Used Blow Moulding Machine for sale (65,139)

Condition: used, Year of construction: 2004, Manufacturer: CFS Model: MLF400 Year: 2004 Condition: Used Serial number: 2279 Stock number: 3447J Belt width: 400 mm Capacity: max 50 cycles/min Hopper: 270 liters Belt speed: 1.5 - 15 m/min Power: 3 x 400V, 50Hz, 7.8kW Dimensions: 3650 x 1000 x 2600 mm Weight: 1186 kg With stick inserter SA4180-193 and a 1500 mm discharge conveyor. Fpedpfx Asz I Svueikop Includes an additional 900 mm discharge conveyor and an accessories cart. With a BVP bridge breaker in the hopper.

Year of construction: 2004, condition: used, A BATTENFELD large-format horizontal injection molding machine in need of repair is offered. Operating pressure: 210bar, clamping force: 4500kN, screw diameter: 85mm, injection volume: 2128cm³, injection pressure: 1624bar, tie-bar spacing X/Y: 900mm/800mm, opening stroke: 950mm, max. mold height: 970mm, oil capacity: 900l, connected load: 55kW, operating hours: approx. 82510h, weight: approx. 20.4t. The servo motor for the screw drive is defective. In addition, some smaller parts are missing. An on-site inspection is possible. Fedpfx Ajzvy E Ajikspp

Condition: used, Year of construction: 2013, operating hours: 55,929 h, clamping force: 160 kN, displacement volume: 23 cm³, injection pressure: 2,500 bar, overall weight: 6,000 kg, screw conveyor diameter: 18 mm, terms of delivery: FCA Pegnitz delivery time: on request Fpjdszp R I Iopfx Aikjp terms of payment: 100% prior to delivery

Condition: used, Year of construction: 2011, operating hours: 40,885 h, overall weight: 6,500 kg, displacement volume: 49 cm³, clamping force: 110 kN, injection pressure: 2,236 bar, screw conveyor diameter: 18 mm, terms of delivery: EXW (ex Works) Fpjdpew N Egaofx Aikjp delivery time: on request terms of payment: 100% prior to delivery

Condition: used, Year of construction: 2007, Used Blow Molding Machine SIPA SFR12 18000 bph General Features of the SIPA SFR12 Blow Molding Machine The Used Blow Molding Machine SIPA SFR12 18000 bph performs PET container stretch blow molding and SIPA manufactured it in 2007. As a result of its SFR12 configuration, which includes 12 cavities, the system reaches a nominal speed of 18,000 bottles per hour. Consequently, it delivers high production efficiency across multiple formats. Specifically, this machine processes volumes from 0.25 to 2 liters. Therefore, it fits seamlessly into high-speed bottling lines, particularly in the mineral water and soft drink industries. Moreover, thanks to its compact layout, it optimizes floor space usage. Preform Compatibility and Technical Specifications This machine processes preforms with 3-start Alaska neck finishes and supports weights ranging from 12 to 34 grams. In particular, operators can quickly change formats thanks to the integrated quick-change system, which significantly reduces downtime. In addition, the automated system feeds, tips, and orients the preforms accurately. As a result, the machine ensures a continuous and correctly aligned flow into the heating and blowing stations. Furthermore, this setup minimizes manual intervention and improves process reliability. Notably, the Used Blow Molding Machine SIPA SFR12 18000 bph maintains stable, uninterrupted production across varying operational conditions. Integrated Systems and Automation Fedjxqmp Ropfx Aikepp The machine uses a Siemens PLC for core process control; thus, it guarantees reliable and intuitive management in industrial environments. Furthermore, the system includes certified safety protections, which enhance operator safety and regulatory compliance. Additionally, the air recovery system reduces energy waste and lowers operational costs. Equally important, the rotary blowing system distributes pressure and heat evenly across all cavities. Hence, the machine ensures uniform container quality even during high-speed operation. In comparison to older models, this version offers improved thermal control and air distribution efficiency. Operational Status and Technical Documentation Currently, the Used Blow Molding Machine SIPA SFR12 18000 bph remains in storage, although it is ready for recommissioning after standard inspection or overhaul. Fortunately, the machine includes original technical manuals, available spare parts, and revision records, which together facilitate seamless installation and integration. Moreover, the documentation enables faster troubleshooting and efficient maintenance scheduling. Technical Summary for Line Integration Overall, the Used Blow Molding Machine SIPA SFR12 18000 bph delivers a robust and high-performance solution for production facilities that require consistent, flexible, and high-throughput blow molding. Because of its solid engineering and standard-format compatibility, it serves as a strategic asset for companies looking to upgrade or expand bottling capacity. Furthermore, the availability of auxiliary components and spare parts, along with comprehensive documentation, allows for rapid and reliable integration. Ultimately, this machine enhances line performance while supporting operational continuity and cost-efficiency.

