Used Cold saws - half-automatic - saw blade diameter 351-420mm for sale (51)

Condition: good (used), MITRE COLD CIRCULAR SAW MACHINE Type: KKS 400 H Year of manufacture: 1982 Equipment: - Infeed roller conveyor 1000 mm, left - Outfeed roller conveyor with length stop, 2000 mm, right Gedpfxoxnmn Uo Aacouh - Saw blade diameter: 370 mm - Hydraulic clamping cylinder with 8 mm stroke, handwheel for pre-setting - Documentation Condition: good, workshop inspected

Condition: used, Year of construction: 1979, saw blade diameter 380 mm cutting diameter 135 mm Guedpferw Dkgjx Aacoh single stroke device 700 mm power requirement 1,9 kW turning speeds 1500/3000 U/min weight of the machine ca. 1,36 t dimensions of the machine ca. 2,6 x 1,2 x 1,8 m Simple but stabil automatic Saw blade - minim. coolant - 9 blades Ø 350 - 370 mm - differend cutting speed via belts - documentation

Condition: used, Kaltenbach KKS 400 Technical Specifications Saw blade diameter: 370 mm Cutting diameter: 115 mm Gsdpfx Ajxhdvveacsuh Stroke: - mm Cutting area at 90 degrees, flat: 300 x 35 mm Cutting speed: 11 / 15 / 22 m/min Total power requirement: 1.4 kW Machine weight approx.: 850 kg Space requirement approx.: 1100 x 1100 x 1600 mm

Condition: used, Manufacturer: Kaltenbach Type: KKS Saw blade diameter 370 mm Cutting capacity 45° - 90° round 115 mm flat approx. 215 x 20 mm rectangular approx. 95 x 105 mm U-profile approx. 160 x 55 mm Speed: 14, 19, and 28 rpm Dimensions: 1100 x 1050 x 1600 mm (LxWxH) Weight: approx. 850 kg Equipment: • Semi-automatic operation • Hydro-pneumatic stepless saw blade feed • Mitre cuts on both sides R - L • 0° longitudinal cut possible Guedowpb E Hepfx Aacsh • Coolant system • 1 saw blade The machine can gladly be demonstrated under power on site. All information without guarantee. Errors and interim sale excepted.

Condition: excellent (used), Year of construction: 2017, Young used IMET circular saw with push-up system from PEHU Type Sirio 370 SH-E Push-up system PEHU Autopos 600L Gedewccupopfx Aacsuh Equipped with microdosing lubrication system Capacity ø 120 mm / rectangle 180x100mm / square 100x100mm Cutting speed 15 / 30 Miter 0-60 degrees left / 0-45 degrees right Saw blade 370 mm Saw machine was put into use in 2019, push-up system is from BJ 2019

Condition: used, Year of construction: 2005, saw blade diameter 400 mm cutting diameter 140 mm capacity 90 degrees: flat 210 x 120 mm capacity 90 degrees: square 140 mm Gedpfsvlaiksx Aaceuh capacity 45 degrees: flat 145 x 120 mm capacity 45 degrees: round 120 mm capacity 45 degrees: square 120 mm turning speeds 1 - 98 U/min. total power requirement 2,8 kW weight 0,75 kg range L-W-H 0,9 x 1,0 x 2,0 mm Cold circular saw incl. - Miter up to 60° - Micro spray device - Coolant system

Condition: good (used), Year of construction: 2005, functionality: fully functional, TRENNJAEGER TUS 470 with ball screw and heavy-duty spur gear for burr-free cold sawing of profile, panel, square, and round material in straight and miter cuts, pivotable on both sides from 90 degrees to 45 degrees to 30 degrees, with digital angle display (built in 2005) - Cutting range with saw blade ᴓ 450 mm: 90°, 45° right/left, 30° right/left - Round 140 mm 140 mm 130 mm - Square 110 x 110 mm 110 x 110 mm 110 x 110 mm Gedpfxev Ryaas Aacsuh - Rectangular 290 x 40 mm 190 x 40 mm 130 x 40 mm - Rectangular Profiles 290 x 70 mm 190 x 70 mm 130 x 70 mm This increases by approximately 10 mm for a saw blade ᴓ 470 mm - Maximum clamping range of the machine: 290 x 150 mm - Working height: 900 mm Machine is supplied without infeed and outfeed

