Condition: new, Year of construction: 2025, CORMAK HBS210 VARIO band saw, equipped with stepless cutting speed adjustment, a hydraulic cylinder, cooling and an arm swivelling up to 60º, together with blades from renowned German company Röntgen, is used commonly in ironworking, where precision, quality and cutting speed are essential. STRENGTHENED ARM OF INCREASED RIGIDITY EXCLUSIVELY OFFERED BY US. Machine description Horizontal band saw for metal with swivelling arm allows cutting in perpendicular to the axis of material cut and at any angle from 0º to 60º. The drive from the electric motor to the wheel driving the cutting band is transmitted with a motor with a MECHANICAL transmission (not belt). The cutting band is tensioned on two cast iron wheels with a hand tightener and guided by a set of roller bearings. Element cut can be fed manually or by any feeding device, meanwhile the tool feed is gravitational on the principle of oil flow in a two-chamber hydraulic cylinder. Appropriate speed of arm lowering is obtained due to the valve controlling oil flow between hydraulic cylinder chambers. Band guides are equipped with a set of roller bearings. This has a huge impact on the band guiding, its life, cut straightness, cutting accuracy and quality. Appropriate machining speed (band travel speed) is achieved by changing the position of a button on the control panel. Particular kinds and types of materials require particular cutting speeds. Rigid arm is made of SHAPED CAST IRON. Control panel is placed by the arm. The base is designed as a rigid welded body of steel sheets. Inside is a separate flood coolant container with an electropump. The shape of the base upper part constitutes a tank for flood coolant draining and chips produced during cutting. Cast iron workbench is attached to the base, with a swivel arm and control panel on separate arm. The main cutting move in the cutting process is moving the cutting band and the arm lowering feed. The arm lowering speed (the cutting speed) is adjusted with the hydraulic cylinder. The feed speed is controlled by the control panel. Smooth speed adjustability in the range of 0–90 m/min. In rest arm position (after the cutting process) the cutting band drive is switched off automatically. Safety is ensured with cutting band guards and microswitches stopping the motor after cutting cycle is finished or after any of the guards are opened; additional protection consists of automatic switch-off of the band saw in case the cutting band breaks. Band dimensions 2110×0.9×20 mm Drive wheels diameter 260 mm Motor 950W, 2 poles Power supply 400V 50Hz Band speed 0–90 m/min (stepless adjustment) Weight 152/190 kg Packaging dimensions 1150×560×930 mm Dkjlioudi E Tsm N H Uol Angle 0º ø170 170×210 170×170 30º ø150 140×140 140×140 45º ø130 110×110 110×110 60º ø70 60×60 60×60 Additionally 2 M42 saw blades 5L Emulsol ZW580 magnetic chip collector

Condition: like new (used), Year of construction: 2023, Functionality: fully functional, machine/vehicle number: G90230201, saw blade diameter: 350 mm, total length: 1,500 mm, total width: 970 mm, total height: 1,400 mm, cutting height (max.): 100 mm, overall weight: 350 kg, saw blade speed: 3,000 rpm, input voltage: 400 V, Automatic CNC controlled circular saw for cutting and drilling / tapping aluminium. Tronzadoras MG - GAA-350-90+CNC+TR12 • Automatic cycle. • 700 mm ballscrew feeder. • OMRON controller. Dslim N Hevl Eahs Uokl • 10 programs with 30 lines. • 20 parts in memory. • Emergency stop. • Adjustable feeding and cutting speeds. • Automatic adjusted cutting length with multiple advances. • Cut to 90º. • Automatic air-oil cooling. • Semi-automatic or fully automatic operation. The machine is inspected, serviced and ready for work.

