Used horizontal band saws - half-automatic - cutting range 0-300mm for sale (122)

Condition: excellent (used), Year of construction: 2017, functionality: fully functional, control type: manual, actuation type: electric, total height: 2,000 mm, total length: 2,000 mm, total width: 1,000 mm, overall weight: 700 kg, Equipment: CE marking, chip conveyor, documentation/manual, lighting, rotational speed infinitely variable, COSEN SH-4030, semi-automatic horizontal metal bandsaw Technical data: Godpfszy Nzhsx Amyeug Manufacturer: COSEN Mechatronics Co., Ltd. Model: SH-4030 Machine type: Horizontal metal bandsaw Year of manufacture: 01/2017 Electrical connection: 400 V / 50 Hz / 3 phases Rated power: 4.5 kW Rated current: 10.52 A Bandsaw blade dimensions: 3820 x 34 x 1.1 mm Cutting speed: 20 – 100 m/min Coolant pump: 0.09 kW Hydraulic power: 0.75 kW Hydraulic pressure: 3 MPa Max. cutting range: Round material: Ø 300 mm Square material: 300 x 300 mm Rectangular material: 300 x 400 mm Machine weight: approx. 700 kg Model designation: COSEN SH-4030

Condition: used, Year of construction: 1995, machine/vehicle number: G940311, power: 0.96 kW (1.31 HP), cutting height (max.): 320 mm, cutting width (max.): 320 mm, pivoting range: 105 °, total height: 1,670 mm, total length: 1,900 mm, total width: 1,000 mm, overall weight: 720 kg, table height: 870 mm, Equipment: documentation/manual, Please refer to the documentation and images for a description. Gedpszz Hdvefx Amysug

Condition: good (used), Year of construction: 2018, Well-maintained, semi-automatic bandsaw from MEP. Gujdpfx Amozyvdijyjg Type: Shark 282 SXI evo Year of manufacture: 2018 Speed range: 36/72 m/min Saw band dimensions: 2950x27x0.9 mm Total power consumption: 1.5 / 1.8 kW Machine weight: approx. 470 kg Cutting diameter: 250 mm Cutting capacity at 90 degrees: flat 280 x 220 mm Cutting capacity at 90 degrees: square 220 x 220 mm Cutting capacity at 45 degrees: flat 220 x 200 mm Cutting capacity at 45 degrees: round 230 mm Cutting capacity at 45 degrees: square 200 x 200 mm Cutting capacity at 60 degrees: flat 140 x 100 mm Cutting capacity at 60 degrees: square 100 x 100 mm Cutting capacity at 60 degrees: round 150 mm #

Condition: refurbished (used), Year of construction: 2007, Used automatic hydraulic band saw for metal MEP SHARK 332 NC EVO Blade dimensions: 3320x27x0.9mm Guodpszyfwrofx Amyeg Cutting angle: from 45° to +60° Operating modes: manual, semi-automatic-dynamic, semi-automatic, automatic Cutting speed: 15-100m/min (inverter) Cutting capacity: at 0° - round 300mm - square 260mm - rectangle 330x260mm Dimensions: 2600x2320x2000mm Year of manufacture: 2007 Weight: 1050kg The machine has been fully refurbished and tested.

Condition: good (used), Year of construction: 2016, cutting diameter 300 mm capacity 90 degrees: flat 320 x 290 mm capacity 45 degrees: flat re 300 x 280 mm capacity 45 degrees: round re 300 mm capacity 60 degrees: flat re 190 x 200 mm capacity 60 degrees: round re 200 mm capacity 45 degrees: flat li 270 x 200 mm capacity 45 degrees: round li 270 mm turning speed range: 20 - 100 m/min saw band length 3660 x 27 x 0.9 mm power capacity 2.4 kW weight of the machine ca. 650 kg range L-W-H 2050 x 1170 x 1600 mm Current list price: approx. 15.000 euros Gjdpjzv Ul Dsfx Amysug Special price available upon request Features: - Semi-automatic electro-hydraulic band saw (INDUSTRIE) - Suitable for single-piece and small-batch production - Large, ball-bearing-mounted cast-iron turntable * For miter cuts from 45° left to 60° right - Hydraulic feed mechanism Material clamping - Ergonomic control panelâ??front right, swiveling - Coolant system - Operatoration manual * Semi-automatic work cycle: After the cycle starts, the vise closes automatically, the saw frame lowers for the cut and automatically raises back to the predefined starting position once the cut is complete. Afterward, the vise opens.

