Used Assembly Accessories for sale (23,608)

Condition: good (used), Year of construction: 1980, 4-jaw chuck Length: 1500 mm Width: 500 mm Height: 1500 mm Rsdpfx Afswry Ixsnot Weight: 900 kg

Condition: used, For sale or free of charge are three climate smoke chambers manufactured by AUTOTHERM, including accessories. These units are ideally suited for meat and food processing, particularly for cold smoking. Technical Data / Features: Chamber 1: approx. 8 racks (W approx. 2.10 m x D 5 m) Chamber 2: approx. 10 racks (W approx. 2.10 m x D 6 m) Chamber 3: approx. 12 racks (W approx. 2.10 m x D 7 m) Rjdpfx Afsyw Hl Isnjt Cold smoke system with 2 smoke generators (Goliat, sawdust) Temperature range up to approx. +22 °C (hot water heat exchanger) Humidity control available Cooling coil (R232, R404) Some refrigerant compressors present Construction: Air ducts, wall cladding, and control cabinet made of V2A (stainless steel) Condition: Electronics/control currently non-functional Control cabinet available Condition as shown in the pictures Additional equipment / accessories: Smoking sticks (wood) 2 kettles Cooking chamber (for 2 racks) Cleaning machine (defective) Freezer Important notes: Available free of charge Dismantling and transport to be organized by the buyer Inspection possible by appointment

Condition: new, Work and Assembly Table New Machine Year of Manufacture: 2023 The ergonomic work and assembly table ErgoPlan EP1 is equipped with a bench top made from selected, solid red beechwood. The surface is waxed and polished. The stepless height adjustment under load is smooth and precise—even with asymmetrical loading of the tabletop. TECHNICAL DATA Bench top without vises: 1,700 x 640 x 120 mm 2 vise keys: - Front vise made of solid cast iron/steel construction - Rear vise with robust aluminum box guide (with adjustable guide prism and plastic slide guide) Top thickness: 120 / 60 mm Usable lift: 300 mm ErgoPlan height: 780 mm Weight of bench top: approx. 95 kg Total weight: approx. 240 kg An attached cover on the rear side serves as protection against shearing and as a pinching guard. The lifting unit is concealed in the left lifting column and thus protected from dirt and damage. Rjdskwhwzepfx Afnjt Load capacity up to 400 kg Maximum overall height: 1,080 mm 2 ErgoPlan bench hooks, consisting of aluminum round bench hooks with ball locking mechanism, 30 mm, length 200 mm 1 vertical clamp for securing the workpiece from above, with 1 indexing bolt, adjustable up to 200 mm workpiece thickness, 360° swivelling Availability: short-term Location: Flörsheim

Condition: new, Work and assembly table Worktop made of solid sheet metal equipped with high-quality workbench (can be removed using screws) Easy back-friendly work thanks to height adjustment using a foot pedal Perfectly aligned using the 4 adjustable feet, very easily using an Allen key Continuous height adjustment and 3 fixed working heights Optimal handling thanks to 4 swivel castors with parking brake Regional quality From conviction - 5 year guarantee Load capacity 300 kg Height 400 - 1010 mm Worktop length 1485 mm Worktop 1700 x 790 mm Useful stroke 610 mm Weight 140 kg Front pliers 520 x 70/190 mm (size/span) Side pliers 460x140/145 mm Rjdpfxevymfho Afnst (size/span) Availability: short term Storage location: Flörsheim

Condition: used, This listing is for 1 of 4 Kinbio Tech YK1225-Shanghai Assembly Roller Conveyor Rodpsxzg H Djfx Afnet

Condition: used, This listing is for a Qiagen QIAxcel Advanced DNA Analyzer plus Accessories. The QIAxcel Advanced system replaces traditional, labor-intensive gel analysis of DNA and RNA by fully automating sensitive, high-resolution capillary electrophoresis of up to 96 samples per run. The QIAxcel ScreenGel software ensures convenient analysis and documentation of data. Rodpfx Aoxzgy Dofnot

Condition: used, functionality: unexamined, For sale are 3 milling heads with integrated quill by Scheller. €350 per milling head The heads were previously installed on FE 1-10 Scheller milling machines. A reference photo is included in the images. (PLEASE NOTE: MACHINE IS NO LONGER AVAILABLE. THIS LISTING IS FOR THE HEADS ONLY) Delivery throughout Europe is possible on request and at additional cost. Prices are excluding VAT. Viewings available by appointment. Please contact us—our team will be happy to assist you. Trade-in or exchange possible! Rsdpfx Afouabmbsnst Machinery purchase / sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES AND MORE. Are you looking for a high-quality yet affordable metalworking machine for your production facility? Or want to sell your own? For further information or contact options, please visit our website.

