Used Bulk for sale (1,317)

Condition: excellent (used), Year of construction: 1998, total length: 7,150 mm, total width: 2,550 mm, total height: 2,670 mm, UBH Universal Bulk Handling 31,345L, 20FT tank container / swap body, Hnedpexvyc Ijfx Ag Uog bottom discharge, steam heating, insulated, 5-year inspection / CSC valid until: 04-2028 = Further Information = General Information Year of manufacture: Dec. 1998 Model year: 1998 Weights Unladen weight: 4,250 kg Payload: 31,750 kg Gross weight: 36,000 kg Functional Load compartment dimensions: 715 x 255 x 267 cm Load compartment capacity: 31,122 l Superstructure brand: UBH Universal Bulk Handling Number of chambers: 1 Condition Technical condition: very good Visual condition: very good Further information Please contact Arne Honingh for more information.

Condition: good (used), Year of construction: 2002, machine/vehicle number: Egli V1, Make : EGLI Model : V1 Usage : Frozen Block cutter for butter and similar products Hodpfxjfmgv Hj Ag Ueng High speed Cutter Electrics : 3~ / 400 v/50hz Air : 6 bar -8bar Safety Door with air operated actuator The machine is used by adding in the butter blocks and the door closes automatically, the piston applies pressure to the block pushing this towards the cutting divide that rotates at high speed . The butter pieces are dropped below the machine into stainelsss steel hopper or silo .

Condition: excellent (used), 21 Bulk Storage Siloes for sale. Sizes and specifications as pictured and attached documents. All stored and available for immediate sale. Come complete with filters and loadcells. Hnedeu I Rntjpfx Ag Uog

Condition: used, axle configuration: 3 axles, first registration: 01/2000, color: other, Year of construction: 2000, Empty weight: 6.960 kg Axle 1: left 10 mm right 10 mm Hodowu Spgspfx Ag Ueng Axle 2: left 10 mm right 10 mm Axle 3: left 8 mm right 8 mm

Condition: used, Ref: MM6227 Loma Systems bulk metal detector with alarm and belt stop on detect reject system. Model - IQ2. Serial number - AMC42100-29069. Date of manufacture - 2003. Aperture dimensions - 350mm wide x 350mm high (300mm useable height). Belt length - 1800mm long. Hodpox Emmbofx Ag Ueng Belt type - Modular plastic, intralox. Frequency - 82 khz, ideal for fresh products. Previous use - dairy products. This unit has had a new plug, cable, buttons, key switch and sounder fitted.

Condition: refurbished (used), Year of construction: 2021, Brother GTX PRO DTG Printer Year 2021 Very good condition used machine, checked by professional Print: Approximately 100 000 Support table included Printer overhauled, cleaned and tested Included : Ink around 40% (2+) Hsdpfxsk Rkpno Ag Ujng Cleaning liquid full. Included with the used Brother GTX PRO Bulk : 5L Premium Dark Cotton Pre-Treatment, SK Color Dark Cotton; 1L of Premium Light Cotton Pre-Treatment, LIGHT Cotton by SK Color; 1L cleaning fluid for Brother GTX and GTX Pro CXS from SK Color; 100 DTF A3 sheets; 1 Kg of Premium DTF powder. Shipping not included We have various GTX Pro Bulk to sell and prices varies depending on print counts : Less than 40K prints : 13500€ between 40K et 60K prints : 12000€ between 60K et 80K prints : 11000€ between 80K et 100K prints : 10250€ More than 100K prints : 9500€

Condition: used, tank capacity: 1,950 l, GENERAL Equipment: Disc valve Design: Container Remarks: Support frame made of V2A; slight variations in design; two containers are missing the manway cover, the third is missing the clamp ring for the manway cover Total width: 1,320 mm Total height: 2,120 mm Total length: 1,230 mm Support type: Frame Location: Bremen Technical documentation: Drawing Volume: 1,950 liters Cylinder wall thickness: 2.5 mm Product-contact material: V4A 1.4401/04 (AISI316) Condition: Used Last application: Pharmaceutical industry Hjdsxqc Hxopfx Ag Ueng VESSEL Bottom shape: Conical bottom EQUIPMENT Manway / dome: Top head (DN 400) Note: Signs of use Outlet: 250 mm TECHNICAL DATA / DIMENSIONS Bottom wall thickness: 2.5 mm