Condition: as good as new (ex-display), Year of construction: 2024, type of input current: DC, cutting height (max.): 285 mm, cutting range round steel at 45°: 230 mm, cutting range round steel at 90°: 250 mm, saw band length: 2,950 mm, saw band width: 27 mm, Title MEP SHARK 282 CCS [with semi-automatic lowering] Article number SH282CCS Motor power 1.5/1.8 kW Belt opening 285 mm Belt dimensions 2950x27x0.9 mm Weight 440 kg Speed 36/72 m/min. Cutting surface 0° 250 / 220x220 / 280x220 Cutting surface 45° right 230 / 200x200 / 220x200 Cutting surface 45° left 200 / 170x170 / 200x140 Cutting surface 60° right 120 / 80x80 / 140x80 Cutting surface 60° left Description MEP sawing machine: Basic equipment: Vice with quick adjustment and adjustable guide rails Hydraulic band clamping device with clamping pressure indicator Underframe with removable coolant tray Chip clearing brush Adjusted precision stops for cuts of 0°, 45° and 60° left and 45° right Length stop for cuts of the same length Material support arm, simultaneous connection option for roller conveyor/loading side Turntable for double mitre cuts Machine is designed for pallet truck/forklift transport M2 bi-metal band saw blade for solid and profiled material Tools and operating instructions Electrical equipment: Control panel labeled cable connections Control lamp for operational readiness Main safety switch Emergency stop button Speed changeover switch Gjdpfx Amjzzktheyoug Thermomagnetic protection Undervoltage release Control handle IP 55 protected Phase comparator Low voltage system 24 Volt Electrical coolant system 48 V (attachment of a micro-spraying device possible) Motor 1.5/1.8 KW 2 speeds 36/72 m/min. Vice opening 285 Saw band 2950 x 27 x 0.9 Weight 440 kg

Condition: used, Year of construction: 2019, cutting diameter 250 mm capacity 90 degrees: flat 280 x 220 mm capacity 90 degrees: square 220 x 220 mm capacity 45 degrees: flat 220 x 200 mm capacity 45 degrees: round 230 mm capacity 45 degrees: square 200 x 200 mm capacity 60 degrees: flat 140 x 100 mm capacity 60 degrees: square 100 x 100 mm capacity 60 degrees: round 150 mm Godpfxjzvhkme Amyjug vice 285 mm turning speed range: 36/72 m/min dimensions of saw-band 2950x27x0,9 mm total power requirement 1,5 / 1,8 kW weight of the machine ca. 460 kg dimensions of the machine ca. 1150 x 1970 mm Features: - Robust electro-hydraulic semi-automatic band saw (INDUSTRIE) - With miter cuts from 45° right to 60° left * Mitre adjustment via a large turntable - MEP EVO microprocessor control for managing all functions * Front right, swiveling - Optional manual or automatic lowering of the saw frame * Stepless adjustment of the saw frame lowering - Saw blade guide made of carbide plates - Hydraulic saw blade tensioningâ??includes digital display - 2 saw blade speeds - Coolant system - 1 angle stop - Chip removal brush - Machine base frame with forklift pockets - Operating instructions in German - Replacement saw bands Semi-automatic operation: - Electro-hydraulic clamping of the vise - Electro-hydraulic lowering of the saw frame - Electro-hydraulic lifting of the saw frame - Electro-hydraulic opening of the vise *Optional equipment: - 2000 mm feed roller conveyor - 2000 mm discharge roller conveyor, including stop