Condition: new, Year of construction: 2025, Upgrade your aluminium production to a high-technology, high-efficiency, high-safety saw. X45 is an advanced high-accuracy up-cut saw for small-profile cutting of straight or mitered aluminium parts up to ±85°. Two-hand button-press cutting with full saw guarding (including tunnels on each side) preventing access to the cutting area. Category 3 safety design with a dual-channel safety relay and a reset button. Electronically settable up-stroke point to any position (without a sensor) for shortest cutting distance. Advanced chip collection design with up to 94% chip collection efficiency and up to 8× less chips to clean from your saw / floor compared to traditional saws. • Ø450 mm TCT saw blade with powerful 3.0 kW drive motor • Ergonomic usage design with blade changed from the front of the machine • AS / NZS 4024:2014 Category 3 safety standard, with safety relay and two-hand cut operation • Overhead safety guards with safety tunnels 900 mm each side of the saw • Safety guard liftable on a press of a button for unimpeded saw table access • Safety switch disabling the saw operation on guard up • Electronic lockout of the blade / machinery panels preventing access to rotating assemblies also during spin-down. • Safety switch detection of opening of the access panels triggering an e-stop. • 2× vertical and 2× horizontal clamps with adjustable clamp pressures. • Adjustable saw mitre angle to ±85° • Moveable back fence for increased cutting capacity • Spray-mist blade lubrication system • Air gun and LED interior light • 2× Ø100 mm points for chip collection Delim N Hov Iccfj Uskl • Optional 3.8 kW vacuum chip extractor

Condition: good (used), Year of construction: 2008, Manufacturer: EBG-TECH Type: BMW N-63 Dslef Ecwzoim N H Uokl Year: 2008 Max. disk diameter: 300 mm Overall size: 1900 x 1200 x 2900 mm Weight: 1750 kg

Condition: good (used), Year of construction: 1999, UZAY saw model SY 1010, double column semi automatic saw, distance between centers of the two columns 2250mm, diameter of the columns 170mm. Cutting measurements: max diameter 1010mm, rectangle 1010 x 1010 mm, Square 1010mm x 1010mm cutting measurements in Rounds at 45º 620 mm at 30º 820mm 45º L 500mm 30º L 660mm, in Rectangle 45º R 1010 x620mm, 30º x R 825mm L 1010mm x500mm, 30º L 1010mmx660mm, in Squares 45º R 620mm, 30º R 820mm, 45º L 500mm, 30º L 660 mm, cutting speed 15 to 105m/min (variable by electronic variator), main motor 4kw, total power 4.5kw , machine with motorized rotation, height of the jaws 600mm, length of the jaws 535, estimated working height 725mm, with chip extractor, dimensions of the belt 1.64mm x 54mm x 9400mm, distance between centers of the two columns 2250mm, weight 6000kg machine in good condition Djlim Nsl Dxhde H Uokl

Condition: excellent (used), Year of construction: 2012, Eismo - Ergonomic model 290.250 DGA - 2-axis automatic band saw 2 working axes Siemens Simatic numerical control roller infeed conveyor (6 m x 0.65 m) with 2 new saw blades Excellent condition Location - Poland Doloupht Isim N H Uokl

Condition: new, Year of construction: 2025, Cormak S200R Manual band saw for cutting in large industrial facilities. Features high accuracy metal cutting, even at 45º/60º. Machine features CORMAK S-200R MANUAL band saw with EC declaration, provides cutting metal at any angle from -45° to + 60°. The element cut can be fed manually or by any feeding device. The feed during cutting is gravitational on the principle of oil flow in a two-chamber hydraulic cylinder. Appropriate arm lowering speed is ensured by a valve controlling oil flow between the chambers. Operator starts the machine by pressing the START button and sets cutting speed. After the cycle is finished the machine automatically stops and the operator lifts the arm to the starting position. Material is fed manually. This model is used in both low and high quantity production, and due to its solid construction allows for cutting various materials, including stainless steel, tool steel and profiles. The machine provides cutting at an angle due to rotary arm. The band saw arm is made of uniform cast iron, and together with 27 mm wide cutting band enables high quantity cutting of various materials. The vice is located in an adjustable bed and equipped with a quick clamp. Blade guides are equipped with a ball bearings system and cemented carbides, ensuring excellent cutting precision and straight cut. The arm is equipped with an automatic blade tension sensor, at a 25° angle, thus increasing blade's durability. There is a blade cleaning brush attached to the bottom of the arm. Machine drive is transmitted through a worm drive filled with gear oil. The machine is equipped with a three-phase motor with double winding and two cutting speeds. The motor is thermally protected. Two cutting band speeds: 35 and 70 m/min. The construction: the arm, the vice and the rotating table are iron castings. Closed cooling system. The machine is equipped with a bumper with a ruler for setting the length of material cut. The base of the machine is a rigid cuboid made of steel sheets in which a fluid container with a flood coolant pump is located. Safety during cutting ensures an electrical system that meets all EC requirements. The machine is equipped with a limit switch which stops the machine after a cutting process is finished, an emergency button, and microswitches stopping the motor after cutting cycle is finished or after any of the guards are opened Technical data Type gravitational Arm raising and lowering gravitational with stepless arm lowering adjustment Band speed 36/70 m/min Cutting at an angle from 45° left up to 60° right Vice manual Minimum cutting diameter Ø 5 mm Minimum material length in vice 30 mm Dkoliofy Ttiom N H Usl Vice base height 890 mm Cutting band dimensions 27×0.9×2910 mm Total power 2.1 kW Dimensions (LxWxH) 1600×800×1400 mm Weight 500 kg Max. cutting range [mm] Angle 0º ø250 320×240 240×240 45º L ø200 220×120 190×190 45º P ø220 235×120 210×210 60º P ø110 155×110 100×100 For more information please visit our web page or contact us

