Used Private for sale (296)

Condition: excellent (used), Year of construction: 2022, machine/vehicle number: 31.07.109.22, functionality: fully functional, operating hours: 1,200 h, power: 3 kW (4.08 HP), input voltage: 230 V, input current: 20 A, input frequency: 50 Hz, type of input current: DC, volume flow: 1,450 m³/h, intake vacuum (max.): 2,400 mbar, suction capacity: 3,200 m³/h, intake manifold diameter: 160 mm, filter area: 20 m², noise level: 70 dB, actuation type: pneumatic, total height: 2,005 mm, total length: 1,775 mm, total width: 898 mm, overall weight: 370 kg, year of last overhaul: 2022, Equipment: CE marking, documentation/manual, PRICING & CURRENCY NOTICE FOR UK BUYERS: Headline price is €5,000 due to platform limits. Actual price is fixed at £4,250 GBP. UK Buyers: Fixed at £4,250 GBP via BACS bank transfer. No conversions. Rjdozvh Dyepfx Adzecf Overseas Buyers: Must clear into our UK bank as exactly £4,250 GBP net of all fees. 📌 COLLECTION LOCATION NOTICE: The machine is NOT at our registered account/billing address. Location: Private workshop just outside West Calder (rural area), West Lothian, Scotland. Access: Ample space and suitable access for vans, flatbeds, and collection couriers. Full Address: Provided directly to the buyer upon formal agreement of sale. Overview & Provenance: For sale due to a complete workshop closure. This premium Felder RL 160 clean-air dust extractor was purchased brand new directly from an official Felder dealership. One private owner from new. Meticulously maintained and looked after in a clean workshop environment. Clear Title & Ownership: Originally financed through Novuna over a 4-year term. All payments are fully complete as of August 2026. The machine is sold with 100% clear title, free from any financial encumbrances or liens. Official settlement confirmation can be shown upon request. Rare Single-Phase Configuration: Factory-built single-phase (230V) machine. Maximum operational current draw of 19.7A (requires a 25A backup fuse circuit, typically running on a 16-amp industrial socket). Ultimate plug-and-play setup for high-end home workshops or sites without 3-phase power. Premium Factory Upgrades & Accessories: • Pneumatic Filter Cleaning: Factory-fitted Jet-Pulse automatic compressed-air cleaning system. Blasts dust from inside filters to ensure maximum, constant suction and extend filter life. • Integrated Mobile Chassis: Factory heavy-duty caster wheel kit for effortless movement. • Dry-Air Protection Kit: Inline moisture filter and integrated pressure gauge. Ensures air supply is clean, dry, and regulated, fully protecting filters from moisture damage. • Pneumatic Pipework: Extra lengths of plastic compressed-air piping included alongside currently fitted pipework for immediate setup. Technical Specifications: • Certification: H3 Certified (Residual dust < 0.1 mg/m³ for clean indoor workspace air). • Max Airflow: 3,200 m³/h • Intake Vacuum / Negative Pressure: 2,400 Pa • Extraction Port: 160 mm • Filters: Original Felder filters, used but in perfectly fine, clean operational condition. • Noise Level: Exceptionally quiet 70 dB operational sound pressure level. Transaction & Returns Terms: • Price: £4,250 (No VAT to add / Private Sale). • Payment: Strictly via secure Direct Bank Wire Transfer (BACS / IBAN / SWIFT). No PayPal, cheques, or cash-on-delivery couriers. • Shipping: Buyer must independently arrange, insure, and pay for all transport logistics. Machine released only once funds fully clear. • Returns: Private sale. Sold as described with no returns. Viewing and testing under power at the workshop is highly welcomed and encouraged.

Year of construction: 2017, operating hours: 100 h, condition: like new (used), functionality: fully functional, machine/vehicle number: 7250, For sale: OctoFrost 6/2RH freezing tunnel – practically new, available immediately! Are you looking for a solution to quickly increase production capacity without waiting months for a new machine? We have a unique offer for you. We offer an OctoFrost 6/2RH freezing tunnel – an extended version, which has only operated for 100 hours. The unit is in practically factory condition, has been professionally disassembled, is located in our warehouse, and is ready for immediate installation. Technical parameters: Rcedpszucihofx Adzof ✅ Manufacturer: OctoFrost ✅ Model: 6/2RH ✅ Version: extended ✅ Dimensions: 7100 × 3000 × 3000 mm ✅ Operating time: only 100 operating hours ✅ Refrigerant: ammonia (NH₃) ✅ Refrigeration system: pump system Product Performance Peas up to 3,600 kg/h Corn up to 3,200 kg/h Green beans up to 3,000 kg/h Carrots (diced) up to 3,000 kg/h Broccoli up to 2,700 kg/h Cauliflower up to 2,500 kg/h Strawberries up to 2,520 kg/h Raspberries up to 2,000 kg/h Blueberries up to 2,700 kg/h Cherries up to 2,600 kg/h Peppers (diced) up to 2,500 kg/h Mushrooms up to 2,600 kg/h Potatoes/fries up to 1,800 kg/h Meat (20 mm cubes) up to 2,340 kg/h Fish/seafood up to 2,300–2,500 kg/h Shrimp up to 2,300 kg/h The price includes a complete set: ✔ OctoFrost 6/2RH freezing tunnel ✔ Feeder ✔ Vibrator ✔ AUMA Somas valve station ✔ Control cabinet 💶 Price: 320,000 EUR – a complete, ready-to-install solution. Why is it worth it? ✔ practically new machine at a price significantly lower than a new device, ✔ immediate availability – without a long waiting time for production, ✔ proven OctoFrost technology, valued worldwide for its high IQF freezing quality, gentle handling of the product, and reliability, ✔ ideal solution for facilities planning to increase production capacity or modernize their lines. 🔧 We provide a start-up guarantee. Additionally, we offer the possibility of comprehensive connection, commissioning, and technical support by our company, NGS Serwis. This way, you receive not only the equipment but also professional installation and the assurance of trouble-free production start-up. If you are looking for a premium-class IQF tunnel that is practically new, fully equipped, and available immediately, this offer is a unique opportunity. Please contact us via private message or email to obtain a detailed specification, additional photos, and to arrange a demonstration of the equipment.

