Used Bulk for sale (727)

Condition: excellent (used), Year of construction: 2012, operating hours: 350 h, functionality: fully functional, machine/vehicle number: R-3176, overall weight: 5,500 kg, total width: 1,400 mm, total length: 7,000 mm, temperature: 200 °C, power: 6 kW (8.16 HP), type of input current: three-phase, input voltage: 400 V, input frequency: 50 Hz, Equipment: documentation/manual, For sale is a Binder DRYON DRVF 1400×7 fluidized bed/vibrating dryer for wood chips, compost, biomass, wood shavings, and comparable bulk materials. The system was used exclusively for testing purposes and has only approximately 300–400 operating hours. It is in good condition and fully functional. Key data: (The system has previously been used for steam drying with superheated steam at approximately 200 °C. Conversion to other drying media, such as air or flue gas, is possible in principle with appropriate modifications.) - Dryer width: approx. 1,400 mm - Overall length: approx. 7,000 mm - Input capacity: approx. 2,000 kg/h wet (designed for green waste) - Output capacity: approx. 1,200 kg/h dry (designed for green waste) - Water evaporation: approx. 667 kg/h (designed for green waste) - Output moisture content: ≤ 10% (designed for green waste) - Installed electrical power: approx. 6 kW - Weight: approx. 5,500 kg Gjdpfezg Dx Uex Ag Tjuh Upon request, additional components for a complete drying unit can be purchased. These include a filter system, a high-performance radial fan, and the associated drive motor. (see planning drawing) Filter system: NESTRO Lufttechnik GmbH, Type Jet 9525, year of manufacture 2013, factory number FA169096, filter area 282.6 m², max. compressed air 6.0 bar, category EK004182, weight approx. 8,000 kg. Fan / drive motor: High-performance radial fan Type HRV28-450 with drive motor VEM motors GmbH, Type IE2-W21R 315MX2, year of manufacture 02/2013, motor number 180022/0001 H, power 160 kW / 218 HP, voltage 400 V, current 274 A, speed 2,973 min⁻¹, frequency 50 Hz, protection class IP55, insulation class 155, weight approx. 955 kg.

Condition: excellent (used), functionality: fully functional, MESUTRONIC MN 5.0 CI 400/200 | Metal Detector / Metal Detection System with Conveyor Belt Manufacturer: MESUTRONIC Gerätebau GmbH Model / Type: MN 5.0 CI 400/200 Serial Number: 930217 - CI Power Supply: 100 - 240 V, 50/60 Hz Current Consumption: 50 - 300 mA Ingress Protection Rating: IP 66 (detection head) IP 65 (control panel) Belt Width: 350 mm Aperture Dimensions: 400 x 160 mm Guedpjzhgtwsfx Ag Toh Dimensions: 1650 x 840 x 1130 mm Conveyor Type: Plastic belt The professional Mesutronic MN 5.0 CI metal detector is a technologically advanced inspection device designed to meet the stringent safety standards of the food, processing, and baking industries. The detector's primary function is to precisely identify metallic contaminants (both ferrous and non-ferrous metals, as well as stainless steel) in products transported in bulk or in individual packaging. This effectively protects consumers and safeguards subsequent machines in the production line from costly breakdowns. The core of the device is a highly sensitive tunnel head connected to an intuitive digital control panel, the Mesutronic PK 01. The system features excellent product effect compensation (the influence of product moisture, salt, or temperature on the reading), which minimizes the risk of false alarms. The machine is ideal for meat processing plants, fish processing plants, slaughterhouses, delicatessen plants, and automated packaging lines, where maintaining continuous quality control is crucial. A stable conveyor belt with a width of 350 mm ensures smooth and uniform product feeding through the detection window with an aperture of 400 x 160 mm.

