Used Mechanical Shear for sale (6,376)

Condition: good (used), Year of construction: 2018, sheet width 2050 mm plate thickness 3.0 mm distance between columns 2100 mm back stop - adjustable 550 mm no. of strokes 35 Hub/min cutting angle 2°12 table width 400 mm table height 850 mm Control konv. Lodoyu U Dlepfx Ad Aork total power requirement 3.0 kW weight of the machine ca. 1280 kg dimensions of the machine ca. 2400 x 1500 x 1300 mm Current new price approx. 20.000 Euro from a maintenance workshop Equipment: - robust / powerful electro-mechanical guillotine shears - manual material backgauge * stepless adjustment range * adjustment from behind - by handwheel * including mm scale * max. adjustment range 550 mm - Manual kerf adjustment, from the front - 1x side stop with mm-scale - 1x support arms - 1x free-moving foot switch - rear sheet metal chute - rear safety device (light barrier) - Operating instructions (machine control)

Condition: good (used), Year of construction: 2007, sheet width 1350 mm plate thickness 4.0 mm thickness at "Niro-steel" 2.0 mm no. of strokes max. 35 Hub/min cutting angle 2.0 Grad table height 945 mm distance between columns 1361 mm Control CIDAN / SIEMENS engine output 5.5 kW weight of the machine ca. 1400 kg range L-W-H 2200 x 2000 x 1550 mm Features: - robust / motorized swing cut guillotine shears - unbreakable and torsion-free welded steel construction - compact and clear machine construction - NC electro-motorized backgauge, with digital display * Target / actual value stop value input * stepless adjustment over the entire travel range - 1x hold-down bar - 1x material side stop - recessed grips in the front support table - Manual cutting gap adjustment from the front - Rear sheet holding device for thin sheets - 1x freely movable foot switch Lrsdeyuzcuepfx Ad Aok - Operating instructions (PDF)

Condition: good (used), Year of construction: 1963, cutting length 2500 mm plate thickness 3 mm distance between columns 2050 mm blade length 2650 mm total power requirement 3 kW weight of the machine ca. 2,5 t - The scissors are equipped with an adjustable stop on the back. stop. Each side is equipped with a millimetre counter, so that the guarantee that the cuts Lrsdjul Eixjpfx Ad Aok are true to size. - Spring-loaded automatic hold-downs prevent the material from shifting during the cutting process. material during the cutting process.

Condition: good (used), sheet width 2000 mm plate thickness 2,25 mm distance between columns 2040 mm total power requirement 7,5 kW Lredpfxsul Ei Es Ad Aek weight of the machine ca. 1,5 t dimensions of the machine ca. 2,2x1,7x1,1 m SN-No. 380/6

Condition: used, sheet width 2500 mm plate thickness 3,0 mm distance between columns 2550 mm back stop - adjustable max. 510 mm weight of the machine ca. 1,8 t dimensions 3,3 x 1,4 x 1,8 m Lsdsyv I H Depfx Ad Aerk

Condition: used, Year of construction: 1980, sheet width 2540 mm plate thickness 2 mm thickness at "Niro-steel" 1,25 mm no. of strokes 63 Hub/min cutting angle 1,13 ° table height 750 mm table width 320 mm back stop - adjustable 5,0-550 mm Lrsdpfx Adoyv N I Aj Ask total power requirement 3 kW weight of the machine ca. 1600 kg Equipment: - manual backgauge, with analog display * Adjustable from the front * stepless adjustment over the entire travel range - 1x long side stop - 3x support arms - Free-moving foot switch - Sheet holding device for thin sheet blanks

Condition: used, Year of construction: 1986, sheet width 2540 mm plate thickness 2 mm thickness at "Niro-steel" 1,25 mm no. of strokes 63 Hub/min cutting angle 1,13 ° table height 750 mm Lodpoyv Nn Ajfx Ad Aork table width 320 mm back stop - adjustable 5,0-550 mm total power requirement 3 kW weight of the machine ca. 1300 kg Equipment: - manual backgauge, with analog display * Adjustable from the front * stepless adjustment over the entire travel range - 1x long side stop - 3x support arms - Free-moving foot switch - Sheet holding device for thin sheet blanks