Condition: reconditioned (used), Year of construction: 2001, functionality: fully functional, Automatic bandsaw machine with bow, vice movement, and material feed controlled hydraulically. Automatic fast up/down bow movement controlled by a feeler pin. Downfeed with infinitely small adjustment. CNC control for all machine functions and the ability to store up to 99 cutting programs. (TOUCH model with a 7” touch screen). Mechanical blade tensioning controlled by a limit switch. Perimeter safety guard, double safety button for cycle start, and low-voltage electrical system in accordance with EC regulations. The machine can be equipped with an automatic loading unit and roller conveyors with related accessories. Guedpfjzm S Iwsx Amyjg

Condition: good (used), Year of construction: 2021, Mitre cuts up to 60° left and 45° right Gedpfx Amsyuyb Nsysug Cutting capacity at 90 degrees: round 255 mm Cutting capacity at 90 degrees: square 240 mm Cutting capacity at 90 degrees: rectangular 300 x 180 mm Saw band length: 2,765 x 27 x 0.9 mm Table height: 950 mm Infinitely variable band speed: 18 - 110 m/min Total power requirement: 1.5/1.8 kW Machine weight approx. 420 kg Ball-bearing rotary table Quick-release vice Large material support Coolant system Including: Infeed roller conveyor 2x2000 mm Measuring unit 4000 mm on the discharge side with digital display

Condition: good (used), Year of construction: 2011, cutting diameter 290 mm capacity 90 degrees: flat 320 x 290 mm capacity 45 degrees: flat re 240 x 150 mm capacity 45 degrees: round re 240 mm capacity 60 degrees: flat re 150 x 180 mm capacity 60 degrees: round re 150 mm capacity 45 degrees: flat li 240 x 100 mm Gusdpfxezv Ulws Amyog capacity 45 degrees: round li 240 mm turning speed range: 20 - 100 m/min saw band length 3100 x 27 x 0.9 mm power capacity 2.4 kW weight of the machine ca. 570 kg range L-W-H 1800 x 950 x 1550 mm Current list price: approx. 12.000 euros Special price upon request Features: - Semi-automatic electro-hydraulic band saw (INDUSTRIE) - Suitable for single-piece and small-batch production - Large, ball-bearing-mounted cast-iron rotary table * For miter cuts from 45° left to 60° right - Hydraulic cutting feed Material clamping - Continuously variable band speed (Model "F") - Ergonomic control panel - Micro-spray lubrication system (spray oiler) - 2x PEGAS roller conveyor - Operating instructions in German * Semi-automatic work cycle: After the cycle starts, the vise closes automatically; the saw frame lowers for the cut and automatically raises back to the predefined starting position once the cut is complete. Afterward, the vise opens.

Condition: used, Year of construction: 2008, functionality: fully functional, operating hours: 1,757 h, power: 5 kW (6.80 HP), input voltage: 400 V, input current: 16 A, input frequency: 50 Hz, type of input current: three-phase, cutting height (max.): 250 mm, cutting width (max.): 250 mm, control type: NC control, overall weight: 1,700 kg, Equipment: documentation/manual, For sale is a KASTO KASTOtwin A2 fully automatic bandsaw from 2008. The machine was in use until recently, has been regularly maintained, and operates reliably. It will be thoroughly cleaned before collection. Technical specifications: Manufacturer: KASTO Type: KASTOtwin A2 Machine No.: 6459 104 007 Year of manufacture: 2008 Control system: KASTO BasicControl Connection: 400 V / 50 Hz, 3~ Connected power: 5.0 kW / 16.0 A Weight: approx. 1,700 kg Operating hours (control system): 3,756.6 hours Operating hours (saw): 1,702.9 hours Total number of pieces cut: 12,480 Equipment: Roller conveyor 4,100 mm Guedpfx Amjzyarwoyog Chip conveyor Coolant system Several new, unused saw blades included Operating manual and documentation available The machine can be inspected and demonstrated in operation after prior arrangement. Loading is possible without any problems; a forklift is available on site. Invoice with VAT shown. Sold as a used machine, excluding any warranty, guarantee, or right of return.