Condition: new, Year of construction: 2026, functionality: fully functional, New Cursal log splitting line for firewood – available IMMEDIATELY, instead of a 6-month lead time. Gsdpfx Agozm Twyj Tjuh A new TRV 1600L 700 ordered today directly from Cursal s.r.l. currently has a manufacturing lead time of 5 and a half to 6 months. This specific line, ordered in February 2026, is nearing completion and will be available immediately, ex-works from the Cursal factory in San Fior, Italy. Same price as a new order from the factory: €59,590, but without the 6-month wait. For a firewood producer, this means the line can be operational before the next winter season, rather than after. We ordered this line for our own production, but a change in our manufacturing process means it no longer fits our needs. It has never been delivered, installed, or operated outside the factory. * Full 12-month manufacturer's warranty from the date of delivery * CE certification * Collection directly ex-works in Italy, avoiding double transport * User manual and video tutorial included – over 90% of these machines are installed by the customers themselves * Optional installation by a Cursal technician available for approximately €2,250 ### Scope of supply Cursal order confirmation no. 2-01407/26 #### 1 × CURSAL TRV 1600L 700 Log splitting saw for bulk-loaded firewood of varying lengths * 15 HP blade motor with automatic braking and computer-controlled cutting * Adjustable cutting time from 0.6 to 2 seconds * Pneumatic blade movement * Piece length at entry: from 500 to 6,000 mm * Programmable cutting length: from 100 to 750 mm * Maximum cutting height at the blade center: 200 mm * Maximum width at the base: 520 mm * Feed speed up to 50 m/min * Variable speed motor * Pneumatic press with 6 independent toothed elements * Press stroke: 250 mm * 2 sawdust extraction ducts of Ø 100 to 140 mm * Complete side guards * Dimensions: 2,500 × 1,200 × 2,050 mm #### 1 × RAMM 4000 × 710 Motorized roller feed conveyor * 0.75 HP motor * Variable speed from 5 to 50 m/min * Galvanized rollers Ø 76 mm * Roller pitch: 125/250 mm * Capacity: 420 kg per roller * Lateral retaining barriers * Length: 4,000 mm #### 1 × HM 700-40-80 Widia® blade * Diameter: 700 mm * Bore: 40 mm * Number of teeth: Z 80/84 ### Power supply * Electrical power supply: 400 V three-phase / 50 Hz * Protection rating: IP54 * Compressed air: 7 bar Ideal machine for firewood producers, sawmills, and biomass plants. With the winter demand approaching, this is the only opportunity to have a new, operational Cursal line available this season. Location: ex-works Cursal, San Fior (TV), Italy. Delivery can be arranged.

Year of construction: 2026, condition: new, functionality: fully functional, For sale: Skip container, 5.5 - 12 m³, crane container, waterproof, concrete container Product description: For sale is a skip container, 5.5 - 12 m³, crane container, waterproof, concrete container, manufactured according to DIN 30720-1, ideal for the transport and storage of waste, bulk materials, or industrial materials. The container is robust, safe, and ready for immediate use. Technical data: Standard: Technical description 30720-1 Crane container • Bottom: 6 mm S 355 • Sides: 4 mm S 355, 6 x 200 mm S355 • All sheets and profiles are welded • Corner reinforcements • Double-sided 3-point tilting bearing (bolt Ø45) x 2 • Stacking bar: 5 mm • Safety bar • Crane hooks x 4 • Frame edges: UNP 120/100 x 50 x 6 mm • Information and warning stickers, white and red • The entire basic range of RAL colors is available • Inside and outside: zinc phosphate primer, outside coated with synthetic resin paint (80-100 μ) • Technical description 30720 -1, waterproof • Bottom: 6 mm S 355 • Sides: 4 mm S 355 • All sheets and profiles are welded • Corner reinforcements • Double-sided 3-point tilting bearing (bolt Ø45) x 2 • Stacking bar: 100 x 50 x 6 mm • Safety bar Gusdszmqnvjpfx Ag Toh • Frame edges: U 100 x 50 x 4 mm • Information and warning stickers, white and red • The entire basic range of RAL colors is available • Inside and outside: zinc phosphate primer, outside coated with synthetic resin paint (80-100 μ) • Technical description • Bottom: 8 mm S 355 • Sides: 6 mm S 355 • All sheets and profiles are welded • Corner reinforcements • Double-sided 3-point tilting bearing (bolt Ø45) x 2 • Stacking bar: 100 x 100 x 10 mm • Frame edges: UNP 140/120 • Information and warning stickers, white and red • The entire basic range of RAL colors is available • Inside and outside: zinc phosphate primer, outside coated with synthetic resin paint (80-100 μ) Certificate: CE Warranty: 2 years Advantages: Robust construction for heavy materials Easy handling thanks to flap and stable hinges Stackable and transportable with tilting truck systems Weather-resistant thanks to corrosion-resistant coating

Year of construction: 2026, condition: new, functionality: fully functional, For sale: skip with steel lid, 3000 x 2000 x 1250 mm Gjdjzq E R Tepfx Ag Tsuh Product description: For sale is a skip with a steel lid, 3000 x 2000 x 1250 mm, ideal for the transport and storage of waste, bulk materials, or industrial materials. The container is robust, safe, and ready for immediate use. Technical specifications: - Base: 3 mm - Sides: 3 mm - Steel lid: 2 mm - Frame, C-profile: 80 x 50 x 4 - Fasteners for transport, made of 6 mm sheet metal - Drain valve in the base of the container - Transport with a forklift is possible along and across the container - Transport with a crane is possible - Warning stickers: white and red - The entire range of RAL colors is available - Interior and exterior: zinc phosphate primer, exterior painted with synthetic resin paint (80-100 μ) Certificate: CE Warranty: 2 years Advantages: - Robust construction for heavy materials - Easy handling thanks to sturdy hinges - Stackable - Weather-resistant due to corrosion-resistant coating

