Used Scrap shears for sale (23)

Condition: repair required (used), Year of construction: 2007, Functionality: limited functionality, cutting force: 950 t, Necessary repair: 1x pump needs to be replaced TECHNICAL DETAILS Qbfu9Cx0G Diesel engine: Deutz

Condition: used, Year of construction: 1996, Functionality: fully functional, cutting force: 900 t, net weight: 290,000 kg, Used Leimbach HS900 heavy duty scrap shear currently undergoing a full refurbishment at our factory UK. Approximately 4 months delivery to perform full refurbishment. Contact us to discuss this machine further. 900T cutting force 375T hold down force 300T lid force 600T side compression force 200T pusher force 6.6m x 2.3m charging box 4 x 90kW + 1 x 22kW electric motors Weight - 290T C93Gqiq

Condition: excellent (used), Functionality: fully functional, It is a scrap shear in very good used condition. Dqrf27 The machine is available immediately.

Condition: refurbished (used), Year of construction: 2006, operating hours: 100 h, Functionality: fully functional, cutting force: 550 t, power: 169.16 kW (229.99 HP), Sierra 550 T 550 SL Pre-compression 100 t 230 hp Cummins 6-cylinder turbodiesel Shearing capacity - 7 cuts per minute with empty cutterbar 4 cuts per minute with 24-inch cuts Shearing capacity - 12-16 tons per hour Bale size - 32" x 24" x variable Bale weight - average 900 pounds Bale output - 10-13 tons per hour Package size - Dqngal 32" x 24" x variable

Condition: refurbished (used), Year of construction: 2010, cutting force: 700 t, power: 220.65 kW (300.00 HP), A fully refurbished 2010 Louritex 700t shear balers. The machine was serviced by our team with original parts only until we bought it back from the customer for refurbishment and sale (customer got a new machine). We have been a verified Louritex agent for over 20 years, all our refurbished machines are renovated using only certified original parts by a team of highly trained Louritex servicing team. This shear baler will be ready for transport beginning of November 2024. D7V0Pdw The machine can be viewed in our site in Czestochowa, Poland.

Condition: used, Year of construction: 1995, Functionality: limited functionality, cutting force: 800 t, net weight: 190,000 kg, type of input current: three-phase, Arnold HS850 Scrap & Metal Presse Die Maschine befindet sich derzeit in transportbereitem Zustand. master cylinder cylinder force: 850 t press: 0.08m/s hold-down cylinder cylinder force: 100t / per cylinder feed cylinder: cylinder force:100t cover cylinder: cylinder force:100t main dimensions total length:16175mm total width:5200 total height: 6420 mm Ccmbdrxtop Dimensions: Passage width at the scissor stand: 800mm passage height at the scissor stand: 800mm total height: 6000mm weights: scissor stand with cutter bar: 60 ton feed device approx: 85 ton total weight: about 170 tons required amount of oil: 5200 liters connection value of the machine: 220kw If you need more information. We are here to help! Please contact us using the contact form or give us a call Your ad has been automatically translated. Translation errors are possible.

Condition: like new (used), Year of construction: 2022, operating hours: 1,673 h, Functionality: fully functional, total width: 2,590 mm, total length: 5,580 mm, Sales description: For sale is a ZDAS CNS400K impact shear as good as new, built in 2022, with only 1673 operating hours. The machine is in excellent condition and offers a maximum nominal force of 4000 kN. Bo2Sqs0P Technical data: - Dimensions: 2590 x 5580 x 2705 mm - Weight: 25,000 kg - Maximum stroke of the blade carriages: 800 mm - Operating speed: 80 mm/s - Operating voltage: 24V, with a power consumption of 96 KVA - Hydraulic system: Operating pressure 108 l/min, operating temperature 10-60°C Price subject to negotiation - please send us your offer! Please do not hesitate to contact us if you have any questions or would like to arrange a viewing.

Condition: good (used), Year of construction: 2004, operating hours: 23,700 h, Functionality: fully functional, cutting force: 960 t, power: 4 kW (5.44 HP), net weight: 275 kg, Good condition Used Leimbach HS960 high capacity side compression scrap shear. We are the UK Leimbach agents and have serivced, maintained this machine since its purchase from us. Available ex site immidiately. Gpfzec Can be seen running. Contact us with price requests or dismantling and installation costs.

Condition: good (used), Year of construction: 2001, operating hours: 10,000 h, Functionality: fully functional, machine/vehicle number: 833/01, It is a scrap shear, make 2001 SCS. Dqjt8B Machine is immediately available ex location (Munich) and can be inspected at any time during the run. Please contact me if you are interested.

