Panel saw STRIEBIG COMPACT TRK 5207 C -used-

STRIEBIG COMPACT TRK 5207 C

Condition: used, Year of construction: 2025, operating hours: 2 h, Operating hours: 2 New tractor with dealer daily registration prior to delivery Standard equipment / technical data Engine Rated power (ISO): 82 / 110 kW/hp at 2200 rpm Maximum power: 86 / 115 kW/hp at 2000 rpm Maximum torque: 460 Nm at 1600 rpm Manufacturer / Type: Agco Power / AP 44MBTN-D5 Low-emission engine, 4-cylinder / 4.4 l, 4 valves, STAGE 5 Regulated turbocharger, SCR catalytic converter DOC – Diesel oxidation catalyst SC soot particle filter One-piece, tiltable engine hood Exhaust on right side, in front of cab Fuel tank capacity: 198 liters / AdBlue: 18 liters Transmission / PTO 16/16-Speed Dyna-4, SpeedMatching, 40 km/h PowerControl left-hand operation with powershift reverser, 4-step powershift Dcsdsyvmq Ijpfx Ag Djf Permanently cooled wet multi-plate clutches with independent lubrication system Dual-speed PTO: 540 / 540E / 1000 rpm Electronic shift in cab PTO START/STOP button on left rear fender Hydraulics / Rear linkage Open Center system, 58 l/min total flow, max. 200 bar 2 control valves with hydraulic couplers: 1x single/double-acting, pressure relief + 1x single/double-acting, neutral leak, SST Category 3 quick coupler with balls and catcher bowls CAT 3/2 Lower link draft control 5,200 daN maximum lift force, 2 external lift cylinders Adjustable lift rods on both sides and 2 side stabilizers EHR with external operation on both rear fenders Electrical equipment Thermostart, 120 A alternator Electric battery isolation switch 12 Volt power supply for external devices with socket Axles / Additional weights Rear axle ND with flange hub Oil-cooled disc brakes Height-adjustable automatic drawbar Rear fender outer width 2.00 m, without extensions Front weight carrier with integrated drawbar and towing pin Driver's station Standard cab with vibration damping, standard roof, ventilation and heating, air conditioning Integrated safety frame with tinted glass Doors on both sides with safety steps Adjustable steering column (height & tilt) Air-suspended driver's seat with armrests, swivel adapter, and seat belt 2 large telescopic exterior and wide-angle mirrors Interior mirror Analog-digital dashboard (SIS) Radio pre-wiring with antenna and speakers 4 work lights each at the front and rear of the cab roof 2 headlamps each in the engine hood and on the handrails, 2 work lights on rear fenders Rear window washer/wiper All-wheel front axle with selectable differential lock Special equipment With fuel tank protection PowerControl & brake to neutral (clutch effect) 100 l/min Open Center hydraulic system oil flow sharing (58+42 l/min) Leak oil collector at quick couplers 3 control valves: 1x pressure relief, double-acting, float, SST + 1x double-acting, neutral leak, SST + 1x double-acting, neutral leak, SST + free return 2.5 t front linkage, 1 hydraulic hose set, electrical socket 480/70R38 ADJ Ø1.69m & 380/70R28 ADJ Wide rear fender extensions Air conditioning Cab with mechanical suspension Telescopic exterior and wide-angle mirrors Passenger/instructor seat with belt Air-suspended driver's seat, automatic setting with seat belt, swivel adapter, and armrests Rear window washer/wiper Automatic battery isolation switch, 12

Condition: new, Year of construction: 2026, Engine power 5HP Blade diameter 250mm Blade revolutions per (min) 5300 Automatic pneumatic movable table Galvanized iron and polyzene supports √ Maximum horizontal cutting length 4200mm Maximum vertical cutting height 2200mm Dodpfx Ageu Rqq He Decf Maximum horizontal cutting height 2080mm Maximum cutting depth 60mm

Condition: used, Year of construction: 1990, No. 04502 Veneer press Ott JU 2511/70 Used, year of construction 1990 Electro-hydraulic, approx. 15 kW Aluminum heating plates 2550 x 1100 mm LW Heating electric 4 hydraulic cylinders each 80 mm diameter Total pressing pressure 70 tons Specific pressing pressure 2.5 - 3.5 kg/cm2 Opening width 400 mm Button control for opening - closing - stop Pressure monitoring with automatic readjustment Adjustable limit switch for specific opening width HAWE pump Safety rip cord Incl. electric cable and plug 32 A Incl. electric plans, operating instructions as .pdf file Transport dimensions approx. 2900 x 1400 x 2000 mm LWH Weight approx. 3000 kg To avoid possible misunderstandings, an on-site inspection is possible and recommended by appointment Sold as is Technical specifications, condition description, year of construction and scope of delivery according to manufacturer's brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “sold as seen” Terms of payment: Prices plus VAT, payment before collection or dispatch Dodpfx Agexwp S Ie Djcf Terms of delivery: ex warehouse