Condition: like new (used), Year of construction: 2021, operating hours: 15 h, functionality: fully functional, input voltage: 230 V, Equipment: CE marking, Bin tipper with 130° rotation Hjdpjx Hq Avjfx Ag Uong Maximum load 200kg at 350mm from the carriage Loading of 80, 120, 140, 240-litre wheelie bins at floor level Bin retention by the wheels Discharge height 1284mm from ground level Cycle time: lifting 17s; lowering 12 seconds Power supply 230V Double control panel Up and down buttons with operator safety; Continuous contact and operation validation required

Condition: used, Year of construction: 2008, functionality: fully functional, • Manufacturer: Ellimetal N.V. • Country of manufacture: Belgium 2. System Identification • System type: Bulk goods silo system • Configuration: Group of three (3) vertical silos • Application: Storage and handling of powder/silicon dioxide (“powder”) 3. Year of Manufacture • Year of manufacture: 2008 4. Capacity and Construction Data • Maximum storage volume: 190 m³ per silo • Design specific weight: 0.6 kg/dm³ • Empty weight: 4,000 kg per silo • Operating pressure: Atmospheric 5. Construction Design • Vertical cylindrical steel silos • Truncated conical discharge hoppers • External vertical access ladders with safety cages 6. Discharge and Dosing Equipment • Discharge system with conical bottom • Integrated vibrating activators (“vibrators”) • Rotary airlock valve for controlled discharge 7. Conveying Equipment • Integrated screw conveyor/auger system • Conveying components painted green Hodpfxox Iuqyo Ag Usng 8. Control and Operation • Local control panels assigned to: – Silo Silica 1 – Silo Silica 2 – Silo Silica 3 • Control functions for: – Vibrating bin activators – Rotary valves / airlocks

Condition: new, Year of construction: 2026, Make: S&F GmbH Type: MFB-500/5 Belt width: 500 mm Centre distance (A-A): 5,000 mm Conveying capacity: approx. 30 - 40 m³/h (at 0 ° incline) Drive: worm gear motor Motor power: 1.5 kW, 400 V, 50 Hz Belt speed: approx. 1.1 m/s Drive drum: Drum diameter 220 mm Tensioning drum: Drum diameter 220 mm with spindle tensioning station Belt: EP 250/2 2:1 rubber inclined conveyor belt with V-profile (15 mm) Machine weight: approx. 450 kg Machine colour: RAL 6009 Fir green Suitable for the following bulk materials, among others: Wood chips, sawdust and sawdust, biomass, wood pellets, charcoal, waste wood, bark, soil, humus, recycling material, cross-cuts and much more. Hnjdpfxow Ad Rrj Ag Uog Accessories (optional): Feed hopper (filling hopper), inner belt scraper, chassis, tow bar, steel support, electrical installation (16 A plug-in switch) Troughed conveyor belt | troughed belt conveyor | conveyor belt | bulk material conveyor | belt conveyor | inclined conveyor belt

Year of construction: 2018, condition: excellent (used), Complete powder packing system for manufacturing and filling bags up to 10kg. The plant was purchased in 2017/2018 and has only been used very lightly (approx. 60 tonnes in 2024). The system comprises of the following equipment: 1 x Entecon stainless-steel powder sieve fitted to stainless-steel frame. Overall dimensions - 1100mm x 930mm x 2200mm high. 1 x Entecon AMC blower conveyor with control box. 1 x Busch vacuum lifting system. Model - SB 0310 D 0H0 UH XX. 1 x Fluidiser with high and low level probes. Hedjwa Ilhopfx Ag Uong 1 x All-Fill powder auger filler with agitator and outfeed tube. Model - S10. 1 x Gainsborough Engineering Co. GV4 vertical form, fill and seal bagging machine (2018) fitted with Markem Imaje Smart-Date X60 thermal printer. Sealing bars - 430mm (horizontal) and 600mm (vertical). Current film - 840mm wide. Used to produce 400mm wide bags. 1 x Gainsborough Engineering Co. mobile outfeed conveyor. Infeed - 200mm. Outfeed - 1000mm. 1 x OCS Checkweighers GmbH HC check weigher (2017) to weigh up to 30kg. Type - HC. Weigh table dimensions - 800mm long x 60mm wide. 1 x Declined roller conveyor on height adjustable feet, all stainless steel. Roller bed width - 800mm. Overall dimensions - 1210mm long x 880mm wide x 870mm high (+130mm max). *Please note - if you require a metal detector for this line then please enquire with us, we can supply a suitable unit* Please contact for more details and to arrange a viewing.