Condition: excellent (used), functionality: fully functional, Year of construction: 2023, operating hours: 200 h, control type: CNC control, controller model: FSCUT, laser type: fiber laser, laser power: 3,000 W, sheet thickness (max.): 20 mm, sheet thickness steel (max.): 20 mm, sheet thickness stainless steel (max.): 8 mm, sheet thickness aluminum (max.): 8 mm, sheet thickness brass (max.): 8 mm, sheet thickness copper (max.): 8 mm, table length: 2,000 mm, table width: 1,000 mm, working length: 2,000 mm, working width: 1,000 mm, type of cooling: water, overall weight: 1,500 kg, Equipment: cooling unit, emergency stop, fume extraction, Z1313 CNC Fiber Laser – 3 kW – Year of manufacture 2023 – only 200 hours of operation – 2000×1000 mm – Private sale – €35,000 Description For sale is a Z1313 CNC fiber laser, manufactured in 2023, from a private owner. The machine has only been used privately, has approximately 200 hours of operation, and is in very good, fully functional condition. Ideal for metalworking, workshops, prototyping, small series production, and precise cutting work. Technical data Model: Z1313 Laser power: 3 kW fiber laser Working area: 2000 × 1000 mm Year of manufacture: 2023 Hours of operation: approx. 200 Condition: very good, ready for immediate use Control: CNC system including operating monitor Software: CypCut cutting software (FSCUT controller) DXF/AI/SVG import Automatic nesting Material library Height control (BCS system) Cooling: 3 kW chiller Extraction: available Control cabinet: complete Accessories: various tools, clamping devices, small parts Reason for sale: No longer needed Redszrfryspfx Adzjcf Special features: Private sale → no VAT, no guarantee

Condition: good (used), functionality: fully functional, machine/vehicle number: 901, travel distance X-axis: 370 mm, travel distance Y-axis: 470 mm, travel distance Z-axis: 405 mm, spindle speed (max.): 2,000 rpm, spindle speed (min.): 75 rpm, table length: 500 mm, table width: 380 mm, spindle mount: MK 2, total height: 2,000 mm, total length: 1,590 mm, total width: 1,290 mm, quill stroke: 155 mm, Jig boring mill, fine boring mill, plate boring mill, table boring mill, boring mill. -Jig boring machine: including tool cabinet with various tools -Table dimensions 380 x 500 mm -Travel: Z 405 mm/Y 470 mm/X 370 mm Rsdezrmf Ispfx Adzjcf -Quill stroke: 155 mm -Take: MK2 (plus outer cone for spindle tool) -Speeds: 75 - 2000 rpm -Machine dimensions: 1590/1290/H2000 mm -Machine weight: 1774 kg -Cabinet dimensions: 720/460/H1000 mm -Cabinet weight: 158 kg Price negotiable Rotary table shown in one of the pictures not included Worldwide shipping can be arranged at additional charges

Condition: good (used), mileage: 797,929 km, power: 257 kW (349.42 HP), first registration: 12/1976, fuel type: diesel, tire size: 315/80R22.5, axle configuration: 6x2, wheelbase: 3,400 mm, fuel: diesel, color: blue, driver cabin: sleeper cab, gearing type: mechanical, suspension: steel, permissible axle load (axle 1): 6,500 kg, permissible axle load (axle 2): 17,500 kg, Year of construction: 1976, Scania LB140 V8 350 HP 6x2 Oldtimer - Perfect condition - Privately owned/No VAT MY: 30-12-1976 KM: 797,929 VIN: 497936 Perfect condition Clean interior and exterior Vertical exhaust stack 6x2 with bogie axle Custom bumper Leather interior = Additional Information = Technical Information Number of cylinders: 8 Gross vehicle weight: 23,500 kg Axle configuration Suspension: Leaf spring Front axle: Tire size: 315/80R22.5; Max. axle load: 6,500 kg; Steering axle; Tire tread left: 80%; Tire tread right: 80% Rear axle 1: Dual tyres; Max. axle load: 17,500 kg; Left inside tire tread: 80%; Left outside tire tread: 80%; Right inside tire tread: 80%; Right outside tire tread: 80% Rear axle 2: Dual tyres; Lift axle; Left inside tire tread: 80%; Left outside tire tread: 80%; Right inside tire tread: 80%; Right outside tire tread: 80% Environment Emission standard: Euro 0 Condition Technical condition: good Visual condition: good Rodpfx Adsvdyamszjcf Further information Contact VAEX The Truck Traders for more information.

