Used wide belt sanders 1300-1499mm working width for sale (128)

Condition: as good as new (ex-display), Year of construction: 2023, functionality: fully functional, total width: 2,000 mm, total height: 2,070 mm, total length: 1,800 mm, grinding width: 1,350 mm, power: 11 kW (14.96 HP), grinding belt length: 2,150 mm, grinding belt width: 1,370 mm, extraction nozzle diameter: 200 mm, power of feed motor: 800 W, input voltage: 400 V, Slight signs of wear from demonstration. The LIBRA 45 is characterized by a rich range of standard equipment, a very robust construction (both the base frame and the work units), sanding shoes with a larger contact surface and modern control systems Motorized table height adjustment Digital display for the working height Electronically controlled sanding belt oscillation with reduced compressed air requirement Automatic star-delta start-up Natural rubber feed carpet with negative profile Automatic carpet centering Support table with rollers at the inlet and outlet of the feed carpet Kjdpfjvxu E Hox Adtowt Large sanding roller diameter 140 mm Carpet feed via gear motor with two speeds Flexible steel pressure rail in front of the first unit Rubber pressure rollers, in front of and behind each work unit Pneumatic belt tension for each unit with decimal correction option for grain size/belt thickness Equipment: Work table height adjustment with electronic display of the working height Oscillation of the sanding belts with electronic system Rubber-coated grooved pressure roller at the inlet 1° position with Backflow protection (C.E.) Star-delta start of the main motors Grooved calibration steel roller Selector switch for positioning the sanding shoe from the control panel Extraction connection Extraction nozzle diameter 2 x 200 mm Electrical data Power of height adjustment motor 0.25 kW Power of feed motor 0.8 kW Power of drive motor 11 kW Connection voltage 400 V Mains frequency 50 Hz Grinding unit Grinding belt length 2150 mm Grinding belt width 1370 mm Grinding width max. 1350 mm Feed unit Feed speed 4.5 / 9 m/min Workpiece Height min. 4 mm Height max. 170 mm

Condition: used, machine/vehicle number: 006385, Max. machining width: 1000 mm Min. machining thickness: 3 mm Working Table: Fixed pass height Kedpfx Asybawkjdtjwt No. Operating units: 2 Nr

Condition: used, Year of construction: 2011, Used Machine Year of manufacture: 2011 WEBER LCE-2-1350 (DK) Compact Wide Belt Sander with two sanding belts, suitable for calibration, veneer, and intermediate lacquer sanding. Features a constant working height and is equipped as follows: Sanding Units: Contact Roller Unit · Grooved steel contact roller Ø 210 mm for precise calibration · Mechanical adjustment of the contact roller for grit compensation · Pneumatic lifting of the contact roller Combination Unit · Grooved rubber contact roller Ø 130 mm, 60 Shore hardness - mechanical adjustment for grit compensation · Pneumatic lifting of the contact roller · Electronically controlled sanding pad with ISA-System 22/22 ISA (Intelligent Sanding Pressure Adjustment) · Patented segmented pressure beam system with full tolerance compensation · Pressure shoe width: 22 mm (movable longitudinally and laterally) · Universal lamella with pinpoint actuation suitable for all sanding applications (no need to change sanding lamella between veneer and solid wood sanding) · Tolerance compensation: +/- 1 mm ISA-Control · High-resolution workpiece detection with a switching roller per pressure shoe · Free feeding of complex part shapes – multiple feeding with minimal lateral spacing · Sanding intensity individually adjustable at all edges · Sanding pressure adjustable via pressure regulator Kjdpfx Adsx Hll Eotewt · Feed-controlled infeed and outfeed Drive · Sanding belt speed from 2–18 m/s for high material removal rates · Wear-free DC braking · Self-tensioning belt drive Belt Control · Automatic compensation of unequal sanding belt edge lengths · Optical, contactless, and self-cleaning sanding belt detection on the belt change side · Fine adjustment of oscillation on the belt change side · Belt run-off switches left and right Operator Terminal ‘SIEMENS’ MP 177 6” · Graphical user interface via 6” color display · Program memory for 18 programs · Parameter settings available via program Overthickness Protection · Safety bar at machine infeed with the following functions: · Automatic lifting of contact roller and segmented pressure beam · Feed shutoff Workpiece Feed · Rubber-coated and spring-loaded pressure rollers before and after the sanding station · Secure workpiece transport with multiple feeding ensured by pressure lamella with tolerance compensation · High-quality transport belt made of natural rubber · Infinitely variable feed speeds for calibration and fine sanding · 400 mm table extension at both infeed and outfeed with rollers Technical Specifications · Working width: 1350 mm · Sanding unit drive (frequency controlled): 1 x 15.0 kW Availability: Approx. April 2026 Location: Heidelberg