Condition: used, cutting diameter 320 mm saw band length 4570 x 27 x 0,9 mm table height mm cutting width 450 x 280 mm power capacity 4,0 kW cutting speed 15 - 105 m/min engine 380 V total power requirement 4,0 kW weight of the machine ca. 0,8 t Dkjliovn U D Uom N H Uol dimensions of the machine ca. 1,8 x 0,8 x 1,2 m Band saw with - coolant device - mitre device

Condition: used, Opus 400 Band saw for iron, with built-in grinding wheel and welding machine Dkjlim Norf A Uzo H Usl

Condition: good (used), Year of construction: 2003, Sawing capacity round 330 mm Sawing capacity flat 330 x 330 mm Max. Sawing speed 12 - 120 Saw blade dimensions 6830 x 41 x 1.3 mm Power 7.5 kW Dslim Nju Sq Eys H Uekl Saw weight 4300 kg

Condition: good (used), Band Saw, JAESPA CONCEPT 420 HAP, Used Machine Manufacturer: Jaespa Model: CON 420 HAP Overall Dimensions: 2530 x 1100 x 2060 mm Year: 2014 Weight: 2000 kg Electrical Data: 4 kW; 400 V; 16 A Cutting Area: 420 x 410 mm; Ø 420 Blade Size: 5300 x 34 x 1.1 mm Cutting Speed: 15-100 m/min Frequency-controlled, stepless band drive Stepless, hydraulic saw feed Durable guides with play-free and low-maintenance guide systems After cutting is completed, the console is raised to a manually pre-set height Hydraulic cutting pressure adjustment Hydraulic material clamping with long-stroke cylinder Automatic saw blade guide arm adjustment Equipped with a chip conveyor Key Features: Precision Cutting: Designed for high precision, the CONCEPT 420 HAP consistently delivers accurate cuts, making it an ideal choice for demanding manufacturing environments. Robust Design: Built for durability, this band saw machine offers long-term reliability even with intensive use. User-Friendly Operation: Designed with ease of use in mind, its intuitive controls allow operators to work efficiently and safely. Versatility: Suitable for cutting various materials, such as metals and plastics, making it a versatile choice for diverse industrial needs. Dslieua Etrom N H Uekl The machine is in excellent condition and ready for immediate use. Whether for series production or custom cutting tasks, the JAESPA CONCEPT 420 HAP is an excellent investment for your workshop or manufacturing facility. Don’t miss the opportunity to enhance your production capabilities with this top-of-the-line band saw. Contact us for more details or to schedule a viewing.

Condition: new, Year of construction: 2025, saw blade diameter: 400 mm, cutting capacity: 150 mm, warranty duration: 12 months, Standard Accessories Location points for 15° – 22.5° – 30° – 45° – 67.5° Fixing handle for locking at intermediate angles Dkelimov Hl S Hj N H Ujl Adjustable cutting speed for different types of profile Saw covering with safety switch Belt propulsion saw Two hand safety operation Easy to change saw blade 2 x Pneumatic vertical piston with clamps 1 x Air gun Optional Equipment Hydrocheck – Hydraulic speed adjustment for aluminum profiles Cooling system for aluminum cutting Auxiliary conveyor with rulers