Condition: good (used), Approx. 105 Euro mesh boxes, – used -: Only bulk purchase: Price per unit ex location: €69 (net)! Manufacturer: unknown Type: unknown Year of manufacture: unknown Gedpfx Aew Hqauog Tsuh Dimensions, approx.: L: 1m, H: 0.65m, W: 0.80m Dead weight: approx. 43.5kg Condition: good Available: immediately Location: 67346 Speyer

Condition: refurbished (used), Bezner screening machine | roller screen type TWD reconditioned | refurbished with new bearings (roller bearings), new ball plates and reconditioned screen box Make: Bezner Type: TWD Screening capacity: up to approx. 60 - 80 srm/h (for wood chips and sawdust) Screen area: 6.0 m² per screen mesh size Screen decks: 2 pieces Fractions: 3 Mesh size of the screen: - 1st screen deck: punched perforated plate screen, D = 45 mm or as agreed Gsdsw Spntspfx Ag Teuh - 2nd screen deck: punched perforated plate screen, D = 10 mm or as agreed Drive power: 5.5 kW, 3 x 400 V, 50 Hz Height of screen box: 820 mm L x W x H: 4,000 x 2,200 x 1,550 mm Machine weight: approx. 5,500 kg Machine color: RAL 6011 Reseda green Screen inserts freely selectable Design of outlets according to customer requirements Suitable for screening the following bulk materials, among others: - Wood chips - Sawdust and sawdust - biomass - wood pellets - charcoal - Waste wood - bark Wood chip screen | Vibrating screen | Flat screen | Oscillating screen | Oscillation screen | Wood chip screener | Screening machine for wood chips

Condition: excellent (used), Year of construction: 2009, load capacity: 180 kg, arm reach: 2,550 mm, controller manufacturer: ABB, controller model: IRC5, The IRB 6640 serie is ABB Robotics latest generation of high payload, high performance industrial robots. Based on the famous IRB 6600 series, with the flexible bending backwards concept, the very high wrist torque, the service friendly modular built up and the availability, significant for ABB’s robots, the IRB 6640 robot family goes even further. With focus on high production capacity, compact design and low weight, simple service and low maintenance cost. The IRB 6640 is ideal for process applications, regardless of industry. Typical areas are for example Spot Welding, Material Handling and Machine Tending. Specifications Payload: 130 kg Arm Reach: 2550 mm Model Type: IRB6640 Controller: IRC5 Model Year: 2009 Condition: Used Included: Manipulator + IRC5 Control Cabin + All Wire Sets + Teachpendant Godpfxew Namuo Ag Teuh We have a dedicated team handling these robots. If you share details about your project, we can recommend the most suitable robot for your needs and provide support throughout your project. We have big range of robots in stock, and if you are considering bulk purchases, we would be happy to offer a discount. The same model is available from the same or different production years, and bulk purchases can benefit from special pricing. As PLC Merkezi EOOD, we have more than 300 robots in our inventory and deal with the brands of KUKA, ABB, FANUC and Motoman.

