Bale press

HSM HL 7009 2017

Condition: not inspected (used), Year of construction: 1985, functionality: fully functional, pressing force: 50 t, bale length: 1,000 mm, bale width: 750 mm, bale height: 750,750,750 mm, bale weight: 500 kg, input voltage: 400 V, overall weight: 7,500 kg, oil tank capacity: 500 l, power: 30 kW (40.79 HP), empty load weight: 7,500 kg, input frequency: 50 Hz, Manufacturer: Paal Typ: Pacomat V Year of construction: 1985 Press power main press: 50 t Specific press capacity: 5 kg/cm² Feed channel: 1.000 x 720mm (l x w) Bdsdpfxjic Rl Ds Abfji Theoretic throughput rate: 200 cbm/h Bale size: 700 x 1.000 mm (w x h) length adjustable Driving motor: 30 kW Bale weight: approx. 500 kg Machine weight: approx. 8000kg The hydraulic unit is functional, the drive motor is in the removed state.

Condition: ready for operation (used), HSM V-Press 860 baler, year 2008–2009, price: €5,800 Pressing force: 54 kN Specific pressing force: 63.46 N/cm² Drive power: 7.5 kW Cycle time: 25 s Loading height: 1,110 mm Feed opening width x height: 1,195 x 650 mm Bale dimensions (L x W x H): 1,200 x 780 x 1,200 mm Bale weight: 480 kg Machine dimensions (W x D x H): 1,797 x 1,247 x 2,985 mm Machine weight: 2,008 kg Binding material: wire Materials processed: foil, mixed paper, cardboard, die-cut waste, textiles, Big Bags, polystyrene HSM V-Press 860 plus, year 2013–2015, price: €8,000 HSM V-Press 860 L, year 2015, price: €9,000 HSM V-Press 860 plus, year 2019, price: €9,000 HSM V-Press 860 plus, year 2024, price: €10,000 HSM V-Press 860, new/ex-demo, year 2020, price: €13,000 4-fold bale wire tying Bale dimensions (L x W x H, mm): 1,200 x 800 x 1,000–1,200 Bale weight: approx. 500 kg Technical data (L x W x H, mm): 1,213 x 1,824 x 2,987 Feed opening (mm): 1,200 x 565 Cycle (s): 35 Pressing force (t): 54 Power supply (V): 400 (three-phase) HSM V-Press 860 plus B, year 2020, price: €14,000 Bdedpfx Abora Rbgefsi Pressing force: 594 kN Voltage/Frequency: 400 V/50 Hz Drive power: 4 kW Feed opening width x height: 1,500 x 651 mm Bale dimensions (L x W x H): 1,500 x 780 x 1,200 mm Bale weight: 550 kg Feeding type: Manual Machine dimensions (W x D x H): 2,099 x 1,245 x 2,985 mm Machine weight: 2,336 kg Binding material: wire Material processed: foil, cardboard Idle cycle time: 25 s

Condition: new, Year of construction: 2023, machine/vehicle number: 7YXXX, VIS G is the ideal and the most efficent solution for serap processing like stampings, trimmings, wires mostly recommended for the automotive industry, metal recyclers and non-ferrous metal remelting industry. Bdsdpfx Asmqi Akebfji

Condition: new, Year of construction: 2026, functionality: fully functional, power: 80 kW (108.77 HP), number of axes: 2, overall weight: 172 kg, table length: 900 mm, table width: 600 mm, Equipment: documentation/manual, A mid-sized CNC laser machine designed to work continuously for small, medium, or large production. This model features a lifting table, giving you additional product options. A Wattsan laser cutter will be an essential assistant for your business. Effective and fast. Wattsan 6090 LT can cut up to 10–13 mm and engrave wood, cardboard, acrylic, glass, rubber, stone, wool, etc. The lifting table function allows lowering the working area up to 16 mm, so the rotary device may be installed to diversify your production. It also has a waste collection container that will make the work much more pleasing. You can give our managers a call for additional details! Wattsan 6090 LT characteristics Working area: 600x900 mm Laser power: 90-100 W Working table lowering depth: 160 mm Positioning precision: 0,03 mm Bjdpfx Ajiim Unsbfsdi Machine size: 1030 x 1490 x 670 mm + if it is on wheels 315 mm Packing size: 1110 x 1580 x 755 mm Weight: 230 kg Virmer provides not only prime machines but also service and delivery. Our engineers and managers are ready to answer all of your questions and provide video assistance if required. Also, owners of Wattsan equipment get lifetime online support. Virmer is located in the Netherlands and works all over Europe. Virmer is Wattsan's official supplier. We provide not only laser engravers, but also metal cutters, welders, markers and cleaning machines. Wattsan is a Chinese manufacturer, which has been creating laser equipment for almost 15 years and keeps evolving with the help of its clients. Thanks to feedback Wattsan made over 50 modernizations, which made machines more reliable, precise and powerful so you could upgrade your business up to the new level. YOU CAN WRITE OR CALL US! WE WILL SELECT THE RIGHT MACHINE FOR YOUR TASK On our company you can find a wide range of machines and components: Laser Metal Cutting Machine; Laser Metal Machine, Fiber Metal Laser, Fiber Metal Laser Engraver; CNC laser machine for metal; Laser machine for wood; CNC laser machine; Laser engraving machine; Laser engraver; Laser cutting machine for plywood; Laser engraver; Laser cutting machine for metal; CNC milling machine; laser marker. Lenses; Chillers; Cooling system for machine; Chiller S&A ; IPG laser, MAX photonics, Raycus; Compressor; Rotary device; Mirror for laser machine.