Condition: new, Year of construction: 2025, The CORMAK MCB350HD cutter in this segment of machines is the largest cutter with very large cutting capacity of 350x260. It has a more powerful engine and a convenient control panel. Machine arm made of one-piece cast iron with additional ribs for greater rigidity. Reversible cutting angle from -45° to 60°. Machine characteristics The CORMAK MCB350HD metal band saw with CE enables cutting in a plane perpendicular to the axis of the cut material or at any angle in the range from -45 to +60 degrees. The cut piece can be fed manually or through any feeding device. The feed during cutting is gravitational based on the principle of oil flow in a two-chamber hydraulic cylinder. The operator starts the machine by pressing the start button and sets the cutting speed. When the cut is complete, the machine automatically stops and the operator raises the arm manually to the starting position. Feeding is done manually. This model is used for both unit and serial production, and due to its robust construction, it can cut a wide range of materials, including stainless steel, tool steel, solid materials and profiles. The device enables angular cutting of the material by turning the arm to the left and right. The cutter arm made of a uniform cast iron together with the 27 mm wide cutting band used in this cutter allows you to fully perform multi-series cuts of both profiles and solid materials. The arm is equipped with an automatic blade tension sensor, it is tilted by 25 degrees, which increases the life of the blade. A cleaning brush is attached to the bottom of the arm for perfect blade cleanliness and function. The drive of the machine is transmitted through a worm gear filled with gear oil. The machine has a three-phase motor with double windings and two cutting speeds. Motor thermal protection. This cutter has a very large range of work when cutting at an angle from 45º to the left to 60º to the right. The machine has two speeds of the cutting band: 32 and 72 m/min. A cutter with an automatic, smoothly adjustable, gravitational arm feed downwards. Construction: the frame, vice and rotating table are cast iron. Closed emulsion cooling system with fluid distribution to the blade guides. The machine is equipped with a bumper with a ruler for setting the length of the cut material. At the back of the machine there is a roller feeding the material to be cut. Safety during the cutting process is ensured by an electrical installation that meets all CE requirements. The machine has a limit switch that stops the machine after the cutting process is finished, an emergency switch, the so-called "safety mushroom", a series of microswitches that turn off the machine when, for example, we open the cover of the belt transmission or the cover of the cutting band. Technical data MINIMUM CUTTING DIAMETER - ø5mm MINIMUM LENGTH OF MATERIAL IN VISE - 100mm DISTANCE OF THE VISE BASE FROM THE GROUND - 940mm CUTTING BAND DIMENSIONS - 2950x27x0.9mm TOTAL POWER - 2.2kW TAPE SPEED - 36 / 72 m min-1 DRIVE/PULLEY DIAMETER - 330mm DIMENSIONS - 2000x1330x2020mm WEIGHT - 540kg ANGLE PIPE PROFILE SQUARE 0º-- ø270 350 × 240 260 x 260 45º R ø230 230 × 150 210 x 210 45º L ø200 200 × 170 170 x 170 Dkelimoi D Di Ss N H Uel 60º R ø140 140 × 140 140 x 140 The price is a net price. Price does not include shipping costs. For more information, please contact us by phone or e-mail. We invite you to familiarize yourself with the offer on our website.

Condition: good (used), Year of construction: 2002, Functionality: fully functional, machine/vehicle number: 526-02514, DoALL 2013-V3, 2013-V3 Vertical contour band saw Manufacture DoAll sawing Products U.S. Year of manufacture: 08/2002 S/N 526-02514 CE marked Variator drive Max. Working height 330 mm Maximum width up to the column 508 mm Capacity of the machine: b 20″ x b 13″ (508mm x 330mm) These vertical machines are one of the most versatile machines on the market! Vertical contour saws for cutting aluminum, brass, copper, mild steel, tough tool steel, stainless steel and sheet metal as well as cutting plastics and fiber materials. They are also available with a variety of attachments that allow for cutting contours, slices and more. The 2013-V2 has the same main structure, capacity and features as the 2013-V3. The only difference is the power of the motor: 2013-V3: 2.2kW/3HP, 400V, 50 Hz Standard equipment One set of high-speed guide blocks with inserts for belts from 3 to 13 mm One set of steel guide inserts for belts of 6, 10 and 13 mm Belt speed indicator Removable chip tray Belt tension indicator Chip blower (requires factory air) Handwheel for lifting the column AC drive with variable speed (speed control, soft start and dynamic braking functions) Belt door interlocks Dual range gearbox Dkslim Nsu A Ikho H Uel Gear oil One bi-metal band saw blade Operating instructions and spare parts manual

