Scrap shear

Sierra Idromec T 650 LS

Condition: good (used), Year of construction: 2014, operating hours: 18,520 h, Single-shaft shredder, especially suitable for secondary shredding and granulation of pre-shredded material. Application: Commercial waste for thermal or material recovery, e.g. paper, cardboard, plastics and foams, rubber, leather, textiles, floor coverings, etc. Lindner Power Komet 1800 Year of manufacture: 2014 Control cabinet; complete with ABB frequency converter, Gusdpfx Aewxmb Ejhnjd Recooler Operator panel Hopper Drive motors: 200 kW Hydraulic unit: complete Total weight approx. 21 t Dimensions approx. LxWxH mm: 5000 x 2800 x 3000 mm Inspection: possible upon arrangement. Delivery time: immediate.

Condition: excellent (used), Year of construction: 1995, Combination Unit: Manufacturer: GSG Feeder: Type: 840.02-027 Crusher Descaler: Type: 663.02-017 Wire Range: Ø5.5-16mm For wire rod with approx. 40-60 daN/mm² strength Crushing and Bending Rollers: Carbide Inserts Adjustment with 0.37 kW - 1.15 A gear motor Brush Drive with 0.25 kW gear motor, n=293 rpm Connection Voltage: 380-420 V 50 Hz Dry Coating Unit: Type: BSG/T Filling: Calcium Stearate (e.g., Traxit Type: D S 51 E) Stearate Consumption: approx. 350 g per t of wire Drawing Speed: max. 15 m/s Electrical Power: 2x 0.55 kW gear motors Cassette: 2 slots (supplied with 1x roller block + 1x cassette) Type: PKG/T (TS) Cleaned rolled wire Wire strength approx. 40–60 daN/mm² Wire range max. inlet diameter 9.5mm, finished diameter 3.5–8.5mm Roll dimensions min. Ø115mm, max. Ø125mm, Bore diameter Ø82mm, width 15–25mm Cooling pin diameter 25mm Cooling water consumption approx. 600 l/h Drawing machine: Manufacturer: Koch Type: KHZ 5000 Year of manufacture: 1993 Serial number: 13.821 Number of draws: 1 draw per block Drawing drum: Ø700mm Gueder Nfvmjpfx Ahned Tensile force: mechanical 5000 N Wire material: mild steel wires Run-in strength: approx. 40 – 45 daN/mm² Maximum drawing range: Inlet diameter 5.0 – 8.5mm Cross-section reduction: 20 x 25% (mechanical gradation) Drawing speed: up to max. 7.0 m/s Brake: Twiflex, type: MRB Drive: AC motor/frequency converter, Siemens PN=110 kW, n=1485 rpm Spooler: Manufacturer: Koch Type: KHS 1250 Year of manufacture: 1993 Factory No.: 13741 Wire diameter: 5 – 8.5 mm Strength: approx. 55 – 70 daN/mm² Winding speed: V=7 m/s, adapted to the drawing machine Filling weight: approx. 3000 kg Spool drive motor: Three-phase motor with external fan Type: 1 PQ 6253 – 6 AA 70- Z A 15 + K 20 + C 14 + H 46 P=37 kW, n=1000-2000 rpm, IP54, design B3 Laying drive motor: 66-671U, 1.5 kW, 170 V, 9.8 A, 1680 rpm, IP 44, B5-200 With Attached tachometer generator TG 20, 20 V / 1000 rpm With attached spur gear SK 32, i=57.53, design B6 Hydraulics: Hydraulic excavator type: H13 AK Pneumatics: Twiflex disc brake type: MRB Pneumatic cylinder type: SPWG 28032-25mm stroke Dimensions: 3100 x 3000 x 1700 mm (L x W x H) without counterweight

Condition: new, Year of construction: 2022, Layout: Shears Attachment suited for: Construction machines Metal shear / steel shear for steel cutting for excavators It has been designed for demolishing iron structures and for cutting different structural steels It has some unique properties Replaceable cutting knives Upper head and slewing ring Godpfxopa Rpbs Ahnoud Specially developed hydraulic cylinder The double hose connection For detailed information and price, please contact us

