 cubic meter Pump: 75 liters Hydraulic pre-compressor Cooling option for pressing tongs: yes, with optional coolable pressing tongs Cooling option for hydraulic oil: yes Cooling of the pressing tongs and hydraulic oil with a cooling unit (optional accessory) Level monitoring option: yes Extruded briquette option; Yes (depending on material) Optional enlarged feed slide: Yes, with special accessory enlarged feed slide CE compliant Raw material requirements: - The moisture content (dry) must be between a minimum of 6% and a maximum of 18% - Maximum chip length: 20 mm - Installation temperature: Temperature-controlled room at a minimum of +5°C - The feed must be free of metals and mineral contaminants such as sand, stones, etc. This may result in damage to the press tools and/or increased wear.

Condition: new, Year of construction: 2025, operating hours: 9 h, Our best-selling briquetting press, the classic. + Tried and tested, simple technology for extremely low susceptibility to errors + 25 years of experience, further development and know-how + Several thousand machines in use with satisfied customers + Top price-performance ratio Options for an extra charge: * Surcharge for the level indicator that enables automatic operation + € 995 net * Surcharge for large pre-compression chamber + 980 € (recommended for light material like straw) Briquette diameter: 50 mm Front bush: 50 mm Briquette stroke max .: 40 mm Briquette lift opt ​​.: 40 mm Throughput (depending on material): 30-60 kg / h * * depending on the bulk weight * based on a bulk weight of 200 kg per cubic meter . Motor power: 5.5 kW 400 volts / 50 Hz / 3 phases Length: 1680 mm Width: 1100 mm Height: 1500 mm Weight: 680 kg Oil volume: 110 liters Itjdpfx Agjgl Nlmj Usb Silo diameter: 1000 mm Silo content: approx. 0.7 square meters Pump: 27 liters Hydraulic pre-compressor Option cooling pressing tongs: no Hydraulic oil cooling option: yes Level monitoring option: yes CE compliant . Requirements for the raw material: - The moisture content (atro) must be between a minimum of 6 and a maximum of 18% - Maximum chip length 15 mm - Installation temperature: temperature-controlled room at at least + 5 ° C - The customer must insure himself against loss of hydraulic oil - The loading must be free of metals and mineral impurities such as sand, stones, etc. This can result in damage to the pressing tools and / or increased wear

Condition: like new (used), Year of construction: 2012, functionality: fully functional, KHS CAN FILLING LINE FOR CSD AND BEER Technical Data Capacity: 25,000 bph (0.5L) Product: Carbonated soft drinks and beer Can Formats: 500ml 211/202 Lid Formats: 211/202 Packaging: Tray with shrink film Application: CSD and beer Condition: Good technical condition, dismantled Scope of Supply - Bulk can depalletizer | LINKER | DPG-500 | Year: 2012 - Can inspection system | TransTech | Hysek CanCheck | Year: 2012 - Can conveyors | LINKER / KHS | Conveyor RC | Year: 2012 - Can rinser | LINKER / KHS | Triplex Rinser TR | Year: 2012 - Flash pasteurizer | KHS | Innopro 140/14/85 | Year: 2012 - Can filler | KHS | Innofill Can DVD | Year: 2017 - Can seamer | Ferrum | F08 | Year: 2012 - Lid feeder | NSM | Lidserver A30 | Year: 2017 - Conveyor | KHS | Innoline BTR | Year: 2012 - Fill level inspection | KHS | Innocheck CUB | Year: 2012 - Can blowing unit | Europool | – - Tray packer | KHS Kisters | SP0502 | Year: 2012 - Pack conveyor | KHS | Innoline GTR | Year: 2012 Itedpfx Ajx U Snpog Ueb - Handle applicator | KHS | CSM 050-2 | Year: 2012 - Packing machine | KHS | Innopack 035 B2 + FS A-L | Year: 2012/2017 - Palletizer | KHS | Innopal PBL1N1 | Year: 2012 - Stretch wrapper | SIAT | MFP | Year: 2017 - Pallet conveyor | KHS | Innoline PTR This line is suitable for bottling carbonated soft drinks and beer in 500ml cans, with a maximum output of 25,000 cans per hour. It comes dismantled, in good technical condition, and ready for reinstallation.