Condition: new, Year of construction: 2026, neu 2026 090204 Ledsyz Dc Sjpfx Ad Ajrk Mai 2026, Zwischenverkauf Türkei 4290 € 1250 mm 1.5 mm 500 mm 2250 mm 1000 mm 1150 mm 460 kg DEMO MACHINE - MINT CONDITION welded steel construction with manual hold down unit back gauge adjustable by handwheel users manual in ENGLISH

Condition: new, Year of construction: 2026, neu 2026 090203 Mai 2026, Zwischenverkauf Türkei 3810 € 1020 mm 1.5 mm 500 mm 1950 mm Lrsdpjyz Dc Esfx Ad Ajk 1000 mm 1150 mm 420 kg welded steel construction with manual hold down unit back gauge adjustable by handwheel users manual in ENGLISH

Condition: new, neu ca. 10 Wochen ab Auftrags Türkei 25000 € 480 € 2050 mm 6 mm 30 1/min 2.3 ° 750 mm 7.5 kW 800 mm 530 mm 2355 mm 2720 mm 1630 mm 1230 mm 3200 kg The machines feature a robust, welded steel frame for maximum cutting precision Motorized back gauge 750 mm, ball screw spindles, NC control 2 cutting edges on the upper blade and 4 cutting edges on the lower blade 1000 mm squaring arm with scale, T-slot, and flip stop 2 support arms Lrjdpfowp S Swex Ad Aek Mechanical downholder Manual cutting gap adjustment on the front Balls in the table Cutting line illumination Foot pedal Emergency stop button Operating manual with EC declaration of conformity. INCLUDES THE FOLLOWING OPTIONAL EQUIPMENT: Blades suitable for cutting stainless steel Rear light barrier protection

Condition: used, sheet width 2500 mm plate thickness 4 mm distance between columns . mm Ledpfsyr Skwsx Ad Aerk The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team

Condition: new, sheet width 1050 mm plate thickness 3 mm distance between columns 1100 mm back stop - adjustable 600 mm connected load 3 kW weight of the machine ca. 1,1 t dimensions 1,7 x 2,1 x 1,3 m The machine works quietly and it is energy-saving by its gear motor and brake system. Our machine is manufactured as steel construction monoblock body welded from ST42 quality material. The blades on the machine are of 2379 quality and the brand’s name is BOHLER. These high-quality blades ensure quality and precise cutting. Emergency stop button and finger guard grill are standard equipment of foot pedal machine. Ljdjfv H Dgjpfx Ad Aork

Condition: used, sheet width 2540 mm plate thickness 2.00 mm Lrjdpfxsxacfto Ad Aok thickness at "Niro-steel" 1.25 mm no. of strokes max. 63 Hub/min cutting angle 1.13 Grad table height 750 mm table width 320 mm distance between columns 2620 mm back stop - adjustable 5.0 - 550 mm Control konv. engine output 3.0 kW weight of the machine ca. 1600 kg range L-W-H 3100 x 1980 x 1400 mm Equipment: - robust / motorized swing cut guillotine shears - break-proof, torsion-free steel welded construction - compact and clear machine design - manual back stop, with analogue display * adjustable from the front * stepless adjustment over the entire travel range - recessed grips in the support table - 1x hold-down bar - 1x side stop - 3x support arms - 1x freely movable foot switch - operating instructions (PDF) Special accessories included: - sheet metal holding device for thin sheet metal cuts

Condition: new, sheet width 1050 mm plate thickness 2,0 mm distance between columns 1050 mm Lrodpfsxabdhox Ad Aok down holder 1 Stück fence Tisch 80 - 480 mm fence Breiten 0 - 600 mm table-size 1300 x 600 mm work height max. 760 mm total power requirement manuell kW weight of the machine ca. 413 kg. range L-W-H 2,0 x 1,04 x 1,6 m - Including adjustable stop on the work table for miter cuts - The knife can be lifted easily thanks to the counterweight on the back - Large work table for safe placement of the sheet metal plates - Sheets can be pushed through, i.e. longer sheets can be cut - Handwheel on the front to adjust the back gauge - Comes with a robust cast iron base as standard - Long service life thanks to knives made of quality steel - Standard with hold-down device including quick-release clamp - Robust machine construction for high stability Furnishing: - manual lever shears - stable execution - hold-down bars - Side scale with unit of measurement - Table stop / width stop