Condition: used, machine/vehicle number: 131xxxx, Year of construction: 1996, Please contact ATS Norway for more information Please provide reference number upon request: 21619 Hnsdpfx Aexx H Nmeg Ujg Specifications: Model year: 1996 Not EU-approved 3 axles 6 compartments Length: 1400 cm Axle distance: 182 / 182 cm Permitted total weight: 44,000 kg Max payload: 35,800 kg Tires (see pictures) Delivery by agreement Description:1996 Spitzer silo trailer, 3-axle bulk trailer.Not EU-approved since 02.11.2024 due to brake hoses that failed inspection.Delivery by agreement. Technical approved: no EU-approved until: 02.11.2024 Own weight: 8200 Total Weight: 44000 Payload: 35800 Width: 255 Length: 1400 Model: 1996 Spitzer silo-trailer 3 akslet bulkhenger

Condition: like new (used), Year of construction: 2017, 1 used bulk material counting system based on vision systems Manufacturer: DATA Detection Technologies Ltd. Model: DATA count U-162 Year of manufacture: 2017 Size Bulk material parts: 1 to 5 mm The U-162 small parts counter was specifically developed for use as a filler on automatic bagging machines and is ideal for counting repeat batches of the same product type. Embedded with ICI vision mass counting technology, the U-162B parts counter is capable of counting an unprecedented variety of small parts ranging from 1 mm to 25 mm in size, without the need for tooling changes when switching between objects. Complex-shaped items, including open-formed pieces, can be easily counted, making the U-162B small parts counting machine an ideal system for industries such as aerospace, defense, medical, electronics, hardware, and others. Its unique ability to count multiple items in parallel leads to counting speeds of up to 200 objects per second, delivering results comparable to weight-based machines while maintaining higher accuracy compared to conventional counters. The DATA U-162 small object counting machine can be integrated into a variety of automatic poly bagging machines, such as Autobag, Audion, Paxmatic, Sharp, and many others. Main features: - Vision and algorithm based - Counting accuracy: up to 99.8% - Part size range: 1 mm – 25 mm - Speed: Up to 200 objects per second - Industry 4.0 compatible - GMP-compliant design - Easy handling of challenging items - Automatic learning for all object types - One-time setup / no calibration required - Unlimited programs and products - Jam flap to increase counting performance - Ejector mechanism for automatic discharge of excess quantities Hnjdpfxox A Ekko Ag Ueg - Touch panel, PC-based HMI with intuitive graphical user interface - Remote control for remote maintenance - Supports TCP/IP protocol

Condition: used, functionality: fully functional, machine/vehicle number: POLPAK 3000C7, POLPAK packaging machine for bulk products, ice cream, powders. Automatic packaging line for bulk products in pillow-type bags with a weight range of 0.5-2kg. The set includes: - POLPAK 3000C7 packaging machine - Auger dosing unit - Inclined auger feeder - Receiver for finished packages 400x2m - Vide-Jet printer - Prepared for labeler installation - Labeling head The machine was used from 2021 to 2023. Currently, the machine is not in use due to a change in company operations. Hnedpfxsx S Hqgj Ag Uog

Condition: excellent (used), Year of construction: 2020, operating hours: 100 h, functionality: fully functional, Machine for dosing bulk materials very precisely with low air amount. Consists :bunker with 3 screws, SEW drives with fan cooling, rotational valve with knive, air compressor 11kw motor Pedro Gil S.L Total weight of dosing unit- approx 6,6tons. Compressor has silencer chamber with additional cooling fan. Hnjdpjx Dza Rsfx Ag Usg Included 1 pc. 90 degree bend on material and air outlet.

Condition: new, Year of construction: 2026, Make: S&F GmbH Type: MFB-500/8 Belt width: 500 mm Centre distance (A-A): 8,000 mm Conveying capacity: approx. 30 - 40 m³/h (at 0 ° incline) Drive: Drum Motor Motor power: 2.2 kW, 400 V, 50 Hz Belt speed: approx. 1.25 m/s Drive drum: Drum diameter 220 mm Tensioning drum: Drum diameter 220 mm with spindle tensioning station Belt: EP 250/2 2:1 rubber inclined conveyor belt with V-profile (15 mm) Machine weight: approx. 800 kg Machine colour: RAL 6011 reseda green Suitable for the following bulk materials, among others: Potatoes, Wood chips, sawdust and sawdust, biomass, wood pellets, charcoal, waste wood, bark, soil, humus, recycling material, cross-cuts and much more. Hodpfx Ajxk Tg Neg Ujng Accessories (optional): Feed hopper (filling hopper), inner belt scraper, chassis, tow bar, steel support, electrical installation (16 A plug-in switch) Troughed conveyor belt | troughed belt conveyor | conveyor belt | bulk material conveyor | belt conveyor | inclined conveyor belt

