Used Blown Film Accessories for sale (25,251)

Year of construction: 2013, condition: ready for operation (used), Mariani Shrink film wrapper Model: TRM 700-LF-I YOM 2013 Including in/outfeed conveyor system Working width: 700mm Cardboard Trays – Cases with protective shrinked film Portion packs : 3 x 8 – 3 x 9 – 3 x 10 Family packs : 2 x 6 – 3 x 4 Output: Max 25 trays per min, varying according to the format required Hedpfx Ajyilyqebkjnu Dimensions machine (LxWxH): 5000x1400x2100mm

Condition: ready for operation (used), Plastic Film Wash Line with Extruder Available in Ireland Can be seen running if necessary Sink Float Tank Centrifuge Washer Dryer Extruder Hodpezylxijfx Abkenu Granulator Shredder Everything required for the washing and recycling of Plastic Material 1 Tonne per Hour

Condition: excellent (used), Year of construction: 2003, functionality: fully functional, Equipment: documentation/manual, type plate available, GREAT PRICE!!! ONLY 6,500,- Original price over 38,000,- Taylor Hobson Talyrond 265 roundness measuring device. Extremely accurate, it can measure the roundness of lenses, optics, pistons, turbine components, tubes, shafts, but also eccentricity, e.g. of cams on a camshaft, or journals of a crankshaft; it is certainly of interest to motorsport and tuning companies. The first photo is a "representative image" from a Taylor Hobson catalog, showing how it is set up, except for the computer; a newer, more modern HP model with a small form factor is included. Max. diameter 350mm Max. test piece height 500mm (higher measurements up to max. 1000mm can be taken by measuring in two halves....) Self-centering of the workpiece +/- 5mm Max. weight of test piece 40 kg Hjdpezcqy Ejfx Abksnu The system has been used very little and has had only two owners. The first owner, from whom I bought it, was an implant company in Hamburg, where it was used in a "medically clean environment"; it is extremely clean. It was never in a dirty machine hall. The year of manufacture is estimated to be between 2003 and 2005. The Taylor-Hobson measuring software is, of course, included and runs on the supplied HP computer (without a password....). It is also on the USB stick, perhaps to install it on another machine at your location. Accessories are included, the original Taylor-Hobson desk, computer, monitor, seven (7!) measuring probes, each of which is very expensive to purchase. A sample/sample lens (hemisphere) for calibration is also included! The very detailed operating manual is on the USB stick, and it also contains all the circuit diagrams and functional diagrams! The system will be shipped on two Euro pallets via a shipping company. It is already securely fastened to them. The Talyrond 265 and the desk will be well protected with bubble wrap, etc., and wrapped with stretch film for transport on the pallets. The system itself is fixed with "transport safety screws".... Shipping is at the buyer's expense and will be carried out on two Euro pallets.... The measuring system should definitely be set up and put into operation by a Taylor Hobson service technician, who can then also recalibrate the system on site; this is now recommended after a few years. Mistakes can be made during assembly and commissioning. For example, there are several locking screws for transport; if you forget them, the system could be damaged when it starts up. A truly well-maintained, very accurate system that will provide many years of excellent service!!

Year of construction: 1996, condition: excellent (used), film width: 1,300 mm, Used single-layer blown film extruder for sale in excellent condition, featuring a 150 mm die diameter and a production capacity of up to 100 kg/h. Model: Queens EP-65N Processable materials: LLDPE/LDPE/MDPE/HDPE/other blends. Screw diameter: 65 mm Head: • Blown film die head • Die diameter: 150 mm Die gap: 1.2 mm Output: Up to 100 kg/h, depending on material composition Hnsdpfjxrb Hmex Abkju • Maximum speed: 120 m/min • Winding width: 1300 mm - Flying knife roll slitting Accessories included: • Tower • Gravimetric weight control system • Masterbatch dosing unit • Calibration cage The machine can be inspected in operation. Offered with spare parts.