Condition: good (used), functionality: fully functional, For sale is a milling table for a Deckel Fp1 milling machine including dividing head Both can also be purchased separately Cross table dimensions: 60*27 cm Part Apparatus Dimensions: DM 38 cm On request, for an extra charge, can be delivered throughout Europe Prices plus VAT Viewing possible by appointment. Contact us, our team will be happy to help you. Trade-in or exchange possible! Machines purchase / sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES AND MUCH MORE. Redpfxjuhp Ntj Afnot Do you need a high-quality but inexpensive metalworking machine for your production? Or do you want to sell yours? For further information or contact options, please visit our website

Condition: excellent (used), Year of construction: 2007, functionality: fully functional, Rotox sash assembly table, year of manufacture 2007; automatic screw feeding, adjustable screwdriver height, corner bearing drilling unit, fittings shelf Rjdpfsyr Arxox Afnot

Condition: excellent (used), Epson G10-854SR Robot Assembly Station and Dispensing Station The assembly station is divided into the following sub-stations: 3.1 Dispensing Area, 3.2 KK+SW Assembly Area, and 3.3 Front Assembly Area. (KK = Heat Sink, SW = End Wall Bracket) St. 3.1: Dispensing Area: - A workpiece carrier (WT) with mounted chassis and PCBs enters the dispensing area via the transfer belt. - It is stopped at the lifting-positioning unit (HuPo), lifted off the belt, and fixed in place. - The X-Y-Z handling moves the dispensing head to the designated position and starts the dispensing process. - After successful dispensing, the handling moves to the rest position, and the WT is placed back on the belt. - Continued transfer to the KK+SW assembly area (provided there is no WT in the mounting position). St. 3.2: KK+SW Assembly Area: - A WT from the dispensing area arrives in the KK+SW assembly area via the transfer belt. - It is stopped at the lifting-positioning unit (HuPo), lifted off the belt, and fixed in place. The chassis side walls of the partially assembled unit are aligned. - KK tray and SW tray positioning occurs simultaneously. - A stack of 12 KK trays and a stack of 12 SW trays are manually placed on their respective infeed conveyors outside the safety enclosure. - The two safety shutters are opened, and the loaded tray stacks move into the gripper position of the respective stacker. - The safety shutters are closed again. - The respective grippers pick up the corresponding tray. - The tray is separated using the Z-axis and transported upward (above the normal pick-up height). - For centering and stabilization, a centering support is positioned beneath each tray using X-axis handling. - With the stacker's Z-axis, the respective tray is placed on the centering support. - The trays are ready for component pick-up. - With the multi-gripper on the SCARA robot, the KK is picked up from the tray and placed in an intermediate position as an alignment aid (to achieve exact pick-up positions for assembly). - The KK is scanned, picked up again, and if the scanner result is OK, mounted onto the WT. - Any KK that is not OK is placed in a reject box. - The multi-gripper on the SCARA robot then picks up the SW from the tray and places it in the alignment position. - The SW is picked up again and mounted onto the WT. - Assembly continues in the front assembly area. Technical Data: Design: SCARA (4-axis robot) Nominal Load Capacity: 5 kg, Maximum: 10 kg Horizontal Reach: 850 mm Rodpfoibx S Nsx Afnjt Vertical Reach: Axis 3: 420 mm Orientation Range: J4: +/- 360° Repeatability (Horizontal): +/- 0.025 mm Repeatability (Vertical, J3): +/- 0.01 mm Repeatability (Orientation, J4): +/- 0.005° Maximum Working Range: Axis 1: +/- 152°, Axis 2: +/- 152.5°, Axis 3: 420 mm, Axis 4: +/- 360° Maximum Operating Speed: J1, J2: +/- 11,000 mm/s, J3: +/- 2,350 mm/s, J4: +/- 2,400°/s Permissible Inertia: nominal 0.02 kg*m², maximum 0.25 kg*m² User Wiring (electrical): 1x D-Sub 9 pin, 1x D-Sub 15 pin Z-Axis: Outer diameter: 25 mm Press-in Force: 250 N Weight: 48 kg Controller: EPSON RC180 Mounting Type: Ceiling IP Protection Class: IP20 Power and Signal Cables: 3m Financing through our bank is also possible. komplett-konzept.leasingo.de

Year of construction: 2003, condition: good (used), Schatz Advanced Screwdriving Unit  Schatz screw machine Length: 5450 mm Height: 3000 mm Unwinding stand Rodpeihiiisfx Afnot Length 5020 mm 2 x Demag crane 1 x Liftket electric chain hoist  1 x Schatz 907500 Installation without Advantech TPC-1260 TE Touch Panel PC Financing through our bank is also possible. komplett-konzept.leasingo.de More screwdriving machines in other sizes - new and used - can be found here.

Condition: used, Width: 1,550 mm Height: 1,100 mm Length: 1,150 mm Protective cover / lid / flap for a planer machine Weinig type Unimat 23 SP or similar. Rodpfxjwuub Ss Afnst

Condition: used, Clamping length: 310 mm Spindle: 40 & 50 mm Tool diameter range: 80 – 300 mm Rodpfewcn Hqox Afnot Weinig precision setting gauge for adjusting planer heads.