Condition: ready for operation (used), Package offer, which includes: ● a CNC-controlled Amada HFA530CNC automatic metal cutting band saw, Dkjlimsum U Elo N H Ujl ● two Amada CTB400 vertical hard metal cutting band saws, ● a KASTOtec A 3 Type 6600 Series 103 band saw. CNC-CONTROLLED AUTOMATIC METAL CUTTING BAND SAW HFA530CNC Fully automatic band saw. The weight of these machines is twice that of most conventional machines of similar capacity. By lowering the center of gravity, it paves the way for stable performance. Technical data: ● Cutting range: round 30-530mm rectangular width height 30x30-530x530 ● Work table load: 4000 kg ● Belt dimensions: 67x1.6x6670 mm ● Belt speed: 15-120 m/min inverter ● Belt tension: hydraulic ● Power supply: 400V ● Minimum cutting length: 10mm ● Control: CNC ● Power requirement: 13 kW ● Machine weight: 6,3t KASTOtec A 3 Type 6600 Series 103 Machine dimensions: - Length: 2140 mm - Width (without vortex conveyor): 3245 mm - Height: 2310 mm Total weight: 3800 kg Total drive power: 14.0 kW Saw motor drive power (standard: type A, F, S): 5.5 kW Cutting area: - round: 330 mm - square (H x W): 330 x 330 mm - flat (H x W): 330 x 430 mm - Smallest cutting dimension: 10 x 10 mm - Minimum cutting length: 6 mm - Minimum length of a single cut: 10 mm - Minimum cutting length in automatic mode: 35 mm - Maximum automatic single feed (standard): 600 mm - Maximum automatic single material feeding (options): 1500/3000 mm - Multiple material feeding: 9999 mm - Roller conveyor length: 1568 mm - Maximum piece weight: 2275 kg - Belt speed: infinitely adjustable 12-120 m/min HARD METAL NC VERTICAL BAND SAW AMADA CTB 400 TECHNICAL DATA: ●Cutting range: Cuts min. 30 mm Square cutting 430 mm Round cutting *200 mm Cutting lengths 5-9999 mm ●Saw blade motor 7.5 kw ●Saw blade dimensions 4715 x 41 x 1.3 mm ●Maximum load 2500 kg ●Cutting speed 15 - 150 m/min ●Machine dimensions 2632 x 2740 x 2422 mm ●Machine weight 4500 kg

Condition: like new (used), Year of construction: 2021, 18-inch aluminum saw, 3-horsepower motor, 2-phase, with a CMT cylinder, zero breakage, and the saw comes with all its accessories, a sander, a reinforcement ruler, a support, and all accessories. Dkolim N Hjwg R Rys Usl

Condition: excellent (used), Year of construction: 2013, Band saw, Semi-automatic saw, Metal saw, Metal band saw, Frame metal saw Toptech / Optimum GB 4240, Used machine Manufacturer: Toptech / Optimum Type: GB 4240 Year/month of manufacture: 2013/06 Inclusion dimensions: 2200 x 1100 x 2000 mm Electrical data: 400 V / 50 Hz / 4 kW Dkslim N Hom Akwzs Uel Tape size: 34 x 11 x 4320 mm Belt speed: 19-86 m/min - Hydraulic vise - Adjustable feed Material size: 400 x 400 mm