Year of construction: 2025, condition: new, functionality: fully functional, the Seamark XC1000 X-Ray Component Counter: Smarter, Faster, and Fully Automated At Active-PCB Solutions, we know that accuracy, efficiency, and seamless integration are not optional, they’re an essential part of our manufacturing process. That’s why we’re excited to introduce our new Seamark XC1000 X-Ray Component Counter which has just been installed on our shop floor by Advanced Manufacturing Solutions Ltd. The next-generation offline X-ray component counting system is designed to redefine how we manage and verify our SMD component inventory. You can find out more about this new technology and how we intend to put it to full use below! Introducing the Seamark XC1000 X-Ray Component Counter Precision Counting Powered by AI Leveraging an advanced AI algorithm, this intelligent Seamark XC1000 X-Ray Component Counter system provides 99.99% counting accuracy for all SMD components sized 01005 and above, meaning we can say goodbye to manual errors and time-consuming reel unpacking. The XC1000 counts 1 to 4 reels simultaneously with no unspooling, no guesswork, and no downtime. Ergonomic Design Meets Automation The XC1000 features an ergonomically designed workstation where the operator can sit comfortably and monitor the easy-to-read counter screen. With an automated stage movement system and anti-pinch safety design, reel handling is simple, safe, and efficient. The unit is compact and mobile, thanks to built-in wheels for easy relocation. Smart Labeling and Real-Time Integration Mislabeling and manual input errors are inevitable and costly. However, with its error-proof labeling function, the XC1000 automatically detects and recognises each reel, instantly printing the correct label via a TSC industrial printer. This intelligent workflow is further enhanced by seamless real-time integration with MES, ERP, and WMS systems, enabling live data exchange and automatic result uploads. Built for the Modern SMT World The XC1000 is built to handle the full range of reel sizes (7”–15”), heights (5–80mm), and component types, including moisture-proof bag packaging, bulk materials, and JEDEC trays. Its amorphous silicon flat panel detector delivers sharp, high-resolution images with a 430mm × 430mm field of view, supported by four optional cameras for automatic barcode reading. Industry-Leading Database & Cloud Intelligence What sets the Seamark XC1000 X-Ray Component Counter apart is its dynamic, global X-ray component database, which includes: 15,000+ material profiles 60 million+ testing images 700,000+ core reference images Weekly updates with 160,000 new images Over 8.6 million classification training images This continually evolving database ensures compatibility with 99.2% of global components. Updates are cloud-synced monthly, keeping the whole system current and reliable. Key Technical Specs at a Glance Input Power: 220V, 10A, 50–60Hz Control System: Windows 10 64-bit Godpfx Agsyzpkze Tsuh X-Ray Source: Sealed microfocus (30–80KV, up to 1000 μA) Detector: 3072×3072 matrix, 139μm resolution Max Output Power: 56W Counting Speed: Fully automated, operator training not required.

Condition: new, loading space volume: 60 m³, total width: 2,550 mm, total height: 3,930 mm, Year of construction: 2026, Equipment: ABS, OMEPS Tipping Silo Semi-Trailer ---- Model: CR 60 Chassis: Two fully automatically welded I-section longitudinal beams with welded cross members, chassis width 1,400 mm, 2" kingpin, tipping cylinder: Hyva Axles and suspension: 22.5" disc brake SAF axle units, 3 x 9 t with air suspension, axle spacing 2 x 1,310 mm, raise/lower valve, loading manometer mounted on top of the tank, Wabco Smartboard, Wabco TPMS tire pressure monitoring, first axle liftable (not equipped for tractor unit), third axle liftable with Wabco Optiturn Wheels and tires: 6 wheels with tires size 385/65 R22.5, as per manufacturer’s specification on Alcoa Dura Bright aluminum rims 11.75x22.5 ET 120 Gujdpfx Aoy Ii Dzsg Teh Braking system: EBS 4S/2M WABCO compressed air braking system with RSS, compliant with standard 98/12/CE - ECE R13/09, brake wear indicator connected Landing gear: Mechanical landing legs with two speeds, 2 x 20 t static load with swivel foot, rear support with crank stands Electrical system: All lights in LED version, 24 Volt electrical system consisting of: one 15-pin socket mounted in front of the fifth wheel on the chassis carrier, amber side marker lamps as required, rear position lights, front marker lights, rear license plate lights, lamps according to standard 97/28/CE-2007/35/CE, 2 multi-chamber rear lamps fitted at swivel joint height in aluminum holders in accordance with standard 97/28/CE-2007/35/CE, 1 LED work lamp on the tank, yellow warning beacon at rear at hose tube height, 2x reverse lamps in underrun protection, 2x reverse lamps at the level of the support legs (each switchable at the power console) Tank design: A horizontal tank made from aluminum alloy (AW5083 Peraluman 45 AlMg 4.5 Mn). One-compartment tank, 60,000 liters capacity. Tank warranty: 24 months from delivery. Operating parameters: Pressure vessel according to the Pressure Equipment Directive PED 97/23/CE. Wall thickness approx. 5 mm, test pressure 3.0 bar, operating pressure 2.0 bar, operating temperature -40° to +80° C. Filling options: 5 manholes DN 450 with hinged and folding dome covers. Each dome cover is pressure-tight sealed with 4 wing nuts, rubber support for dome cover on top for storage, rain gutter closed at the front and open at the rear Material discharge: 1 material outlet cone DN 800 made of INOX, foldable with INOX disc for aeration, material outlet cone swivels laterally, DN 150 shut-off valve with white gasket, connection: STORZ-A Air piping: A 2.5" stainless steel air manifold line mounted on the operating side RIGHT, a 4" stainless steel air distribution tube is mounted at the rear of the tank, air valves (butterfly valves) in stainless steel, top air hose and air connection hoses are 2" STORZ couplings, micron filter, vacuum valve on top of the tank, 1x vibrator 1 m in front of the swivel bearing Ladder and walkway: 1 aluminum ladder mounted at the rear left of the vehicle, 1 aluminum safety railing can be erected from below using a separate fold-up ladder piece and a parking brake when opened, 1 aluminum safety grating runs along the top left side of the tank, anti-slip coating on the tank Discharge hose storage: 4 hose tube containers 5 m long DN 200 made of aluminum with 4 hoses DN 100 and STORZ couplings, hose container with compressor hose D.76 Accessories: The side underrun protection is made of anodized aluminum...

