Wide belt sander HEESEMANN 135
HEESEMANN 135 LSM 6

Name: HEESEMANN 135 LSM 6
Brand: HEESEMANN
Price: 8550 EUR
Availability: InStock

Fixed price plus VAT

€8,550

Year of construction

1993

Condition

Used

Location

Miechucino Poland

Wide belt sander HEESEMANN 135 HEESEMANN 135 LSM 6

Show map

Machine data

Machine type:: Wide belt sander HEESEMANN 135

Manufacturer:: HEESEMANN

Model:: 135 LSM 6

Year of construction:: 1993

Condition:: used

Functionality:: fully functional

Price & Location

Fixed price plus VAT

€8,550

Location:: Moujsz 51A, 83-334 Miechucino, Polska

Call

Technical details

Grinding width:: 1,350 mm

Grinding height:: 150 mm

Working height:: 150 mm

Height adjustment type:: electric

Workpiece height (max.):: 150 mm

Details about the offer

Listing ID:: A19723550

Update:: 27.10.2025

Description

- Very good condition
- Year of manufacture: 1993
- Electronic PLC control: Heesemann
- Model / Type: LSM 6

Dcjdpfx Agew H Sk Ts Dof
TECHNICAL PARAMETERS:

- Working sanding width: 1350 mm
- Max. thickness of workpieces: 150 mm

MACHINE CONFIGURATION:

I – Cross sanding unit (sergeant type) with sequential electronic pressure
- Main motor: 13 kW
- Pneumatic photo sensor oscillation
- Extraction port: 1 x 180 mm
- Sanding belt size: 5480 x 150 mm

II – Combination unit with pad
- Main motor: 13 kW
- Belt cleaning system with oscillation
- Pneumatic pad pressure
- Pneumatic photo sensor oscillation
- Extraction port: 1 x 180 mm
- Sanding belt size: 2620 x 1350 mm
- PNEUMATIC PHOTO SENSOR OSCILLATION
- Pneumatic bar cleaning system with oscillation for cleaning belts

III – Combination unit with pad
- Main motor: 13 kW
- Sanding belt cleaning system
- Pneumatic pad pressure
- Extraction port: 1 x 180 mm
- Sanding belt size: 2620 x 1350 mm

IV – Cleaning brush unit for workpiece behind the main unit at the outfeed
- Motor: 1.1 kW
- Extraction port: 1 x 140 mm
- Feed regulated by gear motor: 4 kW feed motor
- Feed speed: 6–26 m/min
- Air requirement: approx. 28 m/sec, 4340 m³/h
- Compressed air consumption: approx. 800 l/min
- Feed belt: 5-segment
- Pneumatic feed belt cleaning system
- Automatic sanding height adjustment with electronic display
- Motor: 0.55 kW
- Suitable for sanding lacquer and intermediate sanding between coats
- Dimensions (LxWxH): 3750 x 3230 x 2300 mm
- Weight: approx. 8000 kg

The listing was translated automatically. Translation errors are possible.

Seller

Registered since: 2013

150 listings online

Call

Send inquiry

Telephone & Fax

+48 58 32... show

+48 58 68... show

Fax:

These listings may also fit your interest.

Listing

Petrovče

1,849 km

Wood shredder
RobustSD 900 XL/30 kW

Call

Condition: new, Year of construction: 2026, ♻ Universal use (diverse wood, pallets with nails and pins, particle boards, waste and scraps, veneer, MDF plates, cardboard boxes, plastics, textile etc.) ✔ Power: 30 kW ✔ Shaft length: 870 mm ✔ Shaft diameter: 270 mm ✔ Shaft RPM: 80-120 rpm ✔ Number of cutting knives: 38 ✔ Granulation: 10-50 mm ✔ Capacity: up to 8 m3/h* Djdpjiq U Aysfx Ag Decf ✔ Filling opening: 2031 x 1565 mm ✔ Dimensions L/W/H: 3,21/1,97/2,04 m ✔ Weight: 2450 kg 2 years warranty or 2000 working hours

See details

Listing

Teisendorf

1,601 km

Wide-belt sander
HeesemannJSM 1350 RC

Call

Condition: new, Year of construction: 2025, functionality: fully functional, grinding width: 1,300 mm, grinding height: 160 mm, height adjustment type: electric, grinding belt length: 2,150 mm, Heesemann JSM 1350 RC Surface grinding machine Built in 2025, new machine, currently the only exhibition machine in Europe! - Electric height adjustment via terminal: 3 - 160 mm - Continuous feed: 3 - 12 m/min - Sanding units with separate motors and continuously variable sanding belt speeds up to 18 m/s Djdpswcqr Asfx Ag Decf - Table extensions at the infeed and outfeed - 15.6" industrial PC - Program memory for 100 programs - Remote maintenance - Contact roller unit with steel roller Sanding belt dimensions: 2,150 x 1,370 mm Belt speeds: 18 m/s Drive power: 15 kW Diameter: 160 mm - Longitudinal sanding unit Sanding belt dimensions: 2,150 x 1,370 mm Belt speeds: 18 m/s Drive power: 15 kW Front calibration deflection roller Ø 160 mm, rubberized (65° Shore hardness), grooved - Energy Management System EMS - Doors with glass inserts - LED lighting inside the machine - Vacuum table with preparation (drilled holes) for connecting the vacuum blower - Vacuum blower (inside the machine) - Workpiece cleaning with oscillating blower tube - CSD (magnetic pressure bar) The machine is connected and can be inspected on-site by appointment. Please do not hesitate to contact us if you have any questions.