Year of construction: 2012, condition: used, This Macchi 3-layer blown film co-extrusion line is designed for the production of high-quality polyethylene films with outputs of up to 800 kg/h. The line processes LDPE, LLDPE, MLDPE, and HDPE and is suitable for manufacturing collation shrink film, gusseted shrouds, stretch hood film, tubing, and sheeting. Materials to be processed: LLDPE/LDPE/LLD/HDPE Extruders: 65 mm + 80 mm + 65 mm Infrared heaters 3 pcs plate filters Head: 3-layer blown film die head TE5303-IBC-350/500 Die diameter: 350 and 400 mm IBC Die gap: 1.8 mm Output: Up to 800 kg/hour, depending on the material formulation Air ring: Dual-flow air ring, carbon fiber Take-off: Hodpfx Abozkru Eoksnu Take-off unit, 2400 mm wide Oscillating nip rollers Motorized side gusseting Rewinder: Double winder, fully automatic back-to-back rewinder Winder, fully automatic roll change Reel diameter up to 800 mm Winding width 2350 mm Accessories: Tower Web guide, E&L Gravimetric weight control system, Piovan/Doteco Component blender, Shini Dosing units, Doteco Automatic thickness control, Kundig K-Design profile gauge control system Calibrating basket Corona treater, Martignoni Air shafts, 8 pcs

Condition: used, Year of construction: 2017, functionality: fully functional, total length: 3,820 mm, total height: 2,105 mm, total width: 2,010 mm, type of input current: three-phase, product height (max.): 380 mm, product length (max.): 2,000 mm, input voltage: 415 V, compressed air connection: 6 bar, input current: 43 A, working height: 1,105 mm, length of welding knife: 1,370 mm, passage height: 380 mm, overall weight: 1,180 kg, power: 26.7 kW (36.30 HP), film width: 1,350 mm, input frequency: 60 Hz, year of last overhaul: 2026, space requirement width: 2,010 mm, Equipment: documentation/manual, safety light barrier, For sale is a used Saropack / SMIPACK BP1402AS strapping machine with an integrated shrink tunnel, manufactured in 2017. The machine was used in our facility, regularly maintained, and is in fully functional and ready-to-use condition. Suitable for the automatic or semi-automatic packaging and strapping of various products with shrink film. Technical data: - Manufacturer: SMIPACK S.p.A. / Saropack - Model: BP1402AS - Year of manufacture: 2017 - Serial number: 63604 - Connection: 3PH + N + PE - Voltage: 380–415 V - Frequency: 50–60 Hz - Power: 26.7 kW Hnjdpfx Asz I Sz Rebksu - Current consumption: 43 A - Sealing bar: approx. 1,370 mm - Maximum product height: approx. 380 mm - Automatic and semi-automatic operation - Motorized film unwinding - Integrated shrink tunnel - Suitable for shrink film / LDPE film Condition: Used, regularly maintained, and fully functional. Normal signs of wear and tear consistent with age and use. The machine can be inspected and demonstrated in operation by arrangement. Location: Kestenholz, Switzerland Price: EUR 22,900 (negotiable) Transport and loading by arrangement.

Condition: used, Year of construction: 2000, Format: 370 x 520 mm Equipment: Hnodpfx Ajzzzt Sobksu Alcolor Automatic film dampening Autoplate: semi-automatic plate change system All manuals, tools, accessories Technical details: Maximum sheet size: 370 x 520 m Paper thickness range: 0,03 - 0,5 mm - Max. speed Plusversion

Year of construction: 2022, operating hours: 39 h, condition: like new (used), functionality: fully functional, machine/vehicle number: IPRTTJ22Z144, ISOblow Prof Twin Turbo – Mobile unit including complete hose set, lance set, and woven sack for blowing in - 2 turbines generate a very high air flow rate - Also ideal for wood fiber insulation materials - Electronically controlled material slide - Easy filling via large filling flap - High capacity of the hopper Hjdpoz R Ut Rjfx Abkjnu - Material hopper with 4 loosening shafts - Very good loosening, even with tightly compressed bales - Ideal for large construction sites and use in prefabrication - 1 x 400 V 16 A connection is sufficient