Condition: used, power: 67 kW (91.09 HP), next inspection (TÜV): 02/2027, Year of construction: 2005, operating hours: 9,560 h, Equipment: air conditioning, all wheel drive, cabin, German tractor, in use until recently. Second owner, both times government park administration: from 2005 to 2017, and from 2017 to 2026. All-wheel drive. 4-cylinder turbo diesel engine with 4485 cc and 91 hp. Large 24-speed Hi-LO transmission, 4 gears in 3 ranges, 2 powershift stages, and powershift reverser. 40 km/h maximum speed. Air brake system. Comfort cabin with air-suspended driver's seat and air conditioning. Rear PTO with 3 speeds (540/750/1000 rpm). Category II rear hitch with quick couplers and auxiliary lift cylinders (5060 kg capacity). Quick-adjustable height towing hitch. 2 mechanical control units (switchable between single- and double-acting). Front PTO and front hydraulics were retrofitted to the new tractor in 2005. Unladen weight: 4,250 kg. Permissible total weight: 6,200 kg. Registration as "LOF agricultural tractor". Rcedpfx Adey Ean Sszsf Transport dimensions: length 4.36 m / width 2.29 m / height 2.64 m. Front tires: 360/80R24. Rear tires: 440/80R34. All tires are in good condition. According to the vehicle registration supplement, various alternative tire combinations are permitted. The tractor is operational; deregistration scheduled for 16.04.2026. Inspection (TÜV) valid until 02/2027. This offer is only valid for commercial businesses, farmers, foresters, and similar self-employed individuals. Secondary occupation is sufficient. The offer is also valid for government agencies. Sale to private end consumers is strictly excluded. Subject to prior sale and possible errors. Net price: €20,900.

Condition: used, Year of construction: 1995, functionality: fully functional, power: 11 kW (14.96 HP), input voltage: 400 V, input frequency: 50 Hz, planing width: 530 mm, rotational speed (max.): 4,400 rpm, We are selling our robust MAKA AD 530 A planer and thicknesser. This machine is from 1996 and is ideal for carpentry shops, joineries, and woodworking businesses. Equipment and technical data: Manufacturer: Griggio / Distributed by MAKA Type: AD 530 A Year of manufacture: 1996 Planing width: approx. 530 mm Tersa cutterhead Articulated pressure bar Auxiliary fence Main motor: 5.5 kW Feed motor: 0.18 kW Connection: 380 V / 50 Hz / Three-phase Machine No.: 9405190 Rcsdpszu Sdnsfx Adzof Heavy-duty and durable industrial machine Important: Collection is only possible once our new machine has been delivered. This is expected to be around mid-September. By arrangement, the machine can be inspected and tested on site beforehand. Due to its size and weight, the machine is preferably sold for self-collection. Assistance with loading can be arranged in advance. Private or commercial sale with exclusion of warranty, guarantee, and right of return. All information is provided to the best of our knowledge and without guarantee.

Condition: used, mileage: 6,580 km, power: 37 kW (50.31 HP), gearing type: mechanical, fuel type: diesel, color: red, number of seats: 1, first registration: 01/1962, Year of construction: 1962, driver cabin: other, Vehicle location: Bovenden, If you have any questions, please call ! Color: red Synthetic leather: red 50 HP Original exhaust (see sample photo, last) available| original exhaust (attached photo, last) available This Master belonged to a large and well-kept private collection. All of the older gentleman's vehicles were stored indoors. Due to its age, he has decided to part with this vehicle. Beautifully preserved, this tractor is waiting for its new owner. ACCESSORIES WITHOUT WARRANTY, subject to alterations, prior sale and errors excepted! Rjdpfx Adjvhhz Hezocf - .

Condition: used, mileage: 14,800 km, power: 80 kW (108.77 HP), first registration: 03/1997, fuel type: gasoline, overall weight: 3,500 kg, next inspection (TÜV): 11/2027, color: red, gearing type: mechanical, emission class: euro1, number of seats: 6, total length: 5,115 mm, total width: 2,140 mm, total height: 2,450 mm, loading space length: 1,950 mm, loading space width: 2,100 mm, loading space height: 1,480 mm, Year of construction: 1997, 1st owner. Only 14,800 total kilometers driven originally. In full service with the fire department until March 2026. Shortly thereafter, driven to us on the highway for approximately 250 kilometers without any issues. Valid TÜV (German vehicle inspection) until November 2027 (passed at DEKRA with 14,535 km, “no defects found”). Major engine service with all fluids, new timing belt, new water pump, new spark plugs, etc., in February 2025 at 14,057 km, documented with a receipt of €2311.19 from a car repair shop. TSF (fire department vehicle) superstructure with roller shutters and ladder mounts on the roof. 6 seats and 4 doors. Power steering. 2.0-liter gasoline engine with 109 hp and G-CAT catalytic converter. Emission code: 93/59/I GKL:G1 (31), which means it qualifies for the green environmental badge. 5-speed manual transmission. Rcjdpfx Aoy Upbmodzsf Unladen weight: 2267 kg. Permissible total weight (original from the factory and never changed): 3500 kg. Overall dimensions of the vehicle (exterior): length 5115 mm / width 2140 mm / height 2450 mm. Vehicle with minor paint damage and signs of wear. Overall in good condition. Approved for road use with the original German documents continuously until April 2026. Immediately ready to drive. The illustrated retractable TS (pump) can remain in the vehicle after consultation. The pump has an oil leak and is not fully operational. The TS will not be sold separately. This offer is only valid for commercial businesses, self-employed individuals, and freelancers of all kinds, as well as for authorities/emergency services. Sales to private end consumers are unfortunately not possible. Subject to prior sale and errors. Differential taxation according to §25a UStG (value-added tax cannot be shown separately and will not be added).