Condition: excellent (used), Year of construction: 2018, functionality: fully functional, VECOPLAN brand hopper / bunker / storage and dosing unit model FS400 with 4 screw conveyors. For more information, please feel free to contact me. Hsdequrr Hepfx Ag Ujng

Condition: good (used), Item: D-1035-Double bulk feeder with weight Stainless Steel double bulk feeder with weight. Dimension: Vat L 1800 X W 850 X H 1300 mm Bigger lift: 460 mm, Small lift 100 mm, flight 80 mm L 2700 + weight 500 mm , Total L 3200 mm Hedsd Nk Ucspfx Ag Ueng

Condition: used, tank capacity: 1,900 l, GENERAL Design: Container Remarks: Frame made of V2A/V4A stainless steel; manhole diameter approx. 455 mm (manhole cover and clamping ring available for only 1 container); at the cone end 1 opening with a diameter of approx. 600 mm (closures not included); 1 container with lateral connections (see photos) Total width: 1,200 mm Total height: 2,180 mm Total length: 1,200 mm Support type: Frame Location: Bremen Nameplate: Volume: 1,900 liters Product-contact material: V4A 1.4571 (AISI316) Hodexqb U Uspfx Ag Uong Condition: Used Last application: Pharmaceutical industry TANK Bottom: Conical bottom EQUIPMENT Manhole / Dome: On top head

Condition: excellent (used), Extremely rare machine, possibly the only one for sale in the world today. Gas flush whole bins or dolavs of product. The CV-Tek® CVP Systems A-200 Overhead model line brings the advantages of Modified Atmosphere Packaging to large and bulk items. Full pallets and dolav bins can now be processed efficiently. Being suspended from either the ceiling or wall allows excellent logistics for moving bins and pallets during processing. Wrinkle free seals are achieved with seal bars of 100 inches (2540mm) and automatic bag stretchers. Floating head prevents bag pullout. Hnodji E Tt Hopfx Ag Usg

Condition: new, Year of construction: 2026, Semi-automatic dosing-packing machine for nuts, seeds, sweets, confectionery, fertilizers, grains, coffee and other dry bulk products into pre-made packages (Doy-pack, block-bottom, gusset and others) Specifications: • The dosing range - from 50gr. up to 2000gr. • Continuous thermo-sealing device with adjustable speed and temperature • Capacity up 10pack./min. (depending on product and operator pace) • Control - color touch screen, multilingual menu Hnodpfxsic Rmao Ag Ujg • Supply voltage - 220V; 50Hz, 1kW • CE – certified, made in Lithuania (EU)

Condition: new, maximum load weight: 29,560 kg, overall weight: 36,000 kg, axle configuration: 3 axles, loading space length: 9,890 mm, loading space width: 2,450 mm, loading space height: 2,100 mm, loading space volume: 51 m³, total width: 2,550 mm, total height: 3,710 mm, Year of construction: 2025, Equipment: ABS, Wielton Bulk Master with gooseneck Aluminum square tipper body with combination tailgate, loading volume 51m³ Doors symmetrically split, two grain chutes Floor plate 7 mm ENDUR aluminum HB 114 Hjdpfx Aexv Nwnsg Ujng Unladen weight 6,480 kg Fifth wheel height 1,200 mm New vehicle – available immediately - SAF disc brake axles Ø430 - First axle as lift axle - Automatic tipping lowering function - SAF landing gears - Foldable steel underrun protection - Aluminum air tanks - Tyres: 6x 385/65 R22.5 Goodyear Kmax - Steel rims - Brake system KNORR 2S/2M - Inclination warning sensor - ASPÖCK lighting system with EcoLED II LED taillights - 2x LED reversing lights - 2x LED working lights mounted on the sides - Low-pressure cylinder HYVA Alpha 190 bar - Roll tarp 890 g/m² with quick-release fastener, center tubes integrated - Working platform mounted on chassis, access on driver’s side - Tension chain between side walls in the body - Water tank with soap dispenser - 145-liter PVC toolbox - Aluminum ladder (2,840 mm) - Extendable steel access ladder mounted at the rear - Dust bag - Frame painted RAL 7021 black grey, body painted RAL 9006 white aluminum - Roll tarp light grey Interim sale and errors for this offer are expressly reserved. Some images show optional equipment. The terms of the order confirmation or purchase contract are solely decisive. Exact equipment details and prices are available from our sales staff. Please contact us.