Condition: excellent (used), Year of construction: 1993, Battenfeld BK-T 2500/1250 Closing 250 TO Fsdpfxjr Nf Rts Aikjpp Year 1993 Scrow 60 mm distance between tie bars 63x56

Year of construction: 2025, condition: new, Dimensions (L/W/H) 800x860x850 mm Weight 140 kg Total power requirement 1,5 kw Fpodpfx Aisvz Hy Uskop

Year of construction: 2025, condition: new, Dimensions (L/W/H) 1250x880x850 mm Weight 180 kg Fpedpfsvz E A Uex Aikep Total power requirement 1,5 kw

Condition: ready for operation (used), Year of construction: 1993, functionality: fully functional, product height (max.): 380 mm, workpiece diameter (max.): 130 mm, production capacity: 7,200 unit/h, TECHNICAL DETAILS Number of cavities: 6 Capacity with standard bottles: up to 7,200 bph Product formats Bottle volume: 0.25 – 3.0 L Max. bottle height: 380 mm Max. bottle diameter: 130 mm Preform dimensions Max. preform length: 210 mm Neck inner diameter: 34 mm MACHINE DETAILS Dimensions & Weight Blow module dimensions: 2,000 x 2,200 x 2,200 mm Blow module weight: 8,000 kg Oven dimensions: 3,000 x 1,100 x 2,100 mm Oven weight: 2,000 kg Control cabinet dimensions: 1,500 x 1,000 x 2,100 mm Control cabinet weight: 1,000 kg Transformer 415V / 380V dimensions: 1,000 x 500 x 2,000 mm Transformer weight: 500 kg Preform hopper and conveyor dimensions: 3,000 x 1,500 x 3,500 mm Preform hopper and conveyor weight: 600 kg Preform feeder dimensions: 2,000 x 2,500 mm Preform feeder weight: 250 kg Infeed guide rail length: 2,000 mm Power supply Total power: 142 kW Mains connection: 380/420 V +/- 10%, 50 Hz +/- 1% Cooling water Cooling capacity: 16,000 kcal/h Water temperature: 10 – 12°C Flow rate: up to 6.0 m³/h Water pressure: 5 – 6 bar Compressed air Service air pressure: 7 bar Service air flow: 50 – 100 Nm³/h Fsdpjx A Uu Ejfx Aikspp Blowing air pressure: up to 35 bar Blowing air flow for 0.25 – 3.0 L: 155 – 770 Nm³/h EQUIPMENT Transformer 415V / 380V Preform hopper and conveyor Preform feeder Infeed guides Adaptation to other voltages possible

Condition: used, Year of construction: 2004, functionality: fully functional, machine/vehicle number: 878 40013, clamping force: 2,500 kN, Fully operational machine. Numerous wear parts have been replaced recently. Fpodpfxextmp Ne Aikjp

Condition: good (used), Year of construction: 1976, wire diameter range: a) single wire: 2,2 - 3,8 mm b) double wire: 2,2 - 3,4 mm nail length: 10 - 80 mm Fjdjd Im Nuopfx Aikspp output: 300/600 nails/min.

Condition: used, Year of construction: 2001, operating hours: 70,000 h, clamping force: 50 kN, displacement volume: 739 cm³, injection pressure: 2,470 bar, overall weight: 2,500 kg, screw conveyor diameter: 28 mm, terms of delivery: FCA Pegnitz Fodpfxezt Alys Aikjpp delivery time: on request terms of payment: 100% prior to delivery

Condition: used, Year of construction: 2005, operating hours: 81,700 h, clamping force: 45 kN, displacement volume: 69 cm³, injection pressure: 2,400 bar, overall weight: 3,300 kg, screw conveyor diameter: 25 mm, terms of delivery: EXW (ex Works) delivery time: on request terms of payment: % prior to delivery Manufacturer: Engel Type: VICTORY 200/45 Tech + er/usp Condition: aus laufender Produktion Operating hours: ca. 81.700 CLAMPING UNIT: - Clamping force: 45 t Öffnungsweg: 355 mm Mould installation height min.: 175 mm Mould installation height max.: - Tie bar distance (h x v): holmlos Plate dimension (h x v): 550 x 430 mm Centering (fix- movingplate): / mm INJECTION UNIT: IU200 Screw diameter: 25 mm Injection weight in polystyrol: 63 g Stroke volume: 69 cm³ Einspritzdruck: 2.400 bar CONTROL: CC Fpedpfx Aiorbqtnjkop Screen language: DE Operating manuel: DE EQUIPMENT: - Core pulls: 1 Air valves: - Hot runner control devices: - Robot interface: Angußpicker er/usp Other equipment: Nadelverschl. Hydr., Schnittstelle Dosier- und Temperiergerät GENERAL DATA: - Installed heating capacity: 6,8 kW Pump drive power: 11 kW Total installed power: Motor + Heizung Total weight: 3.300 kg Total size L x B x H: 3,3 x 1,2 x 2,2 m