Condition: new, axle configuration: 3 axles, loading space volume: 35 m³, total width: 2,550 mm, total height: 3,940 mm, Year of construction: 2026, Equipment: ABS, O.ME.P.S Silo Trailer ---- Type: CM 35 (Horizontal Silo) Axles and Suspension: Disc brakes 22.5" SAF axle assemblies, 3 x 9t with air suspension, axle spacing is 2 x 1310 mm, raising and lowering valve, loading pressure gauge on top of the tank, Wabco Smartboard, Wabco tire pressure monitoring system, 1st axle liftable without tractor equipment, 3rd axle liftable with Wabco Optiturn. Rims and Tires: 6 wheels with 385/65 R22.5 tires, manufacturer’s choice, on Alcoa Ultra One aluminum rims, size 11.75 x 22.5 ET 120. Brake System: EBS 4S/2M WABCO air brake system with RSS, according to standard 98/12/CE - ECE R13/09, brake wear indicator connected. Landing Gear: Mechanical landing legs with two speeds, 2 x 20t support load, with pivoting foot. Electrical System: All lights in LED version, 24 volt electrical installation consisting of: one 15-pin socket mounted in front of the kingpin on the chassis carrier, yellow side marker lights in prescribed quantity, rear position lights, front marker lights, rear license plate lights, lights according to standards 97/28/CE-2007/35/CE, 2 multi-chamber rear lights mounted at turntable height in aluminum brackets as per standards 97/28/CE-2007/35/CE, 2 rotating LED work lights mounted top left and right on the tank, yellow warning light at rear at hose pipe height, 2 x reversing lights in underrun protection, 2 x reversing lights at leg height (each separately switchable from the energy console). Tank Design: A horizontal tank made of aluminum alloy (AW5083 Peraluman 45 AlMg 4.5 Mn), single-chamber tank, with a capacity of 35,000 liters, tank warranty: 24 months from delivery, kingpin 2" according to standard 94/20/CE Ijdpex Nufyofx Ag Ujtb Operating Parameters: Pressure vessel as per the Pressure Equipment Directive PED 97/23/CE. Wall thickness approx. 5 mm, test pressure 3.0 Bar – operating pressure 2.0 Bar, operating temperature -40° to +80° Filling Options: 3 manholes DN 450 with swiveling and folding dome lids. Each dome lid is pressure-tight, secured with 4 wing nuts, support for dome lids on top for storage, rain channel closed at front – open at rear. Material Discharge: 2 product outlet cones with synthetic fabric inserts for fluidizing, individual discharge lines DN 100 made of steel and connected to the rear, 2 pinch valves DN 100 AKO in the lines, DN 100 ball valve with ring nozzle, remote control for the ball valve and Storz A coupling at the end of the discharge line. Air Piping: A 2.5" stainless-steel air manifold installed on the right-hand operation side. The air line is routed to the front up to the end of the silo with a check valve and DN 65 connection hose for compressor with Storz-B coupling. The air manifold is equipped with ball valves for top air, auxiliary air, and fluidization. Top air 2" rear right, PRESSURE LINE INLET REAR RIGHT, external air intake Storz C at the air line tube, pneumatic connection with blow-off gun and spiral hose on top of the walkway near the access ladder, 1 x vibrator on top of the tank, air line located centrally on the walkway for cleaning with gun, air line below in tool box for cleaning with gun. Ladder and Access: 1 aluminum ladder mounted at the rear left of the vehicle, 1 pneumatic aluminum safety scissor handrail with locking system acting on the brake, 1 aluminum...