Condition: good (used), Year of construction: 2021, operating hours: 4,200 h, Functionality: fully functional, machine/vehicle number: 1267, EQUIPMENT IN VERY GOOD WORKING ORDER Qeccgnn

Condition: good (used), Year of construction: 2002, operating hours: 12,895 h, Functionality: fully functional, machine/vehicle number: cm839, cutting force: 1,000 t, power: 294.2 kW (400.00 HP), net weight: 35,000 kg, total width: 2,490 mm, total length: 7,000 mm, total height: 3,000 mm, overall weight: 35,000 kg, Inclined shear SCS CM 1000 Year 2002 Nkwo2Bh Purchased and refurbished in 2014

Condition: excellent (used), Year of construction: 2023, operating hours: 800 h, Functionality: fully functional, cutting force: 630 t, power: 90 kW (122.37 HP), net weight: 36,500 kg, total width: 2,400 mm, total length: 9,500 mm, overall weight: 40,000 kg, cutting length (max.): 1,600 mm, year of last overhaul: 2024, type of input current: three-phase, operating pressure: 220 bar, Scrap shear MS-6300e (scrap shear with electric motor) without operating materials. A 250kW diesel generator can be offered separately. Model: MS-6300e Cutting force: 630t Cutting length: 1600mm Discharge height: 500mm Power: 110 KW Capacity: 12-17 t/h Machine weight: 40 tons (+ diesel generator 4 tons) Hopper size: 3850mm x 2600mm x 1500mm Information: A scrap shear is used for economical scrap cutting: - simple automatic operation U09Wf7Zyuf - Energy-saving - Cost-saving - No foundation required Function: Scrap is fed into the loading area with the aid of an excavator. Due to the horizontal filling area and the scrap's own weight, it falls down into the loading chamber and into the cutting area. The scrap is compacted at the front wall and cut by the horizontally moving tool pick-up side via the blades on the front wall. While the tool carrier carriage moves horizontally, the processed material is pushed out via the blades on the front wall of the container. When returning to the rear position, the loaded scrap moves into the interior of the shears under its own weight. The scrap shears are available in different versions depending on customer requirements and the output size can be selected (for new orders). Inspection and trial operation are possible.

Condition: refurbished (used), Year of construction: 2024, Functionality: fully functional, cutting force: 700 t, power: 300 kW (407.89 HP), net weight: 115,000 kg, total width: 3,000 mm, total length: 17,000 mm, total height: 4,000 mm, overall weight: 91,000 kg, cutting length (max.): 7,100 mm, year of last overhaul: 2024, pressure: 360 bar, Taurus K773.L1E Cutting force 700 tons Cutting width 950 mm ( blade 1000 mm ) Cutting height 650 mm Box 7100 mm rammer 900 kN Central lubrication system Included 300 kW drive power Revision 2024 (year of construction 2006) C93Exku Revision includes the following work: - Replacing the HARDOX carriage guides - Replacing the carbon guides on the blade carriage - Installation of new knife seats top/bottom - Installation of new blades and screws top/bottom - Welding on the worn parts in the scissor mouth - Dismantling of both covers, fitting new hinges, fitting new shafts, reassembly - Overhaul of all 4 HPR 160D pumps at LINDE Poland - Sealing the valves on the left/right valve bank - Installation of new piston rod feed (180 x 8.29 m) - Installation of new feed guide bushes incl. sealing package - Overlay welding of feed block and hold-down device, followed by milling to size - Inspection of side cylinders, in some cases installation of new seal packs, if required - Replacing piston rods and honing pipes - General repair work on hydraulic pipes, clamps, in some cases - Replacement of damaged hoses - General repair work on structure, covers and platform construction - Repainting of the system - Steel frame for mounting the machine Ready for immediate use. Available from December 2024 with repainting

Condition: excellent (used), Year of construction: 2006, Functionality: fully functional, machine/vehicle number: 586, MODEL C/A4 SCIVOLO 70 YEAR OF MANUFACTURE - 2006 Bvmgmyov CHASSIS NUMBER - 586 ENGINE TYPE - DIESEL

Condition: excellent (used), Year of construction: 2014, operating hours: 15,000 h, Functionality: fully functional, It is a scrap shear, make Leimbach. The machine is immediately available ex works and can be inspected at any time. Bskmgkcbbky Please contact me if you are interested.

Condition: new, Year of construction: 2025, - Cutting Force : 1600 Tons - Capacity : up tp 70 tons per hour - Side Compression Force : 2 x 220 Tons - Clemp Compression Force : 250 Tons - Electric Motor : 480 kW Xwla3Cq - Machine Weight : 150.000 kg - PLC Controlled - Remote Control Avaliable - Output Length Adjustable

Condition: good (used), Year of construction: 2011, operating hours: 10,091 h, Functionality: fully functional, Processing capacity 20t/hour Bpjjt7W3I8

