Used roller coater for sale (40)

Condition: used, Year of construction: 2019, Paint application machine with reverse-running metering roller. Application machine for primers and top coats. Adjustable speeds via frequency converter for transport, Nledpezf N Tusfx Acmoc application roller, and metering roller. Control panel with touch screen for setting all machine parameters. - Manufacturer: Cefa/Sorbini - Type: SMARTCOATER MF-EVO - Year of manufacture: 2019 - Working width: 1.300 mm - Working height: 880 mm - 940 mm - Workpiece height: 3 - 80 mm - Operating side: right - Paint application roller ~ 50 - 60 Shore - Application quantity ~ 4-50g/m² - Roller diameter: 250 mm - Dosing roller: 173 mm - Dosing roller with switchable reverse operation - Double diaphragm pump 1 piece - Transport system with belt - Compressed air connection: 6 bar - Mobile on flanged rollers - Feed speed ~ 4 - 20 m/min - Control cabinet on the machine, traveling with it - Volts, Hz 400 / 50 - Voltage fluctuations max. +/- 5 % - Location: not in stock - Available from August 2026

Condition: used, Year of construction: 2001, - Manufacturer Barberan - Type BRB-1400 - year of construction 2001 - Working width 1330 mm - Working height ~ 880 - 900 mm - Part height ~ 5 - 100 mm - Operating side right - Lacquer application roller ~45 Shore - Roller diameter 245 mm - Application cylinder speed 4 - 24 m/min - Quick-change system Application roller - Hard chrome-plated metering roller 174 mm - Dosing roller Speed 4 - 24 m/min Nsdpfx Ajzf N I Socmelc - Reverse drive - Solvent-resistant conveyor belt - Double diaphragm pump - Travelling on flanged rollers without - Feed adjustable via frequency converter 5 - 25 m/min - Length: 980mm - Width: 2.800mm - Weight 1,680 kg - Volt, Hz 400 / 50 - Location, in stock - Machine has been overhauled in 2022

Condition: used, Year of construction: 1998, - Producer Sorbini - Type T/20MF - Year of construction 1997 - Working width 1.300 mm - Maschine is overhauling, very good condition Nedpfx Aezf N Hhscmolc - Working height ~ 880 - 920 mm - Part height ~ 5 - 80 mm - Operating side, left - roller diameter ~ 248 mm - Metering roller ~ 174 mm - Reverse drive - Double diaphragm pump 1 Stk. - Length 950 mm - Width 2.550 mm - Height 1.540 mm - Weight ~ 1.220 kg - With switch cabinet - Voltage / HZ 400 / 50 - Location, on stock - Voltage fluctuation max. +/- 5 % THE PICTURES are not original pictures, They are only an example of a reconditioned machine

Condition: used, Year of construction: 1997, machine/vehicle number: MR1TLL97037, - Manufacturer Cefla / Sorbini - Type T / 20-SP-1 - year of construction 1997 - Working width 1300 mm - working height 880 - 940 mm - Part height ~ 3 - 80 mm - Operating side right - Filler application cylinder ~250 mm - Hard chrome-plated metering roller 174 mm - Hard chrome-plated smoothing roller 245 mm - Reverse drive - Belt transport - Belt control - Length ~ 1640 mm Nedpfx Acezf N E Rsmolc - width 2590 mm - height ~ 1700 mm - Feed rate 6 - 24 m/min - Total connection 4.5 kW - Weight 2,000 kg - With switch cabinet - Volt, Hz 400 / 50 - Location, not in stock

Condition: used, Year of construction: 2001, - Producer Bürkle - Type CASC 1400 - Year of construction 2001 - Working width 1350 mm - Working height 900 + - 20 mm - Part height ~ 5 - 100 mm - Operating side, right - Roller for putty EPDM, 240 mm - Qick changes system for roller - Metering roller 198 mm - Smoothing roller hard chromed 240 mm - Belt transport system - Length ~ 1.450 mm - Width ~ 2980 mm - Mobile, with flange of wheel - Feed speed 5 - 25 m/min - With switch cabinet - Voltage / HZ 400 / 50 - Location, on stock Nedpfx Aszf N Ewecmelc - Commodity code 84242000 - Voltage fluctuation max. +/- 5 %

