Used thickness planer for sale (208)

Condition: excellent (used), TECHNICAL DATA - Shaft width 500mm - Number of knives: 4 - Maximum thickness of the workpiece: 230mm From above: - Ratchets - Toothed, pulling, sequential feed shaft - Pressure rollers - Planing shaft - Pressure roller Crsdpfx Aqsztzi Dsvei - Smooth, pulling discharge shaft From below: - Adjustable pulling rollers in the lower bed, 2 pcs - Motor: 5.5kW - Electric bed lifting - Bed lifting motor: 0.37kW - Smooth feed rate adjustment - Diameter of dust extraction nozzle: 150mm - Dimensions (L/W/H): 1000x1000x1350mm - Weight: 690kg ADVANTAGES - Electric bed lifting - 4-knife shaft - Pulling rollers in the lower bed - Used thickness planer, very good condition Net price: 16,900 PLN Net price: 3,930 EUR, depending on the exchange rate of 4.30 EUR (Prices are subject to change due to significant fluctuations)

Condition: excellent (used), CATALOGUE NUMBER 7172 TECHNICAL DATA - roller width 640mm - max. thickness of workpiece 230mm - 4-knife roller from top: - pawls - toothed feed roller, pull type - pressure roller - planing roller - pressure roller - smooth feed roller, pull type, metal - 2 adjustable sliding rollers at the bottom, mounted on the table - 5.5kW motor - electric table lifting, approx. 0.25kW - 2 feed speed types, 0.75kW - diameter of extraction nozzle 160mm - dimensions (L/W/H) 1320x1270x1380mm - weight 903kg ADVANTAGES - made in Germany - used thickness planer, very good condition Net price: 21900 PLN Crjdpfx Aqeztxmyevji Net price: 5093 EUR Net price calculated based on an exchange rate of 4.30 PLN/EUR (price may change if the exchange rate fluctuates significantly)

Condition: excellent (used), Catalog number 8116 TECHNICAL DATA - Shaft width: 500mm - Number of knives: 4 pcs - Max. thickness of workpiece: 230mm Cedpfx Aqez Nhriovsri * From top to bottom: - Ratchets - Toothed infeed roller, pulling, helical - Pressure roller - Planing roller - Pressure roller - Smooth outfeed roller, pulling - Motor: approx. 4kW - Manual table lifting - 2 feed speeds: 8/12.5 m/min - Diameter of dust extraction outlet: 130mm - Dimensions (L/W/H): 970x870x1300mm - Weight: 620kg ADVANTAGES – Made in Italy – Used thickness planer, very good condition Net price: 14900 PLN Net price: 3465 EUR, depending on the exchange rate of 4.20 EUR (Prices may vary due to significant exchange rate fluctuations)

Condition: excellent (used), Catalog number 7303 Cjdpfszxg S Ujx Aqveri TECHNICAL DATA - Shaft width 640mm - Number of knives 3 pcs - Max thickness of the workpiece 250mm From above: - Pawls - Toothed infeed shaft, pulling type - Pressure rollers - Planing shaft - Pressure rollers - Smooth outfeed shaft, pulling type From below: - Adjustable rollers in the lower bed, 2 pcs - Motor 7.5kW - Electric bed lifting - Lifting motor 0.75kW - 4 feed speed types - Feed motor 1.5kW - Diameter of the dust extraction nozzle 140mm - Dimensions L/W/H 1120x1250x1680mm - Weight 1033kg - Made in Poland - Used thickness planer, very good condition Original photos Net price: 19900 PLN Net price: 4628 EUR, depending on the exchange rate of 4.30 EUR (Prices may vary due to larger fluctuations)

Condition: used, Technical specifications: Max. planing width: 520 mm Max. planing height: 300 mm Cutterhead diameter: 110 mm Number of knives: 4 pcs Feed rate: 5/8/12/19 m/min Electric lifting Dust extraction port: 160 mm Power supply: 400 V Motor power: 5.5 kW Overall dimensions: Length: 1060 mm Width: 1050 mm Height: 1280 mm Crjdpfozvmlpex Aqvji

Condition: used, Year of construction: 2000, Motor: 7.5 kW Tersa cutterhead, Z = 4 2x sliding rollers in the thicknessing table, height-adjustable Steel feed roller, ribbed Csdpe Aay D Rsfx Aqveri Infeed roller before and after the thicknessing table Safety bar Cutterhead speed: 5000 rpm Planing height: 2.8 - 250 mm with digital display Planing width: 630 mm Max. chip removal: 8 mm Dust extraction port: 160 mm Weight: approx. 1115 kg Dimensions: 1140 x 1260 x 1200 mm Storage location: Nattheim

