Used wide belt sanders 1300-1499mm working width for sale (132)

Condition: excellent (used), Year of construction: 2023, operating hours: 60 h, functionality: fully functional, machine/vehicle number: AE00003516, grinding width: 1,370 mm, overall weight: 1,800 kg, grinding height: 170 mm, workpiece height (max.): 170 mm, workpiece width (max.): 1,350 mm, - Wide-belt sanding machine DMC SD 70 RCS 135 - DMC SD 70 model, RCS 135 version First "R" unit with roller and second "CS" combination unit with roller/sanding pad - Working width mm 1,350 Min./Max. working height mm 4-170 Sanding belt dimensions mm 1,370x2,620 Main motor power kW (HP) 11 (15) Feed rate m/min 4.5/9 - 160/85 rubber-coated calibrating roller, diameter 160 mm, 85 Sh - 1st position - R160/45 rubber-coated sanding roller, diameter 160 mm, 45 Sh - 2nd position - Hard sanding pad with manual adjustment of the working height Ijdpfx Aszydafskpobb - Motor power, 1 unit: 11 kW (15 HP) - Electronic ammeter for the main motor to display current draw - Electronic display of the working height - Electronically controlled sanding belt oscillation - Rubber pressure rollers - Kickback protection at the infeed before the first unit - Rubber feed carpet, 60 SH - Roller table with two rollers at the infeed and outfeed of the work table - Carpet feed with two speeds 4.5 / 9 m/min with gear motor - Automatic carpet centering

Condition: used, Year of construction: 1993, functionality: fully functional, grinding width: 1,350 mm, grinding height: 150 mm, working height: 150 mm, height adjustment type: electric, workpiece height (max.): 150 mm, - Very good condition - Year of manufacture: 1993 - Electronic PLC control: Heesemann - Model / Type: LSM 6 TECHNICAL PARAMETERS: - Working sanding width: 1350 mm - Max. thickness of workpieces: 150 mm MACHINE CONFIGURATION: I – Cross sanding unit (sergeant type) with sequential electronic pressure - Main motor: 13 kW - Pneumatic photo sensor oscillation - Extraction port: 1 x 180 mm - Sanding belt size: 5480 x 150 mm II – Combination unit with pad - Main motor: 13 kW - Belt cleaning system with oscillation - Pneumatic pad pressure - Pneumatic photo sensor oscillation - Extraction port: 1 x 180 mm - Sanding belt size: 2620 x 1350 mm - PNEUMATIC PHOTO SENSOR OSCILLATION - Pneumatic bar cleaning system with oscillation for cleaning belts III – Combination unit with pad - Main motor: 13 kW - Sanding belt cleaning system - Pneumatic pad pressure - Extraction port: 1 x 180 mm - Sanding belt size: 2620 x 1350 mm Ibedpow H Sk Tofx Akpjb IV – Cleaning brush unit for workpiece behind the main unit at the outfeed - Motor: 1.1 kW - Extraction port: 1 x 140 mm - Feed regulated by gear motor: 4 kW feed motor - Feed speed: 6–26 m/min - Air requirement: approx. 28 m/sec, 4340 m³/h - Compressed air consumption: approx. 800 l/min - Feed belt: 5-segment - Pneumatic feed belt cleaning system - Automatic sanding height adjustment with electronic display - Motor: 0.55 kW - Suitable for sanding lacquer and intermediate sanding between coats - Dimensions (LxWxH): 3750 x 3230 x 2300 mm - Weight: approx. 8000 kg

Condition: like new (used), Year of construction: 2019, functionality: fully functional, New wide belt sanding machine for wood panels (including dust extraction) Iedpfx Ajxxlz Uskpebb