Condition: like new (used), functionality: fully functional, Year of construction: 2018, MACCHI COEXTRUSION LINE FOR 7-LAYER EVOH BLOWN FILM Complete line for the production of 7-layer EVOH blown film 4 Macchi extruders with 65 mm screw diameter 3 Macchi extruders with 55 mm screw diameter Innoplast gravimetric dosing units 7-layer die head, 450 mm diameter with IBC, 2.4 mm GAP K-Design cooling ring Double thickness control IR+XRay Maximum width 2400 mm Calibration basket Rotating haul-off Cason corona treater Hodpfx Abey Nk Haskenu Macchi BO-Plus double back-to-back automatic winder Web guide Year 2018

Condition: excellent (used), Year of construction: 2003, Ref:11066 . 2003 Autobond105 THS. B1, single sided, fully automatic thermal laminator. Excellent condition run less than 1.5 million sheets! Equipped with; Heidelberg deep pile suction feeder with back separation 250mm (10) diameter highly polished chrome laminating roller Laminating nip pressure up to 6 metric tonnes Film is mounted on a quick change air shaft Trim slitter and perforating mechanism Pneumatic clutch ensures precise film tension Swiss made temperature control unit Sheeter - Integral bump roller separator with anti-curl bar Pallet delivery table. Hnodoydnxnepfx Abkeu Accessories: Ioniser Pro static eliminator. Specification: Sheet size Max: 105 cm (40”) x 76 cm (30”) Min: A4 Paper weight 90 gsm (80lb) - 650 gsm (24 PT) Film Range - 8 micron virgin & 24 micron (1 mil) to 75 micron (3 mil) thermal Top speed 45m (150') per minute with rising pile feeder.

Condition: new, Year of construction: 2025, Our SAPI "Mammut" pressure blaster with a 100-liter tank capacity is suitable for all common blasting media. The blasting pressure can be continuously adjusted from 0.1 to 12 bar using the built-in pressure regulator. A water separator is also permanently installed on the blaster, which separates moisture from the compressed air and prevents the blasting media from clumping due to excessive moisture. Our safety shut-off system ensures safe operation of the sandblaster. This starts and stops the blasting process by operating the hand lever mounted on the blasting hose. The pressure blaster is delivered fully operational, assembled in a space-saving mesh box. All that's required is to connect the compressed air supply and fill it with blasting media. It can be easily transported by forklift or pallet truck. A lockable aluminum box is installed for storage of protective clothing, spare parts, etc. The scope of delivery includes: SAPI "Mammut 100 L" pressure blaster 1" pressure regulator, permanently mounted 1" water separator, permanently mounted SAPI safety shut-off device Abrasive sieve Cover 10 m blast hose, fully assembled, ø 25x7 mm Silicon carbide Venturi long nozzle, diameter optionally 6 mm, 8 mm, or 10 mm Hjdpfx Abowc Ri Iekjnu RED 2 sandblasting helmet Nylon/cotton sandblasting overalls 1 pair of leather blasting gloves 10 m breathing air hose, fully assembled SAF breathing air filter/activated carbon filter Wearing parts set consisting of: 100 tear-off films for RED 2 10 inner discs for RED 2 1 blast hose coupling, 25x7 mm nylon 2 rubber seals for blast hose coupling 1 nozzle holder, 25x7 mm Grid box with blast hose holder Aluminum box Lockable Technical specifications of the pressure blaster: Precisely adjustable from 0.1 - 12 bar TÜV-certified with certificate Fixed 1" internal and external piping Rubber-coated metal cone with rubber seal Large hand hole Rubber-wheeled chassis Abrasive dosing valve (suitable for all common blasting media) Capacity: 100 l Total height: 1,130 mm Bowl diameter: 490 mm Total diameter: 900 mm Weight: approx. 75 kg Dimensions of the mesh box: Length: 1,460 mm Width: 840 mm Height: 1,400 mm Total weight including all accessories: 260 kg