Condition: used, mileage: 28,000 km, power: 63 kW (85.66 HP), first registration: 07/1979, fuel type: diesel, overall weight: 6,500 kg, next inspection (TÜV): 07/2027, color: red, gearing type: mechanical, number of seats: 9, total length: 6,000 mm, total width: 2,370 mm, total height: 2,750 mm, loading space length: 2,730 mm, loading space width: 2,270 mm, loading space height: 1,630 mm, Year of construction: 1979, 1st owner. Meticulously maintained and thoroughly restored vintage vehicle. Registered until 2026 and part of the regular fleet of a German industrial operation. Always parked in a modern heated fire station and regularly driven. The Mercedes was completely overhauled and repainted in 2002. Technical inspection (TÜV) valid until 07/2027, renewed just 130 kilometers ago. LF8 fire engine with ZIEGLER body and front-mounted FP8/8 pump. WITHOUT fixed water tank! Redpfxsy Euw Uj Adzocf OM314 industrial diesel engine with 3,758 cc displacement. 5-speed manual transmission. Top speed: 82 km/h (no faster, but you always reach your destination reliably, no matter how long the journey). Large crew cabin. 9 seats. 4 doors. Storage compartments under the rear benches, charging trays for hand lamps, shore power connection for battery maintenance. Registered unladen weight: 4,070 kg. (Cannot be reduced further, as trucks of this era were simply built sturdier and with more materials!) Gross vehicle weight: 6,500 kg. Tires from 2013, winter tires 8R17.5, almost full tread and not cracked, in good condition. 1 spare wheel mounted on the roof. Modern rearview camera with monitor retrofitted. Two tow hitches: 1. Ball hitch for passenger car trailers. 2. Small pintle hook. Drawbar load: 150 kg and towing capacity: 1,500 kg. These values apply for both braked and unbraked trailers. This LP is in particularly good original condition, starts immediately and runs perfectly. Countless new parts and all necessary investments have been made in this truck to the very end. In recent years, for example, the fuel tank has been replaced, brake system overhauled, starter batteries (2024), and the gearbox fully rebuilt. A partial set of equipment is included in the sale, at no extra cost: 4-part aluminum extension ladder, suction hoses, adapters, suction strainers, multi-purpose nozzles, hose bridges, breaker hooks and axes, 1,500-watt spotlight, first aid kit, and small parts. Vehicle is immediately ready for operation, regularly serviced, no oil leaks, no repair backlog—a fine vintage truck without power steering and without seatbelts. Classic truck driving as it used to be. This offer is valid only for business customers, freelancers of any kind, and public authorities / emergency services. We do not generally sell to private end users. Subject to prior sale and possible errors at any time. The net price for this beautiful LP 709 is €7,900.00.

Condition: good (used), Year of construction: 1986, functionality: fully functional, machine/vehicle number: 8220, Hermle UWF 801 Universal Tool Milling Machine with extensive accessories Manufacturer: Hermle Model: UWF 801 Year of manufacture: approx. 1986 Tool holder: SK40 Digital display: Heidenhain 3-axis digital display Rjdszd Tbajpfx Adzscf Description For sale is a Hermle UWF 801 universal tool milling machine from the in-house mold-making department of a medium-sized company specializing in plastic-bonded magnetic materials. The machine was used in production until the site was closed, for the manufacturing, processing, and maintenance of injection molds. It operated precisely and reliably until the very end and comes from a production environment with high requirements for accuracy and quality. Equipment ● Universal swiveling milling head ● Horizontal milling attachment ● Heidenhain 3-axis digital display ● Automatic feeds ● Coolant system ● Central lubrication ● Machine lighting ● Tool holder SK40 Scope of accessories The scope of delivery includes an extensive accessories package, including: ● numerous SK40 tool holders ● collet chucks ● collet sets ● milling arbors ● machine vice ● dividing head / rotary table accessories ● other tools and clamping accessories, as shown in the pictures Condition: The machine is in good, age-appropriate condition. It was used until the site was closed and then stored. This offer is a private sale. No guarantee is given. Inspection by appointment is highly recommended. Location Bergisch Gladbach near Cologne Loading Loading possible by arrangement. Price €5,900

