Scrap shear

Taurus mobil Kettenfahrwerk

Condition: new, Funnel opening: 2,500 x 2,000 mm Rotors: 2 units Crsdjbq St Hopfx Ac Tjg Rotor diameter: 580 mm each Rotor design: 5 and 6 cutting teeth Drive: 2 x 90 kW with planetary gearboxes Hydraulic locking system for sieve flaps to remove disruptive materials Weight: approx. 18,500 kg

Condition: good (used), Year of construction: 2020, operating hours: 590 h, functionality: unexamined, Equipment: Cjdpfsvnq Rkox Ac Terg Methor chain basic package Track chassis including 2 driving speeds Chain 400mm 3-link Additional hydraulic connection 70 l/min 24 V electric control Large radio remote control complete Maintenance-friendly engine compartment with LED light Folding hopper with position sensor and automatic control Hydraulically reversible fan wheel Acoustic start-up warning Fuel tank 300 liters Paint: RAL 2011 deep orange Additional equipment: Rubber quick-change pad Engine Cat C7.1, 205 kW Rear conveyor 6.9 m Frame for overband magnet Overband magnet Roller quick-change system on the roller Roller quick-change system on the machine Irrigation LED work lighting Additional electric pump for operation when the engine is not running Fire extinguisher GN 9 A-3 DIN EN 3

Condition: used, 3-axle truck trailer, low-loader trailer MÜLLER MITTELTAL Type AZP Curtain-sided low loader, low-loader trailer, low loader for machine transport First registration: 2001 Total mileage: approx. 350,000 km Gross vehicle weight: 24,000 kg Unladen weight: 5,500 kg Payload: 18,500 kg Platform height: 840 mm Loading height under tarpaulin frame: 3,200 mm Platform length: 7,450 mm Overall length: 9,150 mm Crsdpfx Acet N Antj Tjg Overall width: 2,550 mm Overall height: approx. 4,050 mm Axle load front: 8,000 kg Axle load middle: 8,000 kg Axle load rear: 8,000 kg Tyres: Michelin 215 / 75 R17.5 (135/133J XTE 2+ TL) - Rear wing doors at drop side height - Tarpaulin frame with EDSCHA roof system - Tarpaulin frame designed for easy removal (can also be used with the frame removed and the tarp pushed forward) - Spare wheel mounted on the front wall - Independent lifting and lowering of front and rear axles - Middle axle with lift function - Drawbar – extendable in multiple stages - Heavy-duty lashing rings on the outer frame and in the vehicle centre - ALU drive-on ramps, length 268 cm, width 410 mm, height 130 mm (surcharge EUR 2,000 net) The trailer was purchased new by us and is therefore first-hand. The trailer has been deregistered since 2025.

Condition: ready for operation (used), Shredder with diesel engine, e.g. for engines, gearboxes, metal, electric parts. The machine is fully operational. We can send a video. Codpow Ngn Esfx Ac Torg

Condition: new, Year of construction: 2023, power: 1,150 kW (1,563.56 HP), total length: 6,460 mm, total width: 1,600 mm, total height: 1,840 mm, Selling price: € 129.500, US$ 150.100 Current frequency: 50 Hz Voltage: 400 Crsdpfx Acjxfrz Ij Tjg

Condition: new, Year of construction: 2024, Gold River SWZ-700 water separators Application description: The GOLD RIVER SWZ series separator has been designed for special tasks, it can cope with the most difficult materials that contain many properties that disturb the separation process in separators commonly available on the market. SWZ water separators separate heavy fractions (non-ferrous metals) from, among others, plastics in the process of recycling secondary raw materials. SWZ separator equipped with a four-section copper water system equipped with radial nozzles with variable linear geometry. The separator uses the latest divided type of separation mat. The development of a modern module for preliminary division and preparation of material guarantees the purity of recovered raw materials in a very short time (plastics, metals). Why a water system? Our device uses a system similar to that used in the gold recovery industry. We use water as a carrier and a force that affects the materials in a gentle way. In the water system, all particles with higher mass are gently washed out and separated, generating no losses during the entire separation process. The properties of water together with our proprietary solutions are unrivaled compared to, for example, air separators. SWZ type separators are used: Separation of heavy from light materials (metal granulates contaminated with plastic, foil, paper, cotton, fibers) Cleaning plastics after air separators (dry) Separation of metals in cable and non-ferrous metal recycling lines The SWZ-700 water separator, thanks to the use of the latest module, performs the separation process in a very short time, therefore it is characterized by a high hourly efficiency of separated material of approximately 1200 kg/h. Description of action: The material fed into the separator goes through the transport channel to the module for initial fraction division into its mass and humidity changes. Some of the material is separated at this stage. In the second part of the module, the humidity of the remaining batch changes. Then the material falls onto the separation table where the final fraction separation takes place. As a result of this process, we obtain valuable materials from both sides of the separator. Construction description: Crjdpfx Aeua Tbwsc Teg The massive structure and the inertial drive of the separator are made of materials appropriately selected to withstand the overloads resulting from vibrations. The supporting frame ensures excellent stiffness and failure-free operation for many years. Due to the type of vibration drive, the design does not require the installation of a soil separator. Separation table equipped with hydraulic adjustment of the angle of inclination. The separation table has a special module for initial division of fractions into their mass and preparation for final separation. The water system has several water pressure valves. The water circulation in the separator is closed. There is no need for constant access to an external water source because the device works using the water already in the tanks. Based on experience and continuous research in our laboratories. We are able to provide you with separators individually adapted to the specific nature of the material being separated. In various versions and sizes. SWZ-700 separators are manufactured to individual order.

Condition: ready for operation (used), functionality: fully functional, power: 83 kW (112.85 HP), overall weight: 6,000 kg, total length: 460,000 mm, total width: 4,000 mm, total height: 4,300 mm, Year of construction: 2024, operating hours: 300 h, type of input current: three-phase, With shredder, centrifuge, and big bag filling station. Includes spark detection and extinguishing system. Approx. 300 operating hours, year of manufacture 2024. Suitable for stainless steel, nickel alloy, and titanium. Throughput capacity up to 1 ton/hour, depending on material. Total connected load: 83 kW. Overall length: 46 m. Height: 6.2 m. Price on request. Available at short notice. Location: Germany. Crjdpoq Nmw Isfx Ac Tsg

Condition: used, x x x Csdsip Rdlspfx Ac Tsrg dismantled x +++++ Please note: The machine is dismantled and ready for loading. It is not possible to show it under power or make a video. Our offer includes already the best pictures. So we don’t have and won’t send additional pictures. +++++

Condition: used, Year of construction: 1992, functionality: fully functional, machine/vehicle number: 511001M, nominal power: 160 kW (217.54 HP), Complete and fully functional Lindemann ZB 120 x 100 - 160kW Schorch drive - Voith fluid coupling - Feed steel slat conveyor - Cyrus extraction vibrator - Axle puller - Hydraulic unit - Spare grates Crjdpfxeyizcqo Ac Tog - Hammers - Various wear parts

Condition: ready for operation (used), Year of construction: 2004, functionality: fully functional, BONFIGLIOLI SQUALO 950 WITH NEW ENGINE! Crsdpfoyg Hhtsx Ac Teg