Condition: used, sheet width 4080 mm plate thickness 2.0 mm ST thickness at "Niro-steel" 0.8 mm Sheet thickness for ALU 2.5 mm cutting angle 1.3 Grad no. of strokes 34 Hub/min distance between columns 4310 mm back stop - adjustable 15.0 - 750 mm table height 820 mm Control ELGO engine output 9.0 kW weight of the machine ca. 3600 kg. range L-W-H 5250 x 2200 x 1400 mm Good condition (!!) Current new price approx. €70,000 Special price upon request The MHSU motor-driven guillotine shear is based on a torsion-free, rigid welded Lrsdpfxsxabc Re Ad Aok construction and a dynamic, quiet, and powerful gear motor. High static and dynamic rigidity is ensured by robustly dimensioned main components such as the cutter bar, support table, side supports,and the main drive unit. The motor- driven guillotine shear was developed forsheet metal and plastics processing. With these shears, you can effortlessly produce clean cuts in series. Features: - NC robust, motorized swing cut guillotine shears - with ELGO NC control unit * Digital position display of the backgauge * Adjustable from the front right * With target/actual value input * Continuous adjustment across the entire travel range * Limit switch protection - NC motorized material/backgauge - Shatter-proof, torsion-free welded steel construction - Compact and clearly arranged machine design - Support table with recessed grips - 1x hold-down bar - 1x side stop with T-slot and scale - 3x front support arms - 1x freely movable foot switch - Operating instructions Optional accessories included: - Pneumatic sheet metal holding device for thin sheet metal blanks

Condition: used, Year of construction: 1963, sheet width 1040 mm plate thickness 2.50 mm thickness at "Niro-steel" 1.25 mm no. of strokes max. 90 Hub/min cutting angle 2.70 Grad distance between columns 1060 mm work height max. 940 mm back stop - adjustable max. 550 mm column arm 120 mm voltage 400 V engine output 4.0 kW weight of the machine ca. 820 kg. range L-W-H 1650 x 1200 x 1250 mm Equipment: - robust / motorized crank guillotine shears with motor drive - break-proof, torsion-free steel welded construction - compact and clear machine design - manual back stop, with analog position display * adjustable from behind * continuous adjustment over the entire travel range * travel range max. 550 mm - 1x hold-down bar Lrodpjxach Iefx Ad Ajk - 1x side stop - 1x front support arm - original operating instructions

Condition: used, sheet width 1050 mm plate thickness 3.0 mm thickness at "Niro-steel" 1.5 mm no. of strokes 35 Hub/min cutting angle 2°30 ° Lsdpfx Asxablled Asrk engine output 3.0 kW table height 810 mm weight of the machine ca. 1150 kg. range L-W-H 1300 x 1520 x 1170 mm from a maintenance workshop (!!) Furnishing: - robust electro-motorized metal sheet shears - manual backgauge - adjustable up to 610 mm, using the handwheel from the back - 1x side stop including mm scale - 2x table sheet metal support arms - Piece counter - freely movable foot switch - rear sheet metal slide - EMERGENCY stop button at the front * Machine link: ?machineno=1008-9325126

Condition: used, Year of construction: 2008, sheet width 1530 mm plate thickness 4.0 mm thickness at "Niro-steel" 2.0 mm no. of strokes max. 34 Hub/min cutting angle 2.70 Grad distance between columns 1540 mm work height max. 920 mm Control konv. voltage 400 V engine output 3.2 kW weight of the machine ca. 1115 kg. range L-W-H 2275 x 2220 x 1400 mm Lsdpsxyln Rsfx Ad Aerk Features: - Robust motorized swing-arm guillotine shear - Break-resistant, torsion-resistant welded steel construction - Compact and easy-to-use machine design - Manual backgauge, adjustable from the rear * Stepless adjustment across the entire travel range - 1x hold-down bar - 1x freely movable foot switch - Front, extendable table extension - Rear safety device - Original operating instructions * Optional accessories included: - Sheet metal holding device for thin sheet metal blanks