Condition: used, Year of construction: 2019, Used machine Year of manufacture: 2019 Equipment and technical data: Cutting height: vertical 2,150 mm, horizontal 2,070 mm Cutting length: 5,300 mm Cutting depth: 80 mm Saw blade: diameter 303 mm, bore 30 mm, Z=60 alternate top bevel teeth Saw blade speed: 5,000 rpm Motor: 5.5 kW Required air pressure: 6 bar Measurement readout for: - horizontal cuts: via scale and strip cutting stop - vertical cuts: via scale from 0 - 1,300 mm Extraction port: 100 mm Dsdpfx Agowka Nto Docf 5 material support rollers per meter of cutting length 1 infeed and 1 outfeed roller Pneumatic workpiece clamping device between the support rollers 1 central support element per meter of cutting length Twist-resistant, freestanding machine frame Pneumatically retracting slatted frame Round bar guide vertical and horizontal Fine-adjustable folding stop Fine adjustment for horizontal cuts via handwheel Strip cutting stop Manual programming rail with 5 T-nuts Pneumatic plunge of the saw unit Pneumatic saw head lock Control unit at the saw assembly: start button, stop button Operator panel with template holder Electronic digital display for the saw unit Electronic digital display for the folding stop Automatically swiveling saw head Location: Flörsheim Availability: short-term

Condition: used, Year of construction: 2004, functionality: fully functional, Amada HFE 220- L Year of construction 2004 Djdpfx Ageuiwyps Djcf Laser height adjustment Working width 3100mm pressing force 220 tons with many tools

Condition: excellent (used), functionality: fully functional, Year of construction: 2003, machine/vehicle number: NOH366, ABUS ELV Crane Skyline Crane Runway Bridge Crane Hall Crane Crane There are 3 identical cranes available! Dcjdoxtyvpjpfx Ag Dof Load capacity / Lifting capacity: 5t - 5000KG Span: 14,260mm, external dimension approx. 14,500mm Year of manufacture: 2003, with radio remote control and pendant control as backup Lifting height: 6m Overall height (top of crane to hook): approx. 900mm End carriage length with buffer: approx. 280cm Further data to follow Crane is dismantled and immediately available Very good condition, inspection book is available Column-mounted slewing cranes and wall-mounted slewing cranes also available Demag KBK and Abus HB systems, as well as Errikla, Hadef, Stahl KT 2000, etc. Shipping via freight carrier possible, please enquire with postcode Collection preferred

Condition: used, machine/vehicle number: 916183, Year of construction: 2012, operating hours: 2,526 h, lifting height: 5,500 mm, fuel type: diesel, power: 55 kW (74.78 HP), motor manufacturer: Perkins, gearing type: hydrostat, Lifting capacity: 3.000 kg Maximum passing height: 298 cm Front tyres / undercarriage remaining: 0 Rear tyres remaining : 0 Tyre brand: - Transport dimensions (LxWxH): 6.65x2.1x2.97 Please contact PFEIFER GROUP for more information Dsdpfjtvlqxex Ag Docf

Condition: as good as new (ex-display), Year of construction: 2026, Swivel spindle: Yes 0 to 45° Height adjustment: handwheel / electric Dodpfxouzkxxe Ag Docf Swivel adjustment: Handwheel / electric Milling jaw adjustment: manual Height display: Digital display Swivel angle display: Digital display Milling stop indicator: mech counter Milling spindle diameter: 30 mm Speeds: 3000, 4500, 6000, 7000, 10000 Motor power: 7 kW Motor brake: Yes, automatic Suction connection: 2 x 120mm Machine length: 2599mm Machine depth: 900mm Weight: 655kg

Condition: good (used), Crane system with two fixed (l= ~6.000 mm) and three running rails (l= ~6.000 mm) with trolleys which allow the mounting of log clamps with hoist. Dodpfx Ajg Dgh Isg Decf Max weight per rail = 1.000 kg. Mounted from ceiling (no supporting steel structure included). Power supply via integrated conductor line inside the rails (no external wires). Compressed air with outside air pipes (not inside the rails). Option: chain hoist with log clamp to lift logs from a pallet onto a stream feeder.

Year of construction: 2018, condition: good (used), For machining aluminium and steel profiles Fully functional, in very good condition Machining length: 7200mm 3-axis control with 15" screen Tool changer: 8 positions / turret 8 pneumatic horizontal material clamps Autonomous clamp positioning Two separate work zones, suitable for pendulum operation 2 pneumatic material stops 8 tool positions / BT30 turret Barcode scanner Handheld control unit Safety light barrier at the front and side safety fence Minimal quantity lubrication Central lubrication Thread cutting without compensating chuck Simple programming at the control panel High-speed spindle up to 18,000 rpm Including 3 angle heads X-axis [mm]: up to 7,200 / 7,200 Y-axis [mm]: up to 485 / 310 Z-axis [mm]: up to 340 / 260 Rapid traverse speed X/Y/Z axis [m/min]: 60/60/60 Max. milling cutter diameter: 25mm Max. saw blade diameter: 180mm Max. tool length: 200mm (tool + holder) Max. spindle speed: 6,000 rpm Dodpfjx Diqwjx Ag Decf Spindle power: 6 kW Weight: approx. 5.5 t Total operating hours: 30,844 h Total spindle hours: 11,583 h