Condition: new, Year of construction: 2026, functionality: fully functional, warranty duration: 12 months, type of input current: three-phase, total width: 1,600 mm, total length: 1,300 mm, total height: 1,600 mm, overall weight: 530 kg, power of the servo motor: 1,000 W, hopper volume: 150 l, input voltage: 400 V, BIG-BAG UNLOADING SYSTEM Dedicated for clean unloading of big-bags and dosing into production line. Suitable for chemicals, ingredients and other bulk and/or dusty materials. Used when it is necessary to meet high hygiene requirements when working with incompatible or allergenic raw materials or components. - Made of stainless steel AISI304 (framing) and AISI316 (parts in contact with product), CE and FDA certified - Maximum big bag load 1500kg - Preinstalled connection for dust extraction - Discharging station on weighs, the real time monitoring and control of weight unloaded - Full process and data control via Touch screen HMI - Bag agitation - Lower hopper vibration - Product collection hopper with level sensor - Slowing down and stopping the unloading process at any time - Clamping the sleeve of an incompletely unloaded bag for tying - Easy access for disassembly, cleaning and disinfection - Integrated safety circuit Gjdpfsy I U S Dsx Ag Teuh Can be equipped with a lower mechanical shutter or with an easily removable screw conveyor

Year of construction: 1997, condition: excellent (used), functionality: fully functional, FOR SALE: 4 FOUR STAINLESS STEEL SILOS (INOX 304) – 500 m³ EACH Available for sale are 4 stainless steel silos, each with a capacity of 500 m³, constructed from INOX 304, suitable for storage and handling of dry bulk materials. Previous Use: The silos were used for loading dry materials into bulk tanker trucks (silo trucks). Technical Specifications: Capacity: 500 m³ (each) Total Height (including cone): 22.6 m (22,600 mm) Diameter: 5.7 m (5,700 mm) Material: Stainless Steel INOX 304 Silo Supports / Bases: Each silo is supported by 4 base structures Weight per base: approx. 60 tons Total base weight per silo: approx. 240 tons Base dimensions: Length 5,700 mm × Width 5,700 mm × Height 9,700 mm Location: Located in the Industrial Area of Volos, Greece Dismantling & Transport: Available upon agreement: Dismantling Transport to Port of Volos Loading for export Quantity: 4 units Price per unit: €200.000 Total price: €800.000 Condition: Available / For Sale Gsdpfx Agey I Dk Aj Tjuh For further information or commercial inquiries, please contact us.

Condition: new, Galen electrohydraulic undercrane polyp grabs are designed for efficient handling of scrap metal, industrial waste, bulk materials and recycling loads. With their built-in hydraulic system, they can operate directly under overhead cranes without requiring an external hydraulic power source. Strong body structure, powerful gripping performance and reliable operation make them ideal for scrap yards, steel plants, recycling facilities and industrial material handling applications. Gsdpfjy Rfr Tsx Ag Teuh For detailed information please contact us

Condition: new, Year of construction: 2025, IBS belt conveyors are designed for efficient, reliable, and continuous transport of concrete, stone, gravel, and other bulk materials in demanding working conditions. Thanks to their robust construction, high-quality components, and modular design, the conveyors provide a long service life, easy maintenance, and a high level of operational flexibility. The structure is made of high-quality steel, while all parts are powder-coated, ensuring high resistance to corrosion and weather conditions. Conveyors are produced in standard lengths of 5 m, 8 m, and 11 m. The standard belt width is 800 mm, while other widths and lengths are available upon special customer request. Gusdpfxozcwvms Ag Teh The belt speed can be fixed or optionally adjustable through a speed control system. Additionally, the conveyors can be equipped with a water supply pipeline, allowing water to be added directly at the conveyor discharge point, which is especially useful when working with concrete. The conveyor is available in three versions: Fixed Height and Angle Conveyor – a basic model designed for long-term operation at one location. The construction allows additional equipment to be added later, enabling conversion into one of the mobile or adjustable versions. Adjustable Height and Angle Conveyor – a fully mobile solution that allows quick and easy adjustment of conveyor height and angle. The modular base enables easy movement without the need for ground fixing. Automatic Rotation Conveyor – a model equipped with an automatic rotation system that allows quick repositioning of the material outlet without interrupting the production process. Ideal for dynamic construction sites and flexible operation.

