Automatic lathe
HANWHA XD10-Y2

Name: HANWHA XD10-Y2
Brand: HANWHA
Availability: InStock

Year of construction

2023

Condition

New

Location

Immendingen Germany

Machine data

Machine type:: Automatic lathe

Manufacturer:: HANWHA

Model:: XD10-Y2

Year of construction:: 2023

Condition:: new

Price & Location

Location:: Am Freizeitzentrum 6, 78194 Immendingen, Deutschland

Call

Details about the offer

Listing ID:: A5697553

Update:: 05.02.2025

Description

A machine directly from the Hanwha authorized dealer HB TURNKEY (Hanwha Germany):

Hanwha CNC turning center XD10 with Fanuc 0i series control (comparable to Star SR-10J)

MAIN SPINDLE
- Maximum turning diameter: 10mm
- Max. spindle bore diameter: 10mm
- Maximum speed [rpm]: 15,000
- Maximum power [kW]: 3.7 BUILT-IN MOTOR
- C-axis with 0.001°
- Z1 travel [mm]: 155
- Synchronously rotating guide bushing unit
- Type of guide bushing: SD125 R
- Type of collet: 1212 E

TAILSTOCK
- Maximum speed [rpm]: 10,000
- Maximum power [kW]: 1.1
- C-axis with 0.001°
- Maximum bar diameter [mm]: 10
- Max. part length, push-out in front:
- Z2 travel [mm]: 180
- Type of collet: 1212E

TOOLING OPTIONS
Tool slide X1, Y1:
- Tool holder plate for 5 external turning tools 8x8mm

Cross drilling/milling unit:
- Number: 4 driven drilling/milling spindles, ER11
- Power: [kW]: 0.55, S6000
- Front drilling attachment for 4 drill sleeves - ER11

REAR END PROCESSING
- Tool carrier for 4 tools
Csdpfegq Ravex Agkeha
- 2 driven drilling/milling spindles ER11 modular
- 2 fixed drilling/milling spindles ER11 modular

AXES AND CONNECTED LOAD
Number of servo axes: 6
Number of spindle axes: 2
Rapid traverse m/min: 32m/min (Z1, Z2, Y, X2); 24m/min (X1)
Connected load [kW]: 12KVA

CONTROL
Control type: Hanwha Fanuc 0iTF series
Number of axes: 6 (X1, Z1, Y1, Y2, X2, Z2, X2)
Simultaneous 4-axis control
External operating panel with handwheel
9.5" color LCD/MDI monitor
Automatic power-off function
Program verification function (test run possible via handwheel)
Continuous thread cutting cycle
Runtime display / part counter
CF card interface
Tool radius compensation
Absolute reference point
Self-diagnosis function
Interface to bar feeder

ACCESSORIES
Leveling feet with leveling elements
Part conveyor with collecting tray
Toolbox and service tool set
Work area light
Signal lamp (3-color)
Safety door switch with locking
Maintenance and central lubrication unit (1.8 liters
lubricant volume)
Coolant flow monitoring
Coolant tank 140 L
Pneumatic blow-out device for tailstock collet
Manual and documentation in German and English
(Maintenance and operating manual incl. parameter list and test protocol)

- READY FOR IMMEDIATE USE -
We will gladly calculate and optimize the cycle time for you and set up your newly acquired machine in our facility.

WE FIND A SOLUTION - Whether standard or HB-modified.

The listing was translated automatically. Translation errors are possible.

Documents

5697553-01.pdf

Seller

Registered since: 2018

9 listings online

Call

Send inquiry

Telephone & Fax

+49 7462 ... show

Fax:

These listings may also fit your interest.