Condition: used, Zwick/Roell Zwick/Roell ProLine Universal Testing Machine Z010 TN – 10 kN, Type: BT1-FB010TN.D30 For sale is a professional material testing machine from Zwick/Roell, suitable for tensile and compression tests up to 10 kN. The machine comes from an industrial setting and has been professionally operated. General Data: Manufacturer: Zwick GmbH & Co. KG, Ulm Rated force: 10 kN Type of test: Tensile and compression test Technical Performance Data: Crosshead speed: 0.001 – 1,000 mm/min Speed accuracy: 0.01% of Vnenn (nominal speed) Displacement resolution: 0.038 µm Positioning repeatability: < 2.0 µm Maximum test frequency: 0.5 Hz Data acquisition rate: 500 Hz Data transfer to PC: 10–100 Hz Force measurement according to ISO 7500-1 Dimensions & Weight: Height with leveling elements: approx. 1,331 mm Width with electronics: approx. 930 mm Depth with electronics: approx. 437 mm Working space width: 440 mm Working space height (bottom): 1,050 mm Weight with typical components: approx. 160 kg Electrical Data: Adjustable mains voltage: 100–250 V Hsdpfxezizrke Abkonu Mains frequency: 50 / 60 Hz Power consumption: 800 VA Current consumption at 230 V: approx. 3.4 A Fuse rating: ≤ 16 A Connection: 1L / PE / N Documented test and calibration records: 18.09.2017 Machine BT1-FB010TN.D30 testXpert II Version 3.2 tC-PC System Temperature during testing: 23.3 °C Displacement measurement system: Incremental encoder (rotary) Force sensor installed 29.01.2014 Force sensor: Xforce HP Module: DCSC Calibration at Zwick Ulm 28.08.2013 Force sensor: Xforce P Module: DCSC Rotation before test series: 120° testXpert control system Documented service and calibration records are available. Software & Control: Software: testXpert® II Documented version: V3.2 Installation documentation from version 2.2 Documentation status: March 2010 PC control: tC-PC Interfaces: RS232 / Ethernet Note: testXpert II is a professional industrial testing software. Installed Modules & Components DCSC measuring module Force sensor Xforce P / Xforce HP Incremental encoder (rotary displacement measurement system) ISO 7500-1 compliant force measurement Installed under the traverse Important Note: “The table shown in the photos is not part of the sale.” Condition: used Scope of delivery: Material testing machine BT1-FB010TN.D30 PC with monitor Force sensor DCSC module Specimens / Grips Adapters and holders Tools Documentation folder with documents Scope of delivery as shown in the pictures. (Changes and errors in the technical data are subject to change!) We will be happy to answer any further questions you may have by telephone.

Condition: used, Universal Shaker accessories / adapter plates / expander plates Universal accessory kit for electrodynamic shaker test systems Professional accessory kit with expander plate, adapter plates, and clamping accessories for vibration test benches, vibration testing, and material testing. For sale is a comprehensive used accessory kit for an electrodynamic shaker or vibration test bench. The accessory kit is ideal for setting up test specimens, special fixtures, adapter constructions, and individual test setups. The kit consists of several solid aluminum adapter plates, a reinforced expander plate, adapter elements, and other accessories. Technical data: Manufacturer: unknown Type: accessory kit for electrodynamic shakers / vibration test benches Material: predominantly aluminum, partially steel Components: 1 reinforced expander plate, approx. 770 × 770 mm – approx. 90 kg 2 adapter plates, approx. 770 × 770 mm – approx. 45 kg and approx. 40 kg 1 adapter plate, approx. 770 × 770 mm – approx. 35 kg 1 adapter plate with circular cutouts – approx. 25 kg 1 round adapter plate – approx. 20 kg Hsdpfezp D Tkjx Abkjnu 1 clamping rail / linear adapter – approx. 25 kg 1 precision adapter block – approx. 3.06 kg 1 steel adapter plate – approx. 2.18 kg Other adapter and fastening parts as shown in the pictures Features: Solid aluminum adapter plates Reinforced expander plate with central mounting Precision-engineered hole and thread patterns High stiffness for dynamic loads Adapter plates of various sizes and weights Round adapter plate Adapter plate with circular cutouts Clamping rail / linear adapter Precision adapter block Other adapter and fastening parts as shown in the pictures Application areas: Electrodynamic shakers Vibration test benches Vibration testing Material testing Environmental simulation Research and development Automotive industry Aerospace Test specimen mounting and special constructions Scope of delivery: Complete accessory kit as shown in the pictures 1 expander plate Several adapter plates Round adapter plate Adapter plate with circular cutouts Clamping rail / linear adapter Precision adapter block Other adapter and fastening parts as shown in the pictures Weight: 400 kg Condition: Used Optical condition as shown in the pictures. Normal age-related signs of wear, scratches, and pressure marks are present. Some minor edge damage and signs of wear from test operation. Only the accessories shown in the pictures are for sale. The table or other items not explicitly mentioned in the pictures are not included in the sale. Shipping on a pallet or collection is possible. Due to the high total weight, shipping is only possible via freight forwarder. Subject to changes, errors, and prior sale. We will be happy to answer any further questions by telephone.