Year of construction: 2026, condition: new, functionality: fully functional, The drum-type belt blast machine is specially designed for cleaning and derusting bulk materials. It operates reliably and is easy to use. Thanks to its robust construction and high-performance turbine, the system is ideal for daily use in production environments. Technical specifications: Capacity: 180 liters Turbine: 1 pc. Turbine 3.6.10 Guedpeyxpvlofx Ag Teh Turbine power: 11.0 kW Turbine control: frequency controlled Workpiece data: - Max. space diagonal: 270 mm - Max. workpiece weight: 25 kg Belt: perforation Ø 8 mm Abrasive: - Suitable for round abrasive media - Automatic refill silo: 100 liters - Integrated abrasive flow regulation Extraction & noise: - Sound pressure level without sound insulation ≤ 85 dB(A) - Filter unit can be positioned left or right Year of manufacture: approx. week 31/2026 Features: - Wear-resistant manganese lining in direct and indirect blasting zones - Turbine housing lined with tool steel - Turbine blades made of high-strength tool steel - Turbine feed channel also made of tool steel - Abrasive collection chute beneath the machine for optimized media return Options: - Customized paint finish - Flexible filter positioning (left/right) - Loading solutions available upon request

Condition: excellent (used), Year of construction: 2003, AZO Single Big-Bag Unloading System – Complete with Screening and Dust Extraction System --> vacuum conveying. Godpszb I H Tofx Ag Tsuh - Year of manufacture: 2003 - Dimensions L x W x H: 1600 (+1400 mast) x 1600 x 5000 - Material: Stainless steel - Double vibration motors - Condition: Excellent! - Including hoisting motor. For sale: a robust and complete AZO single big-bag unloading system, suitable for the low-dust and efficient processing of powders, granules, and other bulk goods. This system is equipped with a heavy-duty crossbeam with a lifting capacity of 2,000 kg, allowing larger big bags to be handled easily. The included lifting beam with electric hoisting motor and remote control has a capacity of 1,250 kg, which ensures safe and user-friendly lifting and positioning of the big bags. For optimal product quality, the system is equipped with a vibrating screen installation, supplied with two different screen decks, making the system flexible for various products and applications. The installation has 2 vibration motors, one on the big bag saddle and one in the vibrating screen itself for optimal vibration. Behind the screen is a dust extraction system with a dust filter, which effectively limits dust formation during unloading and maintains a clean working environment.

Condition: new, functionality: fully functional, empty load weight: 6,495 kg, overall weight: 39,000 kg, axle configuration: 3 axles, permissible axle load (axle 1): 9,000 kg, permissible axle load (axle 2): 9,000 kg, permissible axle load (axle 3): 9,000 kg, loading space volume: 60 m³, total length: 13,060 mm, total width: 2,530 mm, suspension: air, tire size: 385/65, tire condition: 100 %, ground clearance: 4,000 mm, Year of construction: 2026, NEW – AVAILABLE FOR IMMEDIATE DELIVERY Kassbohrer Silo 60 m³ – SSK 60 Silo for the transport of FLOUR, GRAINS, SUGAR, RICE, CEREALS, and PLASTICS Volume: 60 m³ Length: 13,060 mm Unladen weight: 6,495 kg BPW axles, 1st axle liftable 5 manway access points Godpfx Aezcaaueg Touh Storz end coupling Aluminum rims Pneumatic railing lifting system Electropolished discharge cone

Condition: used, empty load weight: 4,720 kg, overall weight: 38,000 kg, axle configuration: 3 axles, first registration: 06/2024, suspension: air, tire size: 385/65 R22.5, Equipment: ABS, O.M.E.P.S silo semi-trailer suction-pressure | SAF axles | Alloy wheels | Gross weight: 38,000 kg | Tyres: 385/65 R22.5 | Volume: 35,000 l | 3 compartments | Suction/pressure (reinforced version) | Lift axle | Pneumatic handrail | Errors, input mistakes, and prior sale reserved. Gujdpey R U Evsfx Ag Teh