Condition: excellent (used), Catalog number: 6815 TECHNICAL DATA - shaft width 640mm - number of knives: 4 pcs - max thickness of workpiece: 230mm Top: - toothed infeed shaft, pulling, sequential - pressure rollers - planing shaft - pressure rollers - smooth outfeed shaft, pulling Bottom: - roller + infeed table - adjustable roller in the lower table - outfeed table + roller - motor 5.5kW - stepless feed speed adjustment - feed motor 0.5kW - diameter of dust extraction nozzle: 150mm - dimensions L/W/H: 1630x1630x1140mm - weight 920kg ADVANTAGES – Made in Italy – Used thickness planer, very good condition Net price: 17,900 PLN Net price: 4,163 EUR Csdpfeztxbdox Aqveri Net price calculated based on an exchange rate of 4.30 PLN/EUR (in case of significant exchange rate fluctuations, the price may change)

Condition: good (used), Griggio PSA 530 - Planing width: 53 cm - Electric table lifting - 4 Tersa knives - 4 feed speeds on the gearbox Crodezv T Azepfx Aqvji The machine is in very good condition and operates smoothly and quietly.

Condition: used, Bäuerle DM63 thickness planer for the precise thickness machining of solid timber and wood-based materials. The machine is suitable for use in joinery workshops and industrial settings, and its robust construction ensures low-vibration, dimensionally accurate planing. Ideal for the uniform calibration of workpieces in both batch and custom production, fitted with a Leitz CentroFix reversible-blade planing shaft. Includes original shaft for strip planing blades Technical data: - Working width: 630 Codpfx Aezrxz Ieqveri - Clearance height: 220 - Feed rate: 7 / 9 / 14 / 18 m/min - Blades: CentroFix Z4

Condition: excellent (used), CATALOGUE NUMBER 7618 TECHNICAL DATA - Shaft width: 500mm - Number of knives: 4 pcs - Max. thickness of workpiece: 230mm From above: - Pawls - Toothed, pulling, twisting, sequential infeed shaft - Pressure rollers - Surfacing shaft - Pressure roller - Smooth, pulling outfeed shaft From below: - 2 sliding rollers on the table Cedpfx Aqeztxdfjveri - Motor: 5.5kW - Manual table lifting - 2 feed speed settings: 7.5; 13 m/min - Diameter of dust extraction port: 160mm - Dimensions (L/W/H): 1100x1000x1200mm - Weight: 600kg ADVANTAGES - Made in Italy - Unpainted - Used thicknesser, very good condition Net price: 15900 PLN Net price: 3698 EUR, depending on the exchange rate of 4.30 EUR (Prices are subject to change due to exchange rate fluctuations)

Condition: like new (used), Year of construction: 2004, I sell the industrial thicknessing machine LEDINEK ROTOLES 400 D. Machine year 2004. Max. working width 400mm Max. working height 2-150mm Min. element length 150mm Max. construction cutting take-out 8mm Rotation Spindle head 34-knives Variable feeding speed 10-30 m/min. Working thickness motirical adjustable with digital readout. Dust extraction hose diameter 200mm (30m/sec. required). Main spindle motor 15,0KW. Feed motor 3,0 KW. Credpfowlkmxex Aqvsi Total power 18 KW. Total weight 1800kg. European product, made in EU, with CE certificate and instruction manuals. Machine in stock in Kežmarok, Slovakia, possibility to test.

Condition: used, Second-hand PANHANS Type 436 thickness planer for professional use in woodworking. Technical data: Crsdpfxszrx D Nj Aqvji - Working width: 630 mm - Blade: Tersa Z4 - Planing height: 300 mm - Weight: 700 kg