Condition: new, Year of construction: 2025, CORMAK HBS320 band saw for metal provides cutting at any angle from -45° to + 60°. The element cut can be fed manually or by any feeding device. The feed during cutting is gravitational on the principle of oil flow in a two-chamber hydraulic cylinder. Band saw perfect for cutting tubes, profiles and other materials. Machine characteristics CORMAK HBS320 band saw for metal provides cutting at any angle from -45° to + 60°. The element cut can be fed manually or by any feeding device. The feed during cutting is gravitational on the principle of oil flow in a two-chamber hydraulic cylinder. Band saw perfect for cutting tubes, profiles and other materials. Operator starts the machine by pressing the START button and sets cutting speed. After the cycle is finished the machine automatically stops and the operator lifts the arm to the starting position. The band saw arm is made of massive, uniform cast iron, and together with 27 mm wide cutting band enables high quantity cutting of structural steel, stainless steel and tools. The vice is located in an adjustable bed and equipped with a quick clamp. Blade guides are equipped with a ball bearings system and cemented carbides, ensuring excellent cutting precision and straight cut. It has a huge impact on the band guiding, its durability, accuracy and cutting quality. The carbide guiding drastically reduces the wear of both the machine and the blade. The base is enclosed, constituting a rigid welded body of steel sheets. A separate flood coolant container with an electropump is inside. The shape of the base upper part constitutes a tank for flood coolant draining and chips produced during cutting. Cast iron workbench is attached to the base, with a double-sided swivel arm and a control panel. The feed speed is controlled by the control panel. There are 2 cutting band speeds: 44 and 88 m/min. In rest arm position (after the cutting process) the cutting band drive is switched off automatically. Safety is ensured with cutting band guards and microswitches stopping the motor after cutting cycle is finished or after any of the guards are opened; additional protection consists of automatic switch-off of the band saw in case the cutting band breaks. Technical data Ø max 260 mm /perpendicular cutting H×B max 320×160 mm /perpendicular cutting Power supply - 3–phase, 400V Total power - 2.1 kW Arm lowering control - hydraulic cylinder Band dimensions - 2740×27×0.9 mm Cutting speed - stepless 0–50 m/min Band speed - 44 / 88 m/min Dslimei D Dgwj N H Uekl Vice base height - 920 mm Dimensions - 1400×880×1550 mm Weight - 330 kg Cutting parameters Angle 0º ---- ø260 320×160 255×255 45º R ø210 210×200 210×210 60º R ø135 135×130 130×130 45º L ø160 220×130 160×160 The price is a net price. Price does not include shipping costs. For more information, please contact us by phone or e-mail. We invite you to familiarize yourself with the offer on our website.

Condition: ready for operation (used), Year of construction: 1998, Functionality: fully functional, machine/vehicle number: 119951, saw blade diameter: 760 mm, overall weight: 3,200 kg, Kaltenbach RKT 760 V Cold cutting circular saw designed for metalworking, often used in the steel and metalworking industries for precision cutting. TECHNICAL SPECIFICATIONS: -Disc diameter: up to 760 mm (it is also possible to use a disc with a diameter of 710 mm) -Power requirement: 5 kW Dkolim Njumkyls H Ujl -Machine weight: about 3.2 tons -Dimensions: approximately 2.3 x 2.15 x 2.1 meters -Cutting feed speed: adjustable from 0 to 1200 mm/min, with quick return at 3500 mm/min. -Cutting speed at 710 mm saw diameter: 11/22 m/min two-stage with V-belts -Range of gearbox adjustment: 200 mm -Cutting width: 6 mm maximum. -Production year 1998