Condition: excellent (used), functionality: fully functional, Year of construction: 1992, operating hours: 1,322 h, CLARK TM 15 N | Electric front forklift, 3-wheel forklift with a KAUP positioning system/rotator Manufacturer: CLARK Model/Type: TM 15 N Serial number: TM145 5970 GEF 7000 Year of manufacture: 1992 Power source: 48 V battery Forklift weight without battery: 2160 kg Battery weight: min. 710 kg / max. 760 kg Rated load capacity: 1500 kg at a center of gravity of 500 mm Maximum lifting height: 3070 mm Operating hours: 1322 engine hours Hydraulic fork positioner / rotating clamp Brand: KAUP Type: 1.5T401D Year of manufacture: 1994 Attachment load capacity: 2000 kg / as a clamp 1250 kg Gjdpezagpqefx Ag Tjuh Maximum pressure: 150 bar Attachment weight: 345 kg Charger included: Intelligent pulse charger Brand: MIDAC MIDATRON HF-S 48-130T Charger power supply: 3x400 V, 50-60 Hz, 12.1 A Maximum protection: 16 A, Output: 48 V / 130 A The Clark TM 15 N, a three-wheel electric forklift, is a compact and highly maneuverable lifting machine designed for intensive operation inside warehouses, production halls, and cold storage facilities. Thanks to its low profile and a design based on a single steerable rear wheel, the forklift can turn virtually on the spot. This feature makes it an ideal solution for the food, processing, bottling, and large-scale catering sectors, where maneuvering space between shelves or production lines is severely limited. A key advantage of this unit is its factory-installed, advanced hydraulic attachment from the German brand KAUP (clamp fork). It allows the operator to automatically and smoothly adjust the fork spacing directly from the cabin within a maximum width of 1700 mm and a fork length of 1200 mm. This function, combined with the clamping option, enables the safe transport of crates, pallets with non-standard dimensions, and bulk containers (e.g., crate pallets with vegetables or fruit). The 48 V electric drive ensures zero emissions, which is an absolute requirement for the machine to be used in a food environment and to meet sanitary standards.

Condition: used, functionality: fully functional, empty load weight: 8,810 kg, maximum load weight: 25,690 kg, overall weight: 34,500 kg, axle configuration: 2 axles, first registration: 03/2000, suspension: air, tire condition: 50 %, color: blue, M-Tec Mathis 146 Silo transporter 2 axles Overall length of trailer: 6.90 m Air suspension GVWR 34,500 kg - Payload 25,690 kg Tires: 50% tread remaining Net export price: 15,000.00 Euro All information subject to change without notice; errors and omissions excepted. Guedpfx Ajy Ud A Ssg Toh

Condition: new, Year of construction: 2022, functionality: fully functional, tank capacity: 700 l, usable tank capacity: 700 l, total length: 1,000 mm, total width: 1,200 mm, total height: 1,470 mm, overall weight: 187 kg, wall material: stainless steel, wall thickness: 1 mm, number of chambers: 1, manhole diameter: 400 mm, manhole location: top, We offer this new Thielmann KB5-GGU storage tank, silo, stainless steel silo. Guodoy Aft Uopfx Ag Tjh These are new, unused stainless steel bulk material silos. Liquid-tight Product data sheet available Manhole diameter: 400 mm Outlet diameter: 250 mm (DN 25) Minimum wall thickness: 1.5 mm Filling volume: 700 L Weight: 187 kg Stackable (load capacity 1710 kg) Completely made of stainless steel with a slide valve. Total: 350 units available If you have any questions or require further information, please feel free to send us a message or call us.

Condition: new, We offer roll-off containers / landscaping containers with a drive-over and spring-loaded rear door, a hydraulic drop gate, and a hydraulic French door, all in a spar-free design, available upon request. Delivery throughout Europe! Suitable for transporting heavy bulk goods and construction machinery. The only landscaping container with a clear / usable floor width of 235cm! ⚠️ Unfortunately, many dealers advertise with the Hardox brand name but do not use Hardox! We use exclusively "original" HARDOX® from the manufacturer SSAB! Our containers have a sticker with a QR scan code. You can use the number to check the "authenticity" of our products!!!! --- FINANCING --- LEASE PURCHASE --- LEASING --- -possible, please contact us!- Standard version in HARDOX HB450 Dimensions: 4.5 - 7.0m x 2.35 x 0.8m 4.5 - 7.0m x 2.35 x 0.95m 4.5 - 7.0m x 2.35 x 1.05m 4.5 - 7.0m x 2.35 x 1.15m 4.5 - 7.0m x 2.35 x 1.25m 4.5 - 7.0m x 2.35 x 1.35m 4.5 - 7.0m x 2.35 x 1.40m Suitable for systems according to DIN 30722-1 / 2 Tested and approved according to DGUV rule 214-017 Lifting bracket Ø 50 mm Hook height 1,570 mm DIN 30722-1 up to 15,000 kg GVW Material thicknesses "HARDOX HB450" Floor: 5mm Walls: 3, 4 or 5mm Cross member: INP 180 Or DIN 30722-2 up to 22,000 kg GVW Gjdpfxozhpkle Ag Tsuh -Rear door drive-over with spring relief -End wall raised / cab protection or alternatively flat -Closing profile made of square tubing -All-around tarpaulin and net hooks -Primed once on the inside, double coated on the outside -Double coated on the outside in a single color, RAL color of your choice Optionally available: -Standard wing doors -hydraulic rear door with wing doors -Drop gate, hydraulic or pneumatic mounted with piano hinge -Removable hinged flap "in the upper area" -Tie-down eyes in the floor -Roll tarp -Marcolin covering, manual or electric -Netting system for covering / load securing -Grain slide