Condition: new, Diameter: 150 mm Manufacturer No.: 920 072 005 Grit: D 126 900819 Grinding wheel for Weinig Rondamat or similar sharpening machines. Redpfx Aevl Hy Ajfnot

Condition: like new (used), Width: approx. 210 mm Passage height: approx. 85 mm Height: approx. 160 mm Redpfst T Hk Tox Afnst Length: approx. 435 mm Hole spacing: 120 mm

Condition: used, - d1 = 35 mm, Rsdpfolkclkjx Afnet - d2 = 27 mm (wrench size), - Total length: 195 mm.

Condition: new, Year of construction: 2025, functionality: fully functional, overall weight: 1,500 kg, We are offering this new RUBIX assembly machine, year of manufacture 2025. I am a professional in the industrial sector, offering my services as an industrial premises developer. During a relocation and the construction of a new platform, my client RUBIX transferred to me some new, packaged hydraulic and pneumatic equipment after discontinuing this activity from their range of industrial equipment supply. Therefore, I am offering for sale a batch of equipment as listed in the attached document: hydraulic pumps, hoses, and fittings. I can provide a sales invoice and offer an attractive price for the lot, which is valued at €43,000 (excluding VAT). I remain available to discuss with you according to your interests. Rsdeyc Eudepfx Afnot If you have any questions or require further information, please do not hesitate to send us a message or call us.

Condition: ready for operation (used), Year of construction: 2020, An automation machine Infinite Technologies and Robotics (CN) for automated assembly of clips on electroplated chrome trim strips is available. Clips per component: 6, component geometries: 4, pressing force: 100N, pressing force tolerance: +/-10N, positioning tolerance: +/-0.3mm. Sliding tables: 2, sliding table dimensions X/Y/Z: 1180mm/770mm/15mm, sensors: 4. Tool holders: 2, holder dimensions X/Y/Z: 740mm/490mm/190mm, max. holder weight: 20kg. Axis systems: 2, travel X/Y/Z: 800mm/400mm/300mm, max. speed: 250mm/s, spindle pitch: 5mm, payload: 330N. Machine dimensions X/Y/Z: approx. 3700mm/2250mm/2300mm, weight: approx. 3000kg, control: Siemens S7. Including vision system Keyence, sensors Sick and pneumatics SMC. Documentation available. An on site inspection is possible. Rjdpfxeyrta Te Afnst

Year of construction: 2024, condition: new, The flattest wooden frame construction table in the world = 3 cm! Delivery without wooden boards. Text line break Rjdpfx Afeb Nrbnenot with the following data: Included components: 1 double rail (zero stop) - 10 perforated rails - 10 rack and pinion clamps - 14 adjustable stop blocks - 14 interchangeable pressure plates outer wall - Battery impact screwdriver - Bit adapter - 50 MMS 10x70/5 dowel - Hammer drill 8x165 dimensions: Clamping length from 0 to 3.550 mm hole grid 140 mm with plate width 1.250 mm = table length 12.350 mm max. clamping force approx. 250 kg stroke length clamp 340 mm height of stop blocks 100/160 mm The frame building aid was developed in order to precise production of timber frame elements. elements. Special attention was paid to the space requirements and the price. Due to the extremely flat it is now possible to change the surface by removing the the space by removing the clamps and stops. used in a different way. This is not only for small, but for all but for all company sizes a special advantage. After creating a flat surface, the tensioning rails are rails are aligned and anchored to the anchored to the floor. The intermediate spaces are covered with a 30 mm thick wooden panel to be mounted on site. filled. The same plate can be used to attach ramps to the edges. can be attached to the edges with the same plate. The level created in this way level can also be driven on with heavy vehicles vehicles, or can be used as a storage area. Thus the place can be activated only if necessary for the timber frame construction. be activated. The steel parts are galvanized. The entire assembly takes place on site. After adjusting the T [...]

Condition: like new (used), Clamping length: 240 mm, Body diameter: 110 mm, Pulley diameter: 70 mm. Total length: 860 mm, Spindle diameter: 40 mm, - 0704D64, HL3/1. Rodpfx Afslkchnenst

Condition: used, bore 50 mm Rsdpfx Afoxvchmonjt

Condition: used, Speed: 2,700 rpm Motor: 0.24 kW Saw unit including cable and switch. Redpfxow Uz Rrj Afnjt

Condition: used, Clamping length: approx. 170 mm Rjdow Uy Najpfx Afnet Spindle diameter: 40 mm

Condition: used, Width: 1,250 mm Grit: 180 Rjdpfew Dn Nuex Afnot

Condition: used, Bore: 25 mm Width: up to 25 mm Diameter: 200 mm Rsdpfx Afjwrp I Isnet Lot (9 pcs) assorted unused, as-new grinding wheels made of aluminium oxide (or similar).