Condition: refurbished (used), functionality: fully functional, Trough Conveyor Belt | Trough Belt Conveyor | Conveyor Belt Factory-refurbished and inspected (used) with new rubber steep-incline conveyor belt and new carrying rollers Lightweight frame construction made of steel Belt width: 500 mm Axle distance (A-A): 10,000 mm Conveying capacity: approx. 30–40 m³/h (at 0° incline) Drive: Drum motor, used Motor power: 1.5 kW, 400 V, 50 Hz Belt speed: approx. 1.25 m/s Drive drum: Drum diameter 220 mm Tension drum: Drum diameter 160 mm with spindle tensioning station Belt: Rubber steep-incline conveyor belt EP 250/2 2:1 with V-profile (15 mm) Machine weight: approx. 800 kg Machine color: freshly repainted Hnjdpjxz Tg Dofx Ag Ueg Incl. infeed hopper (charging hopper) Suitable for, amongst others, the following bulk materials: Wood chips, sawdust and wood shavings, biomass, wood pellets, charcoal, waste wood, bark, earth, compost, recycling material, trimmings, and much more. Accessories (optional): Internal belt scraper, chassis, tow bar, steel support, electrical installation (plug switch 16 A) Trough Conveyor Belt | Trough Belt Conveyor | Conveyor Belt | Bulk Material Conveyor | Belt Conveyor | Inclined Belt Conveyor

Condition: new, Year of construction: 2026, Table top scaling device SVARAS-2 is dedicated for weighing bulk dry products by weight into prepared/prie-made bags. The device dispenses coffee, seeds, spices, groats, sugar, nuts, biscuits and other products of a similar fraction. SVARAS-2 is best suited for small batches, small-scale production or starting a business with a small investment. Doy-pack filling, premade pouch filling. • Capacity – 15doz./min.* • Dosing range – 10gr. – 1kg. • Accuracy – 1%* • Filling hopper capacity – 25ltr • Weighing pocket capacity – 1400ml. • Control – digital Hnodpfx Ageic Rkxe Ujg • Power – 0.2kW • Dimensions – 540x630x670mm • Housing and parts in contact with the product - stainless steel AISI304 • Easily removable weighing pocket and bag chute • Device weight – 33kg • El. supply – 220V, 50Hz, 1ph.

Condition: used, maximum load weight: 29,520 kg, overall weight: 36,000 kg, axle configuration: 3 axles, first registration: 06/2025, next inspection (TÜV): 06/2026, loading space length: 9,890 mm, loading space width: 2,450 mm, loading space height: 2,100 mm, loading space volume: 51 m³, total width: 2,550 mm, total height: 3,710 mm, Year of construction: 2025, Equipment: ABS, Wielton Bulk Master with gooseneck Aluminium box body with combination tailgate, loading capacity 51 m³ Symmetrically split doors, two grain discharge chutes Floor plate 7 mm ENDUR aluminium, HB 114 Unladen weight: 6,480 kg Fifth wheel height: 1,200 mm Demonstration vehicle – immediately available First registration: 25/06/2025 - BPW disc brake axles Ø430 - First axle as lift axle - Automatic tipping lowering - JOST gearbox landing legs - Folding steel underrun protection - Aluminium air tanks - Tires: 6x 385/65 R22.5 Goodyear Kmax - Steel rims - KNORR 2S/2M braking system - Tilt warning sensor - ASPÖCK lighting system with EcoLED II LED taillights - 2x LED reversing lights - 2x lateral LED work lights - HYVA Alpha low-pressure cylinder, 190 bar - Rolling tarp 890 g/m² with quick-release, integrated center supports - Work platform mounted on chassis, driver's side access - Retaining chain between side walls in the body - Water container with soap dispenser - PVC toolbox, 145 litres - Aluminium docking ladder, 2,840 mm - Rear steel access ladder, extendable - Frame painted RAL 7021 black-grey, body painted RAL 9006 white aluminium - Rolling tarp light grey Hnedpsxv Nwhsfx Ag Ueg Interim sale and errors reserved for this offer. Some images show optional equipment. Only the agreements in the order confirmation or the purchase contract are binding. For detailed equipment specifications and prices, please contact our sales staff. Do not hesitate to get in touch.