Listing

Zuchwil

1,314 km

Automatic lathe
STAR MicronicsECAS 12

Call

Condition: excellent (used), Year of construction: 2007, STAR ECAS 12 CNC Swiss-type lathe TECHNICAL DATA Maximum machining diameter: 13mm Max. headstock stroke: 205 mm Maximum drilling capability: Stationary tool: 10 mm Power driven tool: 8 mm Maximum tapping capability: Stationary tool: M8 x P 1.25 Power driven tool: M6 X P1.0 Maximum milling capability: 10mm Maximum die cutting capability: M8 x P1.25 Maximum slotting capability: 1.5 x 4 mm Feed rate: Z1, X1, Y1, Z2, X2, Z3, X3, Y3: 18,000 mm/min C1, C2: 194,400°/min Maximum turning feed rate: Z1, X1, Y1, Z2, X2, Z3, X3, Y3: 18,000 mm/min C1, C2: 194,400°/min Minimum input increment: X1, X2, X3: 0.001 mm Z1, Z2, Z3, Y1, Y3: 0.001 mm C1, C2: 0.001° Spindle speed: 12,000 rpm Indexing angle: 0.01° Dimensions: 2588 x 1150 x 1765 mm Center height: 1040 mm Weight: 3500 kg SCOPE OF OFFER INCLUDES (list not exhaustive): Star Ecas 12 CNC lathe Coolant tank / pump High-pressure system Transformer Operating documentation Exact scope of offer as shown in the photo gallery Cjdpfowf Acljx Agkeha No liability is assumed for the accuracy, completeness, or timeliness of the information.

See details

Listing

Germany

1,192 km

TRAUB TNL 32
TRAUBTNL 32

Call

Condition: ready for operation (used), Year of construction: 2014, spindle speed (max.): 8,000 rpm, number of axes: 9, This 9-axis TRAUB TNL 32 swiss type turning machine was manufactured in 2014. It features a TX8i-s control with a 64-bit RISC CNC/PLC processor, color TFT display, and electronic handwheel. The main spindle supports a 32 mm bore, and the machine includes a sub-spindle with a C-axis. It offers a dual-driven upper tool turret and a lower turret with nine tool holders. Consider the opportunity to buy this TRAUB TNL 32 swiss type turning machine. Contact us for more information. • Control: TRAUB TX8i-s CNC/PLC with 64-bit RISC processor and fiber-optic PC; color TFT flat-panel display; electronic handwheel • Software/extensions included: Polyform (C-axis programming), Helical (3D Y-axis interpolation), tapping without compensating chuck, parting tool breakage monitoring, parting tool ejection monitoring, axis shutdown, T-ATC • Main spindle: Motor spindle with hollow clamping system; 32 mm bore/bar capacity; C-axis max speed 8,000 rpm • Max stroke: 305 mm (L version) / 127 mm (K version) • Sub-spindle: Partial hollow clamping, C-axis; cleaning unit mounted on lower tool turret • Upper tool turret: X/Y/Z/H/B axes; 10 tool holders; dual drive • Lower tool turret: X/Y/Z/H axes; 9 tool holders; combined drive; separate counter-spindle operation • Measuring/feedback: Glass scales on X-axis (upper and lower turrets); rotary encoder on C-axis • Back working: 8-position back table with combined drive for up to 3 tools; prepared for internal coolant supply Chsdjx D Drcjpfx Agkoa • Clamping: Clamping direction reversal device and counter clamping pressure device on main and counter spindles • Coolant system: Standard system with 3-bar and 8-bar pumps (50 Hz) in a 500-liter tank; additional 28-bar pump (50 Hz), 19 l/min flow rate • Extraction: Connection D 150 mm for central extraction Additional equipment • None specified (no robots, bar feeder, chip conveyor, or external automation listed)

See details

Listing

Turning automatic lathe TAKAMAZ Japan XT-6 part loader

Coevorden

1,004 km

Turning automatic lathe
TAKAMAZ JapanXT-6 part loader

€73,500

Fixed price plus VAT

Call

Condition: new, Year of construction: 2022, functionality: fully functional, TAKAMAZ CNC Compact loader FC60 Lathe with automatic loader unloader quickest loading system in the world loading time new part 2,8 sec. loading cap. till 60 mm diameter. loading lenght max 50 mm max weight 1 kg per side loading feed 120 m min include part turning for loading Fanuc Control full warranty 2 year Lathe spec. Spindle motor 7,5/5,5 kw turning diameter max 180 mm turning lenght 240 mm bar cap. 35 mm collet chuck 173E till 40 mm diameter spindle nose A2-5 spindle speed 4500 rpm tool pos 8 stations tool shank 20x20 mm boring holder 25 mm diameter rapid speed X/Z 18/24 meter Chodpfom E I D Hjx Agkja machine dimension 1,36 x 1,37 meter height 1,7 meter weight 2,7 ton total power 14 KVA Price is EXW (Stock Europe), Include loaded on truck. Transport, installation, commissioning, training, and yearly service contracts are available upon request for an additional fee. Installation and training is always done by our high qualified Service team in 3 locations in Europe. Netherlands, Germany, Romania.