Condition: excellent (used), Year of construction: 2006, Technical data: - working width 1350mm - pneumatic oscillation Kwjdpovdtxijfx Adtst - vacuum table - Stand alone machine ( Table raise/fall ) 1 Combi unit: - motor power 18,5kW - steel calibrating roller - stepless adjustment of the belt speed - sectional pad (52 sections of 26mm each) 2 Combi unit: - sectional pad (52 sections of 26mm each) - motor power 7,5kW - stepless adjustment of band speed - brush on the exit of the material - stepless regulation of feed speed - pneumatic cleaning of belts

Condition: ready for operation (used), Year of construction: 2001, Ott Deltatronic Wide Belt Sander €9,500.00 excl. VAT Kwodpfx Adsyatgiotet Ott Deltatronic Magelis control system Sanding thickness: 3-160 mm Sanding width: 1350 mm 3 units Lacquer sanding package Vacuum Satin finishing brush Cleaning brush Pneumatic slider Year of manufacture: 2001 Condition: Fully functional

Condition: excellent (used), Year of construction: 1992, functionality: fully functional, Wide belt sanding machine, sander 1300mm Manufacturer: Ott Model: RSO-1300 Year: 1992 Working width: 1300mm with roller 15 kW and pad 11 kW Kwjdpfx Adox E Amqstjt + brush Feed speed: 10 m & 20 m/min

Condition: new, DMC SD 90 RCS 135 "C-Plus" version Technical specifications: Useful working width mm 1350 min/max Working height (with fixed table) mm 4 – 200 Abrasive belts mm 1,370 x 2,620 Feed speed m/min 3.5-18 working aggregates: “MESAR 46” 46 sectors (30 mm) flexible electronic link sanding pad complete with B/46 workpiece sensing bar in the infeed Kodpfxjd E Ixzs Adtowt • 1st position: "RA" diagonally ribbed steel contact roller D=250 • 2nd position: COMBI with rubber-coated grinding roller D=175 mm 65 Sh • Floating pressure shoe in 1st position with pneumatic adjustment • 2 grooved rubber coated pressure rollers 2nd and 3rd position • Oscillating blow-off device 1st and 2nd unit • Workpiece cleaning unit with rotating blast nozzles • Motor 1st unit 18.5 kW • Motor 2 with inverter 15 kW Table: • Fixed table working height 900 mm • Infeed roller table for long workpieces • Outfeed roller table for long workpieces • Perforated table and transport carpet 50 Sh • Vacuum table with 4 kW electric fan integrated in the machine frame • Stepless carpet feed from 3.5-18 m/min (gear motor 0.75 kW) Control: • Electronic programming unit "Pro-Sand" • Touch screen 10.4" screen • Door with viewing window on set-up side for machine with 2 working units • LED interior lighting Advise used machines: • Technical data without obligation, mistake and intermediate sale reserve. • Price is considered ex-location price • All articles or machines are bought as seen without any entitlement on warranty. • It is left to the choice of the buyer to view the machines before at its location. • Special arrangements are possible but only valid in written form. (We answer your inquiries only with stated address + telephone number!)

