Press

Kallesoe LV5019 + KL20

Condition: used, Year of construction: 2001, Wood dimensions to be processed: Input lengths min/max 500 - 6500 mm Full optimization up to max. 1500 mm Input widths min/max 40 - 300 mm Input thicknesses min/max 15 - 120 mm Wood cross-sections max. 300 x 40 mm max. 200 x 120 mm Fixed lengths after sawing min. 510 - 2800 mm Special application: Cutting blocks, length min/max. 100 - 200 mm (Caution: Multiple block lengths at the sorting line; blocks are transported to the end of the sorting line and fall into the customer's grid box). Cutting/cutting tolerance +/- 0.8 - 1.5 mm (for wood types with minimal resin content and an even surface. Tolerance up to 1 m fixed length, max. tolerance for longer pieces up to 2.5 m). Thickness tolerance +/- 3 mm. Curvature of the wood in all directions: max. 10 mm per meter in length. Wood types: soft or hardwood. System performance: Feed speed, continuously adjustable up to max. 230 m/cutting cycle 0.6 - 1. To obtain the practical output per day, an effectiveness factor dependent on the customer's production conditions must be calculated. Infeed and saw height: 900 mm (placed on customer's platform, saw requires concrete base). Sorting working height. 2000 mm Connection values: Total electrical connection value approx. 18 kW Operating voltage 380 Volt / 50 Hz Voltage fluctuations max. 5% Air consumption approx. 1200 NL/operating pressure approx. 8 bar Extraction speed approx. 30 m/nd Color pebble gray RAL 7032 and blue NCS 5030-R 80 B POSITION OVERVIEW: Item 1 Infeed and marking station with 1 side support table, adjustable 1 table as stop edge Item 2 Support roller without drive, front side in front of sheet metal table for easier feeding Item 3 Length measuring station with built-in fluorescence camera for detecting error markings Item 4 Automatic width measurement, contactless Item 5 OptiCut 304 optimizing cross-cut saw - right-hand version with built-in waste chute including equipment package for large wood cross-sections Graphic input terminal (16 x 40 characters, Numeric keypad) with software package for optimization and system control. Available for processing: - max. 16 product groups - max. 8 grades per product group - max. 200 fixed lengths per product group Item 6: Outfeed conveyor as sorting station with drive unit, length 7500 m Item 7: 2 ejectors mounted on the outfeed conveyor Bedjw Sy T Hepfx Aa Uecw Storage location: Nattheim

Condition: excellent (used), Independent machine (standing alone) and/or Universal machine (First & Second in a line) Electronic Programmer EasyLing Safety and sound-proof enclosure No. 3+3 Vertical columns to support the working units Min. useful working width (mm) 240 Max. useful working width (mm) 3100 Min. useful working tickness (mm) 3 Max. useful working tickness (mm) 150 Bedpfewhmdfox Aa Uocw Distance between center-axes of the disappearing dogs (mm) 800 Adjustable (min/max) feeding speed (m/min) 4 - 24 Total installed power No. 4 Working groups (for each machine's side): Scoring Unit Jumping Scoring Unit 1 x Kw 3 (RPM 6000) Hogging Unit 1 x Kw 6 (RPM 6000) 0-10° Jumping Milling Unit 1 x Kw 6 (RPM 6000) 0°-90° Milling-Shaping unit 1 x Kw 6 (RPM 6000) 0°-90°

Condition: new, capacity 90 degrees: round 350 mm capacity 90 degrees: square 330 mm 500 x 310 band speed 15 - 100 m/min table height 844 mm dimensions of saw-band 4250 x 34 x 1,1 mm total power requirement 2,2 kW weight of the machine ca. 1,2 t dimensions of the machine ca. 1,4 x 2,4 x 1,935 m ACTION PRICE!!! 2-column double miter band saw K-tech DG 50/33 HA-I • 2-column miter saw • Solid, yet easy to use • Material height sensor (automatic cut start detection) • Smooth running thanks to bevel cut, feed controller + cutting pressure controller • Massive material infeed roller • Removable chip tray (disinfection) • Energy-saving and low-vibration thanks to bevel cut • Ergonomic, safe and free-standing control panel • Frequency-controlled saw drive 15 -100 m/min. • Hydraulic cutting pressure control valve • Hydraulic control of saw frame and vice • LEDs for monitoring all safety functions • Large dimensioned wheels (520 mm) a. Bcedpfx Aofg E Hlsa Uow • Clear miter setting up to 60° Semi-automatic function: 1. Clamp material 2. Saw starts 3. Rapid lowering to the start of the material or the same for series cutting cut 4. Saw band off 5. Raise the frame to just above the material 6. Open the vise

Condition: like new (used), Year of construction: 2022, operating hours: 500 h, functionality: fully functional, Drying paternoster for finger-jointed boards Bcedpfx Aowclkyea Uew Consisting of: - Transfer chain to finger-jointing press (foldable) - Drying paternoster (approx. 7 m, board length up to 6 m) - Cutting and zero-cutting saw - Conveyor belt for waste wood disposal - Stacking machine - Strip magazine not for sale - Package cross conveyor The machine is in very good condition and has had very little use. The machine is still assembled but available immediately.