Condition: new, loading space volume: 60 m³, total width: 2,550 mm, total height: 3,930 mm, Year of construction: 2026, Equipment: ABS, OMEPS Tipping Silo Semi-Trailer ---- Model: CR 60 Chassis: Two fully automatically welded I-section longitudinal beams with welded cross members, chassis width 1,400 mm, 2" kingpin, tipping cylinder: Hyva Axles and suspension: 22.5" disc brake SAF axle units, 3 x 9 t with air suspension, axle spacing 2 x 1,310 mm, raise/lower valve, loading manometer mounted on top of the tank, Wabco Smartboard, Wabco TPMS tire pressure monitoring, first axle liftable (not equipped for tractor unit), third axle liftable with Wabco Optiturn Wheels and tires: 6 wheels with tires size 385/65 R22.5, as per manufacturer’s specification on Alcoa Dura Bright aluminum rims 11.75x22.5 ET 120 Braking system: EBS 4S/2M WABCO compressed air braking system with RSS, compliant with standard 98/12/CE - ECE R13/09, brake wear indicator connected Landing gear: Mechanical landing legs with two speeds, 2 x 20 t static load with swivel foot, rear support with crank stands Electrical system: All lights in LED version, 24 Volt electrical system consisting of: one 15-pin socket mounted in front of the fifth wheel on the chassis carrier, amber side marker lamps as required, rear position lights, front marker lights, rear license plate lights, lamps according to standard 97/28/CE-2007/35/CE, 2 multi-chamber rear lamps fitted at swivel joint height in aluminum holders in accordance with standard 97/28/CE-2007/35/CE, 1 LED work lamp on the tank, yellow warning beacon at rear at hose tube height, 2x reverse lamps in underrun protection, 2x reverse lamps at the level of the support legs (each switchable at the power console) Tank design: A horizontal tank made from aluminum alloy (AW5083 Peraluman 45 AlMg 4.5 Mn). One-compartment tank, 60,000 liters capacity. Tank warranty: 24 months from delivery. Operating parameters: Pressure vessel according to the Pressure Equipment Directive PED 97/23/CE. Wall thickness approx. 5 mm, test pressure 3.0 bar, operating pressure 2.0 bar, operating temperature -40° to +80° C. Filling options: 5 manholes DN 450 with hinged and folding dome covers. Each dome cover is pressure-tight sealed with 4 wing nuts, rubber support for dome cover on top for storage, rain gutter closed at the front and open at the rear Material discharge: 1 material outlet cone DN 800 made of INOX, foldable with INOX disc for aeration, material outlet cone swivels laterally, DN 150 shut-off valve with white gasket, connection: STORZ-A Itjdpfjx Nugdox Ag Uob Air piping: A 2.5" stainless steel air manifold line mounted on the operating side RIGHT, a 4" stainless steel air distribution tube is mounted at the rear of the tank, air valves (butterfly valves) in stainless steel, top air hose and air connection hoses are 2" STORZ couplings, micron filter, vacuum valve on top of the tank, 1x vibrator 1 m in front of the swivel bearing Ladder and walkway: 1 aluminum ladder mounted at the rear left of the vehicle, 1 aluminum safety railing can be erected from below using a separate fold-up ladder piece and a parking brake when opened, 1 aluminum safety grating runs along the top left side of the tank, anti-slip coating on the tank Discharge hose storage: 4 hose tube containers 5 m long DN 200 made of aluminum with 4 hoses DN 100 and STORZ couplings, hose container with compressor hose D.76 Accessories: The side underrun protection is made of anodized aluminum...

Condition: new, axle configuration: 3 axles, loading space volume: 35 m³, total width: 2,550 mm, total height: 3,940 mm, Year of construction: 2026, Equipment: ABS, O.ME.P.S Silo Trailer----Type: CM 35 Axles and Suspension: Disc brakes 22.5" SAF axle assemblies (3 x 9 t) with air suspension, axle spacing 2 x 1310 mm, lift and lower valve, loading pressure gauge on top of the tank, Wabco Smartboard, Wabco tire pressure monitoring system, 1st axle liftable without tractor unit equipment, 3rd axle liftable with Wabco Optiturn. Wheels and Tires: 6 wheels with 385/65 R22.5 tires, manufacturer’s choice on Alcoa Ultra One aluminum rims size 11.75 x 22.5 ET 120. Brake System: EBS 4S/2M WABCO pneumatic brake system with RSS, compliant with standard 98/12/CE - ECE R13/09. Brake wear indicator connected. Landing Legs: Mechanical landing legs with two speeds, 2 x 20 t static load with swiveling foot. Electrical System: All lights LED version, 24-volt electrical installation consisting of: one 15-pin socket mounted in front of the fifth wheel plate on the chassis beam, yellow side marker lamps as required, rear position lamps, front outline markers, rear license plate lights, lights compliant with standard 97/28/CE-2007/35/CE, 2 multi-chamber rear lamps mounted at the pivot height in aluminum brackets per 97/28/CE-2007/35/CE, 2 rotatable LED work lights on top left and right of the tank, yellow warning beacon at the rear at hose pipe height, 2x reversing lights on the underrun protection, 2x reversing lights at the leg height (each switchable on the power console) Tank Design: Horizontal tank made of aluminum alloy (AW5083 Peraluman 45 AlMg 4.5 Mn). Single-compartment tank, 35,000 L capacity. Tank warranty: 24 months from delivery. 