Condition: new, Year of construction: 2025, Band saw for metal, with optimal cutting range, commonly used in carpentry, production and craft facilities. Machine description Universal CORMAK BS 712 A band saw with CE marking is a trusted solution for metal cutting, unparalleled for years. Features high efficiency and easy handling. Makes it possible to cut in vertical plane and perpendicular to the cut material axis, or at any angle in 45°–90° range. Element cut can be fed manually or by any feeding device. The feed during cutting is gravitational on the principle of oil flow in a two-chamber hydraulic cylinder. Suitable speed of arm lowering is obtained thanks to the valve controlling oil flow between the hydraulic cylinder chambers. Required band linear velocity is obtained by changing the ratio on the belt pulley between the worm gear and the driving motor. Rugged, stable and refined construction as well as the arm made of uniform cast iron provide high rigidity and stability while cutting, ensuring accuracy and long-term reliability. The design of the 20 mm saw blade used in the machine makes it possible to cut large quantities of elements. Technical data Cutting band size 2360×27×0.9 mm Band tension mechanical (manual) Band speeds 22, 33, 45, 65 m/min Feed speed 0–50 m/min (stepless feed) Arm lowering control stepless – hydraulic cylinder Power supply 3-phase 400V Main motor power 1.1 kW Weight 190 kg Angle 0°.....180 mm....300×180 mm.....180×180 mm 45°.....130 mm....120×125 mm.....125×125 mm Machine construction Cutting band transmission system is composed of two cast iron wheels. The first wheel is a tensioning wheel (adjusted with a lever) and the second one is a drive wheel. Torque from the worm gear is directly transmitted to the tensioning wheel, while the worm gear is driven by an electric motor. Appropriate band angle is ensured through a set of roller bearings. Dkjlimemtwrpj N H Uel The base of the machine is a rigid cuboid made of steel sheets inside which is a cooling fluid container with a flood coolant pump. Due to swivel vice it is possible to cut material at 0°–45° angles. Tank for flood coolant draining and a container for chips are fixed to the upper part of the machine. Cast iron workbench is attached to the tank, which in turn is equipped with a vice for material clamping and to which the arm of the band saw is fixed. In the lower part of the machine base are holes for wheel axles. Safety during cutting process is ensured by an electric installation meeting all CE requirements. The machine is equipped with a limiting switch that stops the machine after cutting process is finished, an emergency button, a number of microswitches that switch the machine off when, e.g., the belt transmission guard or cutting band guard are opened. Additionally, our machine, as opposed to competitors, is equipped with a wire brush for band cleaning – it prevents the blade from blocking and ensures a more effective cutting. The price is a net price. Price does not include shipping costs. For more information, please contact us by phone or e-mail. We invite you to familiarize yourself with the offer on our website.

Condition: ready for operation (used), Year of construction: 2004, machine/vehicle number: 40850152, saw band length: 4,715 mm, saw band width: 41 mm, total height: 2,630 mm, total length: 2,740 mm, total width: 2,420 mm, cutting range round at 90°: 200 mm, cutting range square at 90°: 430 mm, cutting length (max.): 9,999 mm, power: 7.5 kW (10.20 HP), net weight: 4,500 kg, HARD METAL NC VERTICAL BAND SAW AMADA CTB 400 TECHNICAL DATA: ●Cutting range: Cuts min. 30 mm Square cutting 430 mm Round cutting *200 mm Dkjlimetzcr Ns N H Ujl Cutting lengths 5-9999 mm ●Saw blade motor 7.5 kw ●Saw blade dimensions 4715 x 41 x 1.3 mm ●Maximum load 2500 kg ●Cutting speed 15 - 150 m/min ●Machine dimensions 2632 x 2740 x 2422 mm ●Machine weight 4500 kg

Condition: new, Year of construction: 2025, PROMOTIONAL PRICE! A professional, very powerful and efficient band saw for metal with an arm swivelling up to 45°. Perfect solution for carpentry, production and craft facilities. Its design and solid construction make it stand out from other machines. Dkolimeudixyo N H Usl Product features This universal machine enables cutting in vertical plane and in the plane perpendicular to the axis of the cut material, or at any angle in 45°–90° range. Element cut can be fed manually or by any feeding device. The feed during cutting is gravitational on the principle of oil flow in a two-chamber hydraulic cylinder. Required band linear velocity is obtained by changing the ratio on the belt pulley between the worm gear and the driving motor. Suitable speed of arm lowering is obtained thanks to the valve controlling oil flow between the hydraulic cylinder chambers. Arm made of shaped spheroidal cast iron secures rigidity during operation and absorbs all vibrations. Control panel is situated close by the worm gear. Cutting band transmission system is composed of two cast iron wheels. The first wheel is a tensioning wheel (adjusted with a lever) and the second one is a drive wheel. Torque from the worm gear is directly transmitted to the tensioning wheel, while the worm gear is driven by an electric motor. Appropriate band angle is ensured through a set of roller bearings. The base of the machine is a rigid cuboid made of steel sheets inside which is a cooling fluid container with a flood coolant pump. Tank for flood coolant draining and a container for chips are fixed to the upper part of the machine. Cast iron workbench is attached to the tank, which in turn is equipped with a vice for material clamping and to which the arm of the band saw is fixed. In the lower part of the machine base are holes for wheel axles. Safety during cutting process is ensured by an electric installation meeting all CE requirements. The machine is equipped with a limiting switch that stops the machine after cutting process is finished, an emergency button, a number of microswitches that switch the machine off when, e.g., the belt transmission guard or cutting band guard are opened. Additionally, our machine, as opposed to competitors, is equipped with a wire brush for band cleaning – it prevents the blade from blocking and ensures a more effective cutting. NEW Arm construction allows for changing the machine from horizontal into vertical with workbench in just a moment. This is not only useful for metal cutting but also as a jigsaw machine for carpentry. Technical data Cutting band size 2360×20×0.9 mm Band tension mechanical (manual) Band speeds 34, 41, 59, 98 m/min Feed speed 0-50 m/min (stepless feed) Arm lowering control stepless - hydraulic cylinder Vice base height 600 mm Power supply 3-phase 400V Main motor power (kW) S1 100%: 0,75; S6 40%: 1.1 kW Weight 190 kg Dimensions 1250×700×1000 mm Warranty 12/24 months User manual yes CE Declaration yes Angle 0° 180 mm 180×210 mm 180×180 mm 45° 130 mm 140×90 mm 130×130 mm Additionally 2 M42 saw blades 5L Emulsol ZW580 magnetic chip collecto