Condition: used, Industrial Rotary Valve, Rotary Airlock Feeder, Used machine Manufacturer: Unknown / Industrial execution Type: 8-pocket rotary airlock Condition: Used, robust industrial execution Overall dimensions: 1000 x 630 x 770 mm Technical and operating parameters: Inlet size: 510 x 510 mm Outlet size: 510 x 510 mm Guedpezwfbxjfx Ag Toh Number of pockets/cells: 8 pcs Pocket/cell dimension: 490 x 200 x 200 mm Pocket/cell capacity: 9.8 liters Design / Operation: Heavy-duty rotary airlock feeder unit equipped with a large chain drive sprocket. Designed for controlled feeding and pressure sealing of bulk materials. Suitable Application Areas: Dust collection and filtration: Installation below cyclones, dust collectors, and bag filters for continuous dust discharge while maintaining system air seal. Bulk material handling: Uniform feeding of powders, granules, wood chips, pellets, sawdust, or feed materials from silos and hoppers. Agricultural and chemical industry: Metered discharging of dry granular and powdered raw materials into processing or packaging lines.

Condition: excellent (used), WOLFKING Industrial Meat Grinder – Stainless Steel WOLFKING industrial meat grinder, designed for the continuous grinding and size reduction of meat and meat products in high-capacity industrial lines. The equipment incorporates a large feed hopper that allows for bulk product input and controlled conveyance to the grinding system. Its robust construction and powerful drive are designed for continuous operation in professional meat processing facilities. The industrial configuration of this type of grinder allows for preparing the raw material with an adequate particle size before subsequent operations of mixing, emulsification, forming, cooking, or packaging. MAIN FEATURES -Manufacturer: WOLFKING -Type: Industrial meat grinder -Application: Meat and meat products -Continuous grinding -Large feed hopper -Automatic product feed to the grinding system -Feed screw system -Industrial cutting assembly -High-power electric motor drive -Controllable speed/operation -Primarily stainless steel construction -Robust structure for intensive use -Integrated control panel -Protections on moving parts -Designed for continuous industrial production -Integrable into complete meat processing lines PROCESS The meat is fed into the feed hopper, from where it is conveyed to the grinding mechanism. The feed system forces the product in a controlled manner towards the cutting assembly, where size reduction takes place before discharge to the next stage of the process. The final size of the product will depend on the installed plate, blades, and cutting configuration. It can be integrated with: Bin/cart lifters Feed conveyors Mixers Industrial cutters Emulsifiers Vacuum mixers Formers Stuffers Dosing systems Meat product preparation lines APPLICATIONS Gedpfozxwwhsx Ag Tjuh Especially suitable for slaughterhouses, cutting rooms, meat product manufacturers, meat processors, and prepared food plants that require a high-capacity solution for size reduction. Depending on the installed cutting system and the characteristics of the raw material, it can be used for beef, pork, poultry, and various meat preparations. The combination of WOLFKING technology, large hopper feed, and industrial construction provides a robust solution for continuous grinding and meat preparation processes. Machine available for inspection. Additional technical information, dimensions, cutting configuration, additional photographs, or videos can be provided upon request.

Year of construction: 2026, condition: new, The 3500L horizontal ribbon mixer is equipped with a special ribbon agitator located in the center of the tank along its entire length. The entire machine is made of 304SS stainless steel. - Capacity: 3500L - Motor: 15kW, 3-phase, 50Hz - Machine weight: 1300kg - Machine dimensions: (L: 3350 x W: 1410 x H: 2350mm) Godezuxv Ropfx Ag Touh - Mixers available from 400L to 3500L The mixer's interior and ribbon itself are highly polished, significantly simplifying and accelerating mixing and facilitating cleaning after use. These mixers are used for mixing bulk materials. They are primarily used in the chemical, food, pharmaceutical, agricultural, and construction industries.