Used turning automatic lathes for sale (183)

Condition: new, turning diameter over bed 400 mm turning diameter over slide rest 280 mm turning length 1000 mm turning speeds 70 - 2000 U/min centre height 195 mm spindle bore 54 mm tailstock quill taper MT 3 MK connected load frequency 400 V total power requirement 2,2 kW weight of the machine ca. 0.85 t dimensions of the machine ca. 1,95 x 1,0 x 1,75 m Professional industrial machine 3-axis digital display 3-jaw chuck 200 mm. 4-jaw chuck 200 mm. Faceplate 280mm Bezel fixed Crjdpfx Aqjp U Ut Asvji Bezel rotating 4-fold steel holder. Halogen machine light Machine light Foot brake removable chip tray, chip protection wall Hardened and ground bed rails Complete coolant system Feed protection Machine feet Machine tool

Condition: ready for operation (used), Year of construction: 2000, functionality: fully functional, machine/vehicle number: P10243, turning length: 200 mm, spindle speed (max.): 12,000 rpm, counter spindle speed (max.): 10,000 rpm, number of axes: 7, Equipment: bar feeder, TECHNICAL DETAILS Max. bar diameter: 12 mm Max. turning length: 200 mm Main spindle speed: 12,000 rpm Spindle power: 2.2 kW Crodpeywu Abjfx Aqvsi Counter spindle speed: 10,000 rpm Number of axes: 7 MACHINE DETAILS Control: CNC Cincom / Mitsubishi M6 Machine weight: 2,580 kg EQUIPMENT C-axis LNS Express 332 bar feeder (year of manufacture 2009) Bushings for the LNS bar feeder in various diameters Guide bushings Driven tools: milling, drilling, thread cutting possible Set of fixed tool holders Large set of guide bushings (GB)

Condition: ready for operation (used), Year of construction: 1999, operating hours: 78,000 h, functionality: fully functional, turning length: 205 mm, spindle speed (max.): 10,000 rpm, bar diameter (max.): 20 mm, controller model: Fanuc 16i-T, number of axes: 9, CNC sliding headstock lathe with 9 axes! TECHNICAL DETAILS Axes: X / C1 / Y / E / B / A / X / C2 Maximum bar diameter: 20 mm Maximum turning length: 205 mm / 195 mm Maximum main spindle speed: 10,000 rpm Maximum sub-spindle speed: 10,000 rpm MACHINE DETAILS Control: Fanuc 16i-T Coolant: Oil Tank capacity: 170 L Operating hours: 78,000 h EQUIPMENT 4-position tool holder 3 cross drilling units Turret with 8 stations Various additional tool holders Tailstocks Parts conveyor Bar feeder FMB Turbo 3-26 /3200/A Cjdox U Af Sspfx Aqveri Fire extinguishing system Kraft & Bauer Chip conveyor Mayfran

Condition: new, K’MX EVO with 7 axes has been designed for machining of parts from Ø 3 to Ø 32 mm. The highlight of this series is 2 oil-cooled electrospindles (built-in motor), with a power output of 10.5 kW on the main spindle. The stroke of the spindle is up to 400 mm. The two separate tools racks can simultaneously machining (ex roughing and finishing). Crsdeunr H Aspfx Aqvoi The two separate tools racks can simultaneously machining (ex roughing and finishing). Optionally, both linear slides are equipped with driven tools to perform simultaneous drilling and milling. These 2 tools racks are complemented by end working attachment for internal operations with the possibility to turn simultaneously on the main and sub-spindle. In optional, possibility to mill thanks to ddriven tools. The large space permits better chip evacuation and maximum accessibility. - Rigid - Large working space - Up to 4 simultaneous cutting tools in contact - 2 independent racks with 5 positions

Condition: new, turning diameter over bed 360 mm turning diameter over slide rest 220 mm turning length 1000 mm turning diameter in the gap 380 mm turning speeds 70 - 2000 U/min centre height 180 mm spindle bore 50 mm tailstock quill taper MT 3 MK connected load frequency 230 oder 400 V total power requirement 1,8 kW weight of the machine ca. 0.65 t dimensions of the machine ca. 2,0 x 0,8 x 1,56 m Professional industrial machine 3-axis digital display 3-jaw chuck 180 mm. 4-jaw chuck 200 mm. Faceplate 280mm Bezel fixed Bezel rotating Crjdpfx Aoupxucsqvoi 4-fold steel holder. Halogen machine light Machine light Foot brake removable chip tray, chip protection wall Hardened and ground bed rails Complete coolant system Feed protection Machine tools

Condition: new, Year of construction: 2025, The machine on offer is a new stock machine. We will be happy to provide you with a suitable quotation. Crodpfx Asychtpoqvsi

