Used Moving Blades for sale (7,312)

Condition: new, Year of construction: 2025, The ZM101 is a pioneering product in our lineup, designed to sharpen sawblades with widths of up to 100 mm at a remarkable rate of 65 teeth per minute. This efficiency enables it to simultaneously service 3-4 bandsaw/sawmill machines. Equipped with an abrasive ceramic disk, the ZM101 can expertly sharpen all teeth with profiles. Its robust construction allows it to perform reliably under the most demanding conditions, making it a favorite among our customers. Additionally, its straightforward design ensures ease of use and low maintenance costs, further enhancing its appeal. Technical characteristics: Maximum length of the blade: 6000 (8000) mm Minimum width of the blade: 20 mm Maximum width of the blade: 100 mm Hsdpfxjxligus Aacjnu Maximum height of the tooth: 12 mm Front angle of the tooth: 0÷25° Tooth pitch: Profile N: 10, 12.5, 15, 20, 25 mm Profile WM: 22, 25 mm Working capacity: 65 teeth/min Size of the abrasive disc: Cut-in sharpening, profile N: ø200 x 10 x ø32, ø200 x 13 x ø32 mm Profile sharpening, profile WM: ø200 x 8 x ø32, ø200 x 10 x ø32 mm Voltage: 380 V Power of the electric motors: 0.09 and 0.37 kW Size: Without band saw holder (L x W x H): 750 x 550 x 1100 mm With band saw holder (L x W x H): 2000 (3000) x 1000 x 1100 mm

Condition: new, Year of construction: 2025, The ZM101 is a pioneering product in our lineup, designed to sharpen sawblades with widths of up to 100 mm at a remarkable rate of 65 teeth per minute. This efficiency enables it to simultaneously service 3-4 bandsaw/sawmill machines. Equipped with an abrasive ceramic disk, the ZM101 can expertly sharpen all teeth with profiles. Its robust construction allows it to perform reliably under the most demanding conditions, making it a favorite among our customers. Additionally, its straightforward design ensures ease of use and low maintenance costs, further enhancing its appeal. Technical characteristics: Maximum length of the blade: 6000 (8000) mm Minimum width of the blade: 20 mm Maximum width of the blade: 100 mm Maximum height of the tooth: 12 mm Front angle of the tooth: 0÷25° Tooth pitch: Profile N: 10, 12.5, 15, 20, 25 mm Profile WM: 22, 25 mm Working capacity: 65 teeth/min Size of the abrasive disc: Cut-in sharpening, profile N: ø200 x 10 x ø32, ø200 x 13 x ø32 mm Profile sharpening, profile WM: ø200 x 8 x ø32, ø200 x 10 x ø32 mm Voltage: 380 V Power of the electric motors: 0.09 and 0.37 kW Hodpfx Aajxlfwpjcjnu Size: Without band saw holder (L x W x H): 750 x 550 x 1100 mm With band saw holder (L x W x H): 2000 (3000) x 1000 x 1100 mm

Condition: new, Year of construction: 2024, functionality: fully functional, This powerful machine to meet the requirements of larger woodworking companies, ensuring exceptional sharpening results. Equipped with an electronic tooth counter and an autonomous cooling system. The ZM150 offers precise sharpening while maintainingoptimal operating conditions. With two electric motors, including a 150mm CBNdisk for sharpening and a motor reduction group for precise blade movement,this sharpener delivers outstanding performance. Hedpfxoxiv Ugs Aacsnu Power supply voltage - 380-400V Frequency - 50Hz Power - 0.20kVa Capacity - 65 teeth per min Blade width - 20 to 100 mm Tooth pitch - 6 -25mm Sharpening disc - Profiled 150mm CBN disc Weight - 115kg

Condition: ready for operation (used), total height: 2,950 mm, total width: 3,350 mm, total length: 11,400 mm, empty load weight: 4,900 kg, - 4-assig industrieel profielbewerkingscentrum - type SBZ 140 - Kan tot 5 zijden van een profiel bewerken - Bewerkingsmogelijkheden: boren, bewerken en draadtappen - Maximale bewerkingslengte met profielkopbewerking: 7480 mm - Maximale bewerkingslengte zonder profielkopbewerking: 7600 mm - De asgestuurde freeskop kan het profiel traploos bewerken op elke positie tussen 0° en 180° met alle beschikbare hulpmiddelen - 8 gereedschappen - 8 beweegbare klemmen - barcodelezer Implementatie Software nieuwe controle 2025 Versie: 9.1.1.10 / 2.31e automatisch profielmeetsysteem 2 extra clips compleet materiaal afstandsbedieningsconsole voor SBZ 140 8x verstelbaar klemmateriaal automatische detectie van de klempositie automatische positionering van eindapparatuur microdoseersysteem (gereedschapssmering) veiligheidsafdekking veiligheidslicht centrale spaanafvoer 2x pneumatische nul-aanval apart klemsysteem (shuttle) - Hoek: +90° -90° Nieuwprijs was 189.000 euro Longitudinal travel X-axe: 7900 mm Crosstravel Y -axe: 850 mm Hnedpfx Ajxpgg Hjacju Travel Z-axe (Height): 650 mm Power on spindle: 6 kW Admission in millingheadspindle (ISO): HSK-63 F Max speedrange: 24 000 rpm