Condition: excellent (used), Year of construction: 2002, functionality: fully functional, machine/vehicle number: 4607269, total width: 2,100 mm, total height: 2,400 mm, total length: 2,830 mm, working width: 1,350 mm, grinding width: 1,350 mm, overall weight: 2,850 kg, grinding height: 160 mm, power: 22 kW (29.91 HP), height adjustment type: electric, type of input current: three-phase, conveyor belt speed: 20,500 mm/s, grinding belt length: 2,620 mm, workpiece height (max.): 160 mm, compressed air connection: 6 bar, grinding belt width: 1,380 mm, table height adjustment: 157 mm, power of feed motor: 1,500 W, input frequency: 50 Hz, air demand: 1 m³/h, input voltage: 400 V, operating pressure: 6 bar, workpiece width (max.): 1,350 mm, pass-through height: 160 mm, 🪵 2002 Viet Challenge 223 Wide Belt Sander – Heavy-Duty Finishing, Very Good Condition Take your wood finishing to the next level with this 2002 Viet Challenge 223 Wide Belt Sander – a high-performance sanding solution for woodworking professionals. Built in Italy for precision and durability, the Viet Challenge 223 is trusted by cabinetmakers, joiners, and production workshops across Europe. Isdpfxownr A Ho Akpebb Now available in very good condition, this twin-head sander offers consistent results on solid wood, veneered panels, and composite materials – ideal for both calibration and fine finishing. ✅ Key Features – Viet Challenge 223/20 Year of Manufacture: 2002 Condition: Very good – clean, well-maintained, fully operational Sanding Heads: 2 (roughing + finishing) Working Width: 1,350 mm Working Thickness: 3 – 160 mm Minimum Workpiece Length: Approx. 400 mm Abrasive Belt Dimensions: 1,380 mm x 2,620 mm Main Motor Power: 11 kW + 11 kW (approx.) Feed Speed: Variable, 3.7 to 20.5 m/min Powered Height Adjustment Emergency Stop and Safety Features Feed Motor: 1.5kW Lifting Motor: 0.37kW Suction Speed: 25m/s Compressed Air: 6 bar Air Consumption: 17 l/min Machine Dimensions: 2830 x 2100 x 2400mm Machine Weight: 2850kg 🧱 Ideal For: Solid wood panel calibration Veneered panel sanding MDF and composite board finishing Flat panel furniture components General wood surface preparation and finishing 📦 Machine Includes: Viet Challenge 223 main sanding unit Twin sanding heads for combined roughing & fine finish Integrated feed table and dust extraction ports Original manuals and safety guards Fully tested and ready for operation 📍 Availability & Delivery This machine is in stock and available for immediate inspection and delivery. Shipping support available throughout Ireland, UK, and Europe. 📞 Enquire Now Looking for a dependable wide belt sander with professional-grade features? This Viet Challenge 223 is a rare find at this price and condition. Viet Challenge 223 Wide Belt Sander for sale Used wide belt sander in very good condition Heavy-duty industrial sander for woodworking Woodworking sanding machine for panels Twin-head wide belt sander for solid wood Viet wide belt sander UK / Ireland / Europe Wide belt sander for furniture and cabinetry production

Condition: used, Year of construction: 2007, Bütfering SCO 313 QEH 1. Cross Sanding Unit "Q" Segment width: 25 mm Unit type: Cross sanding unit with electronic pressure beam Pressing element: CPS 2 system with variable sanding and edge pressure Motor power: 13.5 kW Belt speed: 1-16 m/s Belt dimensions: 5360 x 150 mm Belt air cleaning 2. Unit with Electronic Pressure Beam "E" Segment width: 25 mm Unit type: Unit with electronic pressure beam Pressing element: CPS 2 system with variable sanding and edge pressure Motor power: 7.5 kW Belt speed: 2-18 m/s Belt dimensions: 2620 x 1350 mm Belt air cleaning 3. Unit with Pressure Lamella Belt "H" Segment width: 25 mm Unit type: Unit with electronic pressure beam and internal lamella belt Pressing element: CPS 2 system with variable sanding and edge pressure Motor power: 20 kW Belt speed: 1.5-12 m/s Belt dimensions: 2620 x 1350 mm Belt air cleaning Year of manufacture: 2007 Ibsdpew Sh Apsfx Akpsb Price: 17,500.-

Condition: used, Kündig ENORM 1300-2 wide-belt sander for the precise calibration and fine sanding of solid wood, veneer and wood-based materials. This robust industrial model, featuring two sanding units and a cleaning brush, delivers high material removal rates and precise surface quality in the furniture and interior fit-out sectors. Ideal for craft and industrial businesses with high quality standards, including a set of sanding belts. Technical data: Ibjdpozryxnefx Akpob - Working width: approx. 1,300 mm - Grinding units: 2 - Clearance height: max. approx. 150 mm - Motor power: 18.5 & 15 kW

Condition: used, machine/vehicle number: 007984, Max. machining width: 1300 mm Min. machining thickness: 4 mm Working Table: Fixed pass height Vacuum feed belt: yes Ibodpfxswqdbms Akpeb No. Operating units: 4 Nr

Condition: used, machine/vehicle number: 008027, Max. machining width: 1350 mm Ibjdpfx Akewvq E Aepjb Min. machining thickness: 3 mm Working Table: Fixed pass height Vacuum feed belt: yes No. Operating units: 4 Nr