Condition: new, Year of construction: 2024, Functionality: fully functional, cutting force: 630 t, power: 110 kW (149.56 HP), total width: 2,400 mm, total length: 9,400 mm, total height: 3,800 mm, overall weight: 50,000 kg, cutting length (max.): 1,600 mm, type of input current: three-phase, Scrap Shear MS-6300mex (mobile version, with electrical motor) Diesel Generator 250KW is optional Modell: MS-63000e Cutting Power: 630t Blade length: 1600mm Drcvmmanh Output size: 500mm Power: 110 KW Capacity: 8-15 t/h Machine Weight: 39 t (+ Dieselgenerator 4t) Hooper size: 3900mm x 2400mm Information: Container Shear is used for economical scrap processing/ easy automatic operation/ energy saving/ cost saving/ no foundation needed. It can cut any kinds of scrap material. Different models for your choice. Machine is not suggested to cut high-carbon steel; axles; wire rope; pig iron; spring steel plate; rail; alloy steel; hub and so on... (these are not good for blades) Function: Scrap is filled into the hopper by means of a grab loader. Due to the horizontal movement of the holder and the scrap’s dead weight, it falls to the bottom of the loading chamber and into the cutting space. After having been compressed on the front wall, the scrap is cut by the horizontally-moving tool-holding side via the blades on the front wall. While the tool-holding slide is moving horizontally, the processed material is pushed out via the blades on the container’s front wall. While returning to the rear position, the loaded scrap moves under its own weight into the shears’ interior. The scrap shear machines are available with different design, depending on the customer requirements. The output size can be choose (only for new order).

Condition: new, Year of construction: 2025, Also, different models are available! IMPORTANT: THE MACHINE WILL BE BRAND NEW An Inclined Shear is a heavy-duty machine used in metal recycling facilities to cut various types of scrap materials efficiently. Bu8Sky7Nrm • Mixed and heavy-duty scrap can be processed (HMS 1 & 2, cars, pipes, etc. ) • No scrap length limit • No operator needed • Cut length adjustment options • Electric and Diesel options • Stationary and semi-mobile options • Hydraulic blade tightening system • The guillotine is made of casting • A remote diagnostic system is implemented • Automatic lubrication • Good output density • Heavy-duty structure • Chrome-plated & tampered shafts and sensitively honed cylinders • Special anti-wear plates • Reliable filtration system for the hydraulic oil • Reliable cooling system depending on the working climate • Top-brand hydraulic and electronic components The machine is CE-certified. The marking certifies that a product has met European Directives regarding consumer safety, health, or environmental requirements. Machine will be under AYMAS Makina San. Ve Tic. A. Ş. Guarantee against manufacturing defects for one (1) year or two thousand five hundred (2.500) working hours. SEE THE TECHNICAL DESCRIPTION BELOW Model: IS 1350 Cutting Force: 1.350 ton Hold Down Force: 250 ton Side Compression Force: 2x200 ton Cutting Width: 1.040 mm Number of Cuts: 2-3 cuts/min. Capacity up to 50 ton/h Weight: 128 ton Electrical Motor Power: 3x132 kW Chamber Dimensions: (W x L) 2,45 m x 8,5 m. General Dimensions: (W x L) 4,6 m x 11 m.

Year of construction: 2024, Condition: new, - Cutting Force : 1100 Tons - Capacity : up tp 50 tons per hour - Side Compression Force : 2 x 120 Tons Jujwma - Clemp Compression Force : 160 Tons - Electric Motor : 264 kW - Machine Weight : 85.000 kg - PLC Controlled - Remote Control Avaliable - Output Length Adjustable

Condition: new, Year of construction: 2025, - Cutting Force : 700 Tons - Capacity : up tp 20 tons per hour - Side Compression Force : 2 x 85 Tons Hpl0Erzic - Clemp Compression Force : 100 Tons - Electric Motor : 160 kW - Machine Weight : 55.000 kg - PLC Controlled - Remote Control Avaliable - Output Length Adjustable

Condition: new, Year of construction: 2025, - Cutting Force : 900 Tons - Capacity : up tp 25 tons per hour - Side Compression Force : 2 x 120 Tons - Clemp Compression Force : 160 Tons - Electric Motor : 220 kW - Machine Weight : 78.000 kg Bu8Sfniii0 - PLC Controlled - Remote Control Avaliable - Output Length Adjustable

Condition: new, Year of construction: 2025, IMPORTANT: MACHINE WILL BE BRAND NEW * The cutting guillotine is made of cast steel and is more resistant to fracture, buckling, and abrasion. * Cast steel cutting ram is subjected to a stress-relieving process. * The bolts of the blades on the cutting ram are monitored by the automation system and they are constantly kept tight by the hydraulic tightening system. Fracture and wear of the blades are minimized with this system, and 5 tons of force is applied to each bolt of the blades. Bqdc2V33 * A hydraulic clamping system is used on both the moving and fixed parts of the blades. * Friction surfaces are coated with HARDOX 450 & 500 to prevent wear. * The machine has a fully automatic PLC control and a professional remote controller. * All electric-electronic components used are Schneider and Siemens Brands. * Machine will be under AYMAS Makina San. Ve Tic. A. S. Guarantee for one (1) year or two thousand five hundred (2.500) operation hours, whichever comes first. SEE THE TECHNICAL DESCRIPTION BELOW: Cutting Force: 700 Tons Side Compression Force: 2x120=240 Tons (each wing) Clamp Compression Force: 120 Tons Pusher Ram Force: 120 Tons Electric Motor: 180 kW Machine Weight: 70.000 kg Cutting Width: 800 mm Box & Bale Size: 800 mm x 600 mm Box Length: 6.000 mm Box Width Opening: 350 mm Capacity: < 10 - 15 ton/h (Cutting Capacity), 15 - 20 ton/h (Baling Capacity)