Condition: used, FARO Gage Plus F4 Measuring Arm / 3D Coordinate Measuring Arm FARO Gage Plus F4 Mobile measuring arm with CAM2 SmartInspect Pro and extensive accessories. For sale is a used FARO Gage Plus F4 measuring arm with CAM2 SmartInspect Pro software and extensive accessories. The mobile measuring arm is suitable for industrial measuring and testing tasks as well as for the acquisition and control of component geometries. Technical data: Manufacturer: FARO Model: Gage Plus F4 Device type: Mobile 3D coordinate measuring arm / measuring arm Revision: 23.5 Hnedpfszxy Sbox Abkou Accuracy specification: 5 + 8L/1000 µm Country of manufacture: Switzerland Certification date: 12.06.2019 Software: FARO CAM2 SmartInspect Pro Software key as shown in the pictures USB stick as shown in the pictures Equipment: FARO Gage Plus F4 measuring arm CAM2 SmartInspect Pro Software key USB stick / USB cable as shown in the pictures Measuring and probing accessories as shown in the pictures Tool and accessory case FARO protective cover Documentation / documents as shown in the pictures Additional accessories as shown in the pictures Areas of application: Industrial metrology Quality assurance Component testing Geometry testing Production control Workshop and measuring room Scope of delivery: 1 × FARO Gage Plus F4 measuring arm CAM2 SmartInspect Pro with key USB stick / USB cable as shown in the pictures Tool and accessory case Measuring and probing accessories as shown in the pictures FARO protective cover Documentation / documents as shown in the pictures Accessories as shown in the pictures Overall dimensions of measuring arm: not clearly defined as L × W × H Arm segment dimensions: 398 / 213 mm Measuring range: 1.5 m Weight of measuring arm: approx. 8.1 kg Transport case: Dimensions: approx. 1,145 × 409 × 330 mm Shipping weight: approx. 26 kg Condition: Used Optical condition as shown in the pictures Nameplate present The table shown in the photos or other items not explicitly mentioned are not part of the sale. Shipping or freight shipping is possible. Subject to changes, errors and prior sale. We would be happy to answer any further questions by telephone.

Condition: used, Year of construction: 2010, functionality: fully functional, machine/vehicle number: M 09.10.288, product width (max.): 700 mm, product length (min.): 120 mm, input voltage: 400 V, working height: 850 mm, input frequency: 50 Hz, Equipment: documentation/manual, Kallfass Universa 700 – Fully-Automatic Side Sealer + KALLFASS Schrinktunnel COMPAKT650 D Industrial packaging machine for shrink-wrapping larger products such as picture frames, furniture, insulation material and similar goods. Manufactured by Kallfass Verpackungsmaschinen GmbH (Germany), CE certified. Hedjzwld Hspfx Abkonu Key specs: Max. production speed: up to 65 packs/min Cross seal bar width: 750 mm Max. sealing frame height clearance: 300 mm Min. product length: 120 mm Film: centre-folded or flat, 12–80 micron; reel diameter up to 400 mm, width up to 900 mm Permanently heated seal bar with exchangeable sealing ledge, maintenance-free, PLC temperature control Siemens S7 PLC with colour touchscreen operator interface (multi-language) Power: 400V, 50Hz, 3-phase, 3.5 kVA Dimensions: approx. 2500 x 1400 x 2100 mm Colour: Kallfass Anthracite Complete with original technical documentation and CE declaration of conformity.