Condition: used, machine/vehicle number: 008654, Max. machining width: 1350 mm Min. machining thickness: 3 mm Working Table: adjustable Vacuum feed belt: yes No. Operating units: 2 Nr Iedpfx Aezpfbiskpobb sectioned swab: yes

Condition: used, machine/vehicle number: 006385, Max. machining width: 1000 mm Ijdpfsy Nktmex Akpebb Min. machining thickness: 3 mm Working Table: Fixed pass height No. Operating units: 2 Nr

Condition: used, machine/vehicle number: 007613, Max. machining width: 1350 mm Min. machining thickness: 3 mm Working Table: Fixed pass height Vacuum feed belt: yes Ibjdpfx Akjx A Tagjpsb No. Operating units: 3 Nr

Condition: used, machine/vehicle number: 007614, Max. machining width: 1300 mm Working Table: adjustable Isdpfx Ajx A Tatjkpobb Vacuum feed belt: yes No. Operating units: 3 Nr

Condition: used, machine/vehicle number: 008399, Max. machining width: 1350 mm Isdpjy I Tm Hofx Akpsbb Working Table: Fixed pass height No. Operating units: 4 Nr

Condition: used, machine/vehicle number: 008400, Max. machining width: 1350 mm Working Table: Fixed pass height No. Operating units: 4 Nr Ibedpfxoywafbj Akpeb

Condition: excellent (used), CATALOG NUMBER 7910 TECHNICAL DATA - Max. working width: 1350mm - Max. working height: 150mm – From above: - Rubber pressure roller I unit (metal grooved roller for calibration) II unit (two smooth metal rollers + sequential sanding pad) - Rubber pressure roller - Cleaning brush Iedpjy T Ip Tefx Akpjbb – From below: - Infeed roller, metal - Feed belt - Outfeed roller, metal, slip type - Pneumatic belt oscillation with photocell control - Electric table lifting - 2 feed speeds: 2–14m/min - Main motor: 5.5/15 kW - Brake - Grinding height potentiometer - Feed motor: 0.75kW - Working pressure: 8 bar - Extraction nozzle diameter: 200mm, 120mm - Dimensions (L/W/H): 1860x2200x1980mm - Weight: 1995kg ADVANTAGES – German-made – Unpainted – DTR technical documentation included – Used sander, in very good condition Net price: 38,900 PLN Net price: 9,260 EUR based on 4.2 EUR rate (Prices may change with significant rate fluctuations)

Condition: excellent (used), Working width: 1,360 mm Workpiece thickness: 3 – 160 mm Abrasive belt dimensions: 1,360 x 1,900 mm Variable feed speed: 7 - 14 m/min Feed motor power: 1.1 kW, 400 V, 50 Hz Extraction port diameter: 2 x 160 mm Compressed air supply: 6 bar Dimensions (L x W x H): 2,160 x 2,260 x 2,025 mm Weight: approx. 2,200 kg 1st unit: Steel contact roller Motor power: 15 kW, 400 V, 50 Hz 2nd unit: Sanding pad, rigid for fine sanding of solid wood & pneumatically controlled (timed) for veneer sanding 3rd unit: Cleaning brush Abrasive belt oscillation with selector switch Feed conveyor oscillation pneumatic Motorized workpiece thickness adjustment with LED display Units equipped with emergency brake device Emergency stop button at infeed Roller table extension at infeed Complete documentation included Iedoych Igspfx Akpsbb Note – Used machines: • Subject to technical changes and prior sale. • Prices quoted are ex location – loaded on truck! • The machine has been cleaned and functionally tested. • All machines are sold as inspected, with no warranty or guarantee. Buyers are free to inspect the machines at the site. • Special agreements are only valid in writing. (We will only respond to inquiries that include your address and telephone number!)

Condition: excellent (used), Wide belt sander for calibration and fine sanding Working width 1100 mm Min. / max. workpiece height 3 - 120 mm Feed motor power 0.8 kW Sanding belt speed 18 m/sec Sanding belt dimensions 1115 x 2620 mm Feed speed 4.5 / 9 m/ min Isdpfxotwzyfj Akpsbb Suction connection 3 x 160 mm Compressed air connection 6 bar 1st unit Sanding roller rubber-coated 90 Sh Motor power 11 kW 2nd unit Combi unit Rubber-coated sanding drum 60 Sh Sanding pad, rigid Motor power 11 kW 3. cleaning brush unit Automatic workpiece thickness adjustment at infeed with digital workpiece thickness display Table extension in the outfeed Dimensions approx. L x W x H = 2291 x 1784 x 2350 mm Weight approx. 3000 kg Note used machines: - Subject to errors in technical specifications and prior sale. - Prices quoted are ex location - free loading! - The machines have been cleaned and functionally tested. - All machines are purchased as seen without any warranty. The buyer is free to inspect the machines on site. - Special agreements are only possible in written form. (Inquiries will only be answered with your address and telephone number).