Condition: as good as new (ex-display), Year of construction: 2025, functionality: fully functional, power: 7.5 kW (10.20 HP), input voltage: 400 V, input current: 20 A, input frequency: 50 Hz, type of input current: three-phase, planing width: 630 mm, tool diameter: 125 mm, number of blades: 4, actuation type: electric, rotational speed (max.): 5,000 rpm, total length of planing tables: 1,260 mm, total width: 1,280 mm, total height: 1,220 mm, overall weight: 1,200 kg, Equipment: CE marking, documentation/manual, • Operation: 1-axis control for planing dimensions, max. 99 values can be stored, 49 of which can be used for a freely programmable planing sequence. • Buttons for manual quick and fine adjustment of the planing thickness according to the digital display. • Push buttons for starting and stopping the cutterhead. • Integrated operating hour counter. • TERSA all-steel cutterhead with 4 knives. • 2nd rubber feed roller, 85 mm, complete. • Thickness table extension, foldable, 630 x 450 mm. • Thickness table: Electric thickness table adjustment with fine adjustment, feed speed 10 mm/s, mounted on 4 support spindles to ensure stability, table surface finely planed. • Feed: 2 speeds 6 / 12 m/min, electrically selectable even during planing, large rubber feed rollers Ø 85 mm to compensate for varying wood thicknesses, rubber rollers are material-friendly and self-cleaning, easy roller replacement; articulated pressure bar at the infeed. • Extraction: High-pivoting, divided hood with chip extraction connection Ø 160 mm, can be connected on the left or right (on both sides in special cases), minimum extraction air volume: 27 m³/min. at 20 m/s. Crsdpfx Ajzvfm Ejqvsi • Maintenance: Central lubrication strip for oil lubrication points; lubrication of bearings/cutterhead via grease nipples. • Weight: approx. 1,200 – 1,400 kg • Workpiece length min. 270 mm.

Condition: used, Bäuerle Type 125/02 heavy-duty thickness planer for the precise sizing (thickness planing) of solid timber and wood-based materials. The robust construction and powerful drive ensure consistent planing results and a long service life. Accessories included. Technical data: - Planing width: 610 mm - Planing height: 200 mm - Planing shaft: Z4 strip planing blades - Feed speed: 7–14 m/min - Motor power: 4.4 kW Cedpfx Aszrxznsqvsri - Weight: approx. 1,150 kg

Condition: excellent (used), functionality: fully functional, planing width: 500 mm, number of blades: 4, total width: 1,700 mm, total height: 1,800 mm, overall weight: 2,000 kg, total length: 2,200 mm, chip removal: 160 mm, extraction connection diameter: 160 mm, height adjustment type: electric, number of feed rollers: 3, number of planer blades: 3, pass-through height: 200 mm, planing height: 200 mm, table width: 500 mm, working height: 200 mm, Four-sided planer made in Czech Republic with adjustable spindles and segmented shaft. MACHINE FULLY OPERATIONAL AFTER INSPECTION. TECHNICAL PARAMETERS: -planing width 500 mm -planing height on both sides 200 mm -planing height on four sides 140 mm (possibility of mounting larger heads up to 200 mm -- planing) -spindle diameter 40 mm -max. tool diameter 200 mm -4 knife shafts -horizontal shaft motor power 2 x 7.5 kW -spindle motor power 2 x 4 kW -feed motor power 0.78 kW -electric height adjustment -feed speed smoothly adjustable -3 rollers in the table -two upper segmented pulling shafts -smooth receiving pulling shaft -guiding ruler -connector diameter 2 x 160 mm MACHINE DIMENSIONS: - length: 2200 mm Crodpewfihuefx Aqvoi - width: 1700 mm - height: 1800 mm - weight ~ 2000 kg Possibility of financing the machine through leasing or installments. Just visit our website: jbsmaszyny.pl I invite you to test the machine. Where can you see our machines? JBS WOODWORKING MACHINES WOLICA DRUGA 26 23-310 MODLIBORZYCE Transport of machines all over the world!

Condition: used, Year of construction: 1962, Used Machine Crsdjzk Nnijpfx Aqvei Year of manufacture: 1962 Features and Technical Specifications: - Planing width: 630 mm - Working height: 250 mm - Table length: 1100 mm - Dust extraction port: 160 mm - Blades: 4 strip planer blades - The machine does not have a motor brake! Availability: available immediately Location: Röllbach

Condition: excellent (used), Year of construction: 1981, machine/vehicle number: V 117812, input voltage: 380 V, input current: 11 A, Machine is in very good condition - Electric height adjustment and handwheel adjustment - Newly fitted bearings - New knives installed - Gearbox lubricated - New protective lamellae installed - Planing width: 630 mm - Planing height: 250 mm - Feed speed: 8–20 m/min - Extraction nozzle: 160 mm - Weight approx. 870 kg - Rubber-coated infeed and outfeed rollers - Two-knife cutterblock with strip planing knives Credpfx Asyt Nx Ujqvji - Central lubrication - Star-delta switch

Condition: good (used), Jaroma Thicknesser Max. planing width: 530mm, Max. planing height: 200mm, 2 feed speeds, 3 conventional knives (wedge-type), Crsdpfjztaktsx Aqvji Electric table adjustment (up-down). 2 rollers in the table. 7.5KW motor 130mm dust extraction port Machine ready for operation.