See details

Listing

VMC 330 x 300 x 250 with 40.000 Rpm Matsuura LX-O

Babberich

984 km

VMC 330 x 300 x 250 with 40.000 Rpm
MatsuuraLX-O

Call

Year of construction: 2002, condition: good (used), Make: Matsuura Type: LX-O Control: YASNAC Year: 2002 Specifications Metric US Standard X - Travel 330 mm Y - Travel 300 mm Z - Travel 250 mm Table Length 540 mm Table Width 320 mm Table load 100 Chsdpfxelz Rvlj Agkea Feed rate X-Axis 90000 mm/min. Feed rate Y-Axis 90000 mm/min. Feed rate Z-Axis 90000 mm/min. Spindle Taper 30 ISO/Bt/Mk Power on spindle 7.5 kW Speeds / ranges 40000 Rpm ATC / revolver 30 Chip conveyor Yes Dimensions (Estimate) Length 2800 mm Width 2600 mm Height 28000 mm Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

See details

Listing

Measuring system FARO FARO Quantum S max ScanArm

Best

948 km

Measuring system
FAROFARO Quantum S max ScanArm

€35,000

EXW Fixed price plus VAT

Call

Condition: like new (used), Year of construction: 2023, functionality: fully functional, input voltage: 230 V, bolt circle diameter: 1,000 mm, arm reach: 2,000 mm, Equipment: documentation/manual, A FARO measuring arm is used for precise, portable 3D measurements and quality control across various industries as it enhances the accuracy of traditional measuring methods, reduces errors, provides reliable data for decision-making, and increases efficiency through direct integration with computer-driven processes and software. Why use a FARO measuring arm? Accuracy and Precision: A FARO measuring arm delivers highly accurate 3D measurements, resulting in more consistent and reliable outcomes compared to manual methods. Portability: The arm is portable and can be easily transported and set up at different locations, allowing for flexibility within the measurement process. Chjdpfx Asw U Atbjgkoa Quality Control: Manufacturers use the measuring arm for 3D inspections, CAD comparisons, and dimensional analyses to verify and ensure product quality. Efficiency: By providing immediate, precise data, the measuring arm helps prevent errors, reduces rework, and streamlines production processes, leading to faster product delivery and higher customer satisfaction. Data for Decision-Making: The collected measurements provide dependable information that can be used for trend analysis and smarter decision-making by the team. Versatility: The measuring arm can be employed for diverse applications such as reverse engineering, tool certification, and inspection of complex geometries, making it a valuable tool in different production sectors.

See details

Listing

Flat die thread rolling machine EWM GW62

Wiefelstede

1,085 km

Flat die thread rolling machine
EWMGW62

€4,500

Fixed price plus VAT

Call

Condition: good (used), Flat-jaw thread rolling machine, thread rolling machine, segment thread rolling machine, cold forming machine, knurling machine, thread rolling machine -Manufacturer: EWM, flat jaw thread rolling machine knurling machine -Type: unfortunately without type designation -Drive: 4.6/5.8 kW 1435/2890 rpm -Belt drive: 3-way adjustable Csdpfxsi Eg Nks Agksha -Knurling plate: RAA 1.0 -Central lubrication: -Dimensions: 1680/920/H1440 mm -Weight: 1308 kg

See details

Listing

Bar Automatic Lathe - Multi Spindle SCHÜTTE AF51

Germany

1,088 km

Bar Automatic Lathe - Multi Spindle
SCHÜTTEAF51

Call

Condition: used, Year of construction: 1987, Technical details: number of spindles: 8 spindle passage: 51 mm Article: multi spindle automatic lathe Manufacturer: Schütte Type: AF51 Yob: 1987 eight main spindles max. bar diameter D=51mm control SIEMENS SIMATIC S5 pick up in pos. 7, for rear machining thread cutting drive independent feed in positions 2/3 electronical trip dog control “Balluff” clear text display Wöhrle Chjdsiay Sfjpfx Agkoa coolant pump magnetic cartridge filter oil running incl. bar loader IEMCA PRA 40/37/F, yob 1987, (bundle type) Painting in light blue and light grey The configuration of tooling will be different like pictures. Please, contact us for getting more information and pictures on mail(at) or *