Condition: new, DMC SD 90 RCS 135 "C-Plus" version Technical specifications: Useful working width mm 1350 min/max Working height (with fixed table) mm 4 – 200 Abrasive belts mm 1,370 x 2,620 Feed speed m/min 3.5-18 working aggregates: “MESAR 46” 46 sectors (30 mm) flexible electronic link sanding pad complete with B/46 workpiece sensing bar in the infeed • 1st position: "RA" diagonally ribbed steel contact roller D=250 • 2nd position: COMBI with rubber-coated grinding roller D=175 mm 65 Sh • Floating pressure shoe in 1st position with pneumatic adjustment • 2 grooved rubber coated pressure rollers 2nd and 3rd position • Oscillating blow-off device 1st and 2nd unit • Workpiece cleaning unit with rotating blast nozzles • Motor 1st unit 18.5 kW • Motor 2 with inverter 15 kW Table: • Fixed table working height 900 mm • Infeed roller table for long workpieces Isdpfx Aed E Ixzskpebb • Outfeed roller table for long workpieces • Perforated table and transport carpet 50 Sh • Vacuum table with 4 kW electric fan integrated in the machine frame • Stepless carpet feed from 3.5-18 m/min (gear motor 0.75 kW) Control: • Electronic programming unit "Pro-Sand" • Touch screen 10.4" screen • Door with viewing window on set-up side for machine with 2 working units • LED interior lighting Advise used machines: • Technical data without obligation, mistake and intermediate sale reserve. • Price is considered ex-location price • All articles or machines are bought as seen without any entitlement on warranty. • It is left to the choice of the buyer to view the machines before at its location. • Special arrangements are possible but only valid in written form. (We answer your inquiries only with stated address + telephone number!)

Condition: new, Technical data: Working width mm 1,350 Min./max. working height mm 4 - 170 Sanding belt width/length mm 1,370/2,620 Main motor power kW 18.5 with inverter Feed speed, variable m/min 3.5 - 18 Working units: 1. Unit: "RA" diagonally ribbed contact roller, Sh 86, diameter 160 mm 2. Unit: Combi: rubber-coated sanding roller, diameter 160 mm, 45 Sh Elastic electronic segmented sanding pad "MESAR" with 24 segments Version C: - Elastic electronic segmented sanding pad "MESAR" complete with: - Pneumatic cylinder (on/off) for the automatic raising and lowering of the sanding roller/sanding pad unit - Activation of the sectors via the electronic control system, which synchronizes their engagement with the feed speed and controls the number based on the workpiece geometry, and enables the selection of more or fewer sectors to the left and right of the workpiece. Version 135: "MESAR 24" with 24 segments, segment width 55 mm, complete with B/24 workpiece sensing strip at the infeed Additional equipment: Roller table at the infeed and outfeed for long workpieces Ibodpshtuvrefx Akpeb Perforated table and conveyor belt Vacuum table with electric fan 4 kW (5.5 hp) integrated into the machine frame Oscillating blow-off device, 2nd unit Touch screen 10.4" display with 'eye S software integration' ATTENTION: IMAGES are EXAMPLE IMAGES of a SIMILAR SD70!

Condition: excellent (used), Year of construction: 2008, Working width: 1100 mm Workpiece thickness: 3 – 160 mm Abrasive belt dimensions: 1,120 x 1,900 mm Variable feed speed: 2.6 - 13 m/min Feed motor output: 1.10 kW, 400 V, 50 Hz Extraction port diameter: 2 x 160 mm Compressed air supply: 6 bar Dimensions (L x W x H): 1705 x 1545 x 1905 mm 1st unit: Steel contact roller, diameter 160 mm Motor output: 15 kW, 400 V, 50 Hz 2nd unit: Combination unit with rubber-coated contact roller (Sh 65), rigid sanding shoe Motor output: 11 kW, 400 V, 50 Hz Abrasive belt cleaning via compressed air 3rd unit: Cleaning brush Multi-function display Multi-function lever (conveyor belt, workpiece thickness adjustment) Electronic belt oscillation Pneumatic conveyor carpet oscillation Motorized workpiece thickness adjustment with LED display in 0.1 mm increments Ibedpfx Aksychqzepob Units with emergency braking system Emergency stop button at infeed & outfeed Motor protection switch Roller table extension at infeed with 2 loose rollers Automatic star/delta start Complete documentation Note for used machines: • Specifications and prior sale subject to change. • Stated prices are ex works – loaded free of charge! • The machine has been cleaned and functionally tested. • All machines are sold as seen, without any warranty or guarantee. Buyers are welcome to inspect the machine on site. • Special agreements are only possible in written form. (We only respond to inquiries providing your address and telephone number!)