Condition: excellent (used), Year of construction: 2009, Private sale: Hymermobil with numerous extras. Features include 2 air conditioning units, 2 auxiliary heaters (diesel, gas, and electric), ceramic toilet with 2 cassettes, rear garage, first registration 24.08.2009. Rcedpfepl Sngex Adzef Other highlights: drop-down bed, leather upholstery, shower, 2000-watt generator with dedicated built-in petrol tank (operable from inside above the oven), 4 solar panels, 1 vehicle battery and 3 habitation batteries (1 year old), 3,300 kg towing capacity. Iveco chassis with automatic transmission, cruise control, 5,400 kg permissible gross weight, 100 km/h speed approval, 2 heated external drawers, underfloor heating and hot water operated via gas or electricity. Includes 2 gas bottles with automatic switchover, twin rear tires, only 78,000 km driven. External shower with hot water, Goldschmitt rear air suspension, rear single beds with option for a full-width sleeping surface (2 additional sections, both long and short available). Automatic satellite system, 2 TVs. Vehicle inspection valid until May 2026 without defects. Approved for transport of up to 8 persons. First registration 24.08.09, 130 kW diesel, very economical—current consumption at 100 km/h is 12.1 l/100 km, at 80 km/h only 10 l/100 km. Vehicle length: 8.19 meters. Additional locks on entry door, separate driver’s cab door, and both garage doors. Reversing camera with multiple viewing angles. Large air awning, kitchen cabinets, carpet, etc., for outdoor use available and can be included if interested.

Year of construction: 2022, condition: like new (used), functionality: fully functional, machine/vehicle number: P25291, Please provide us with your offer price. Sales only within Europe, including Turkey. Rcedpfozmqlhex Adzsf Price excludes packaging; delivery condition: FCA (machine location). ===== Technical data can be found in the attached handout. Any warranty is excluded. We assume no liability for the accuracy of the technical data and year of manufacture, for the completeness of accessories and tool equipment, or for compliance with all safety and environmental protection requirements mentioned in the accident prevention regulations. No sales to private individuals.

Condition: good (used), Year of construction: 2004, machine/vehicle number: 3234, (Please tell us your offer price) Sale only within Europe, incl. Turkey Price without packaging; delivery condition: FCA (machine location) ===== Technical data see handout. All warranty rights are excluded. Rcsdpozluyasfx Adzef For the correctness of the technical data and year of construction, for the completeness of accessories and tool equipment, and for compliance with all safety and environmental protection requirements specified in the accident prevention regulations. No sale to private individuals. Sales only within Europe, incl. Turkey Price without packaging; Delivery condition: FCA (machine location) ===== Technical data please see handout in attachment. German text leading language. Without any guaranty and warranty, including completeness of tools & accessories as well as environmental and safety regulations. No private sales.

Condition: used, Year of construction: 2014, functionality: fully functional, Equipment: Rcedpfx Adszh I R Dszef Laser microscope Control computer (Windows 7) Objective lens CF Plan 10x / 0.30 NA Objective lens CF Plan 20x / 0.46 NA Objective lens CF Plan ELWD 50x / 0.65 NA Objective lens CF Plan Apo 150x / 0.95 NA Suitable for general high-resolution 3D visualization, roughness measurement (profiles and surfaces), step analysis, 2D dimensions, etc. High degree of automation in the evaluation process through an Excel-based "VK Viewer". Inspection possible in 66540 Neunkirchen. Pickup only. I am happy to provide a four-hour training session upon pickup. The software is quite intuitive. Private sale. VAT not shown.

Condition: excellent (used), Year of construction: 2016, functionality: fully functional, operating hours: 200 h, power: 4.5 kW (6.12 HP), input voltage: 380 V, type of input current: three-phase, travel distance X-axis: 1,800 mm, travel distance Y-axis: 4,500 mm, travel distance Z-axis: 1,050 mm, number of axes: 4, controller manufacturer: Syntec, total height: 3,600 mm, total length: 5,800 mm, total width: 2,440 mm, overall weight: 2,600 kg, table length: 5,400 mm, table width: 2,030 mm, For sale is a large-format, 4-axis CNC portal milling machine from Yishun, privately owned. With its enormous working area and 1050 mm Z-axis, the machine is ideal for the precise machining of large components made of foam (Ureol/Styrodur), plastics, wood, and aluminum (e.g., for mold making, boat building, or prototype construction). The machine has only been in operation for approximately 200 hours (year of manufacture 2016) and will be handed over in perfect mechanical and electrical condition. High-quality industrial components have been used throughout. TECHNICAL DATA & COMPONENTS: • Working area (X/Y/Z): 1800 mm x 4500 mm x 1050 mm • External dimensions: approx. 5800 mm x 2440 mm x 3600 mm (L x W x H) • Weight: approx. 2600 kg • Spindle: High-quality HSD spindle • Drives: Reliable, powerful Yaskawa servo motors Rcodpjzv U Tbofx Adzsf • Controller: Syntec controller (machine can be moved on-site) • Guides & Mechanics: HIWIN linear guides, WMH rack and pinion with precise Rouist gears on the servo motors, ball screw in the Z-axis feed • Equipment: Integrated zero-point sensor for the Z-axis. Post-processors for HSMtec are available to a limited extent. • Reference: The finely finished aluminum milling sample produced on the machine, shown in the video, is available (see photos). • Note on scope of delivery: The machine does not have an automatic tool changer, dust extraction system, or vacuum clamping table. CONDITION & HISTORY: The machine has been unused but stored dry in a hall for the past few years. To consistently prevent the onset of surface rust due to natural humidity in the winter, the steel structure was recently preventively re-primed and painted. The guides are completely free of rust and have been regularly preserved. The machine runs perfectly mechanically and electrically. IMPORTANT INFORMATION REGARDING TRANSPORT & PICK-UP: 1. Private sale: The sale is made by a private individual, excluding any liability for defects, warranty, or right of return. No VAT can be charged. Purchased as seen and tested. 2. Loading assistance on-site: A suitable forklift will be arranged and can be used free of charge for loading onto your low-bed trailer or truck. 3. Transport options: The machine is primarily intended for self-collection. Delivery within a close radius (up to 50 km) is possibly possible after prior arrangement and upon payment of costs. If transport over longer distances is an issue, we will certainly find a joint solution after prior consultation or provide assistance in finding a freight forwarder. We are open to realistic price offers. An inspection and demonstration of the axes on-site in 91183 Abenberg are welcome after prior arrangement.