Condition: like new (used), Year of construction: 2023, operating hours: 1 h, functionality: fully functional, height adjustment type: electric, working range: 400 mm, warranty duration: 6 months, Roller coating machine Manufacturer: Cosma Type: 400 RC Year of manufacture: 2023 (demonstration machine – never used in production!) Includes 6 months warranty on used machinery 2-roller coating machine for applying oil The Cosma roller coating system is used to apply oils to solid wood flooring (parquet), paneling, stairs, garden materials, scaffolding wood, and wall decorations, among other things. Working width: 400 mm Njdpozgvlmsfx Acmelc Suitable for workpieces with a thickness of: 10 - 50 mm Working height: 900 mm Equipped with: - Metering roller, 0.37 kW - Rubber-coated coating roller, 0.37 kW, 25 Shore With electric height adjustment and mechanical height indicator Control panel for: Feed speed, amperage per roller, and height adjustment of the rollers

Condition: used, Hymmen CombiCoater ELX-S 1400 painting system with UV dryer. - Technical specifications will be provided shortly. Nlsdpfx Aslf H Tcscmoc - For self-dismantling and self-collection.

Condition: good (used), functionality: fully functional, We are selling various used rollers here, which are used in laminating systems manufactured by Bürkle. All rollers are designed for a processing width of 1,300 mm. Type and condition are listed below. 1. Applicator roller for adhesive, 1,300 mm, ⌀ 240 mm, newly rubberized, price: on request 2. Applicator roller for adhesive, 1,300 mm, ⌀ 240 mm, newly rubberized, price: on request 3. Applicator roller for adhesive, 1,300 mm, ⌀ 240 mm, newly rubberized, price: on request 4. Applicator roller for adhesive, 1,300 mm, ⌀ 240 mm, newly rubberized, price: on request Nodsvnaa Iopfx Acmslc 5. Applicator roller for hardener, 1,300 mm, ⌀ 240 mm, newly rubberized, price: on request 6. Applicator roller for hardener, 1,300 mm, ⌀ 240 mm, newly rubberized, price: on request 7. Applicator roller for hardener, 1,300 mm, ⌀ 240 mm, used, price: on request 8. Applicator roller for hardener, 1,300 mm, ⌀ 240 mm, used, price: on request 9. Metering roller for adhesive, 1,300 mm, ⌀ 180 mm, newly rubberized, price: on request 10. Metering roller for adhesive, 1,300 mm, ⌀ 180 mm, newly rubberized, price: on request 11. Metering roller for adhesive, 1,300 mm, ⌀ 180 mm, newly rubberized, price: on request 12. Metering roller for hardener, 1,300 mm, ⌀ 180 mm, newly rubberized, price: on request 13. Metering roller for hardener, 1,300 mm, ⌀ 180 mm, newly rubberized, price: on request All rollers are used and are sold without warranty.

Condition: good (used), Code: 0442 Brand: VALTORTA Model: FV/TR Roller coater machine REVERS for rollcoating of basecoats and U.V. top coats Conveyor feed system with auto-centering system to keep the belt in track Nledju T Hbwopfx Acmec Working width mm 1300 Working table height from the floor mm 900 Working thickness mm 1/180 1 Rubber covered spreading roll diameter mm 240 1 Steel dosing roll unit n° 1 diameter mm 165 1 Rubber covered spreading roll REVERS unit diameter mm 240 1 Steel dosing roll REVERS unit diameter mm 165 Rubber covered conveyor rolls diameter mm 190 Rubber covered conveyor rolls diameter mm 60 Rubber covered roll motor power Hp 2 Steel roll motor power Hp 1 Rubber covered roll REVERS unit motor power Hp 2 Steel roll REVERS unit motor power Hp 1 Doctor blade REVERS unit motor power Hp 0,5 Feed speed mt/min 6/30 Independent electrical cabinet with easy commands Machine installed on wheels and rails Overall dimensions mm 2700 x 2000 x 1550 h Weight kg 2700