Condition: excellent (used), Year of construction: 2003, For calibration of solid wood/hard wood In line machine ( Fixed table hight : 900 mm ) Max working width : 52 - 1350 mm Min working lenght : 400 mm Working hight : 4 - 170 mm ( Digital motorized up/down ) Infeed speed : 3 - 18 mtr/min Configuration : 1 agg : Steel Roller/drum, 45 Kw 2 agg : Rubber roller/drum, 37 Kw (schore 85 ) 3 agg : Brush Extra new steel roller/drum + extra new rubber roller/drum included ( see pictures attached ) Ibsdpozuvy Hjfx Akpsb Extra 15 package of sanding paper included( brand new )

Condition: excellent (used), Year of construction: 2018, Wide-belt sanding machine SCM DMC SYSTEM TM 1650 Year of manufacture: 2018 Sanding width: 1,650 mm Workpiece thickness (min.): 3 mm Vertical clearance: 170 mm Iodpfx Akjzx R Dnepobb

Condition: excellent (used), Year of construction: 2023, working width 1300 mm workpiece height max. 3 - 140 mm Control Xinje XD5 min/max. pitch cone length 200 - mm total power requirement 13,4 kW Ijdpfx Akjylp A Depsbb weight of the machine ca. 4,5 t dimensions of the machine ca. 5,1 x 2 x 2,3 m

Condition: ready for operation (used), Year of construction: 1994, functionality: fully functional, working width: 1,300 mm, TECHNICAL DETAILS Working width: 1,300 mm Ijdpfx Akszktntjpsbb EQUIPMENT Vacuum conveyor belt Satinizing roller Brush roller EA dust extraction machine with high-pressure blowing system and rotating nozzles Ionization for statically charged dust Cross-grinding unit with belt blowing device Longitudinal grinding unit, infinitely adjustable speed, with belt blowing device Calibrating roller can be activated via the control panel

Condition: as good as new (ex-display), Year of construction: 2026, functionality: fully functional, working width: 1,350 mm, grinding width: 1,350 mm, overall weight: 4,600 kg, grinding height: 160 mm, height adjustment type: electric, grinding belt length: 2,620 mm, workpiece height (max.): 160 mm, grinding belt width: 1,400 mm, workpiece width (max.): 1,350 mm, Heesemann HSM.3 multi-purpose surface grinding machine with crosshead unit, calibration unit, and DB-S unit. An all-rounder in a compact space. Ibjdpfx Asztafwjkpjb Calibrating, veneer and lacquer sanding, texturing, polishing, sanding fillers, edge rounding, ... - Automatic workpiece thickness measurement - Adjustable vacuum, integrated into the machine body - Height adjustment not via a chain drive, but via direct drive - Non-driven rollers at the infeed and outfeed (2 each) - Industrial PC 15.6", terminal on the front left - Program memory for up to 1000 programs - Feed rate 3 - 15 m/min - MMI package - Program for remote maintenance - Program for dust extraction flap control - Cross-sanding unit, 15 kW, stepless sanding belt speed, for veneer sanding (longitudinal and transverse), lacquer sanding, saw-rough effect, with sanding belt cleaning, pressure bar with computer-controlled selective pressure control system CSD - Longitudinal sanding unit with pressure lamella belt and calibration function, 15 kW, stepless sanding belt speed, calibrating, fine sanding, and lacquer sanding, with sanding belt cleaning, pressure bar with computer-controlled selective pressure control system CSD - Rotating disc brush unit DB-S, for fine sanding, lacquer sanding, edge rounding, sanding fillers, polishing, texturing - Uninterruptible power supply - Energy Management System EMS - Ionization bar from above - Workpiece extraction system with individually controllable, rotating compressed air nozzles, inside the machine frame, conveyor belt cleaning program - LED lighting in the machine - and much more The machine is available in our showroom for demonstrations. Inspections and trial runs can be arranged by appointment.