Condition: used, Year of construction: 1997, functionality: fully functional, Ledinek Planer Superles 400-4V+4F Working width max: 450mm Credpfs Af Apysx Aqvji Jointer cutterhead: 30kw Thicknessing cutterhead: 37kw Vertical cutterhead left: 15kw Vertical cutterhead right: 15kw Chamfering: 4x1.5kw Feed: 15kw Feed drive motor: 1.5kw Feed speed: 8-40m/min

Condition: excellent (used), functionality: fully functional, overall weight: 1,400 kg, Olma precision thickness planer, 630 mm, 4-knife cutterhead, electric thickness table adjustment. Cjdpfx Aqez Hzv Ievsri

Condition: ready for operation (used), Year of construction: 1999, SCM S630 Thickness Planer Crjdpfx Aozlwxfoqvsi Max. planing width: 630 mm, Max. planing height: 300 mm, 4 cutterblocks electric height adjustment, infinitely variable feed speed, electronic height display with digital readout 2 rubber feed rollers 5.5 kW motor with brake CE compliant Price: 5500.-

Condition: excellent (used), Planer width 510 mm Min/Max. working height 3 - 240 mm Motor power 4.0 kW, 400 V, 50 Hz Speed of planing shaft 4500 rpm Diameter of planing shaft 120 mm Planer knives 4 pcs Dimensions of thickness table 510 x 850 mm Feed speed 6.5 / 10 / 13 / 17 m/min Dust extraction diameter 120 mm Electric height adjustment Handwheel for fine adjustment of thickness table height Articulated pressure bar 2 pcs under-table rollers Low-voltage release Emergency stop switch Knife setting gauge Test report for conformity with Section 4 of the Machinery Ordinance 1 set of spare planer knives Dimensions approx. L x W x H = 1000 x 900 x 1450 mm Weight approx. 900 kg Note regarding used machines: • Subject to errors in technical specifications and prior sale. • Stated prices are ex-works and include free loading. • The machine has been cleaned and function-tested. • All machines are sold as seen, without any warranty claims. The buyer is free to inspect the machines at the location. • Special agreements are only possible in writing. Csdj Aaw H Nepfx Aqvori (We will only answer inquiries if you provide your address and telephone number!)

Condition: repair required (used), Thickness planer Manufacturer: SCM Model: S63 B Year of construction: N.A. Cjdpoyh Ut Refx Aqvori Working width: 630 mm Max. workpiece height: 240 mm Min. workpiece height: 3 mm Max. stock removal: 8 mm Table size: 630 x 1,000 mm Power: 5.5 kW Knife type: Tersa Number of knives: 4 Outfeed roller: Steel 1x table roller, driven Height adjustment: Electric - Manual Feed speed: 6 - 18 m/min; infinitely variable Speed: 4,500 rpm Dimensions: 1,250 x 1,050 x 805 mm Weight: 825 kg

Condition: good (used), Year of construction: 1996, functionality: fully functional, planing width: 630 mm, overall weight: 1,000 kg, planing height: 230 mm, Kölle thickness planer DH63 with V-bar knife shaft, 4 knives, Electric table height adjustment with fine adjustment via handwheel, planing height 230mm, 3 feed speeds 4, 6, 12m/min, steel feed roller and rubber feed roller, motor brake, Machine with soundproof hood/low noise. Cjdpovluwpofx Aqvori The machine is in very good condition considering its age, ready for immediate use.

Condition: good (used), Code: 0503 Brand: SAC - ITALY Model: RS 53 - CE Standard Automatic thickness planer for joinery workshops, furniture factories, custom furniture, sawmills, wood, composite materials, plastics - CE Standard Technical data Working width mm 530 Max working height mm 240 Min working height mm 3 Max depth of cut mm 8 N° 4 knives Feed speed mt/min 5 - 7,5 - 10 - 15 Motor Hp 5,5 Diameter of suction connection mm 140 Overall dimensions mm 930 x 1050 x 1100 h Codpfxj Aa Ayzj Aqveri Weight kg 970