BTS-Drum Crusher auto, barrels
BTS-Fasspresse AUTO Drum Crusher AUTO

Year of construction

2026

Condition

Ex-display machine

Location

Brakel

BTS-Drum Crusher auto, barrels BTS-Fasspresse AUTO Drum Crusher AUTO

Machine data

Machine type:: BTS-Drum Crusher auto, barrels

Model:: BTS-Fasspresse AUTO Drum Crusher AUTO

Year of construction:: 2026

Condition:: as good as new (ex-display)

Price & Location

Location:: Bökerhof 3, 33034 Brakel, Deutschland

Call

Details about the offer

Listing ID:: A3059888

Update:: 25.02.2026

Description

The BTS-Drum Crusher AUTO is ideal for compacting 30 to 220 Ltr drums / barrels, but also plastic and cardboard drums can be easily reduced to their minimum of volume. In many cases this compacted material can then even be marketed again. The drum press impresses with its ease of use, safe operation and high throughput quality.
By crushing these valuable and recyclable materials you achieve a volume reduction of up to 90%, a significant saving on your disposal costs and you properly return the material back into the recycling cycle.

Pressing force: 24 Ton
Machine size: 2587 H x 1190 W x 1000 D mm
Machine weight: 690 kg
Transport height: 1800 mm
Compaction rate: 8:1
Cycle times: 40 seconds
Motor: 11 kW 32 Amp
Power supply: 380 - 400 V (3 phase)
Noise level: 68 dB

AUTO compaction cycles
Iisdsc Spguspfx Aa Iec
Compaction head with spikes to punch the drum to drain out any residual liquids
Maximum safety standards by totally enclosed chamber
30 Ltr. collection tray with tap connection
Useable for 30 to 220 Ltr. steel drums, plastic drums and cardboard drums
A quality product “Made in Europe”

Suitable for compacting
Steel drums
Plastic drums
Cardboard drums
Fiber and paper drums

Optional extras
Machine colour RAL
Can and filter crush insert
Multi head to compact inside a 200 Ltr steel drum

Drum Crusher, Drum Press, Drum Compactor, Barrel Crusher, Barrel Press, Barrel Compactor

Documents

3059888-01.pdf
3059888-02.pdf

Seller

Registered since: 2008

44 listings online

Call

Send inquiry

Telephone & Fax

+49 5276 ... show

+49 5271 ... show

Fax:

These listings may also fit your interest.

Listing

Germany

1,293 km

Bandsaw mobile
HBMHBM 125

Call

Condition: new, capacity 90 degrees: round 125 mm capacity 90 degrees: square 125 mm 127 x 125 mm dimensions of saw-band 1435 x 12,7 x 0,65 mm band speed 38 - 80 m/min Iiodpfjupw R Nox Aa Iec total power requirement 0,95 kW weight of the machine ca. 18 kg dimensions 720 x 380 x 450 m Both straight and miter cuts can be made at angles between 45 and 90 degrees. With the metal band saw you not only work precisely, but also quickly: the band speed can be variably adjusted between 38 and 80 meters per minute. With a weight of only 25 kilograms, the saw can be used mobile.

See details

Listing

CNC cylindrical grinding machine - Universal M. + M. Mai GmbH MBF 453U

Großbettlingen

1,337 km

CNC cylindrical grinding machine - Universal
M. + M. Mai GmbHMBF 453U

Call

Condition: new, Year of construction: 2024, functionality: fully functional, Universal CNC cylindrical grinding machine for high-precision internal & external cylindrical grinding MBF 453U from the MaiBase platform The machine is a completely new development with strong dimensions in a small space! Technical data: Center width: 430 mm Standard center height: 200 mm Grinding length: 400 mm Grinding wheel diameter: 500 mm Z-axis adjustment path: 550 mm X-axis travel: 385 mm Dimensions and weight: 2200 x 2500 x 2400 mm // 6500 kg Iiedpfx Astrf Smea Ioc Equipment of the machine: - FANUC Oi-F Plus control system - Grinding headstock (swiveling) with 15kW motor spindle - Workpiece headstock MK5 - Tailstock MK3 with 20 mm stroke (optional 60 mm / 120 mm) - Handwheel for manual axis movement - Z-axis - X-axis - C-axis - B-axis - Glass scales for X- and Z-axis - Internal grinding spindle FISCHER UJ80 - Internal grinding spindle (GMN motor spindle) optional - Dressing spindle attached to the workpiece headstock for rotary dressing - Automatic door drive

See details

Listing

Metal separator for all metals ALREC-TEC GmbH METALL-KICKER 400

Mömbris

1,250 km

Metal separator for all metals
ALREC-TEC GmbHMETALL-KICKER 400

Call

Condition: as good as new (ex-display), Year of construction: 2025, operating hours: 500 h, functionality: fully functional, machine/vehicle number: 25-029, total width: 800 mm, total length: 4,700 mm, total height: 1,900 mm, type of input current: three-phase, energy consumption: 2 kWh, Very good metal separator (inductive sorter) for separation of all kinds of metal (incl. stainless steel). Can be used before ECS, behind or stand alone. Ejecting of all metals larger 0.5 / 1 mm possible. Reasonable using for material up to 60 % metal content. Unique flap technology, no pressured air necessary. Machine is ready for using, can be visited or tested. If wished can be equipped with camera. If the machine is too small we can build also bigger. It is our demonstration machine. Isdsqabm Ejpfx Aa Isic Throughput / capacity depending on material and purpose. Price on negotiation!