Condition: used, Year of construction: 1976, Used machine Year of manufacture: 1976 Equipment and technical data: - Bottom sanding - Material feed via rubber rollers - Contactless oscillation control - Quick-change pressure beam - Electromotive adjustment of tool thickness with easily readable digital display - Pushbutton with contactor control - Sanding width: 1350 mm - Maximum workpiece thickness: 150 mm - Sanding belt width: 1360 mm - Sanding belt length: 1900 mm Kodpfx Adowpm I Tstjwt - Roller feed switchable between 10 and 20 m/min - Compressed air connection: 6 bar - Air consumption: approx. 180 NL/min Availability: short-term Storage location: 63934 Röllbach

Condition: excellent (used), Independent Machine, Top machine Kodegx Hnhspfx Adtewt Max working width mm 1350 Working height (thickness) mm 3 - 130 Built-in electric and command panel Electronic Programmer PCM (software Costa Sanding Manager) Feeding speed (adjustable) 4 - 24 m/min No. 1 Vacuum unit (power Kw 11) Pressure "shoes" to allow the process of short workpieces Air blowers on the abrasive papers Total power installed KW 69 No. 7 Working groups: 1°) Cross belt TR7, pad with No. 84 sectors (TPR16) (Kw 15, with inverter) 3-16 m/sec 2°) Cross unit XLS (for trimming), with N° 122 abrasive elements (Kw 1,5, with inverter) 3°) Longitudinal unit FTR-3, roller (diam. mm 330) Kw 2,2 with inverter, 40 Sh (3-20 m/sec) 4°) Longitudinal belt TP16, pads with sectors N° 84 / Kw 15 inverter 3-16 m/sec 5°) Longitudinal belt TP16 Super-finisher SF/3250, pads with sectors N° 84 / Kw 15 inverter 3-16 m/sec 6°) Scotch-Brite SB180 (Kw 1,5) diam. mm 180 7°) Rotary air-jet blowers for the panels cleaning SR

Condition: used, Year of construction: 1984, Used machine Year of manufacture: 1984 Condition: fully inspected and serviced Features and technical data: - Includes combination unit with contact roller and sanding pad - Height-adjustable contact roller for calibration - Air-cushion pressure pad controlled by the workpiece - 4-way adjustable grit compensation - Pneumatic belt tensioning device - Rotating texturing brush at the outfeed side of the machine - Sanding width: 1350 mm - Sanding belt length: 1900 mm - Passage height: 150 mm - Main motor: 15 kW Kjdjw R Hh Ujpfx Adtowt - Infinitely adjustable feed speed: 2.5 – 12.5 m/min - Infeed roller table - Separate, additional texturing brush - Outfeed roller table - Digital display device for the electrically powered workpiece thickness adjustment - Automatic workpiece thickness adjustment - Extraction sockets: 2 x 200 mm - Feed belt is functional; damaged at one location (see photo) Dimensions: approx. 2300 x 2000 x 2300 mm Weight approx.: 2500 kg The images show the machine in a condition prior to inspection! Location: Röllbach Availability: approx. 4–6 weeks after order confirmation

Condition: used, Year of construction: 2004, - Cutting width (mm): 1300 - Workpiece thickness max. (mm): 3 -140 - Brushing device: Brush roller diameter 150 mm - Drive for brush-off device (kW): 1.5 Kwodpfxstt Slco Adtot - Transport bed: 3.0 kW FU 4.0 kW - Feed speed (m/min.): 5 - 25 - Workpiece conveyor belt suction clamping system (kW): 7.5 - Total weight (kg): approx. 7500 - Total power connection (kW): approx. 73

Condition: good (used), Year of construction: 2000, • Sanding width (mm): 1350 • Workpiece thickness (mm): 3 - 150 • Total sanding units: 2 • Longitudinal belt: 2 • Contact roller diameter = 200 mm: 1 /15 kW • Combination unit: with small roller • Cleaning brush: 1 x diameter = 120 mm • Vacuum table • Intermediate lacquer sanding • Constant table height Kjdpowwlm Defx Adtowt • Carpet cleaning • Longitudinal unit, motor: 15 kW, 1.8 - 18 m/s • Feed rate: 3 - 12 m/min • Sanding belt length, longitudinal unit (mm): 2,100 x 1,400 • Pressure beam: CSD system, electromagnetic, wear-free • Conveyor belt: new • Availability: inspected, in stock