Condition: used, sheet width 3100 mm plate thickness 2.00 mm thickness at "Niro-steel" 1.25 mm no. of strokes max. 36 Hub/min cutting angle 0.9 Grad table height 800 mm Lsdpfxjxcyw Ej Ad Ajrk table width 430 mm distance between columns 3200 mm back stop - adjustable 5.0 - 750 mm Control konv. engine output 3.0 kW weight of the machine ca. 1950 kg range L-W-H 3730 x 2070 x 1400 mm Original price approx. 45.000 euros (!!) Special price on request Features: - Robust / motorized swing-cut guillotine shears - Machine with manual material/backgauge * Travel range 5.0 – 750 mm stop depth * Analog position display * Manual adjustment from the front - Break-proof, torsion-free steel welded construction - Compact and clear machine design - 1x hold-down beam * Hold-down opens before the knife beam moves up * No kinking of very sensitive sheets - Manual cutting gap adjustment - Integrated sheet metal holding system for thin sheet metal cuts - Sheet metal/cut material removal at the front (operator side) - 1x side stop with mm scale - 3x table extensions - 1x freely movable foot switch - Operating instructions (PDF

Condition: used, Year of construction: 2016, gebraucht 2016 9737 prompt, Zwischenverkauf v 9800 € 1 8330 € 2025 mm 3 mm 500 mm 4 kW 2500 mm 1720 mm 1200 mm 1100 kg Manual back gauge 500 mm Foot pedal Side stop 4 table support arms Light barrier protection at the rear of the machine Stroke counter Lredpfx Adswiq Iwo Aok Sheet ejection to the front for small parts Operating manual in English with EC declaration of conformity

Condition: new, Year of construction: 2026, Quick reverse movement, high cutting capacity with low power Strong steel welded frame structure Maintenance-free guides and bearings. Operating pedal, safety buttons Front material support up to 920 mm 5m 32Amp cable to power the machine Ljdpfxjl Exypj Ad Ajrk CE certificate Automatic stop with digital position readout, length 0 - 750 mm with pneumatic sheet support system with rear material pick-up compressed air connection required min. 6 bar

Condition: new, Year of construction: 2025, sheet width 1320 mm plate thickness 2.5 mm ST thickness at "Niro-steel" 1.2 mm Ledpfxoxabz He Ad Aork blade length 1350 mm no. of strokes 34 Hub/min back stop - adjustable max. 825 mm cutting angle 1.5 ° work height max. 810 mm Control konv. engine output 3.0 kW weight 1100 kg range L-W-H 1950 x 1450 (2000) x 1200 mm Exhibition machine - like new Never been used (!!) Special price upon request Features: - Robust electro-mechanical sheet metal shear - Heavy-duty / robust drive motor - Manual backgauge, including analog position indicator * Adjustment range max. 825 mm - Manual cutting gap adjustment - 2x table side stops including mm scale - 1x front stop bar - manually adjustable - 2x front support arms - Grip recess in the front work table - 1x freely movable foot switch, including emergency stop button - Control cabinet/operating panel - front right - Rear safety device - Rear sheet chute - Connection cable + plug

Condition: used, Year of construction: 1965, Technical details: sheet width: 1200 mm plate thickness: 1,0 mm throat of pillar: 1200 mm number of cutting strokes max.: 45 p.Min. throat max.: 300 mm cutting gap adjustment: nein down holder: 5 Stück back gauge: ca. 500 manuell mm Lredpfju Icppox Ad Aek total power requirement: 2,2 kW weight of the machine ca.: 1,6 t dimension machine xH: 1,6 x 1,6 x 1,9 m further features: -with shear angle adjustment -operation via foot switch -voltage 380 V *

Condition: used, Technical details: sheet width: 1500 mm plate thickness: 2,25 mm distance between columns: 1600 mm back gauge: nein cutting angle: nicht bekannt ° cutting gap adjustment: nein mm down holder: über Druckleiste Stück height over floor: 850 mm Table dimensions: LXB 1800 x 350 mm weight of the machine ca.: 0,85 t Lrsdpeu Icn Eefx Ad Aek dimensions of machine: 2,0 x 0,8 x 1,3 m simple mechanical guillotine shear with shelf right/left 305 x 100mm operation via ON/OFF *

Condition: used, Year of construction: 1992, Technical details: sheet width: 3000 mm plate thickness: 2,0 mm distance between columns: 3300 mm back gauge: 580 manuell mm cutting angle: Nein ° cutting gap adjustment: Nein mm down holder: 13 Stück Table dimensions: 3300 x 300 mm weight of the machine ca.: 3,0 t dimensions of machine: 3,7 x 1,5 x 1,8 m incl. 2x upper knife and 2x lower knife each 1500mm incl. table supports 1500 x 1500mm with roller elements 2x profile strips L: 1400mm 1x side stop bar 1600mm operation via control panel and/or foot pedal * Lrjdpfx Adsu Icnro Ajk