Year of construction: 2015, condition: used, Table dimensions: 1250x800x1200mm, connected load: 4kW, length: 1000mm, width: 1850mm, height: 1600mm, with documentation, no maintenance has been carried out, an on-site inspection is possible. Hnedpfx Aboz Sr N Rjksu

Condition: used, Year of construction: 2016, functionality: fully functional, machine/vehicle number: 490000709, pressing force: 25 t, bale length: 1,200 mm, bale width: 780 mm, bale height: 700 mm, bale weight: 280 kg, total width: 1,700 mm, total height: 2,370 mm, total length: 1,248 mm, type of input current: three-phase, input voltage: 400 V, input current: 8 A, overall weight: 1,210 kg, power: 4 kW (5.44 HP), input frequency: 50 Hz, Turn your waste paper into money! With the HSM V-Press 825 plus pro, you can transform loose cardboard and waste paper into compact, marketable bales. We sell our own cardboard bales to a recycling company – take advantage of the potential of your recyclable materials! The purchase conditions depend on the material quality, quantity, and regional buyer. At the same time, you reduce cardboard piles, gain valuable storage space, and create order in your business. We are selling our vertical baling press, the HSM V-Press 825 plus pro, model year 2016, directly from our facility. Your advantages: • Fully functional • Maintained by a specialist company • DEKRA-certified • Suitable for cardboard, paper, and film • Inspection and demonstration possible while powered Ideal for production companies, warehouses, mail-order businesses, and commercial enterprises that want to collect their packaging waste in a space-saving manner and prepare it for recycling. Technical data: • Model: HSM V-Press 825 plus pro • Year of manufacture: 2016 • Pressing force: 250 kN (approx. 25 tons) • Bale dimensions: 1,200 × 780 × max. 700 mm (L × W × H) • Bale weight: up to 280 kg, depending on the material • Motor power: 4.0 kW • Power connection: 400 V three-phase / 50 Hz • Rated current: 8.5 A • Machine dimensions: 1,700 × 1,248 × 2,370 mm (W × D × H) • Machine weight: approx. 1,210 kg • Machine number: 6152.314 • Serial number: 490000709 See for yourself how the press works! Arrange an inspection appointment now in Simmozheim near Stuttgart. Send us your desired date via "Send Inquiry" or call us directly. Hjdpoz Ad Rpefx Abkonu

Condition: excellent (used), Year of construction: 2021, operating hours: 240 h, functionality: fully functional, operating pressure: 6 bar, We used the machine for PVC tarpaulins. The company is closing down. Technical details can be found in the photo. Hnsdpfx Abjzy E D Eoksu It has been running without issues, and no maintenance has been required to date, although this can certainly be clarified with the manufacturer in Italy. The machine functions perfectly; there is no overheating. A video call is possible. Three electrodes are included: one fixed electrode, 100 cm x 20 cm one fixed electrode, 50 cm x 2 cm one flexible electrode, 100 cm x 2 cm 400 L/minute 200/300 L of air Working pressure: 6 bar, max. 8 bar.

Condition: used, Year of construction: 2012, Air cushion machine, Fromm Airpad machine Manufacturer: Brüninghaus Type: AP 502 Year of manufacture: approx. 2012 Film material: PA/PE composite film or Polyethylene film (100% recyclable) Hodjwulylopfx Abkonu Compressed air connection: NW 10/4 - 8 bar; max. 82 Nl/min (during cushion production): max. 3.5 Nl/cycle Performance: 25 – 49 cycles/min. (depending on film type and cushion size) Electrical connection: 230 VAC; 50/60 Hz; 16 A; 2.0 kVA Dimensions: (L x W x H) 1,600 x 767 x 1,292 mm Weight: 230 kg Accessories / Special equipment: • Stored programs for various cushion sizes • Program change is activated with the push of a button • Cushions from 4 cm to 16 cm in length can be produced individually with a defined filling level • 10 programs are available for storing multiple parameters 51026ä