Condition: used, Year of construction: 2004, machine/vehicle number: 10720, working width: 1,300 mm, power: 3.2 kW (4.35 HP), table length: 400 mm, table width: 1,300 mm, number of rollers: 2, No minimum price – guaranteed sale to the highest bidder! The machine must be collected between June 10, 2026, and June 30, 2026! TECHNICAL DETAILS Working width max.: 1,300 mm Nlodpfxsy Uv Ade Acmec Number of rollers: 2 Table width: 1,400 mm Table length: 400 mm MACHINE DETAILS Total power: 3.2 kW EQUIPMENT CE marking The machine will be sold and delivered in its actual and legal condition (“as is, where is”) based on photographic documentation and technical/commercial documents of a descriptive nature. The buyer has the right to inspect the goods before collection and assumes responsibility for the installation, securing, and use of the machine at the destination. External reference: 8533

Condition: ready for operation (used), machine/vehicle number: 5981, Working height: 870 mm Working width: 1300 mm Conveyor belt width: 1270 mm Conveyor speed: 6–30 m/min, infinitely variable Passage height: 3 mm – 80 mm 1 rubber-coated applicator roller, 238 mm diameter, coating 5 By 1 1 chrome-plated dosing roller, 174 mm diameter Electrical equipment: operating voltage 400 V, 50 Hz 3 phases Total connected load: 1.9 kW Nlsdpfjyah Uzox Acmsc Motors and switchgear in EX-protected design Additional equipment: separate drive for the dosing roller, infinitely variable, with oscillating dosing blade Operator side: left Machine length: 1000 mm Weight: 1000 kg

Condition: good (used), Year of construction: 2021, working width: 400 mm, height adjustment type: electric, Roller application machine Manufacturer: Cosma Type: 400 RC Year of manufacture: 2021 2-roller application machine for applying oil With the Cosma roller application system, oils are applied to, among other things, solid wood floors (parquet), paneling, stairs, garden material, scaffolding wood, and wall decorations. Working width: 400 mm Nedpfxey Ic Ums Acmslc Suitable for workpieces: Thickness: 10 - 50 mm Working height: 900 mm Equipped with: - Dosing roller, 0.37 kW - Rubber-coated application roller, 0.37 kW, 25 Shore With electric height adjustment and mechanical height display Control panel for: Feed speed, amperes per roller, and roller height adjustment

Condition: excellent (used), Year of construction: 2014, Roller coater BÜRKLE easy coater RCL 12M and UV system easy cure UV - TRUV with 2 lamps and 2 x roller conveyor BÜRKLE easy coater RCL 1300: For one-sided application on flat surfaces from above Operating side left Touch screen control TP 177 Micro Rubberized application roller Hard chrome-plated metering roller can be sensitively adjusted via worm gearbox Controlled belt transport with exposed counter roller for safe workpiece transport Quick-change system with split bearing and cross-disc coupling for easy changing of the application roller Oscillating squeegee, can be changed quickly for cleaning Separate, infinitely variable FU direct drives for application roller, metering roller and transport Reversible dosing roller Motors and limit switches in Ex version on the machine Non-Ex control cabinet and control panel outside the danger zone on the machine Mobile version Nedpjt Dx U Sefx Acmjlc Electrical preparation for integrating the roller coating machine into a coating line Technical data Working width: 1300 mm Workpiece height 3 - 80 mm Min. workpiece length 400 mm Rubberized application roller DM 240 mm Chrome-plated metering roller DM 172 mm Transport speed 2 - 15 m/min variable Connected load approx. 2.4 kW Speed of metering roller 1.0 - 3.0 m/min Working height 900 mm (+/- 20) Safety equipment according to CE Incl. switch cabinet Weight approx. 1650 kg UV system e.a.s.y. cure UV - TRUV with 2 lamps One-sided curing of UV-curing lacquers on flat workpieces from above Incl. control cabinet Working width max 1300 mm Workpiece height max 80 mm Number of lamps 2 # - changed 10/2023 UV lamp power 120 W/cm² each Speed 2 - 15 m/min variable Transport: Transport carpet Exhaust air connection 2 x 250 mm Connected load 39 kW Weight approx. 750 kg 2 x roller conveyor RB 1300 Working width 1300 mm length 4000 mm Speed 2 - 15 m/min variable Connected load 2 x 0.37 kW Total system length 12450 mm