Condition: good (used), Bezel, moving bezel, bezel, steady rest, lynette -Bezel: moving -Centre height: 185 mm -Edition: Brass -Dimensions: see photos / technical drawing Hedpoxn I Tljfx Aacsnu -Dimensions: 345/70/H370 mm -Weight: 7.7 kg.

Condition: excellent (used), suitable e.g. for ESTERER SS 56, 1,320 mm long x 140 mm wide x 2.2 mm thick, tooth pitch 22 mm, serrated facing 30 x 8 mm for JANSEN-Angel type no. 7 Hodpslu Dzxsfx Aacjnu

Condition: used, axle configuration: 3 axles, first registration: 01/2020, suspension: air, tire size: 385/55R22.5, Year of construction: 2020, Tyre size: 385/55R22.5 Axle brand: BPW EAC HD Brakes: Disc brakes Suspension: Air suspension Rear axle 1: Lift axle; Max. axle load: 9,000 kg; Tyre tread left: 20%; Tyre tread right: 20% Rear axle 2: Max. axle load: 9,000 kg; Tyre tread left: 30%; Tyre tread right: 30% Rear axle 3: Max. axle load: 9,000 kg; Tyre tread left: 60%; Tyre tread right: 60% Unladen weight: 8,010 kg Contact Bob Beukers for further information. Hodpfx Aasxcpbyjcsnu

Condition: used, Year of construction: 2000, travel distance X-axis: 9,000 mm, travel distance Y-axis: 1,500 mm, travel distance Z-axis: 1,500 mm, table width: 1,200 mm, table load: 5,000 kg, table length: 9,500 mm, Bed Milling Machine 5-axis Table size 9500 x 1200 mm. Movement x-Axis 9000 mm. y-Axis 1500 mm. z-Axis 1500 mm. Max table load 5000 kg/mtr Swiveling of vertical milling head 1°x1º CNC Control Heidenhain TNC 430 CB Hnodpfxexd Am So Aacju If you have any questions concerning the machine, please do not hesitate to contact us by phone or e-mail. Feel free to view our other advertisements for a complete overview of our stock.

Condition: ready for operation (used), controller manufacturer: Heidenhain 355, empty load weight: 11,500 kg, total length: 7,500 mm, total width: 3,500 mm, total height: 3,800 mm, Butler Elgamill X: 3000 - Y: 1670 - Z: 1050 mm Longitudinal travel X-axe: 3000 mm Cross travel Y-axe: 1050 mm Travel Z-axe: 1670 mm Hsdpjxpgh Rofx Aacsnu Dimensions clamping space- table: 3100 x 1200 mm Power on spindle: 30 kW Admission in millinghead (ISO): ISO 50 Max speedrange: 16 > 2000 rpm

Condition: good (used), Cutter knife, dicer, multi-purpose cutter, slicer and portion cutter, cutter knife, cutter knife, dicer, bacon cutter, gate, cutting gate -Manufacturer: Holac, cutting blade for meat cutter multi-purpose cutter dicer -Type: various versions, see photos .: 6x 2334850 / 3x 2334830 / 1x 2335190 thickness 1.6 / 1 / 2.7 mm -Price/Delivery: complete -Transport dimensions: 375/111/H20 mm -Weight: 1.6 kg Hnjdpfx Aaswzhfqjcou

Condition: used, axle configuration: 3 axles, wheelbase: 9,060 mm, first registration: 03/2010, suspension: air, tire size: 385/65R22.5, Year of construction: 2010, Axle configuration tire size: 385/65R22.5 Brakes: Drum brakes Suspension: Air suspension Rear axle 1: Lift axle; Max. Axle load: 9000 kg; Axle brand: BPW ECO Plus; Left tire tread: 40%; Right tire tread: 40% Rear axle 2: Max. Axle load: 9000 kg; Axle brand: BPW ECO Plus; Left-hand tire tread: 40%; Right-hand tire tread: 40% Rear axle 3: Max. Axle load: 9000 kg; Axle brand: BPW Eco Plus; Tire tread left: 60%; Tire tread right: 60% Dimensions Dimensions (L x W): 1404 x 255 cm Weights Unladen weight: 7,710 kg Hsdpeu Ur Apofx Aaconu Payload: 34,290 kg GVW: 42,000 kg Identification License plate: OK-72-ZN Further information Please contact Bob Beukers for further information.