Condition: used, RETSCH Ultra Centrifugal Mill / Laboratory Mill / Fine Grinding RETSCH ZM 200 Ultra Centrifugal Mill incl. DR 100 dosing unit and extensive accessories For sale is a used ultra centrifugal mill from the manufacturer RETSCH, including a DR 100 dosing unit and extensive accessories as shown in the pictures. The ZM 200 is suitable for rapid fine grinding of various materials and for use in laboratories, research, development, and quality control. Technical data ZM 200: Manufacturer: RETSCH GmbH Type: ZM 200 Equipment type: Ultra Centrifugal Mill Power connection: 1~ 200–240 V Frequency: 50/60 Hz Power according to nameplate: 1100 W Current consumption: 12 A Dimensions (L × W × H): approx. 515 × 410 × 365 mm CE marking Dosing unit: RETSCH DR 100 Dosing unit for controlled material feed with adjustable dosing speed Interfaces ZM 200: Connection for DR 100 RS232 RS485 Hnodezxqhyepfx Abkeu Equipment: RETSCH ZM 200 Ultra Centrifugal Mill RETSCH DR 100 dosing unit Digital control and display panel Feeding hopper Collection container Rotor / grinding tool as shown in the pictures Numerous ring sieves / sieve inserts in various designs Several hoppers and stainless steel parts Further extensive original RETSCH accessories as shown in the pictures Application areas: Laboratory and research Fine grinding Sample preparation Material testing Quality control Research and development Scope of delivery: 1 × RETSCH ZM 200 Ultra Centrifugal Mill 1 × RETSCH DR 100 dosing unit 1 × Operating manual ZM 200 1 × Operating manual DR 100 Feeding hopper Collection container Rotor / grinding tool as shown in the pictures Numerous ring sieves / sieve inserts Various hoppers, containers and accessories Further accessories as shown in the pictures Weight approx. 45 kg Condition: Used Signs of wear The table shown in the photos and other items not explicitly mentioned are not included in the sale. Shipping or freight forwarding possible. Subject to change, errors and prior sale. We are happy to answer further questions by telephone.

Condition: new, power: 355 kW (482.67 HP), fuel type: diesel, axle configuration: 3 axles, color: white, gearing type: automatic, emission class: euro6, Year of construction: 2026, Equipment: ABS, air conditioning, electronic stability program (ESP), navigation system, parking heater, soot filter, FAN XF 480 NGD Roll-off Tipper PHT 20 Palfinger Options: - CRYSTAL WHITE - Sleeper Cab - Aero Baseplate - Maintenance-free mechanical 4-point cab suspension with integrated shock absorbers Hnsdpoz Hr Iuofx Abkou - Light-transmitting sun visor - LED headlights, cornering lights and fog lights mounted on the bumper - LED headlights - LED daytime running lights - Windshield made of two-layer laminated glass with sun protection film - Double-glazed windows in the rear wall of the cab - Tempered, single-layer safety glass - Main mirror and wide-angle mirror - DAF Corner View - Leather-covered steering wheel - Interior trim color: Luxury - Dashboard design: Vision - Cab, interior trim: Hexagon - Air-suspended driver's seat - Super Air - Adjustable armrests on both sides of the driver's seat - The driver's seat is attached to the cab floor - Foldable co-driver seat with table function - Extendable dashboard table on the upper center console - Open storage compartment on the center console - Refrigerator and drawer below the lower sleeping berth - Xtra Comfort spring core mattress, thickness 150 mm - Protective net on the lower sleeping berth - Curtains along the windshield and side windows - LED interior lighting for the cab - Automatic temperature control (ATC) - 6 kW water-air auxiliary heating with waste heat pump and timer - Roller blind on the driver's side - Roller blind on the co-driver's side - Roof hatch with electric operation - Electric windows - Additional accessory power supply 2 x 24 V / 40 A - ECAS remote control with illuminated buttons - PACCAR Connect subscription - DAF infotainment system including DAF Truck Navigation - Luxury speaker system - Predictive Cruise Control - Driver Performance Assistant (DPA) - Speed limiter recognition - DAF Drowsiness Detection and Distraction Detection - Lane change warning system - Electronic Stability Control (ESC) - Acoustic reversing warning system - Hill start assist - Front axle type 163N - Driven rear axle - Tag axle load 8.0 t - Axle load monitoring - Axle load limiter 11.5 t - Parabolic suspension at the front - Lifting mechanism for the steered tag rear axle - Tire supplier Goodyear - Tire pressure monitoring - Steel disc wheels, silver-grey - Tire size 315/70R22.5 - Engine MX-13, 6-cylinder diesel engine with multi-stage torque, 12.9 liters. Power: 355 kW - 483 hp at 1600 rpm - Emission class Euro 6 - ECO mode - Idle shutdown, after 5 minutes of idling - Automated transmission, TraXon, 12 gears - Automated direct-drive transmission TraXon 12TX2620, gear ratio 16.69-1.00, 12 gears - Traction assistance 15.0 t - Software for automated transmissions - Rear axle ratio 2.69 - Driven rear axle with mechanical differential lock - MX Engine Brake - Pneumatic control for parking brake - Spring brake cylinder 1, front axle - Parking brake assist - Wheelbase 4.80 m / rear overhang 2.70 m - Longitudinal member height 310 mm, thickness 7.0 mm. Internal reinforcement front and rear - 620-liter aluminum fuel tank on the left side, height 620 mm - Drawbar crossmember with ringfeder trailer coupling - Pneumatic connection for trailer with swivel couplings - Electrical connection for trailer, 24 V with 15-pole socket - ECAS control - LED side marker lights - Rear engine PTO, mounted on the MX-13 engine in the 13 o'clock position, with direct pump connection - Generator 130 A, batteries 2 x 210 Ah AGM - Battery power