See details

Listing

Soerendonk

967 km

Hammermill
van Randwijks500 x 700

Call

Listing

Nevers

1,083 km

Panel saw
BIESSESELCO EB 95

€34,000

Fixed price plus VAT

Condition: ready for operation (used), Technical characteristics Cutting dimensions: 4300 x 4400 mm Max. blade projection from work surface (cutting height): 95 mm Main blade max. diameter 320 mm, motor 7.5 kW Scoring blade max. diameter 200 mm, motor 2.2 kW Blade carriage speed adjustable from 5 to 120 m/min Pusher feed up to 60 m/min Dedpfxeucirko Ag Dscf Automatic lateral alignment device 4 air-cushion unloading tables with rounded profile 9 pneumatic clamps Windows PC-based control Remote-controlled Start cycle pusher, including emergency pusher QUICK CHANGE device (quick blade release) Printer for labelling Power and Motors Voltage: 400 V Pluging: Three-phased Overall dimensions

See details

Listing

Complete painting plant SORBINI /VIET 800

Đakovo

2,117 km

Complete painting plant
SORBINI /VIET800

Call

Listing

3D UV-Dryer Superfici Poliedra x 2 + TU 3500

Łomianki

1,947 km

3D UV-Dryer
SuperficiPoliedra x 2 + TU 3500

Call

Condition: good (used), Year of construction: 2010, Poliedra is a dryer suitable for the curing of UV lacquers on three-dimensional surfaces. In the case of spray applications, the UV dryer must also cure the product applied to the vertical edges of the panel. Superfici developed UV modules with special reflectors. The special geometry of the reflector of the "Poliedra" UV supports a uniformly UV irradiation distribution, both on the surface and on the edges. In this way, with a single lamp, inclined with respect to the direction of advancement of the pieces, lamp length 1700 mm – 120 W/cm available lamp power from 40 to 120 W/cm type of lamps gallium and mercury (new lamps) Dodpfx Agemmbvte Decf

See details

Listing

Veneer splicing machine Fisher+Rueckle FZR-15+DAR-22

Kaunas

2,088 km

Veneer splicing machine
Fisher+RueckleFZR-15+DAR-22

Call

Condition: used, Year of construction: 2009, functionality: fully functional, Machines connected in one line (all three machines are only sold together). 1. Veneer crossfeed splicing machine Fisher+Rueckle FZR-15, year 2009 2. Direct Stacking Device Fisher+Rueckle DAR-22, year 2009 3. Scissor lifting table 1000 kg TECHNICAL DOCUMENTATION (full on request) Veneer Cross-feed Splicing Machine FURNIMASTER FZR-15 Veneer format length (longitudinal to the fibre) 350 - 1500 mm Veneer format width (transverse to the fibre) 50 - 500 mm Veneer strip thickness 0.3 - 1.5 mm Max machine output 30 cycles/min. (the output rates are related to an average veneer strip width of 100 mm transversely to the fibre) Connected load (basic machine): Power rate 13.5 kW Compressed air pressure 6 bar Power consumption: Electric power 6.2 kWh Compressed air supply 15 NL/min. Dimensions and weight (basic machine): 2940 mm L x 1000 mm W x 1530 mm H. 3200 kg Stacking device DA-2200 Veneer format length (longitudinal to the fibre) 600 * - 1500 mm Veneer format width (transverse to the fibre) 500 * - 2200 mm Maximum stacking width for output on the - right-hand side 2200 mm - left-hand side 2200 mm - back 1500 mm Stacking height max. 500 mm Power consumption from FZR-15 Dedpfx Agjt Akcfs Djcf Weight 1200 kg Lifting table 2500 mm L x 1200 mm W. 1000 kg

See details

Listing

Costa S Series Sander COSTA LEVIGATRICI Serie S

Motta di Livenza

1,719 km

Costa S Series Sander
COSTA LEVIGATRICI Serie S

Call

Condition: excellent (used), COSTA LEVIGATORS Series S model SN 5-groups first group electronic sectioned transverse belt second group 1 roller third group 1 roller fourth group electronic sectioned pad super finisher Dsdpfx Aer Iyvmeg Djcf fifth group electronic sectioned transverse belt machine width 1350 vacuum inverter on all belt groups inverter on belt outfeed brush group blower group on outlet

See details

Listing

Thin cut Frame saw with moulding heads NEVA TR88 Orbit Plus

Kežmarok

2,038 km

Thin cut Frame saw with moulding heads
NEVATR88 Orbit Plus

€24,000

Fixed price plus VAT

Call

Condition: excellent (used), Year of construction: 2005, I sell the thin cutting mini frame saw gatter NEVA TR88 Orbit plus, year 2005. Configuration with top + bottom moulding heads 1,5 + 1,5 KW suitable for later lamellas gluing Main motor 15 KW Working height 270mm Digital working height adjustment w. ELGO Electric Positioner Digital feedign speed adjustment w.MKS Total weight 2800kg. Dcjdpfx Aoiuc Scog Def Lot extras, saw leafs, adjustment elements and frame adjustment device indluded. Very good condition. Fully working. Made in Czech republic.

See details

Listing

Hessisch Oldendorf

1,186 km

Drum Chipper
MS-MaschinenbauTHK-540

Year of construction: 2024, condition: new, - Chopping height 240 mm - chopping width 540 mm - chopping length approx. 25-35 mm - Number of chopping knives 2 Dcodpfx Agenyidbj Djf - rotor diameter 600 mm - rotor speed 590 rpm - feed motors 4 + 3 KW - main motor 45 KW / 55KW / 75 KW - 6.000 mm infeed conveyor belt - 2.000 mm conveyor belt underneath the machine

See details

Advertise here