Condition: used, Year of construction: 2015, With sanding unit consisting of: - 1 combination unit, pneumatically controlled sanding shoe for heavy veneer sanding - Dust brush Vacuum conveyor and vacuum device pre-installed Roller table at infeed 200 mm Roller table at outfeed 1000 mm Constant table – consistent infeed height automatic workpiece thickness adjustment/sensing Machine control via touch screen Used, top condition Brand: Bütfering Type: SWT 215 / L Optimat Year of manufacture: 2015 Machine No.: Working width approx. 1350 mm Passage height approx. 3-160 mm CE type-tested Belt dimensions approx. 1370 mm x 2150 mm (long belts) Feed speed stepless 2.5-13 m/min 1 combination unit 15 kW with profiled steel roller D 160 Kodpfx Adewa Uluotswt Diameter 160 mm Pneumatically controlled air shoe Space requirement approx. 1625 mm x 2000 mm x 2300 mm Weight approx. 1500 kg Total connected load approx. 16 kW Location: 97447 Gerolzhofen, free loaded, unpacked Delivery in as-inspected condition, without warranty or guarantee

Condition: good (used), Code: 0260 Brand: DMC SCM GROUP Model: UNISAND 2000 - CE Standard Automatic wide belt sander with 2 longitudinal units and 1 transverse unit at the inlet for furniture, joinery, custom-made furnishings, panels, wooden doors, window frames, semi-finished products and various - CE Standard Kwodpfjx Dm Tvex Adtjt Technical data: Max working width 1350 mm Min working width 52 mm Min length 400 mm Min/max working height 4/170 mm Belt feed with variable speed motor Longitudinal abrasive belt length 1370 x 2620 mm Transverse abrasive belt length 150 x 6550 mm Lamellar belt length 140 x 6300 mm Automatic belt centring Automatic table positioning Digital display of working thickness Control panel with dustproof membrane keyboard Electronic system for belt oscillation Rubber-coated pressure rollers Automatic belt centring 1° Group: Transverse Sanding Pad with development 6550 mm and fitted with a lamellar belt, guarantee of stability and excellent abrasive belt tensioning Sectioned electronic pad "EPICS" with electronic control "HYDRA" with 46 sectors, with centre distance 30 mm A LED screen allows verification of the operation of the activated pad sectors The unit is equipped with blowers for cleaning the abrasive belt 2-speed motor power 12/15 Kw Suction hood diameter 160 mm Combined longitudinal calibrating/sanding group with steel roller and sectioned electronic pad 46-sector "EPICS" with centre distance 30 mm Reading barrier 46-sector Abrasive belt dimensions 1370 x 2620 mm Roller diameter 220 mm Motor power 15/18,5 Kw Oscillating blowers with electronic control Sectioned electronic sanding pad "EPICS" with 46 sectors and centre distance 30 mm Reading barrier 46-sector Motor power 15 Kw Oscillating blowers Scotch Brite satin roller Diameter 150 mm Motor power 3 Kw Suction hood diameter 160 mm Vacuum table Electronic control HYDRA 35 Compressed air 8 bar Overall dimensions of assembled machine mm 3200 x 2,900 x 2400 h Overall dimensions for transport mm 3200 x 2300 x 2400 h Weight kg 4400

Condition: like new (used), Year of construction: 2019, functionality: fully functional, New wide belt sanding machine for wood panels (including dust extraction) Ksdpfsxxlz Uex Adtewt