Condition: new, Year of construction: 2023, A machine directly from the Hanwha authorized dealer HB TURNKEY (Hanwha Germany): Hanwha CNC turning center XD10 with Fanuc 0i series control (comparable to Star SR-10J) MAIN SPINDLE - Maximum turning diameter: 10mm - Max. spindle bore diameter: 10mm - Maximum speed [rpm]: 15,000 - Maximum power [kW]: 3.7 BUILT-IN MOTOR - C-axis with 0.001° - Z1 travel [mm]: 155 - Synchronously rotating guide bushing unit - Type of guide bushing: SD125 R - Type of collet: 1212 E TAILSTOCK - Maximum speed [rpm]: 10,000 - Maximum power [kW]: 1.1 - C-axis with 0.001° - Maximum bar diameter [mm]: 10 - Max. part length, push-out in front: - Z2 travel [mm]: 180 - Type of collet: 1212E TOOLING OPTIONS Tool slide X1, Y1: - Tool holder plate for 5 external turning tools 8x8mm Cross drilling/milling unit: - Number: 4 driven drilling/milling spindles, ER11 - Power: [kW]: 0.55, S6000 - Front drilling attachment for 4 drill sleeves - ER11 REAR END PROCESSING - Tool carrier for 4 tools - 2 driven drilling/milling spindles ER11 modular - 2 fixed drilling/milling spindles ER11 modular AXES AND CONNECTED LOAD Number of servo axes: 6 Number of spindle axes: 2 Rapid traverse m/min: 32m/min (Z1, Z2, Y, X2); 24m/min (X1) Connected load [kW]: 12KVA CONTROL Control type: Hanwha Fanuc 0iTF series Number of axes: 6 (X1, Z1, Y1, Y2, X2, Z2, X2) Simultaneous 4-axis control External operating panel with handwheel 9.5" color LCD/MDI monitor Automatic power-off function Program verification function (test run possible via handwheel) Continuous thread cutting cycle Runtime display / part counter CF card interface Tool radius compensation Absolute reference point Self-diagnosis function Interface to bar feeder ACCESSORIES Leveling feet with leveling elements Part conveyor with collecting tray Toolbox and service tool set Work area light Signal lamp (3-color) Safety door switch with locking Maintenance and central lubrication unit (1.8 liters lubricant volume) Coolant flow monitoring Coolant tank 140 L Pneumatic blow-out device for tailstock collet Manual and documentation in German and English Cedpfx Aqsgq Ravevjri (Maintenance and operating manual incl. parameter list and test protocol) - READY FOR IMMEDIATE USE - We will gladly calculate and optimize the cycle time for you and set up your newly acquired machine in our facility. WE FIND A SOLUTION - Whether standard or HB-modified.

Condition: new, Year of construction: 2024, Equipment: documentation/manual, MAIN SPINDLE Maximum turning diameter: 38 mm Max. spindle bore diameter: 40 mm Maximum speed [rpm]: 6,500 Maximum power [kW]: 23 (76 Nm) C-axis with 0.001° Stroke Z1 [mm]: Long-bed lathe version 320 mm, Short-bed lathe version 120 mm Synchronously rotating guide bushing unit Type of guide bushing: BRA 42 (FBritsch) Type of chuck: 173E TAILSTOCK Maximum speed [rpm]: 6,500 Maximum power [kW]: 23 (76 Nm) Maximum workpiece diameter [mm]: 38 Max. workpiece length, push-out forward [mm]: 90 C-axis with 0.001° Stroke Z2 [mm]: 350 Type of chuck: 171E / 173 E TOOLING OPTIONS Tool slide X1, Y1: - Tool holder plate for 5 external turning tools 2x20x20mm, 3x 16x16 Cross drilling / milling unit: - Number: 5 driven drilling/milling spindles 3 x ER16 + 2 x ER20 - Power: [kW]: 2.13 (S6000) - Front drilling unit for 5 drilling spindles, diameter 32 mm --> not applicable with option B-axis 6 AGW!!! Cross slide tailstock - optional deep hole drilling adapter - 2 driven drilling/milling spindles ER16 modular Rear-end machining Y2 axis - 4 driven drilling/milling spindles ER16 modular (S6000) kW=1.02 - 4 fixed drilling/milling spindles ER16 modular - Option 8 driven drilling/milling spindles ER16 modular AXES AND CONNECTED LOAD Number of servo axes: 6 Number of spindle axes: 2 Rapid traverse rate m/min: 32 m/min (Z1, Z2, Y, X2, Y2); 24 m/min (X1) Connected load [kW]: 40kVA CONTROL Control type: Siemens 828 D SL Number of axes: 6 (X1, Z1, Y1, X2, Z2, Y2) Simultaneous 4-axis control External control panel with handwheel 10.4" color monitor LCD/MDI Automatic PowerOff function Program check function (test run via handwheel possible) Continuous threading cycle Runtime display / part counter CF card interface Tool radius compensation Crodpfx Aj Ah Dtdoqvoi Absolute reference point Self-diagnosis function ACCESSORIES Leveling feet with leveling elements Toolbox and service tool set LED work area light Signal lamp (3-color) Safety door switch with interlock Maintenance and central lubrication unit (1.8 liter lubricant volume) Coolant flow monitoring Pneumatic blowing device for tailstock chuck Manual and documentation in German and English (Maintenance and operating instructions incl. parameter list and test report) Convertible to short-bed lathe incl. deep drilling unit max. drilling length 300 mm. The deep drilling unit has a separate motor max. 6,000 rpm.