See details

Listing

Vertical turret lathe DMG MORI CTX Beta 800 TC

Czech Republic

1,781 km

Vertical turret lathe
DMG MORICTX Beta 800 TC

Call

Condition: good (used), Year of construction: 2017, functionality: fully functional, Description: The machine is in good technical condition, and a test run is possible by prior arrangement. Equipped with Siemens Shopturn system, including a bar feeder, and supplied in full configuration. BASIC PARAMETERS Max. turning diameter in working area: approx. 410–500 mm Max. length: 800 mm Distance between spindles: approx. 1020 mm Swing over bed: approx. 700 mm Practical application: ideal for shafts, flanges, and housings up to approx. 800 mm Travels (axes) X: approx. 480 mm Y: approx. 100 mm Z: approx. 800–845 mm B axis: approx. 110° (5-axis machining) C axis: 360° (indexing + interpolation) These features make it a true turn-mill center (not a conventional lathe) Spindles Main spindle speed: approx. 5000 rpm Power: approx. 25–34 kW Through bore: approx. 76–87 mm Sub-spindle speed: approx. 6000 rpm Milling spindle (main difference compared to a standard lathe) Speed: up to 12,000 – 20,000 rpm Iiedpfx Asy Rgafea Isc Power: approx. 19–22 kW Taper: HSK-A63 or Capto C6 Capabilities: milling, drilling, tapping, 5-axis simultaneous operations Tool System Magazine: 24–48 tools Live tools: yes (fully integrated) Control system: Siemens 840D sl + CELOS (most common) Weight and dimensions Weight: approx. 10,000 kg Dimensions: approx. 6.5 × 2.7 × 2.0 m

See details

Listing

Gantry crane Sky Hall Crane Demag - Portalkran KBK 125KG Kettenzug KBK 1 KBK1 12x3,5m NL 125Kg + Zubehör

Gondelsheim

1,269 km

Gantry crane Sky Hall Crane
Demag - Portalkran KBK 125KG KettenzugKBK 1 KBK1 12x3,5m NL 125Kg + Zubehör

€2,150

ONO plus VAT

Call

Year of construction: 2012, condition: excellent (used), machine/vehicle number: MBHF-KBK1, DEMAG KBK crane sky crane track dimensions approx. 12m x 3.5m Please inquire about other dimensions! Payload / lifting load 125 KG - 0.125ton Technical data of the system: Crane track made from Demag KBK1 rails The system is delivered complete: KBK rails, rail connectors, chassis, end plates, cable drag, power supply, holders/suspenders etc. including 1 bridge with 125KG Demag DC-COM chain hoist Crane is dismantled and available immediately Very good used condition, see pictures Item location is 75053 Gondelsheim Shipping by courier or collection only by appointment Demag KBK1 KBK2 and KBK3 rails are stock items! Iiodpfx Ajpiarnsa Iec Other KBK systems are also available. Payload 125KG - 1600KG Please ask for your crane runway with cantilever capacity and dimensions.

See details

Listing

Universal Milling Machine OPTIMUM OPTImill MT 100

Feucht

1,419 km

Universal Milling Machine
OPTIMUMOPTImill MT 100

Call

Condition: used, Universal tool milling machine Iedpfew Rlvqex Aa Ioic Brand: OPTIMUM Model: MT 100 Year of manufacture: 2018 – workshop tested Machine no.: J33021808035 Geometric acceptance with test report Accessories: - 3-axis digital display DPA 2000 - Vertical milling head SK 40 with drawbar thread M 16 - Fixed table 1,120 x 260 mm (T-slot: 14 mm) - Machine lamp - Coolant system - Manual central lubrication - Operating manual Used as seen, without warranty The machine technically corresponds to the state of the art at the time of manufacture.

See details

Listing

Laser cutting machine TRUMPF Trulaser 3030 L20 CO2

Slovakia

1,853 km

Laser cutting machine
TRUMPFTrulaser 3030 L20 CO2

Call

Condition: excellent (used), functionality: fully functional, Year of construction: 2012, operating hours: 55,771 h, laser hours: 35,157 h, laser power: 3,200 W, sheet thickness (max.): 20 mm, sheet thickness steel (max.): 20 mm, sheet thickness aluminum (max.): 8 mm, table length: 3,000 mm, table width: 1,500 mm, travel distance X-axis: 3,000 mm, travel distance Y-axis: 1,500 mm, travel distance Z-axis: 150 mm, positioning speed: 140 m/min, positioning accuracy: 0.02 mm, year of last overhaul: 2024, feed length X-axis: 3,000 mm, feed length Y-axis: 1,500 mm, feed length Z-axis: 150 mm, Equipment: cooling unit, documentation/manual, safety light barrier, The laser is in operation, can be inspected and tested. Regularly serviced in good technical condition. Mirrors completely replaced in 2024. Iodjv Hxbbjpfx Aa Ijic

See details

Listing

Zeiss Accura II 12/18/10 ZEISS Accura II 12/18/10

Rovadino

1,608 km

Zeiss Accura II 12/18/10
ZEISSAccura II 12/18/10

Call

Condition: excellent (used), Year of construction: 2011, functionality: fully functional, measuring range X-axis: 1,200 mm, measuring range Y-axis: 1,800 mm, measuring range Z-axis: 1,000 mm, ZEISS ACCURA measuring machine 12/10/10 automatic Measuring range: 1200x1800x1000 Head: ZEISS RDS CAA Sensor: ZEISS VAST XXT - TL3 Probe changer: 3 stations Controller: ZEISS C99 Software: Calypso 2011 Iiodpfx Ajxq R R Eea Isc Year of manufacture: 2011 Warranty: to be agreed Description: machine in perfect working order and excellent cosmetic condition

See details

Listing