Condition: ready for operation (used), controller manufacturer: Heidenhain 355, empty load weight: 8,400 kg, total length: 5,000 mm, total width: 2,720 mm, total height: 2,420 mm, CN 3 assen horizontale en verticale freeskop T-sleuven: 18 x H8 Afstand tussen T-sleuven: 80 mm Met de kop in de hoogste positie kan het werkstuk een maximale hoogte van 955 mm hebben. Longitudinal travel X-axe: 1800 mm Cross travel Y-axe: 800 mm Travel Z-axe: 800 mm Dimensions clamping space- table: 2000 x 630 mm Power on spindle: 15 hp Admission in millinghead (ISO): ISO 50 Hsdjxpgiuspfx Aacjnu Max speedrange: 25 > 3250 rpm

Condition: excellent (used), axle configuration: 3 axles, wheelbase: 9,060 mm, first registration: 03/2020, suspension: air, color: grey, tire size: 385/65, Year of construction: 2020, Equipment: ABS, = Additional options and accessories = - Electronic braking system (EBS) - Rear doors - Air suspension = Further information = Axle configuration Tyre size: 385/65 Axle brand: SAF CD Brakes: disc brakes Suspension: air suspension Rear axle 1: lift axle; Max. axle load: 9,000 kg; Tyre tread left: 50%; Tyre tread right: 50% Rear axle 2: Max. axle load: 9,000 kg; Tyre tread left: 90%; Tyre tread right: 90% Rear axle 3: Max. axle load: 9,000 kg; Tyre tread left: 70%; Tyre tread right: 70% Dimensions Dimensions (L x W x H): 1,404 x 255 x 400 cm Weights Hedsw I Ru Topfx Aacsnu Unladen weight: 7,900 kg Payload: 34,100 kg Gross vehicle weight (GVW): 42,000 kg Maintenance, history and condition APK (technical inspection): valid until 03/2026 Technical condition: very good Visual condition: very good Identification Registration number: OS-03-GT Further information Please contact Mark van der Steen for more information.

Condition: ready for operation (used), controller manufacturer: Heidenhain TNC 410, empty load weight: 9,000 kg, total length: 2,800 mm, total width: 2,540 mm, total height: 2,500 mm, CME BF-01 X: 1800 - Y: 700 - Z: 600mm Longitudinal travel X-axe: 1800 mm Cross travel Y-axe: 700 mm Travel Z-axe: 600 mm Dimensions clamping space- table: 1800 x 600 mm Power on spindle: 30 hp Admission in millinghead (ISO): ISO 50 Max speedrange: 3000 rpm Hsdpfexpgizox Aacenu Power needed (KVA): 11 kW

Condition: used, axle configuration: 3 axles, wheelbase: 8,420 mm, first registration: 04/2004, suspension: air, tire size: 385/65R22.5, Year of construction: 2004, Axle configuration Tire size: 385/65R22.5 Axle brand: SAF Brakes: disc brakes Suspension: air suspension Rear axle 1: Max. axle load: 9000 kg; tire profile left: 50%; tire profile right: 50% Rear axle 2: Max. axle load: 9000 kg; tire profile left: 50%; tire profile right: 50% Rear axle 3: Max. axle load: 9000 kg; tire profile left: 40%; Tire profile right: 40% Dimensions Dimensions (L x W): 1280 x 255 cm Weights Empty weight: 7,030 kg Payload: 31,970 kg GVW: 39,000 kg Identification Registration number: OH-60-LR Further information Contact Bob Beukers for more information. Hnodpfxju Ur Dae Aacou