Condition: new, Technical data: Working width mm 1.350 Kodshtuvrjpfx Adtewt Min./max. working height mm 4 - 170 grinding belt width/ length mm 1.370/ 2620 Main motor power kW 15,0 with inverter Feed speed variable m/min 3,5 - 18 Working aggregates: 1st unit: "RA" inclined ribbed steel contact roller diameter 160 mm 2nd aggregate: Combi: rubber coated grinding roller diameter 160 mm, 45 Sh Elastic electronic link sanding shoe "MESAR" with 24 segments Version C: - Elastic electronic sanding shoe "MESAR" complete with: - Pneumatic cylinder (On/Off) for the automatic on/off of the sanding roller sanding shoe unit - Activation of the sectors by the electronic control which synchronizes their insertion with the feed speed and controls the number of sectors according to the workpiece geometry. and allows the selection of more or less sectors on the left and on the right side of the workpiece. Versions 135: "MESAR 24" with 24 segments, segment width 55 mm, complete with B/24 workpiece scanning bar in the infeed. Other equipment: Roller table in infeed and outfeed for long workpieces Perforated table and transport carpet Vacuum table with electric fan 4 kW (5,5 PS ) integrated in machine frame Oscillating blow-off device 2nd unit Touch screen 10,4" screen with 'eye S software integration ATTENTION: PICTURES are EXAMPLE PICTURES OF A SIMILAR SD70!

Condition: used, Year of construction: 2012, functionality: fully functional, Grinding unit with contact roller DIAGONAL unit with segmented sanding pads (35 mm segment width) 2 motors with 15 & 11 kW, 400V Pass-through height: 200 mm Constant working height (machine upper section adjustment) Abrasive belt dimensions: 1350 x 2000 mm Automatic thickness adjustment ENORMATIC PLC control with touch screen and operating hours counter Machine version for INTERMEDIATE LACQUER SANDING Pneumatic lifting/lowering of the contact roller Vacuum device complete with integrated fan Infinitely variable feed rate via touch screen Kwjdpfxex Eh Svo Adtst Infinitely variable sanding belt speed and belt air blow-off on 2nd unit Drive roller for sanding pads rubber-coated Machine dimensions approx. 1,800 x 1,800 x 2,100 mm (LxWxH) Weight approx. 2,800 kg

Condition: used, Year of construction: 1983, Used machine Year of manufacture: 1983 Condition: fully checked and serviced, including a new feed belt Features and technical specifications: - Including combination unit with contact roller and sanding shoe - With height-adjustable contact roller for calibration - With workpiece-controlled air cushion pressure shoe - 4-way adjustable grit compensation - With pneumatic belt tensioning device - With a rotating cleaning brush at the outfeed side of the machine - Sanding width: 1350 mm - Sanding belt length: 1900 mm Kwodpfewka T Sex Adtot - Pass-through height: 150 mm - Main motor: 15 kW - Continuously adjustable feed speed, 2.5 - 12.5 m/min - With roller table at the infeed - With digital display for the electrically driven workpiece thickness adjustment - Extraction ports: 2 x 200 mm Dimensions: approx. 2300 x 2000 x 2300 mm Weight: approx. 2300 kg Images show the machine in unrefurbished condition! Availability: approx. end of January 2026 Location: Röllbach

Condition: ready for operation (used), Year of construction: 2001, functionality: fully functional, grinding width: 1,350 mm, working height: 900 mm, workpiece height (max.): 150 mm, grinding belt width: 1,370 mm, TECHNICAL DETAILS Sanding width: 1,350 mm Working height: 900 mm Workpiece thickness: max. 150 mm Abrasive belt width: 1,370 mm Belt speed: 18 m/s Contact roller diameter: 140 mm Feed belt system: length 3,400 mm Feed belt system: width 1,350 mm MACHINE DETAILS Kjdpfxsxwnbbs Adtowt Weight: approx. 3,000 kg 1st unit: 18.5 kW 2nd unit: 15 kW Machine resistance: approx. 800 Pa Operating pressure: 6.8 bar Air consumption: approx. 28 l/min Feed drive: 0.7/0.9 kW (2 speeds) Feed speed: steplessly adjustable: 2.5–13 m/min EQUIPMENT Segmented sanding pad Combination unit

Year of construction: 1997, condition: good (used), - Working width (mm): 1300 - CSD system - Cross sanding unit Kodpfeidi Ivox Adtowt - Longitudinal sanding unit - Shoe - Brush unit - Ionization