Condition: ready for operation (used), Year of construction: 2007, Brand: Sorbini Model: VS/33-ACT-F Machine no.: MP1SCO27052 Year of manufacture: 2007 Nlodpfxsxtal Do Acmsc Compressed pneumatic air Pneumatic propellers Motor: 1.6 kW Weight: 1150 kg Stock no.: 2002709BXA

Year of construction: 2001, condition: like new (used), Roller coater Brand:Sorbini Nljdpefw Nc Ujfx Acmec Type:T/20-MF No:MR1RFF21488 Year:2001 The T20 roller coater has been designed as an addition to SORBINI´S extended line of products. The machine is used for finishing flat boards in general with various types of coating products (e.g.polyurethane, polyester, acrylic and water-based finishes) The modular design makes it possible to obtain a wide range of applications which cater for all specific user requirements. Techn info: Working width max 1300mm Thickness of workpiece 0-80mm Feeding speed 3-20 m/min Feeding motor0,737kw Doctor roller motor 0,75kw Applicator roller motor 0,75kw Doctor roller diameter 174mm Applicator roller diameter 248mm Working hight 80 till 950mm Compressed air requirements 6 bar 9l/min Air pump pressure 2-10bar Air pump capacity at max pressure 30l/min of 10 bar Dimension 950x2550x1450mm (lengthxwidthxhight) Total weight 1220Kg Stock no:104326BXA

Condition: ready for operation (used), Year of construction: 2003, machine/vehicle number: 10362, Brand: Burkle Model: SLC Machine no: 10362-01 Year of manufacture: 2003 Technical data of the machine (BURKLE SLC) General data - Type: SLC - Working width: 1300 mm - Working height: 900 ± 20 mm Workpieces - Workpiece characteristics: Flat, self-rigid - Workpiece width (max): Working width - Workpiece width (min): 350 mm - Workpiece length: 3 - 100 mm - Tolerance of the workpiece height over the entire working width: - Single track operation: ± 0.5 mm - Multi-track operation: ± 0.2 mm - Workpiece weight (max): 250 kg Nlsdpfjv Hn N Uox Acmsc Piling material - Inspection material/cleaning agent with a self-ignition temperature: ≥ 200 °C Transport unit - Back pressure roller: See order confirmation - Rubber ring: See order confirmation - Diameter: 186 mm - Feed speed: 8 - 25 m/min Material circulation - Material pump feed capacity (double stroke): 575 cm³ Piling unit Piling roller - Rubber ring: See order confirmation - Diameter: 238 mm - Temperature (in case of optional heating/cooling application roller): Max 60 °C - Peripheral speed: Approx. 8 - 25 m/min Dosing roller - Diameter: 174 mm - Temperature (with optional heated/cooled dosing roller): Max 60 °C - Peripheral speed: Approx. 3 - 9 m/min Accuracy of application over the entire working width at: - Application rate > 10 g/m²: ± 5 %. - Application rate < 10 g/m²: ± 10 % Adjustment of the feed-through height - Feed-through height (max): 120 - 5 mm - Accuracy of setting: ± 0.1 mm Compressed air connection - Required air pressure: 6 bar - Compressed air consumption: Approx. 50 NI/min Dimensions / weights - Dimensions: See installation drawing - Weight at working width 700 / 1300 / 1600 mm: 1250 / 1450 / 1600 kg Electricity - Connection values, voltages: See data sheet for electricity Other information - Noise level: < 70 ± 4 dB (A) Table 1-4: Technical data for standard sizes of the machine (continued) Note: The speed is limited to a maximum of 20 m/min when the dosing roller and height setting are set to a safety distance exceeding 120 mm (cleaning coupling). Stock no: 2002443BXM

