Briquetting press

compacto Brikettierpresse FOX 70

Condition: new, Year of construction: 2024, New machine Year of construction: 2024 Equipment and technical data: Right-hand version Technical data: Overall dimensions: 1,900 x 1,410 mm Hopper opening: 1,044 x 1,044 mm Hopper height: 1,010 mm Hopper capacity: 1.1 m³ Drive power: 5.5 kW Briquette diameter: 50 mm Hydraulic oil: 160 l Throughput: up to 50 kg/h (depending on material) Paint finish: Weima Standard Connected load: 400 V +/- 5 % / 50 Hz including: Press mechanism with filling cylinder, main cylinder, gripper cylinder Connecting part for transport line Chrome-plated tongs Hydraulic tank 160 l with pump motor + valve control Safety switch for oil temperature Base plate 1,040 x 1,040 mm with agitator + motor and screw channel Screw channel Discharge screw + motor Side walls standard height 1,010 mm Kjdpjt Hagnsfx Aa Esnf Base frame with rubber feet Switch cabinet on hopper and electrical control system Briquette length monitoring Automatic end position of all cylinders Manual control Automatic "On/Off" with level switch Material: Wood shavings, sawdust from solid wood, loose, clean and free of foreign matter*/ Dimensions: max. 12 mm Throughput capacity: approx. 50 m³/year/ * Specification foreign matter: Everything except wood, pieces of wood larger than 12 mm. The throughput capacity is highly dependent on the material. Average values are given. Depending on mixing ratio, moisture and material properties! Application not or not fully known/specified. Machine is sold appropriately and sold by the specialist dealer in accordance with the solution. In the event of heat build-up, the running time can be drastically reduced in accordance with the heating. Availability: short term Storage location: Solingen

Condition: new, Year of construction: 2025, Description Technical data Knsdpfx Asff Hdpsa Eof Scope of delivery Accessories Equipment options Ideal for demanding craftsmen and carpenters The extra long dressing tables in one piece allow easy dressing of the workpieces Worktables are made of grey cast iron, therefore insensitive and permanently flat Backward opening dressing tables with tension spring support for fast and convenient changeover Thanks to the permanently mounted suction hood, it is not necessary to change the suction hose during changeover, which saves valuable working time Helical toothed steel infeed roller ensures constant and even wood infeed Rubber pull-out roller in the thickness outlet ensures even wood pull-out Material feed with four speeds Planer thickness table adjustment via handwheel with integrated display for planing height DIGITAL version: with electrical thicknessing table height adjustment and digital display On and off switch in operator position Powerful industrial motor The high machine weight ensures highest precision and smooth running. Preparation for long hole drilling device Quality Made in Italy Dimensions and weights Length approx. 2250 mm width/depth approx. 1370 mm Weight approx. 695 kg Dresser Total length of the tables 2250 mm Chip removal max. 5 mm Stop length 1200 mm Fence height 150 mm Dust extraction connection Suction nozzle diameter Thickness 1 x 120 mm Drive power Main engine 7 kW Installation information Space requirement Length 2250 mm Space requirement width/depth 1440 mm Explanation Place [...]

Condition: used, SECOND-HAND OLEO PNEUMATIC LATHE FOR TURNING AND SANDING OF SMALL WOODEN ELEMENTS LOCATELLI MOD. OMK 300 - Control panel - Automatic loader - Maximum working length 300 mm - Min / max working diameter 8/80 mm Knodpfx Ajrnq Rioa Esf - Working stations: * automatic loader * turning with n. 2 gouges (roughing + finishing) * 1° shaped knife * 2° shaped knife * unloading

Condition: not inspected (used), Working length max. 400 mm Working width max. 150 mm Wood thickness max. 25 mm Hydraulic motor 2,2 kW 2 milling motors à 2,2 kW Spindle speed 12.000 rpm. Kjdpfx Aajk Tyrws Esnf Frequency converter 8 kVA, 200 Hz Weight ab. 1200 kg

Condition: new, with planing spindle Type R-R-RP1300 Working width 1300 mm Min. working length 538 mm Working thickness 3-110 mm Feeding speed 6-30 m/min Total motor power 77,12 kW Kedpfod H Sc Ejx Aa Esnf Motor for first unit 22 kW Motor for second unit 30 kW Motor for third unit 18,5 kW Abrasive belt size 1330x2200 mm Working air pressure 0,55mpa Volume of dust collection device 12000 m3/h Transport dimensions 3090x2020x2260 mm Weight 4700 kg

Condition: good (used), Technical specifications: Briquetting press in good condition Year of manufacture: 2007 Technically inspected in 06 / 2025 Kjdpfewtdk Tsx Aa Eonf Cylindrical briquette: 80 mm Throughput up to max. 150 kg/h *only approx. 3,949 operating hours - Hydraulic press: briquetting press with discharge chute - Hydraulic unit: 4 kW - Pressure: max. 300 bar - Transport dimensions: 1585/2140/H1940 mm - Weight: 1,370 kg Functional guarantee upon handover We are happy to arrange a free test run!