Condition: used, 3-axle truck trailer, low-loader trailer MÜLLER MITTELTAL Type AZP Curtain-sided low loader, low-loader trailer, low loader for machine transport First registration: 2001 Total mileage: approx. 350,000 km Gross vehicle weight: 24,000 kg Unladen weight: 5,500 kg Payload: 18,500 kg Platform height: 840 mm Loading height under tarpaulin frame: 3,200 mm Platform length: 7,450 mm Overall length: 9,150 mm Overall width: 2,550 mm Overall height: approx. 4,050 mm Axle load front: 8,000 kg Axle load middle: 8,000 kg Axle load rear: 8,000 kg Tyres: Michelin 215 / 75 R17.5 (135/133J XTE 2+ TL) - Rear wing doors at drop side height - Tarpaulin frame with EDSCHA roof system - Tarpaulin frame designed for easy removal (can also be used with the frame removed and the tarp pushed forward) - Spare wheel mounted on the front wall - Independent lifting and lowering of front and rear axles - Middle axle with lift function - Drawbar – extendable in multiple stages - Heavy-duty lashing rings on the outer frame and in the vehicle centre Gusdpfxot N Anto Ahnod - ALU drive-on ramps, length 268 cm, width 410 mm, height 130 mm (surcharge EUR 2,000 net) The trailer was purchased new by us and is therefore first-hand. The trailer has been deregistered since 2025.

Year of construction: 2026, condition: new, ‼️SONDERANGEBOT‼️HIER IN STOCK IN HEILBRONN! Only while stocks last! ‼️SOFORT AVAILABLE ‼️AUF LAGER‼️ Powerful, robust machine at an affordable price from Josan & Söhne Alligator shears small: ➡️3 kw motor ➡️7 up to 8 shear strokes per minute. ➡️Maße 1100x980x800 mm ➡️Gewicht approx. 275 kg ➡️Spannweite 15cm ➡️Messer can be turned over at some point when they are blunt, allowing you to work with them for longer ➡️UVV (accident prevention regulation) made by German company here Net 3.999,00€ +19% VAT 759,81€ Gross 4.758,81€ Alligator scissors large: ➡️Motor 7,5 kw ➡️30 cm span ➡️7 up to 8 shear strokes per minute. ➡️Maße 249x109x174 cm ➡️Gewicht approx. 1500 kg ➡️Messer can be turned over at some point when they are blunt and thus work longer with them ➡️630 KN pressure ➡️Hydraulikdruck 21 mpa ➡️UVV (accident prevention regulation) made by German company here Gsdpsp E Ehqofx Ahnsud PRICE ON REQUEST Pictures/equipment may vary. Errors/changes excepted

Year of construction: 2023, condition: new, functionality: fully functional, This machine, type KM13, cuts electrical cables from 20 to 120 mm in diameter. The different diameters are easily adjusted by turning the hand wheel up and down. The machine has a speed of 25 mtr/min. The dimensions are: length 600 mm, width 600 mm and height 1600 mm. The weight of this machine is about 200 kg. This machine is powered by a 380V-50HZ, 3KW electric motor with a gearbox cabinet. The cable is cut from 2 sides so the copper core falls out easily. Spare parts such as blades, drive, bearings etc can also be supplied. If required we can also perform maintenance on these machines A machine that is ready to use and easy to operate. If you want to try it, please bring cable. Guedpfx Ajq E Ti Hshned

Condition: ready for operation (used), For sale: a conveyor belt with dimensions of 1x3 meters, ready for operation. ✅ Length: 1x3 m ✅ Belt width: 0.4 m ✅ Transport can be arranged ✅ A wide selection of conveyor belts is available on site Please contact us. We will help you choose the right conveyor belt to meet your needs. Godpfxjt R R T To Ahnjud