Condition: excellent (used), Year of construction: 2018, operating hours: 13,500 h, functionality: fully functional, machine/vehicle number: 138855-100, Sales only within Europe, including Turkey. Price excludes packaging; delivery condition: FCA (machine location). ===== For technical data, please refer to the handout provided. Any warranty or guarantee is excluded. Rcodpfoy Dgl Usx Adzef We do not assume liability for the accuracy of the technical data or year of manufacture, the completeness of accessories and tooling, or compliance with all safety and environmental protection requirements specified in accident prevention regulations. No sales to private individuals.

Condition: good (used), Year of construction: 2007, operating hours: 49,000 h, functionality: fully functional, (Please tell us your offer price) Sale only within Europe, incl. Turkey Price without packaging; delivery condition: FCA (machine location) ===== Technical data see handout. All warranty rights are excluded. For the correctness of the technical data and year of construction, for the completeness of accessories and tool equipment, and for compliance with all safety and environmental protection requirements specified in the accident prevention regulations. No sale to private individuals. Sales only within Europe, incl. Turkey Rcodpfx Aexdih Njdzef Price without packaging; Delivery condition: FCA (machine location) ===== Technical data please see handout in attachment. German text leading language. Without any guaranty and warranty, including completeness of tools & accessories as well as environmental and safety regulations. No private sales.

Condition: used, mileage: 153,000 km, power: 70 kW (95.17 HP), first registration: 12/1992, overall weight: 3,200 kg, fuel type: diesel, color: red, next inspection (TÜV): 12/2025, gearing type: mechanical, Year of construction: 1992, total length: 5,345 mm, total width: 1,975 mm, total height: 2,680 mm, number of seats: 9, Equipment: had accident, parking heater, Original German vehicle. In service with a small municipality until 2026, initially used by the fire brigade and then by the municipal works department. Rcsdoyx N Hqopfx Adzof This vehicle has civilian truck registration as a "box body truck" and is officially rated for 9 seats in the registration papers. The vehicle was originally operated as a multi-purpose vehicle (MZF), and afterwards was used to transport the municipality’s lawn mower. Only 1 bench seat is permanently mounted. 2 of the 3 bench seats were not used in recent years and are included loose. The original seat belts and mounting bolts are also supplied. A fold-out table with a radio handset is still installed on the left side, and a genuine large fire brigade first aid kit is integrated into the fit-out. OM 602 engine, 5-cylinder naturally aspirated diesel with 2874 cc. The engine always starts perfectly and runs cleanly at first, but after about 20 seconds at idle the running characteristics at idle worsen significantly and smoke develops. Once warmed up, the smoke subsides and the engine runs cleanly again, almost normally. The engine is either heavily worn or there is engine damage. No precise diagnosis so far. The vehicle drives immediately and functions well; typical engine power was fully and consistently available during a brief test drive, but we do not guarantee roadworthiness. A repair is certainly necessary in the near term! For driving short distances or boarding a RORO ship at port under its own power towards Africa, this 310 D appears completely unproblematic. 5-speed manual transmission. 127 km/h top speed. Tow hitch (ball head) with a braked trailer load of 2,000 kg or 750 kg unbraked. Power steering. Factory-installed auxiliary heater Mercedes/Eberspächer (working). Bodywork has isolated rust spots; overall, due to years of storage indoors, the vehicle is still in comparatively good condition. The passenger door window is broken and covered with a film. The paint below has previously been touched up in black. The vehicle clearly received very good maintenance while with the fire brigade—unfortunately, this was not maintained afterwards. Opening the sliding door mechanically deploys a large step. Unladen weight: 2,370 kg. Gross vehicle weight rating: 3,200 kg. External overall vehicle dimensions: Length 5,345 mm / Width 1,975 mm / Height 2,680 mm. The tires (205R14C) are from 2013 and not cracked, tread depth approx. 50-60%. The vehicle is primarily intended for export or for genuine fans of the Bremen transporter who are looking for a completely unvarnished basis for restoration. MOT expired 12/2025, will not be renewed. We do not have our own workshop. We have deliberately priced the vehicle attractively, as genuinely good comparable vehicles are now usually being traded for double or even higher prices. A personal inspection is highly recommended due to the defects and can be arranged by appointment. This offer is only valid for businesses, freelancers, and public authorities of any kind. Sale to private end users is strictly excluded. Subject to prior sale and errors. The purchase price is gross = net, with no VAT incurred (according to §25a of the German VAT Act / margin scheme).