Condition: used, Year of construction: 2001, machine/vehicle number: 9646-11, - Manufacturer: Bürkle - Type: SLC - Year of manufacture: 2001 - Right-hand operation - For single-sided application of lacquer - Oscillating application roller squeegee Technical data: - Maximum working width: 1300 mm - Conveyor belt width: 1270 mm - Workpiece thickness 3 - 120 mm - Installation length: ~ 800 mm - Width: ~ 2,800 mm - 1 piece, rubberized application roller, approx. D: 238 mm - Application roller Shore hardness: 45 (can be changed) - 1 piece, chrome-plated metering roller, D: 174 mm - 1 piece, counterpressure roller, D: 186 mm - Transport speed, adjustable from approx. 6 - 30 m/min. - Working height ~ 900 mm Njdpfx Aeyifwijcmjlc - Passage height approx. 3 - 80 mm - Compressed air 6 bar, G1/4 inch, approx. 50 NL/min. - Operating voltage 400 V, 50 Hz, 3 phases - Total connected load approx. 2 kW - With control cabinet - Weight approx. 1,400 kg - Location: in warehouse 32825 Blomberg

Condition: used, Year of construction: 2008, machine/vehicle number: 0117580020, Printing machine for non-synchronized printing of wood grains or other designs from above on flat workpieces in one-colour printing, suitable for aqueous and UV printing inks. - Type: SLDR 1300 - Year of manufacture: 2008 - Operating side: right - Workpiece width: 1.250mm - Min. workpiece length: 350mm (300mm) - Workpiece height: ~ 3-100mm - Suitable for printing ink, water-soluble and UV printing inks Transport system: - Conveyor belt width: 1,230mm - Max. Production speed: 10m/min. - Feed speed: 8-25m/min. - Rubber coating 60Shore (6By1) - Diameter 186mm Application unit: - Rubber coating 50Shore (5by1) - Diameter: 238mm Nljdswhp Dzjpfx Acmjc - Engraving cylinder, diameter: 174mm - Separate, infinitely variable FU direct drive for engraving cylinder and application roller. Engraving roller: - Diameter - circumferential speed Machine dimensions: - Installation length: 800mm - Working height approx. 900mm +-20mm - Width: ~ 2.700mm - Electrical connected load: 5kW - Weight: approx. 1.400kg - Location: in stock

Condition: used, Year of construction: 2001, machine/vehicle number: 9646-27, - Manufacturer: Bürkle - Type: SLC - Year of manufacture: 2001 - Operating side: left - For single-sided application of lacquer - Oscillating application roller squeegee Technical data: - Maximum working width: 1.300 mm - Minimum workpiece length: 350 mm - Maximum workpiece weight: 250 kg - Conveyor belt width 1.270 mm - Workpiece thickness 3 - 100 mm - Machine length: 800 mm - Machine width: 3.200 mm - Application roller, rubberized, EPDM approx. D: 238 mm - Application roller Shore hardness: 45 (can be changed) - Metering roller, chrome-plated, D: 174 mm - Counterpressure roller, rubberized, D: 186 mm - Conveyor speed, adjustable from approx. 8-25 m/min. - Working height ~ 900 mm + - 30 mm - Clearance height approx. 3 - 80 mm - Compressed air 6 bar, G1/4 inch, approx. 50 NL/min. - Operating voltage 400 V, 50 Hz, 3 phases - Total connected load approx. 5.5 kW Nlsdpfx Ajykuzvscmec - With control cabinet - Weight approx. 1.450 kg - Location: in stock 32825 Blomberg

Condition: excellent (used), ROLLER COATER (REVERSE) Max working width mm 1300 Length of the machine mm 1600 approx Built-in Electric and command cabinet Feeding system by motorized rollers (power KW 0.75) Feeding speed adjustable (from 6 to 24 m / min) Total installed power KW 4,3 No. 2 working heads: * 1st head (with 2 rollers) Chromium plated Dosing roller diam. mm 174 + Rubbered Spreading roller diam. mm 248, with 2 adjustable speed variators (power KW 0.37 + KW 0.75), with also a counter-placed (bottom side) reference rubbered roller * 2nd head (with 2 rollers) Chromium plated Dosing roller diam. mm 174 + Rubbered Spreading roller diam. mm 248, Nedpfx Ajf E Npkscmelc with 2 adjustable speed variators (power KW 0.37 + KW 0.75), with also a counter-placed (bottom side) reference rubbered roller