Condition: used, Year of construction: 2002, machine/vehicle number: 021203, Machine Name - Mega saw Machine Model - H1830 s.n 021203 Specification - Year 2002 Gjdpfxswxmhls Amysug 3.7kw Main motor Semi- automatic 82- 250 FPM Variable speed control Max bar cutting size 460mm In-built coolant tank with pump and screw auger. Manual vice

Condition: excellent (used), Year of construction: 1998, functionality: fully functional, year of last overhaul: 2020, Equipment: CE marking, Automatic Bandsaw - Crosscut and straight cut - machine was refurbished in 2020 and is in excellent condition - nice and simple to use - built to last, made in Italy. Guedpfxoy S Dbpe Amyeg

Condition: excellent (used), Year of construction: 2021, functionality: fully functional, power: 9 kW (12.24 HP), cutting width (max.): 450 mm, control type: CNC control, overall weight: 6,100 kg, Equipment: CE marking, documentation/manual, in production from 2023 / 1 shift only, 6200 hours band 6830 x 54x1,3 It is a highly efficient automatic,band-saw with multiple material feed. Bandsaw is designed for performance cutting of very hard and tough materials. This bandsaw is using extremely robust construction optimized with target to get maximum rigidity of machine and minimum vibrations. Stroke of frame and feeder stroke is realized by sharpened ball screws. Machine guarantees maximum possible power a precision. The machine is designed for vertical cuts. It is suitable for serial production in industrial premises. The machine is designed to saw steel materials, but also non-ferrous and light metals. However, we recommend consulting the manufacturer about this option. Conception of bandsaw is FCV= feeder-cut-main vice. Conception FCV enable cut material in automatic cycle with shortest possible end. Cutting parameters The shortest cutting mm 10 The smallest divisible diameter mm 30 The shortest rest during one cut mm 40 The shortest rest during automatic cut mm 90 Single step of material feed Min mm 3 Single step of material feed Max mm 730 Multiple feed mm 19999 Performance parameters Blade dimensions mm 6830x54x1,3 Blade speed m/min 20-150 Blade drive kW 9 Pump of the cooling emulsion kW 0,16 Gjdpfoykkqgsx Amyeug Blade cleaning brush motor kW 0,12 Chip conveyor motor kW 0,12 Motor of the blade drive cooling kW 0,6 Frame ballscrew motor kW 0,5 Feeder ballscrew motor kW 1,5 Electric input Ps kW 17,7 Installed power Ps kW 12,8 Electrical connection 3 x 400V, 50Hz, TN-S

Condition: used, Year of construction: 1993, functionality: fully functional, SEGATRICE usata SEMIAUTOMATICA, A DISCESA VERTICALE, TAGLIO A 60° DX-SX, da 1000x600,BIANCO BTM 100.60 dx- sx. Gjdpfx Ajzhunvjmysug TAGLIO A 60° DX-SX, da 1000x600, PREZZO MACCHINA VISTA E PIACIUTA,DA REVISIONARE. POSSIBILITA' DI REVISIONARLA A NUOVO

Condition: used, Year of construction: 2002, functionality: fully functional, Blade length up to 275 mm Gusdpfozq Dpujx Amysg Year 2002 Automatic cutting cycle Blade descent on columns Blade speed variation Descent speed adjustment Blade cleaning brush Loading stroke 500 Pressure reducer for clamps BLADE HEIGHT 27 mm

Condition: ready for operation (used), Bandsaw – Horizontal KASTO BSM 260 / 400 - Maximum cutting height: 260 mm - Cutting range, flat/rectangular: 400 x 260 mm - Miter cutting device - Cutting speed, continuously adjustable: 17-110 m/min - Drive power: approx. 2.2 kW - Saw blade dimensions: 4310 x 27 x 0.9 mm Guodpfozifc Tex Amyog - Coolant system - Roller support - Well-maintained, good overall condition Dimensions: L x W x H: 2.5 x 1.2 x 1.5 meters / 1300 kg Errors and omissions excepted.