Condition: used, functionality: fully functional, machine/vehicle number: H2X393F01980, Year of construction: 2015, operating hours: 14,760 h, load capacity: 3,500 kg, lifting height: 3,550 mm, free lift: 150 mm, load center: 500 mm, fuel type: diesel, construction height: 2,514 mm, power: 44 kW (59.82 HP), fork length: 2,300 mm, front tire type: cushion tires (black), front tire size: 27x10-12, rear tire type: cushion tires (black), rear tire size: 23x9-10, empty load weight: 4,850 kg, color: red, Equipment: CE marking, adjustable boom, cabin, lighting, Linde Forklift with Long, Plastic-Coated Forks VERSION: LINDE Diesel Forklift Model H35 D (3B) Load capacity: 3,500 kg at load center: 500 mm Series: 393-02 PEDALS: Dual pedal system Maximum driving comfort and optimal productivity through Linde dual pedal operation DRIVE AXLE TIRES: Super-elastic 27x10-12 STEER AXLE TIRES: Super-elastic 23x9-10 STANDARD LIFT MAST 188: Lift height: 3,550 mm Height overall: 2,514 mm Free lift: 150 mm CARRIAGE: 1,150 mm / 6 rollers / up to 3.5 t DRIVER'S CAB: Standard full cabin / overall height: 2,210 mm Full cab offers complete weather protection including: Roof window with wiper, front and rear windows with wipers, Metal doors with side windows DRIVER'S SEAT: Comfort seat, air-suspended, fabric cover Swivel function DRIVER'S STATION EQUIPMENT: Hot water heating Radio / Bluetooth® / USB / SD Panoramic interior mirror Exterior mirrors left & right Clipboard with LED lighting OPERATION: Central lever control LLC AUXILIARY HYDRAULICS OPERATION: Cross lever control AUXILIARY HYDRAULICS: Dual auxiliary hydraulics on vehicle side Gusdpoyr I Niefx Ahnjd Standard dual auxiliary hydraulics on lift mast LIGHTING: Work lights, mounting positions 3 and 4, LED Two front-facing headlamps – top left and right Work lights, mounting positions 7 and 8, LED Two rear-facing headlamps – top left and right Switchable via roof console using 3-position switch (On/Off/Reverse mode) ENVIRONMENT: Dust cover mounted higher VEHICLE TECHNOLOGY: Tilt position preselection PAINTWORK: RAL 2002 Red ATTACHMENT: Durwen Fork Positioner RZV 35 GS with separate side shift +/- 100 mm, with bolted, plastic-coated forks 2300 x 140 x 50 mm, Frame width: 1,150 mm Opening range (fork-arm to fork-arm): 490 - 1230 mm

Year of construction: 2022, condition: new, Forestry Mulcher // Tree Mulcher The mulcher for large excavators, with GALEN technology The mulcher on the picture is for 20excavators mulches trees up to 30 cm in diameter and comes in working width: 160 cm. It is ideal for handling and removing vegetation in wooded areas, especially for jobs that require a large shredding capacity and speed Guodpeph Rmnofx Ahnsd For detailed information and price, please contact us

Condition: used, Year of construction: 2025, color: grey-black, empty load weight: 3 kg, first registration: 06/2025, fuel type: gasoline, gearing type: mechanical, TITLE: USED ROLL-OFF CONTAINER FOR BULKY WASTE WITH HYDRAULIC LID – DRIVER’S SIDE OPENING, PASSENGER SIDE HINGES, REAR OPENING WITH TWO SWING DOORS, NEW FLOOR FITTED REF: 25-U-89 TYPE: Bulky waste Gujdjwuwvrjpfx Ahnjd NEW: No LID: Yes OPENING: Rear with two swing doors DIMENSIONS TOTAL OUTSIDE LENGTH: 5.00 m BOX OUTSIDE WIDTH: 2.50 m FRONT PANEL INTERNAL / EXTERNAL: 2.20 m / 2.60 m REAR PANEL INTERNAL / EXTERNAL: 2.20 m / 2.60 m SIDE PANEL INTERNAL / EXTERNAL: 2.20 m / 2.60 m CAPACITY: 25 m³ WEIGHT: 2,840 kg FLOOR: 4 mm WALL: 3 mm COLOR: green Errors and omissions excepted. Prices shown are excluding VAT. Please contact sales for an up-to-date price and conditions. For more information: Loris: 3484773001 URL: #glispecialistidelloscarrabile SCARRABILI AURORA operates in the sale and purchase of industrial and commercial vehicles, specializing mainly in the waste sector. Specialized in trucks, trailers, and roll-off equipment. Over 50 trucks and more than 150 containers, roll-off bins with and without cranes, available for immediate delivery. E.&O.E. Given the number of listings and details provided Aurora recommends checking the accuracy of the information with our sales staff.