Condition: excellent (used), ROLLER COATER (REVERSE) Max working width mm 1300 Length of the machine mm 1600 approx Built-in Electric and command cabinet Feeding system by motorized rollers (power KW 0.75) Feeding speed adjustable (from 6 to 24 m / min) Total installed power KW 4.1 No. 2 working heads: * 1st head (with 2 rollers) Chromium plated Dosing roller diam. mm 174 + Rubbered Spreading roller diam. mm 248, Nledeidqwpopfx Acmsc with 2 adjustable speed variators (power KW 0.37 + KW 0.75), with also a counter-placed (bottom side) reference rubbered roller * 2nd head (with 2 rollers) Chromium plated Dosing roller diam. mm 174 + Rubbered Spreading roller diam. mm 248, with 2 adjustable speed variators (power KW 0.37 + KW 0.75), with also a counter-placed (bottom side) reference rubbered roller

Condition: excellent (used), ROLLER COATER with SINGLE SPREADING-COATING ROLLER Max working width mm 1300 Nlsdpfx Aegz Swlscmec Length of the machine mm 900 (ca.) Thickness of the panels (working height): mm 3 - 80 Adjustable feeding speed: m/min 5 -20 PLC control pane (Touch Screen) Telemecanique/Schneider Built-in electric and command panel Total installed power KW 2,9 Equipped with: 1°) Dosing unit (Chromium plated Doctor roller diam. mm 173, KW 0,75 ca.) 2°) Coating unit (Rubbered spreading roller diam. mm 250 (ca.) KW 0.75, with a rubbered bottom roller, counter-placed to the top one (diam. mm 182 ca., (ca.) KW 0,75)

Condition: excellent (used), ROLLER COATER with SINGLE SPREADING-COATING ROLLER Max working width mm 1300 Length of the machine mm 900 (ca.) Thickness of the panels (working height): mm 3 - 80 Adjustable feeding speed: m/min 4 -20 PLC control pane Separate (from the machine's body) electric and command cabinet Total installed power KW 8 Nljdpfogz Swwox Acmec Equipped with: 1°) Dosing unit (Chromium plated Doctor roller diam. mm 173, KW 0,75 ca.) 2°) Coating unit (Rubbered spreading roller diam. mm 250 (ca.) KW 0.75, with a rubbered bottom roller, counter-placed to the top one (diam. mm 182 ca., (ca.) KW 0,75)

Condition: good (used), Year of construction: 1992, working width: 1,300 mm, Double-sided glue applicator / 2-roller glue applicator Manufacturer: AMOD / Bürkle Type CDL 1300 Suitable for double-sided glue application Working width 1300 mm With 2 new galvanized dosing bars Nedpsv Sa Utefx Acmelc Operating voltage 380 V 2-phase 50 Hz Control voltage 220 V Rated current 1 A Fuse protection 16 A (provided by customer) Including 2 additional glue rollers / good visual condition The machine will be technically inspected and cleaned upon order.

Condition: excellent (used), Year of construction: 2011, BÜRKLE PAINT LINE Model year: 2011 Stock no.: 2002451BXM Consisting of: Disc conveyor 900 Roller coating machine e.a. sy-Coater RCLD 1300 Distribution/scraping brush machine VBM 1300 Cleaning machine RMB 1300 Disc conveyor 900 Central cabinet, Control panel with touch screen Technical data: Software Easy line, touch screen TP177 Micro Working width = 900/1300 mm, working side right Feed speed 5–25 m/min Distance between machines approx. 25 mm Power: 400 volts, 50 hz, 3 phases, rated power 10kw, rated current 23 AMP, fuse 35 AMP Electrical cabinet 1600x500x2200mm Operating side right Pneumatics Air pressure 6 bar P1 | G 1/4 | 50 NL/min P2 | G 1/4 | 10 NL/min Extraction per connection point At air speed approx. 24 m/sec. 140 mm | 1100 m³/h Roller application machine Bürkle RCLD09M Rubber application roller above/below Chrome-plated dosing roller above/below Working width 1300mm Workpiece length min. 400mm Workpiece height 3-80mm Nledpfev I Ur Sjx Acmjc Brushing machine VBM For:Scraping/brushing/polishing of liquid wood stains, (solvent or water-based stain) or for polishing UV waxes Working width 1300 Workpiece length min. 350mm Workpiece height 110mm Cleaning machine RMB For cleaning brushes 1 or 2 with cleaning agent (water or solvent) and drying them.