Year of construction: 2007, condition: ready for operation (used), Clamping force: 1800kN, screw stroke: 200mm, speed: 300rpm, L/D: 20, nozzle stroke: 400mm, nozzle contact force: 50kN, hopper volume: 80l, tie-bar spacing: 520mm/520mm, platen dimensions X/Y: 760mm/760mm, mold installation height range: 250mm-600mm. Machine dimensions X/Y/Z: 6200mm/1700mm/2750mm, weight: approx. 12000kg, operating hours (Nov. 2025): 27271h. Including handling and protective enclosure. Documentation available. An on-site inspection is possible. Fodpfsy N Uwcex Aikspp

Condition: used, machine/vehicle number: 008116, Max. machinable height: 120 mm Max. forward feed speed: 25 m/min Operator shafts number: 6 Fpodpfxjw Iddze Aiksp

Condition: used, Year of construction: 1998, Overview This SIDEL SBO 10/14 Series 1 is a rotary PET stretch blow moulding machine with 10 blowing stations, producing up to 12,000 bottles per hour. It has been used for the production of 1.5 L and 2.0 L PET water bottles with PCO 1810 neck finish. The machine is still installed and in production, can be visited in operation, and is available for immediate sale. Technical data - Manufacturer: SIDEL - Model: SBO 10/14 Series 1 - Year of manufacture: 1998 - Machine type: rotary stretch blow moulding machine for PET bottles - Blowing stations: 10 - Capacity: up to 12,000 bph - Formats: 1.5 L and 2.0 L PET bottles - Neck finish: PCO 1810 - Installed power: 310 kW Fpsdpfx Aozrhr Aoikep - Electrical supply: 400 V / 470 A Condition Used - in production, still installed and under power. The machine remains a reliable solution for water, beverage and other PET packaging applications. Availability Immediately available. Location: Slovenia. Dismantling, handling, packing and truck loading can be quoted on request (EXW).

Year of construction: 2005, condition: used, Clamping force: 1500kN, rated current: 133A, connected load: 74kW, an on-site inspection is possible. Fedpfx Aiezybvqskspp

Year of construction: 2005, condition: used, Clamping force: 1600kN, width: 1600mm, height: 2200mm, weight: 6.8t, an on-site inspection is possible. Fsdjzybvdjpfx Aikjpp

Year of construction: 2004, condition: used, Clamping force: 800kN, tie-bar spacing: 400mm, injection unit: 430, max. flow rate: 76l/min, max. hydraulic pressure: 210bar, control: CDIAS, weight: 3.6t, an on-site inspection is possible. Fsdpfx Ajzybu Hoikjpp

Year of construction: 1999, condition: used, Clamping force: 80t, 3-phase mains supply: 400V, 50Hz, total rated current: 130A, upstream fuse: 160A, max. motor current: 30A, an on-site inspection is possible. The machine is located in Hungary. Fodoz A Apbjpfx Aikopp

Condition: used, Year of construction: 2007, clamping force: 50 kN, displacement volume: 27 cm³, injection pressure: 2,760 bar, overall weight: 2,300 kg, screw conveyor diameter: 20 mm, terms of delivery: FCA Pegnitz Fpodpfozmi A Ssx Aikep delivery time: on request terms of payment: 100% prior to delivery

Year of construction: 2001, condition: used, Clamping force: 1250kN, tie-bar spacing: 475x450mm, injection unit: 440, max. flow rate: 100l/min, max. hydraulic pressure: 190bar, weight: 6.6t, an on-site inspection is possible. Fedpfx Aezybu Toikspp

Year of construction: 2000, condition: ready for operation (used), Clamping force: 3000kN, stroke volume: 1047cm³, shot weight: 953g, injection pressure: 1778bar, screw diameter: 70mm, tie-bar spacing: 630mm, opening stroke: 1150mm, ejector stroke: 200mm, installation height: 330mm, platen width: 1050mm, platen height: 995mm. Machine dimensions X/Y/Z: approx. 6250mm/2050mm/2400mm, weight: approx. 12500kg. Documentation available. An on-site inspection is possible. Fodszcyqtopfx Aikepp

Year of construction: 2025, condition: new, Dimensions (L/W/H) 1250x880x850 mm Weight 180 kg Total power requirement 1,5 kw Fpsdovz Ey Tjpfx Aikjp

Year of construction: 2025, condition: new, Dimensions (L/W/H) 1320x660x850 mm Weight 170 kg Total power requirement 1,5 kw Fsdovz Ekxopfx Aikepp