Condition: excellent (used), Year of construction: 2022, total width: 640 mm, total length: 1,150 mm, total height: 670 mm, pressure: 10 bar, air demand: 72 m³/h, tank capacity: 40 l, overall weight: 72 kg, Selling a complete media blasting kit, including: - NOVGOM40 media blaster - Sieve for abrasives, 50 mesh - Double venturi nozzle, tungsten carbide, 6.5 mm diameter - Nova3 helmet kit - Cable harness for blaster + 10 m extension cable - Cooler, ref. 2521 Hnsdpfx Absz Rw Rqskeu

Year of construction: 2021, condition: ready for operation (used), functionality: fully functional, machine/vehicle number: 001-549, TECHNICAL DETAILS Hjdpez Agxisfx Abkonu Stretch film Maximum film height: 500 mm Maximum roll diameter: 250 mm Core diameter: 76 mm Film thickness: 10–35 µm

Condition: used, Universal Shaker Accessories / Clamping Devices Universal Shaker Accessory Kit Precision clamping devices, angle adapters, adapter elements, and holding devices for vibration test benches, vibration tests, and special designs For sale is a used accessory kit for an electrodynamic shaker or vibration test bench. The kit consists of numerous solid aluminum clamping devices, angle adapters, adapter plates, clamping blocks, holding elements, precision chucks, and other accessories for vibration tests. Ideal for test specimen mounting, special designs, and customized test setups. Technical data: Manufacturer: unknown Type: Accessory kit for electrodynamic shaker / vibration test bench Material: predominantly aluminum Design: Clamping devices, angle adapters, adapter elements, and fasteners Components: Several clamping devices Angle adapters of various sizes Precision adapter elements Clamping blocks Adapter plates Aluminum rings Holding and fastening elements Other accessories as shown in the pictures Features: Solid aluminum construction Precision-engineered components Threaded holes and clearance holes Universally applicable Clamping devices Angle adapters Adapter elements Clamping blocks Accessories as shown in the pictures Applications: Electrodynamic shakers Vibration test benches Vibration testing Material testing Environmental simulation Research and development Automotive industry Hodpfxozpya Hj Abkenu Aerospace Test specimen mounting and special designs Scope of delivery: Complete accessory kit as shown in the pictures Clamping devices Angle adapters Adapter plates Clamping blocks Adapter elements Aluminum rings Other accessories as shown in the pictures Weight: 600 kg Condition: Used Optical condition as shown in the pictures. Normal signs of wear and tear, scratches, and pressure marks are present. Only the accessories shown in the photos are being sold. The table shown in the photos, and any other items not explicitly mentioned, are not included in the sale. Shipping on a pallet or collection is possible. Subject to changes, errors, and prior sale. We will gladly answer any further questions by telephone.

Condition: used, Year of construction: 2006, functionality: unexamined, Film cutting machine, robust model FSM L15 Year of manufacture: 2006 Location: Bad Tölz Hodpfx Aszudzfobkonu Inspection is welcome. We have other used machines available. Please feel free to contact us.