See details

Listing

TUBE CHAMFERING MACHINE CNC SMS MEER CNC RFA 14

Barcice Rososkie

1,978 km

TUBE CHAMFERING MACHINE CNC
SMS MEER CNCRFA 14

Call

Year of construction: 2000, condition: excellent (used), SMS MEER CNC DOUBLE SIDED CHAMFERING MACHINE Manufacturer: SMS MEER Chjdpfx Aoghrguogksa Type: RFA 14 Yom: 2000 Working range: tube Ø 21,3 – 114,3 mm Wall thickness 2,3 - 11 mm Length: 6-12m Composed of two RFA14 chamfering machines with transport devices between the machines. The task of machines is to chamfer inside and outside both ends of the tubes. The range of diameters of chamfered tubes 21.3-114,3mm and wall thickness of 2.3-11mm in the length range of 6-12m. The task of transport in the area of the chamfering machines is to collect the tubes from the roller table and move them between the chamfering machines.

See details

Listing

Płachty

2,013 km

Traub TNL26K
TraubTNL26K

Call

Condition: good (used), Year of construction: 2005, operating hours: 32,870 h, functionality: fully functional, machine/vehicle number: 6030578, turning diameter: 32 mm, spindle speed (max.): 8,000 rpm, bar diameter (max.): 32 mm, We offer for sale Traub TNL26K automatic cnc lathe. Machine is connected to power and can be inpected every time by prior appointment. Year of built: 2005 Spindle passage 32mm Main spindle: 6.7/10.7kW; 8000rpm Counter spindle: 6.7/10.7kW; 8000rpm Upper turret: 12pos. 12x12/16x16, driven tools 2/5.5kW, 0-6000 rpm, 6.4/21 Nm Lower turret: 12pos. 12x12/16x16, driven tools 2/5.5kW, 0-6000 rpm, 6.4/21 Nm Connected load: 24kW Csdpfx Asvldx Aegkjha Barfeeder: FMB Turbo 5-42/4200mm Swarf conweyor: Knoll 240 S1/100 Coolant Kompaktbandfilter: Resy Machine is sold with a lot of toolholders not driven and driven - list on attached photo.

See details

Listing

Machining Center - Universal DECKEL MAHO DMU 80 monoBLOCK 1213

Oelde

1,122 km

Machining Center - Universal
DECKEL MAHODMU 80 monoBLOCK 1213

Call

Condition: used, Year of construction: 2006, x-travel 880 mm y-travel 630 mm z-travel 630 mm control iTNC 530 Heidenhain turning speed range - main spindle max. 18.000 min/-1 power capacity - main spindel 28 / 19 kW max. Torque 121 Nm tool taper HSK-A 63 swivellable B: +30° / -120 ° table surface area Ø 700 / 1.250 x 700 mm max. table load 650 kg rotatable C: 360 ° number of toolpositions 2x16 pos. tool taper HSK-A 63 max. tool diameter 80 mm max. tool-dia with free toolbox 130 mm max. tool weight 8,0 kg max. tool length 315 mm feed speeds max. 30.000 mm/min rapid traverse 30 m/min total power requirement 48 kVA weight of the machine ca. 14,0 t Codpfxeyackdj Agkoha dimensions of the machine ca. 4,5 x 4,0 x 2,6 m 5 Axis CNC - MachiningCenter Universal DECKEL MAHO - DMU 80 monoBLOCK - NC-Rotary Table (C-Achse) integrated in rigid-table - Swivel-Milling-Head (B-Achse)

See details

Advertise here

Automatic latheHANWHA XD10-Y2

Machine data

Price & Location

Details about the offer

Description

Documents

Seller

Send inquiry

Telephone & Fax

Automatic lathe
HANWHA XD10-Y2