2" kingpin as per standard 94/20/CE Operating Parameters: Pressure vessel in accordance with the Pressure Equipment Directive PED 97/23/CE. Wall thickness approx. 5 mm, test overpressure 3.0 bar, operating overpressure 2.0 bar, operating temperature -40°C to +80°C. Isdpfjx Nuf Hex Ag Ustb Filling options: 3 manholes DN 450 with swivel and foldable manhole covers. Covers close pressure-tight with 4 wing nuts each, support on top for cover storage, rain rail closed at the front, open at the rear. Material Discharge: 2 discharge cones with synthetic fabric agitator inserts, individual discharge lines DN 100 made of steel combined at the rear, 2 pinch valves DN 100 AKO in the lines, DN 100 shut-off ball valve with ring nozzle, remote control for shut-off ball valve and Storz A coupling at the end of the discharge line. Air Piping: 2.5” stainless steel air manifold mounted on the right-hand operator side, air line routed to the front, up to the end of the silo with check valve and DN 65 connection hose for compressor with Storz-B coupling. The air manifold has ball valves for upper air, additional air, and agitation air. Upper air 2” rear right, PRESSURE INLET REAR RIGHT, external air connection Storz C on the air line rear RIGHT, pneumatic connection with blow-off gun and spiral hose on the catwalk near the access ladder, 1 vibrator top of the tank, air line center-top on the catwalk for cleaning with air gun, air line bottom in storage box for cleaning with air gun. Ladders and Access: 1 aluminum ladder mounted rear left of the vehicle, 1 pneumatic aluminum safety scissor railing with locking system acting on the brake, 1 aluminum safety walkway

Condition: new, loading space volume: 60 m³, total width: 2,550 mm, total height: 3,930 mm, Year of construction: 2026, Equipment: ABS, OMEPS Tipping Silo Semi-Trailer----Type: CR 60 Chassis: Two fully automatically welded I-beam longitudinal members with welded cross members, chassis width 1,400 mm, 2" kingpin, tipping cylinder: Hyva Axles and Suspension: Disc brakes 22.5" SAF axle assemblies, 3 x 9 t with air suspension. Axle spacing is 2 x 1,310 mm. Raise/lower control valve, loading pressure gauge mounted on top of the tank, Wabco Smartboard, Wabco TPMS tire pressure monitoring, 1st axle liftable without tractor equipment, 3rd axle liftable with Wabco Optiturn Wheels and Tires: 6 wheels with 385/65 R22.5 tires, manufacturer’s choice of Alcoa Dura-Bright aluminium rims in 11.75 x 22.5 ET 120 Brake System: EBS 4S/2M WABCO pneumatic brake system with RSS, in compliance with Standard 98/12/CE - ECE R13/09, brake wear indicator connected Landing Gear: Mechanical landing legs with two speeds, 2 x 20 t support capacity with swiveling foot, rear crank landing gear Iedpfx Aex Nuf Tjg Uetb Electrical System: All lights in LED version, 24-volt electrical installation consisting of: one 15-pin socket mounted in front of the fifth wheel on the chassis rail, yellow side marker lights in the required number, rear position lights, front clearance lights, rear license plate lights, lights according to Standard 97/28/CE-2007/35/CE, two multifunction rear lights mounted on aluminium brackets at the level of the pivot bearing as per Standard 97/28/CE-2007/35/CE, one LED work light on the tank, yellow warning beacon at rear mounted at hose pipe height, 2x reversing lights in the underrun protection, 2x reversing lights at support height (each individually switchable from the power console) Tank Construction: Horizontal tank made of aluminium alloy (AW5083 Peraluman 45 AlMg 4.5 Mn). Single-chamber tank with a 60,000-litre capacity. Tank warranty: 24 months from delivery Operating Parameters: Pressure vessel in accordance with Pressure Equipment Directive PED 97/23/CE. Wall thickness approx. 5 mm, test pressure 3.0 bar – operating pressure 2.0 bar, operating temperature -40° to +80°C Filling Options: 5 manholes DN 450 with swing and folding dome covers. Dome covers tightly sealed with 4 wing nuts each, rubber support for dome covers on top for stowage, rain gutter closed at front – open at rear Material Discharge: 1 discharge cone DN 800 in stainless steel (INOX), folding with INOX disc for loosening, discharge cone laterally swivelling, shut-off valve DN 150 with white seal, connection: STORZ-A Air Piping: 2.5" stainless steel air manifold mounted on the right operating side, one 4" stainless steel air distribution pipe mounted at the rear of the tank, air valves (shut-off valves) in INOX, top air hose and air connection hoses with 2" STORZ couplings, micron filter, vacuum valve on top of tank, 1x vibrator 1 m before the pivot bearing Access Ladder and Walkway: 1 aluminium ladder mounted rear left on the vehicle, 1 aluminium safety scissor handrail deployable from below with separate folding ladder section and parking brake when open, 1 aluminium safety catwalk runs along the top left of the tank, anti-slip coating on the tank Hose Storage: 4 hose tube containers, 5 m long, DN 200 made of aluminium with 4 DN 100 hoses and STORZ couplings, hose tube with compressor hose D.76 Accessories: Side-mounted ...