Condition: excellent (used), Year of construction: 2017, functionality: fully functional, Equipment: documentation/manual, For sale: Complete PET bottle blowing line TES BluLine4 HiTech MultiFlex (2017) We offer for sale a complete PET bottle production line from the renowned manufacturer TES Sp. z o.o., model BluLine4 HiTech MultiFlex, manufactured in 2017. The machine is in very good technical condition, regularly used, and ready for further operation. Technical data Manufacturer: TES Sp. z o.o. Model: BluLine4 HiTech MultiFlex Rjdpfxozd Sb Sj Adzjcf Year of manufacture: 2017 Bottle capacity range: 0.5 l – 4 l Number of cavities: 2-4 The line includes: ✅ Preform feeder ✅ PET bottle blowing machine ✅ Bottle packer for trays Advantages of the equipment Complete and ready-to-use production line Universal range of produced capacities Solid construction and proven TES technology Very good technical condition Ideal for manufacturers of beverages, water, household chemicals, and other products packaged in PET bottles Price: negotiable. If you have any questions or would like to obtain additional information, please contact us by phone or private message. We will gladly provide detailed information and send additional photos of the equipment.

Condition: used, mileage: 1,001 km, power: 9 kW (12.24 HP), gearing type: mechanical, fuel type: diesel, color: red, empty load weight: 870 kg, tire size: 8-24, number of seats: 1, first registration: 07/1954, Year of construction: 1954, driver cabin: other, Vehicle location: Bovenden, approx. 5,000 operating hours, the vehicle has spent recent years in a private collection and was occasionally used for outings. The tractor originally comes from Belgium, where it was likely also restored. New battery, new tires. Equipment details provided without guarantee; subject to alteration, prior sale, and errors! Rcsdpfx Ajxcp Tpsdzjf

Condition: new, Year of construction: 2026, functionality: fully functional, total height: 850 mm, total length: 3,000 mm, total width: 1,500 mm, table height: 850 mm, table width: 1,500 mm, overall weight: 800 kg, height adjustment type: mechanical, Welcome, The welding table manufacturer, ATRIBU, offers a new welding table designed for both professional industrial environments and demanding hobbyist workshops. Short Description: DIMENSIONS: Tabletop: 3000 x 1500 mm with 200 mm high side walls. Both tabletop and side walls are 15.0 mm thick. HOLE SYSTEM: Precision-milled and chamfered holes, System 28 mm, 100 x 100 mm grid, with engraved scale/grid. MATERIAL: S355 J2+N Steel (high-strength structural steel). REINFORCEMENTS: Internal ribbing (160 x 6 mm plates) spaced every 40 cm for maximum stability. TOLERANCES: Maximum deviation of 0.5 mm per meter length. Maximum angular deviation of 0.5°. LEGS: 80 x 80 x 3 mm profiles, bolted, height-adjustable with swivel feet. Height adjustment range: 85–90 cm. PRICE: The price includes the table with standard metal-profile legs (wheels are not included in the base price). Swivel castors in various load capacities are available as an option for an additional fee. Full VAT invoices are issued. Detailed Description: Our tables are manufactured from high-grade S355 J2+N steel. The use of harder structural steel significantly reduces premature hole wear and ensures maximum structural durability. All holes are precision-milled and chamfered for optimal fit and tooling quality. Side walls are also made of S355 steel and feature a double row of holes. Table flatness remains within a maximum tolerance of 0.5 mm per meter. For tables of this size, we typically achieve a flatness of 0.2 mm per meter, ensuring near-perfect surfaces. The tabletop is protected with a mill scale layer for initial corrosion resistance. Additionally, each table is treated with a professional anti-spatter agent with a corrosion inhibitor prior to shipment. [Our welding tables are not plasma nitrided.] Robust internal ribbing provides necessary rigidity, even when welding heavy or complex assemblies. We also supply a full range of professional tools and accessories. Shipping: Affordable shipping across Europe is available (approx. 50–300 EUR depending on table dimensions). VAT Information: For private customers: Local VAT rates apply. Intra-community supply (B2B): With a valid EU VAT number, purchase at 0% VAT is possible. Custom Orders & Other Systems: Need a different size or thickness? We are happy to design and manufacture a customized solution for your requirements. Available Systems & Specifications: Hole Systems: System 28 / System 16 Tabletop Thicknesses: 8.0 mm / 12.0 mm / 15.0 mm Standard Sizes: 1200 x 800 mm 1200 x 1200 mm 1800 x 800 mm 2000 x 1000 mm 2400 x 1200 mm 3000 x 1500 mm Rcedpfx Adsy Atrxjzsf Options: Wheels with 300 kg or 100 kg load capacity, HEX grid (additional holes), 50 x 50 mm grid. Available Accessories: Table extensions, towers, clamps, squares, bolts, accessory organizers, and more. Note: Welding tables are supplied without accessories. Please consult our catalog to select your tooling set. How to Order / Contact Us: Inquiry: Please send us an email with your requirements (size, thickness, etc.). We highly recommend requesting our comprehensive catalog, as selecting the right accessory set is essential for efficient work. Order: Once you’ve finalized your configuration, orders can be placed via email. We look forward to hearing from you! We welcome both long-term cooperation and single orders. Best regards, Team ATRIBU