Condition: good (used), Used band saw from Bewo Model MOD 250 Capacity 200 x 250 mm Gusdpfezvyf Asx Amyog Manually operated

Condition: used, Year of construction: 2008, overall weight: 1,700 kg, cutting capacity: 260 mm automatic clamps automatic cycle weight: 1700 kg Gujdpfxozx Smke Amysg

Condition: used, Year of construction: 2009, Large, robust saw from the renowned manufacturer MEP SHARK CCS HYDRA - Fully semi-automatic - Cutting diameter for round stock: 300 mm Gsdpjy Ani Ejfx Amyoug - Capacity: 320x260 mm - Swivel LEFT/RIGHT - Saw band: 3320x27x0.9 mm - Coolant pump - Automatic vise pressure - Machine weight: 700 kg - Original roller table (100 kg) - Includes 3 new saw bands - Original documentation The machine is original, in very good technical condition, ready for operation. Can be viewed in Głosków near Warsaw.

Condition: excellent (used), Year of construction: 2020, power: 1.5 kW (2.04 HP), total height: 2,000 mm, total length: 1,930 mm, total width: 1,610 mm, Band saw PILOUS - ARG 235 Plus Bandsaw mitre cutting left & right Ø 235 Optional roller conveyor D-300 x 2000 mm = EUR 550(6 rollers / 60 diameter / 300 Kg load 1 Mtr)  Optional roller conveyor D-300 x 3000 mm = EUR 650(10 rollers / 60 diameter / 300 Kg load 1 Mtr.) Capacity 90°: 235° Gsdpfx Aozc Imijmyoug Cutting flat 90°: 280 x 180mm Capacity L 45°: 185° Capacity R 45°: 115° Cutting speed Vario:40 + 80 Circle blade size: 2710 x 27 x 0,9mm Power: 1,5kW Length: 1930mm Width: 1610mm Height: 2000mm Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: good (used), Year of construction: 2004, Bandsaw in good condition + 2 extra new bandsaw blades. Gsdpfjy Txb Tex Amyoug

Condition: used, Year of construction: 2005, Technical Data: Cutting capacity: 90° round: 260 mm 90° flat: 300 x 260 mm 90° square: 260 x 260 mm +45° round: 200 mm +45° flat: 200 x 240 mm +45° square: 200 x 200 mm +60° round: 165 mm +60° flat: 160 x 120 mm +60° square: 150 x 150 mm -45° round: 200 mm -45° flat: 200 x 240 mm -45° square: 200 x 200 mm Shortest residual piece length: 35 mm Total connected load: 2.0 kW Saw motor, frequency-controlled: 1.5 kW Infinitely variable cutting speed (frequency-controlled): 20 - 110 m/min Saw band dimensions: 2910 x 27 x 0.9 mm Dimensions and weight: Gujdex Irx Iopfx Amyeg Length, approx.: 1020 mm Width, approx.: 1830 mm Height, upper part lowered, approx.: 1460 mm Height, upper part fully raised: 1900 mm Material support height: 950 mm Total weight, approx.: 510 kg Features: - Infinitely variable cutting speed - Saw band guides made of carbide, replaceable - Hydraulic saw feed - Mechanical saw band tensioning - Machine light - Saw band cleaning via freely rotating, easily replaceable wire brush - Coolant supply via 1 coolant nozzle and 1 coolant hose, coolant tank capacity approx. 45 l, pump capacity 16 l/min - Minimum quantity lubrication - Infeed roller conveyor (1000 mm) and outfeed roller conveyor (2000 mm) with scale and length stop

Condition: ready for operation (used), Year of construction: 1980, machine/vehicle number: 5780515, functionality: fully functional, Metora VMB280 hacksaw with automatic feed • Cutting capacity: up to 280 mm • Cutting angle: 90° and adjustable up to 45° • Automatic feed: adjustable, hydraulic feed for consistent cutting quality • Motor power: 1.5 kW • Cutting speed: 20 - 100 m/min (steplessly adjustable) Gedpfxjxxxubj Amysug • Weight: approx. 800 kg • Includes roller conveyor for 3 meters • Saw blade installed

Condition: used, functionality: fully functional, SCANTONATRICE AD ANGOLO REGOLABILE 250x4, FCT SC-250, USATA 'CE'.Revisionata, pronta a magazzino . Gusdjzh E Itopfx Amyeg