Condition: new, total width: 2,550 mm, total height: 3,960 mm, Year of construction: 2026, Equipment: ABS, O.ME.P.S Tipping Silo Semi-Trailer – Type: CR 47 Chassis: Two fully automatically welded I-section longitudinal beams with welded cross members, chassis width 1,400 mm, 2" king pin, tipping cylinder: Hyva Axles and Suspension: Disc brakes 22.5" SAF axle units, 3x 9t with air suspension, axle spacing is 2 x 1310 mm, raise/lower valve, loading pressure gauge mounted on top of the tank, Wabco Smartboard, Wabco TPMS tire pressure monitoring, 1st axle liftable without tractor unit equipment, 3rd axle liftable with Wabco Optiturn Rims and Tyres: 6 wheels fitted with 385/65 R22.5 tyres, as per manufacturer’s choice on Alcoa Dura Bright aluminium rims, 11.75x22.5 ET 120 Brake System: WABCO EBS 4S/2M compressed air brake system with RSS, according to standard 98/12/CE - ECE R13/09, brake pad wear indicator connected Landing Legs: Mechanical landing legs, two speeds, 2x 20t support load with swiveling foot, rear without support Electrical System: All lights in LED version, 24 volt electrical system consisting of: one 15-pin socket mounted in front of the fifth wheel on the chassis, yellow side marker lights in the required number, rear position lights, front outline marker lights, rear license plate lights, lighting in compliance with standard 97/28/CE-2007/35/CE, 2 multi-chamber lights mounted at pivot height on aluminum brackets in compliance with standard 97/28/CE-2007/35/CE, 1 LED work spotlight mounted on the tank, yellow warning beacon at the rear at hose tube height, 2x reversing lights on underrun protection, 2x reversing lights at the height of the supports (each switchable on the energy console) Tank Design: A horizontal tank made of aluminum alloy (AW5083 Peraluman 45 AlMg 4.5 Mn), single-chamber tank, with 47,000 liters capacity, tank warranty: 24 months from delivery, operating parameters: pressure vessel according to Pressure Equipment Directive PED 97/23/CE. Wall thickness approx. 5 mm, test pressure 3.0 bar, operating overpressure 2.0 bar, operating temperature -40° to +80° C Filling Options: 4 manholes DN 450 with swing and folding domed covers. The dome covers are closed pressure-tight with 4 wing nuts each, rubber supports for the domed covers at the top for storage, rain guard at the front closed - rear open Material Discharge: 1 discharge cone DN 800 made of stainless steel (INOX), foldable with INOX disc for loosening, discharge cone swivel-mounted laterally, shut-off valve DN 150 with white seal, connection: STORZ-A Air Piping: One 2.5" stainless steel air manifold pipe mounted on the right-hand control side, one 4" stainless steel air distribution pipe mounted at the rear of the tank, air valves (shut-off valves) in stainless steel, top air hose and air connection hoses with 2" STORZ couplings, micron filter, vacuum valve on top of the tank, 1x vibrator 1m in front of the pivot bearing Iedpex Nufmsfx Ag Ujtb Ladder and Access Walkway: 1 aluminum ladder mounted at the rear left of the vehicle, 1 aluminum safety folding guardrail deployable from below with a separate ladder part, equipped with parking brake when opened, 1 aluminum safety walkway running along the left on top of the tank, non-slip coating on the tank Discharge Hose Storage: 4 hose tube containers 5m in length, DN 200 made of aluminium with 4 hoses DN 100 and STORZ couplings, hose container with compressor hose D.76 Accessories: The side underrun protection...