Condition: good (used), Year of construction: 2012, (Please provide us with your offer price.) Sales only within Europe, including Turkey. Price excludes packaging; delivery condition: FCA (machine location). ===== Two machines of the same type are being sold. Year of manufacture: 2012 and 2015. Rcodpfxey Ty Hdj Adzof Technical data can be found in the attached handout. Any warranty rights are excluded. We assume no liability for the accuracy of the technical data and year of manufacture, for the completeness of accessories and tool equipment, or for compliance with all safety and environmental protection requirements mentioned in the accident prevention regulations. No sales to private individuals.

Condition: used, mileage: 451,000 km, power: 115 kW (156.36 HP), fuel type: diesel, gearing type: mechanical, overall weight: 7,490 kg, first registration: 07/2008, next inspection (TÜV): 05/2026, loading space length: 6,000 mm, loading space width: 2,410 mm, emission class: euro4, color: yellow, number of seats: 3, Year of construction: 2008, total length: 8,020 mm, total width: 2,420 mm, total height: 2,750 mm, Equipment: ABS, soot filter, German vehicle, recently in service, deregistered as of 06/2026. Euro 4 engine, BLUETEC 4 / Green emissions sticker. 6-speed manual transmission. 3 seats. Suspension: leaf spring. Eurotechnik / Valinski sliding platform with remote control. Platform length 6.00 m, of which approximately 5.60 m is usable. Overall width 2.41 m. Usable interior width 2.32 m. The main platform level is approximately 1.15 m high (= loading area height). UVV (occupational safety) certificate valid until 09/2026, according to the inspection sticker. RAMSEY RPH8000-7 winch, can be moved laterally, pulling force 3500 kg. 2 auxiliary start sockets (each for 12 V and 24 V). Various plastic storage boxes. Rcedpfx Adezfdgvozef Registered as "Other Motor Vehicle, Breakdown Assistance". Unladen weight according to vehicle registration: 5480 kg. Permissible total weight: 7490 kg. Can be driven with the old driver's license class III. Any German driver's license holder who obtained this car driver's license before 1999 and has held it continuously may drive the Atego immediately. Trailer hitch with car tow ball, 3500 kg trailer load (braked) / 750 kg (unbraked). Wheelbase: 4250 mm. Overall vehicle dimensions: length 8.02 m / width 2.42 m / height 2.75 m. TÜV (technical inspection) expired 05/2026. Known issues, without claiming completeness: front tires are at the wear limit. Brake warning light on the dashboard is illuminated. The Atego starts immediately and runs smoothly. It drives well and reliably. We ourselves transported the tow truck on a longer stretch of highway in June 2026 without any problems. This offer is only valid for commercial businesses, freelancers, and authorities/emergency services of any kind. Sale to private end consumers is excluded. Subject to prior sale and errors. Net price for the sliding platform tow truck, Mercedes Atego 816 Bluetec4, as shown: 24,900 EUR!

Condition: used, mileage: 55,341 km, power: 124 kW (168.59 HP), first registration: 08/1990, overall weight: 7,490 kg, fuel type: diesel, color: red, gearing type: mechanical, loading space width: 2,430 mm, loading space length: 3,000 mm, loading space height: 1,600 mm, Year of construction: 1990, total length: 7,700 mm, total width: 2,480 mm, total height: 3,000 mm, number of seats: 9, Equipment: all wheel drive, parking heater, Good condition and fully functional, no need for repairs. +++ Vehicle is roadworthy ++ Power steering ++ 7.5t possible with H-certificate +++ Fresh inspection carried out with brake fluid change, lubrication, and new fuel filters. Additionally, the air dryer cartridge and wiper blades have been replaced. Both starter batteries renewed, and fluid levels of all components checked and topped up as necessary. Rodpfx Adsy I Huwszjcf The front-mounted pump has been removed; the openings in the radiator grille and bumper were professionally sealed. This 1113 runs very well and is ready for immediate collection. 9 seats (private registration as a truck allows for 6 seats), All-wheel drive 4x4, center and rear-axle differential lock, towing ring 1.5t. Transfer case with off-road reduction and differential locks, walk-in equipment box with equipment mounts, Wheelbase (axle spacing) 4,200 mm +++ Maximum speed according to documents: 85 km/h, actual speed by GPS: 88 km/h Cabin interior dimensions behind the driver’s seat (LxWxH) in mm: 1560 x 2180 x 1460 Box exterior dimensions (LxWxH) in mm: 3130 x 2400 x 1500 Box interior dimensions (LxWxH) in mm: 3050 x 2400 x 1450 —Subject to change, prior sale, and errors— ?191?