Condition: ready for operation (used), controller manufacturer: Heidenhain, Type: ML120-12000 6 assen gelijktijdig (X / Y / Z / W / B / V) + 2-assige indexeerfreeskop (2,5°) 8 assen gelijktijdig (X / Y / Z / W / B / V) + continue orthogonale freeskop (A: +-120° / C: +-180°) Zware CNC frees- en boormachine / CNC vloerboor- en freesmachine ramgrootte: 630 x 500 mm - ramslag: 1250 mm spindeldiameter 130 mm - slag: 650 mm - zonder freeskop te gebruiken als boor CNC-continue orthogonale freeskop (A: +-120° / C: +-180°) CNC indexeerfreeskop (2,5°) Hodsxpgf Nepfx Aacsnu gereedschapswisselaar voor het automatisch wisselen van twee freeskoppen koeling door spindel gereedschapswisselaar met 60 posities spaantransportband Siemens aandrijvingen en motoren Heidenhain regel- en meetlinialen gewicht van de machine: 60 ton afmetingen van de machine: 19 meter x 12 meter x 6,65 meter TIRT3025 CNC draaitafel continu: - max. 60 ton werkstukgewicht - afmetingen: 3000 x 2500 mm - slag of draaitafel: 2500 mm - max 2 toeren per minuut - gewicht van de tafel: 37 ton - afmetingen: 6500 x 2500 x 1500 mm T-sleuftafels 7600 x 5282 mm - gewicht van de tafels: 50 ton Fresatrice a montante mobile - Freesmachine met mobiele kolom - Fraiseuse-aleseuse avec montant mobile - Fräs-Bohrmaschine mit beweglichem Ständer Longitudinal travel X-axe: 12 000 mm Crosstravel Y -axe: 1250 mm (ram-travel) Travel Z-axe (Height): 3500 mm Power on spindle: 37 kW Admission in millingheadspindle (ISO): ISO 50 Max quill travel Z': 1250 + 650 mm Max speedrange: 6 > 2000 rpm

Condition: ready for operation (used), controller manufacturer: Bosch CNC, empty load weight: 8,000 kg, total height: 2,820 mm, Retrofit 1991 Besturing: Bosch CC100M 3 assen max kraandiameter: 36 mm zie C05 1145 Longitudinal travel X-axe: 3340 mm Cross travel Y-axe: 915 mm Hnjdpfx Aasxpgk Seceu Travel Z-axe: 810 mm Max height workpiece: 810 mm Type of millinghead: drilling Type Admission in millinghead (ISO): ISO 4 Universal (2x360°): * Max quill travel Z': 305 mm Max speedrange: 79 -- 925 rpm Power needed (KVA): 5,5 hp

Condition: ready for operation (used), total height: 3,850 mm, total width: 4,190 mm, total length: 11,300 mm, controller manufacturer: Heidenhain, empty load weight: 22,000 kg, CNC indexeerfreeskop (2,5°) spaantransporteur inbegrepen Optioneel: machine kan worden uitgerust met nieuwe Heidenhain 320-besturing Hjdpfx Aexpgfvoacenu Longitudinal travel X-axe: 6500 mm Crosstravel Y -axe: 1600 mm Travel Z-axe (Height): 900 mm Dimensions clamping space - table: 8000 x 800 mm Power on spindle: 22/26 kW Admission in millingheadspindle (ISO): ISO 50 Max speedrange: 20 > 3000 rpm

Condition: ready for operation (used), controller manufacturer: Heidenhain TNC 426, empty load weight: 10,000 kg, total length: 5,200 mm, total width: 2,900 mm, total height: 2,760 mm, U22 internationale freeskop Longitudinal travel X-axe: 2000 mm Cross travel Y-axe: 800 mm Travel Z-axe: 800 mm Dimensions clamping space- table: 2000 x 700 mm Power on spindle: 22 kW Type of millinghead: U22 Admission in millinghead (ISO): ISO 50 Max speedrange: 20 > 4000 rpm Hnodpfx Ajxpggmsacju

Condition: ready for operation (used), total height: 2,120 mm, total width: 2,065 mm, total length: 8,210 mm, controller manufacturer: CNC-PC, empty load weight: 4,800 kg, nominal power: 23 kW (31.27 HP), 4 assen - geschikt voor alu/pvc/staal Cam-editor versie 3.63 / Drill versie 3.9 max. werkstukgrootte bewerkbaar op 1 zijde, vastgeklemd in standaard bankschroef met gereedschapslengte 35 mm + gereedschapshouderlengte 105 mm 240 x 170 x 7500 mm max. werkstukgrootte bewerkbaar op 3 vlakken, vastgeklemd in standaard bankschroef met gereedschapslengte 35 mm + gereedschapshouderlengte 105 mm 195 x 170 x 6300 mm tapcapaciteit: M10 handmatige positionering/lossen werkstukreferentiestop met N/C-positionering 8 pneumatische bankschroeven automatische bankschroefpositionering via X-as Longitudinal travel X-axe: 6300 mm Crosstravel Y -axe: 525 mm Travel Z-axe (Height): 335 mm Power on spindle: 5,5 kW Admission in millingheadspindle (ISO): HSK-40E Hnedpsxpgkfsfx Aacsu Max speedrange: 24 000 rpm ACCESSORIES & TOOLING: 8 + 1 tools