Condition: repair required (used), Year of construction: 2003, operating hours: 12,500 h, functionality: not functional, Hammel VB 850 E stationary with magnet + 2 pairs of new shafts Machine is without gearbox. Bedpoyt Iawofx Abfsdi

Condition: new, The unit is NEW, complete with controls, diesel tank, exhaust and batteries. Net price: € 39980 Gross price € 47576.12 Technical specifications Bjdpfxsnkcaas Abfsdi Engine : Doosan & P126TI-II, 6 cylinder, water-cooled, turbocharged Generator: Newpower NW/N 330 Continuous power: 240 kW / 300 kVA Maximum power: 264 kW / 330 kVA Control system: Deep Sea DSE 7320 Connection: direct connection (Optional circuit breakers, outlets, automatic transfer switch.) Frequency : 50 Hz & 3-phase Voltage: 400/230V RPM : 1500 rpm. Dimensions (LxWxH): 3960x 1356x2167mm Weight: 3200 kg Network monitoring, soundproof Shipment: - Worldwide transport is available at an additional cost - In order to be able to quote an exact freight price, please send us a request with your data and your complete address

Condition: new, Year of construction: 2025, Units available in stock! Specifications: Throughput:Up to 5m3/h, ~700kg/h* Hopper: 0,57m3 Main motor: 22.5kW Hidraulics: 1.1kW Blades:38 units Blade size: 35x35mm Length: 2100mm Width: 1500mm Height: 1600mm Weight: 1700kg Screen: D8~D40 Output hole: D200 Warranty: 2 years / 1000 workhours Single rotor shredders are some of the most universal chipping platforms out there. Best known for shredding various types of wood (Briquettes, hardwood, softwood, lumber), the platform can easily be adapted to numerous other substances such as rubbers, plastics, paper, light metals and general waste (Even including medical!). Your needs are our commands. When implemented by woodworking companies into their current lineup this machine can turn woodworking and furniture making waste into briquetteable mass which is easier to store, transport and sell. Our single shaft shredders provides you with features found in much more powerful and expensive shredding units while keeping the price down to earth. A couple of them: Bjdpfjtmup Uox Abfjdi The horizontal hydraulic ram: Assists the rotor by pushing the material to provide maximum working area efficiency. Is controlled by an algorithm to ensure safety and efficiency Gimbal-mounted hydraulics provide a high lifetime Ladder frame chassis and enclosed hydraulics to dampen noise, vibrations and increase safety Drivetrain The drivetrain is protected against hits from foreign objects by using a tripple-disengagement system which is easily resettable and serviceable. Offset placement of the rotor bearings keeps them away from dust and heat buildup. Rotor The centrepiece of the rotor is milled from a single block of high-grade steel. In case of severe damage to the rotor or its shafts, the latter can be replaced without the need to replace the whole unit – costs saved for the user! Blade holders are replaceable – unlike welded-in options, our rotor does not need to be replaced if the blade holders get damaged. 4-sided rotatable blades – a single blade will last you 4 times as long. Our fixed blades can be adjusted to compensate for the increased tolerances once the blades start wearing out – longer runtime with a single set of blades. Output Output and size is controlled by an interchangeable screen which is adapted based on the material used. The shredded material is removed using mechanical, or pneumatic conveyors. Affordable pricing, proven reliability, easy maintenance, quick service and parts delivery & a warranty – these are just a couple of reasons why choose us.

Condition: like new (used), Year of construction: 2016, overall weight: 8,200 kg, fuel type: electric, color: white, Type HX426 Blade diameter (mm) 650 Bjdpfxeqmi Irj Abfodi Number of hammers (pcs) 30 Inlet size (mm) 1250 x 250 Screen mesh size (millimeter) 80 Length of chips (mm) 50 -80 Capacity (t / h) 8- 10 Main power (kW) 132 Feeder motor (kw) 7.5 +5.5 Discharge motor (kw) 5.5 +5.5 Oil pump motor (kw) 1.5 Length of conveyor (mm) 4000 Conveyor length (mm) 10000 Weight (t) 8.2 Note: capacity depends on the physical characteristics of the raw material, feeding method, feeding speed and production volume.

Condition: ready for operation (used), Year of construction: 2012, functionality: fully functional, total height: 3,400 mm, total width: 2,400 mm, total length: 3,900 mm, overall weight: 6,000 kg, input voltage: 380 V, power: 80 kW (108.77 HP), rotary shear 2 shafts - 2 motors 15kw and 12kw - inversion in case of jam - shredding chamber 1100 x 900 - thickness of new knives 30 - 4 tons - large loading hopper - possibility of loading Bdsdpfx Abjh Diwusfei very versatile and very powerful, can pre-grind organic matter for methanizers, copper cables, lumps, plaster, BA13, D3E, plastics, wood, bumpers, bottles, metals, hollow bodies, etc. use to grind up sick calves at the renderer.

Condition: ready for operation (used), Drum chipper type Bruks type 1202 CS6 for production of high quality pulp chips from bulky mixed waste such as: Edgings, slabs, trim ends, plywood, veneer and joinery waste and log tops. The chipper can produce pulp and board chips, or fuel chips. Capacity up to 50 m3 chips per hour Bdsdpjuhvhpsfx Abfei With bigger electrical motor up to 100 m3 of chips per hour Electrical motor 75 kW