Condition: used, Kündig Premium-2 1350 RP Quality product from Switzerland Constant Table Machine / Automatic Head Positioning Wide-Belt Calibration & Fine Sanding Machine 1st Unit: Grooved Rubber Contact Roller, 80 Sh Contact Roller Level Infinitely Adjustable According to Grit Scale 2nd Unit: Pneumatic Sanding Pad Unit Abrasive Belt Drive Motor Power: 15 kW Working Width: 1350 mm Maximum Workpiece Pass-Through Height: 200 mm Feed Speed: 3 - 15 m/min, Infinitely Adjustable Automatic Workpiece Thickness Setting ENORMATIC Quick Adjustment with Feed Activation (for long workpieces) PLC Control with Touch Screen and Teach-in Memory for Automation and Management of All Work Programs Kodpsx A T Epefx Adtowt Infeed and Outfeed Tables with Roller Support Additional Foldable Outfeed Table Machine is KÜNDIG – FACTORY SERVICED First delivered in 2018 from training workshop / retirement Few operating hours Available ex stock Lieboch / Leasing option

Condition: excellent (used), Year of construction: 2016, functionality: fully functional, Costa K6 CCC 1350 wide belt sander Kjdpfoukgikjx Adtswt Year of manufacture: 2016 Technical condition: very good Costa K6 CCC 1350 wide-belt sander from 2016 is a robust industrial machine for sanding and calibrating wooden surfaces. Here are the key technical data of this machine: - Sanding width: 1350 mm - Number of sanding units: 3 It includes a steel calibration roller, a hard rubber roller and a soft rubber roller to ensure precise grinding. Additional features: Cleaning units with a combination brush and air blowing system, short workpiece presses and an air blowing system at all sanding units. Weight: The total weight of the machine is 4,300 kg. The machine is valued for its sanding precision and ability to handle large volumes of material, making it ideal for the woodworking and panel manufacturing industries.

Condition: ready for operation (used), Year of construction: 1994, Operating voltage: 380V Frequency: 50Hz Weight: 7500 Current consumption: 172 A Year of manufacture: 1994 Calibration: Standard: 1350 x 2620 mm Cross-grinding: Standard: 5400 x 150 mm Longitudinal grinding: Standard: 1350 x 2620 mm Machine dimensions Kjdpfxjt Dk Sij Adtswt Working width: 1300 mm

Condition: new, Year of construction: 2025, New machine Year of manufacture: 2025 Features and technical data: MODEL: Excel 2NRKRT 2-BELT MACHINE 1ST BELT ROLLER, 2ND BELT COMBINATION UNIT ROLLER/SHOE FOR SOLID WOOD, VENEER AND INTERMEDIATE LACQUER SANDING - Usable WORKING WIDTH mm: 1350 - SANDING BELT LENGTH mm: 1370 x 2150 - MAX. WORKPIECE THICKNESS mm: 160 - STEEL CALIBRATION ROLLER mm: 180 - Rubber-coated SANDING ROLLER mm: 180 - SANDING SHOE WIDTH mm: 50 - MAIN BELT MOTOR POWER kW: 14.7 - BELT SPEED m/s: 18/16 - FEED MOTOR POWER hp: 0.75 - Infinitely variable feed belt gearbox, speed adjustable m/min: 4/20 - HEIGHT ADJUSTMENT MOTOR hp: 0.33 - Mechanical BELT OSCILLATION "ECO GEAR PATENT SYSTEM" - 1 pc. DRUM BRAKE for belt braking - Pivoting ROLLER for belt tensioning - 3 pcs. PRESSURE ROLLERS with rubber coating - EMERGENCY STOP BAR at infeed Kwedpfxew Tfwts Adtst Availability: short notice Location: Flörsheim

Condition: used, machine/vehicle number: 008201, Max. machining width: 1300 mm Min. machining thickness: 200 mm Working Table: adjustable Vacuum feed belt: yes No. Operating units: 3 Nr Kedpfx Asxmgyhsdtswt