Condition: ready for operation (used), Year of construction: 2004, Functionality: fully functional, machine/vehicle number: 6600 103 001, total length: 2,140 mm, total width: 3,240 mm, cutting speed: 12,000 mm/min, cutting range round at 90°: 330 mm, workpiece weight (max.): 2,275 kg, cutting range square at 90°: 330 mm, power: 14 kW (19.03 HP), net weight: 3,800 kg, KASTOtec A 3 Type 6600 Series 103 Machine dimensions: - Length: 2140 mm - Width (without vortex conveyor): 3245 mm - Height: 2310 mm Total weight: 3800 kg Total drive power: 14.0 kW Saw motor drive power (standard: type A, F, S): 5.5 kW Cutting area: - round: 330 mm - square (H x W): 330 x 330 mm - flat (H x W): 330 x 430 mm Dkolim Njtw D H Us H Uol - Smallest cutting dimension: 10 x 10 mm - Minimum cut length: 6 mm - Minimum length of a single cut: 10 mm - Minimum cutting length in automatic mode: 35 mm - Maximum automatic single feed (standard): 600 mm - Maximum automatic single material feeding (options): 1500/3000 mm - Multiple material feeding: 9999 mm - Roller conveyor length: 1568 mm - Maximum piece weight: 2275 kg - Belt speed: infinitely adjustable 12-120 m/min

Condition: new, Year of construction: 2025, CORMAK S-200RHA automatic band saw is an incredibly efficient machine in automatic cutting of tubes, steel and cast iron profiles as well as non-ferrous metals. Rugged body and strong frame of the saw ensure great rigidity and stability during cutting even the toughest metals. This machine allows for cutting manually at -30º- +60º and automatically at 0-45º. Technical data Type automatic Arm lowering and raising hydraulic with smooth arm lowering adjustment Band speed Dkelisvxhrtsm N H Usl inverter 0-90 m/min Cutting at angles from 30° left to 60° right Vice hydraulic Minimum cutting diameter Ø 5 mm Minimum material length in the vice 30 mm Vice base height 780 mm Cutting band 27×0,9×2910 mm Total power 4.1 kW Dimensions (LxWxH) 2250×1600×1600 mm Weight 1100 kg

Condition: ready for operation (used), Year of construction: 2006, Functionality: fully functional, saw band length: 6,670 mm, saw band width: 67 mm, cutting capacity: 530 mm, table height: 830 mm, overall weight: 6,300 kg, height adjustment type: hydraulic, power: 7.5 kW (10.20 HP), saw blade length: 6,670 mm, net weight: 6,300 kg, AUTOMATIC CNC CONTROLLED METAL CUTTING BAND SAW HFA530CNC Fully automatic band saw. The weight of these machines is twice that of most conventional machines with similar performance. By lowering the center of gravity, it paves the way for stable performance. Technical data: ● Cutting range: circular 30-530mm rectangular width height 30x30-530x530 Dkolim Notumdie H Uel ● Work table load: 4000 kg ● Belt dimensions: 67x1.6x6670 mm ● Belt speed: 15-120 m/min inverter ● Belt tension: hydraulic ● Power supply: 400V ● Minimum cutting length: 10mm ● Control: CNC ● Power requirement: 13 kW ● Machine weight: 6,3t