Condition: excellent (used), UNLOADER (SINGLE-CAGE) - Vacuum system with its pump - Top holding bar deplacement (pivoting) of 180° - Horizontal-longitudinal bars (rocker arms) for the vacuum cups supporting - In-side lifting table, surface with motorized-rollers - Front-side sliding door (or metal grid) to out-feed the stack of the panels - Separated electric and command panel - Out-side rollers way (on ground) to out-feed pile of panels from the Unloader - Out-side motorized rollers table (which brings panels to the Unloader), with also cross motorized conveyor belts (at 90°) - Working capacity (cycles/min): 12-15 - Min/Max panels thickness mm 10 - 40 - Min dimensions of the panels mm 250 x 320 (estimated) Bcedpfx Aascggy Sj Uew - Max dimensions of the panels mm 1200 x 3000 - Total installed motor power KW 10

Condition: good (used), Year of construction: 1990, RANDEK SP700 cut saw manufacture Randek Sweden Year 1990 in good condition Randek’s SP700 series provides reliable cut saws that are a major asset to roof truss and house producers around the world. The SP700 cut saw is effective, easy-to-use and accurate. It has been on the market for a long time and is continuously improved in close contact with our many customers. The blade on this semi-automatic saw supports angled cuts, which mean it can make any cuts you may require. You can also use the large diameter blade (700mm ) to cut several sections of stacked timber Bjdpfoh Ayyqjx Aa Uocw simultaneously. • Angled cuts from 0° to 360° • Cut heights up to 250 mm, possible to cut three boards each cutting cycle • PLC programmable saw • Fixation of timber near the cutting area resulting in accurate cutting roller conveyor system with 5 adjusteable pneumatic stoppers . Lenght 6,25m outfeeding roller conveyor 4,10m Complete line: 11,5m technical inforamtion under subjet of correction

Condition: used, Year of construction: 1993, Häwa debarking milling machine H249 / 1000 Year of manufacture: 1993 Log diameter: 0.25 m - 1.2 m Log length: 1.8 m - 7 m Bjdpfxjx Rv T Is Aa Uocw Milling head: 30 kW Root reducer: 37 kW Consists of: - Cross infeed conveyor - Debarking - Conveyor belts - Outfeed conveyor

Condition: good (used), Year of construction: 2011, Fuji Flow Wrapper High speed horizontal form- fill - seal machine Type: FW3410/B Year of construction: 2011 Bcjdpfx Aasv T D D Us Uow Zodiac HC terminal printer 200 V, 3 Ph, 50/60 Hz, 30 A Belt width: 250 mm, seal length: 300 mm Dimensions: 3360 mm x 1200 mm x 1900 mm.

Condition: good (used), The debarker is great for debarking hardwood as well as softwood. Carriage made of heavy steel construction 5 pairs of drive wheels Milling arm made of heavy steel construction Hydraulic milling head 22 kW motor Bcedpfx Aastuyr Ie Usw Log feeder shown in the picture is not part of the ad and is available for an extra charge of 25,000 PLN / 5,500 EUR

Condition: good (used), Year of construction: 2000, For Sale: AXYZ 4010 CNC Router (Year 2000) – Made in Canada, Reliable & Versatile We are offering a pre-owned AXYZ 4010 CNC Router, manufactured in Canada, from the year 2000. Known for its durability, precision, and versatility, this CNC router is ideal for various cutting, engraving, and milling applications. It has been well-maintained and remains in good working condition, making it a cost-effective choice for businesses looking to enhance their machining capabilities. Specifications & Features: Work Area: 1220mm x 2540mm (48" x 100") Table: vacuum table Spindle Type: 2x High-speed router spindle Control System: AXYZ proprietary CNC control Drive System: Stepper motor-driven for precision movement Material Compatibility: Suitable for cutting wood, plastics, aluminum, composite materials, and more Software Compatibility: Works with standard CAD/CAM software Manufactured In: Canada Condition: Used, in good working order Key Benefits: Canadian Quality: Built to high manufacturing standards for reliability and longevity. Precision & Efficiency: Capable of intricate cuts and engravings with high accuracy. Bsdovzaguepfx Aa Uecw Versatile Applications: Ideal for signage, woodworking, prototyping, and light metalwork. Cost-Effective Investment: A budget-friendly alternative to purchasing a new CNC router. This AXYZ 4010 CNC Router is an excellent addition for workshops, sign-making businesses, and fabrication shops seeking a dependable machine at an affordable price.