Condition: new, Year of construction: 2025, ARE YOU INVOLVED IN CUTTING THICK LOGS AND ARE YOU LOOKING FOR A POWERFUL BAND SAW THAT WILL CUT YOUR THICK LOG WITHOUT PROBLEMS? THEN WE HAVE A SOLUTION FOR YOU, THE HORIZONTAL BAND SAW WRC 1550! ✔️ROBUST CONSTRUCTION THAT ENABLES SAW STABILITY Kjdpfx Aaov R Umuj Eonf ✔️MAIN MOTOR 55-110kW ✔️IDEAL RATIO BETWEEN THE DIAMETER OF THE MAIN WHEELS, THE WIDTH OF THE MAIN WHEELS, THE LENGTH, WIDTH AND THICKNESS OF THE BAND SHEET, WHICH ENABLES ACCURATE, FAST CUTTING ✔️DOUBLE-SIDED BEARING WHEELS THAT ENABLE STABILITY OF THE MACHINE EVEN IN THE LONG TERM! ✔️COMPLETE HYDRAULIC EQUIPMENT ON THE SAW HEAD ✔️COMPLETE HYDRAULIC EQUIPMENT ON THE SAW LINE (INCLUDING HYDRAULIC DOUBLE TURNERS DESIGNED SPECIFICALLY FOR TURNING THICK HEAVY LOGS) 👉 For more information and inquiries, contact us!

Condition: good (used), Year of construction: 2002, Robust T 26 Tilting Spindle Moulder, tiltable from -45 to +45 degrees, with 2-axis Duocontrol positioning control Tilting spindle moulder in excellent configuration A real treat for any Martin enthusiast Pole-switchable drive motor 5/6 kW with automatic motor brake Forward/reverse operation Tilting angle electrically adjustable from -45 to +45 degrees Max. height adjustment 150 mm, electrically adjustable When adjusting the height, the correction factor for the tilting angle is displayed on the upper display, which is then set at the stop—this allows settings according to drawings to be easily realized Four spindle speeds: 3000, 4500, 6000, and 9000 rpm Spindle diameter 30 mm, quick-change spindle with torque wrench Electrically adjustable fence, infeed jaw adjustable with handwheel and SIKO counter Axes can be operated manually or automatic positioning of height and fence Fence can be swung away with lift device (for curved work) Table opening via eccentric table rings, electrically adjustable Table extensions on the right and left with extendable workpiece support Support extension up to 700 mm Knjdpfx Aovv H T Rea Eef Table length approx. 2400 mm Swing-away fence for tenoning work Original Martin aluminum fence jaws with two ribs Aigner Centrex workpiece pressure device 3-roller HolzHer 1117 power feed, with 8 speeds, forward/reverse, new rollers Power feed socket, switchable from the control unit Two extraction ports, each 120 mm Compressed air connection 6 bar Emergency stop switch Some machine parts have been newly repainted Approx. 7400 operating hours Operating instructions CE mark Dimensions approx. 3000 x 1700 x 1830 mm (L x W x H). Weight approx. 1800 kg. The machine can be demonstrated on site by appointment. We only offer machines that are ready for demonstration in our warehouse—see "other offers from this provider".

Condition: new, Year of construction: 2025, functionality: fully functional, overall weight: 44,000 kg, rotor length: 2,800 mm, power: 315 kW (428.28 HP), rotational speed (max.): 87 rpm, - MERAK 2800-2 with 315 kW - Cutting system 116PR - PG190 screen (can be changed on customer request) - Feed chute Knsdpfx Asugf Dwsa Eof - Dust suppression - Electrical central lubrication - Hydraulic safety guard - Overband magnetic separator Neodymium - HP - Rubberized bolted floor plates on tracked chassis

Year of construction: 2011, condition: excellent (used), Operating hours 1,523 hrs. - Edge thickness max. 8mm - PLC control (program controlled) - glue height max. 60 mm - Joining unit in synchronous and counter-rotation (with diamond tools) - Gluing station cartridge - Pneumatic pressure unit - cross-cutting station pneumatic swiveling to 10 - Milling station motor adjustable (MOT4) DIA- tool Knedpjma Sg Refx Aa Eef - Keying station vertical pneumatic adjustable - swiveling pneumatic - Corner copying unit (diamond tool) - Radius scraper with motorized adjustment (MOT 2) - Surface scraper Dimensions: 454 cm length 120 cm width 161 cm height (upper edge of control panel)