Condition: ready for operation (used), controller manufacturer: Siemens, Toolchanger: 40 positions Renewed Siemens control (1998) Including many tools spindledia: 100 mm distance spindle-column: 1250 mm Hjdexpgk Eopfx Aacenu distance spindlenose-table min/max: 150/950 mm max workpieceweight: 3000 kg clampingdimensions: 1600 x 800 mm 6 T-slots - width: 18 mm Longitudinal travel X-axe: 4850 mm Crosstravel Y -axe: 1100 mm Travel Z-axe (Height): 1200 mm Dimensions clamping space - table: 6000 x 1000 mm Max Height of workpiece: 1500 mm Power on spindle: 18 kW Admission in millingheadspindle (ISO): ISO 50 Max quill travel Z': 300 mm Max speedrange: 28 -> 2800 rpm

Condition: ready for operation (used), empty load weight: 12,500 kg, total length: 7,600 mm, total width: 2,800 mm, total height: 2,400 mm, Type FB 830 SD with digital readout Longitudinal travel X-axe: 3000 mm Cross travel Y-axe: 630 mm Hjdpfx Ajxpgibsaconu Travel Z-axe: 1000 mm Dimensions clamping space- table: 3600 x 800 mm Max height workpiece: 1000 mm Power on spindle: 15 HP Admission in millinghead (ISO): ISO 50 Max speedrange: 32 > 1600 rpm

Condition: ready for operation (used), controller manufacturer: Heidenhain, Type: 65-P10-CF Zware frees- en boormachine Longitudinale X-beweging van de kolom: 24 meter Kruis Z-verplaatsing of spindeldiameter: 254 mm - verplaatsing: 2133 mm incl. adapter ISO-60 naar ISO-50 incl. vele verschillende verlengstukken voor spindel- en freeskoppen Kruisbeweging van de kolom in W-richting: 1219 mm (kogelomloopspindel) Totale verticale slag: 3352 mm! Verticale Y-beweging van de kolom: 4572 mm Gewicht van machine + draaitafel: 200 ton 4 geharde geleiders Hedpjxpgf Aefx Aacjnu geïntegreerde smering Heidenhain CNC-besturing CNC-draaitafel continu: 4500 x 3500 mm Maximaal 60 ton op tafel Dwarsverplaatsing van de tafel: 2000 mm Oppervlakte t-groeftafels: 25.000 x 6.900 mm Gewicht van de T-sleuftafels: 180 ton Longitudinal travel X-axe: 24 000 mm Crosstravel Y -axe: 2133 mm Travel Z-axe (Height): 4572 mm Power on spindle: 85 HP / 65 kW Admission in millingheadspindle (ISO): ISO 60 (dia 254 mm) Max speedrange: 1,5 > 1200 rpm

Condition: ready for operation (used), controller manufacturer: Siemens, empty load weight: 55,000 kg, 2-koloms portaalfreesmachine tussen de kolommen: 2550 mm!! 5-assige freeskop koeling door spindel totaal vermogen: 90 kVa Longitudinal travel X-axe: 8000 mm Cross travel Y-axe: 2500 mm Hodjv Sfkajpfx Aacjnu Travel Z-axe: 800 mm Dimensions clamping space- table: 9000 x 2500 mm Max height workpiece: 1200 mm Power on spindle: 20 kW Power needed (KVA): 90 ACCESSORIES & TOOLING: toolchanger - 28 toolpositions

Condition: ready for operation (used), total height: 3,300 mm, total width: 3,450 mm, total length: 6,000 mm, controller manufacturer: Siemens, empty load weight: 17,000 kg, Model: FTV 850 Koeling door spindel Het werkgebied kan in twee secties worden verdeeld 2 magnetische tafels Bewegende kolom, vergelijkbaar met Mazak VTC / Unisign / Hedelius Zware chassisstructuur Longitudinal travel X-axe: 1800 mm Crosstravel Y -axe: 850 mm Hsdpfx Aewxz D Ujacsnu Travel Z-axe (Height): 800 mm Dimensions clamping space - table: 2300 x 900 mm Universal (2x 360°): ISO 50 Boring head (1 x90°): 19 kW