Condition: good (used), Year of construction: 1997, functionality: fully functional, For sale is a Kaltenbach cold circular saw. Gearbox is free of play! Type: KKS 450 E Year of manufacture: 1997 The saw is equipped with a coolant pump and a minimum quantity lubrication system, both of which can be switched on as needed. Saw blade Ø: 450 mm Gujdpfx Aexmtivoacsh Motor power: 1.8/2.7 kW Cutting speed: 10/20, 13/26, 15/30 m/min Feed rate: 0 – 1,000 mm/min Rapid forward/reverse: 1,550 mm/min Max. working area: 150 mm Working area for square material: 140 mm Working area for flat material: 330 x 40 mm Working area for round material: 140 mm Min. working area: 10 x 10 mm Mitre range: 0° – 90° – 0° Dimensions (LxWxH): 1,080 x 900 x 1,760 mm Weight: 1,000 kg Inspection / collection in 89558 Böhmenkirch Shipping available upon request Forklift available for loading.

Condition: not inspected (used), Year of construction: 1991, functionality: unexamined, saw blade diameter: 400 mm, cutting height (max.): 120 mm, Automatic circular saw for aluminium. Mitre device and chip conveyor. Cutting range round approx. 120 mm. The machine comes from a trade-in, untested. According to our customer, it worked until the end. Since we have not carried out a functional test, the sale is made excluding any warranty, and returns are not possible. Guodpfjxlcd Hjx Aacsh

Condition: used, Year of construction: 2004, cutting diameter 120 mm saw blade diameter 370 mm vice 190 mm capacity 90 degrees: flat 180 x 95 mm capacity 45 degrees: round 110 mm capacity 45 degrees: flat 125 x 95 mm capacity 60 degrees: round 90.0 mm capacity 60 degrees: flat 90 x 95 mm dimensions of saw-blade 370 x 32 x 2,5 mm cutting speed 15 - 150 m/min engine output 3.0 kW weight 640 kg range L-W-H 900 x 1500 x 1910 mm New price ~ 16.000 euros - in checked condition - machine video - ?v=gxj5GWtTcDE Furnishing : - semi-automatic vertical metal circular saw - with miter adjustment 60 ° left / 45 ° right Gjdpfx Aoxabrxjacouh - swiveling control panel, front left - The saw head slides on linear double guides - pneumatic vice clamping - pneumatic saw blade feed, stepless - Infinitely variable speed adjustment from the saw blade - 2x replacement saw blade - Machine frame with coolant device - Operation manual

Condition: good (used), Year of construction: 1991, functionality: fully functional, overall weight: 1,350 kg, Kaltenbach KKS 401 Fully functional Condition very good. Godpfx Aoui R Dpeacsuh

Condition: new, saw blade diameter 370 mm capacity 90 degrees: round 120 mm capacity 90 degrees: square 100 mm 180x100 mm Working height 925 mm saw blade turning speeds 15+30 oder 30+60 U/min total power requirement 1,8/2,2 kW weight of the machine ca. 0,44 t Gjdpfxsd Iin Ij Aacsuh dimensions of the machine ca. 0,8 x 1,1 x 2,1 m SPECIAL PRICE!!! High-performance vertical circular saw Hydropneumatic semi-automatic. (20185/ 20188) · miter left 60° + right 45° · Vice with double clamping arm · Robust prism guide of the saw head, adjustable dovetail guide. · Chip brush · Automatic cooling · Metal tension wheel for high power transmission c. · Solid, strong cast iron table Semi-automatic function: 1. Clamp material 2. Saw starts 3. Rapid lowering to the beginning of the material or cut the same for series cutting 4. Saw band off 5. Raise the frame to just above the material 6. Open the vise MPS control: · Save cut start/end · Display of current consumption, number of pieces, cutting time... · Adjustable water cooling · Cutting pressure regulator ATTENTION: Price is without saw blade!!! (saw blade price EUR 204)

Condition: good (used), Year of construction: 1984, machine/vehicle number: 102335, Offer 23172 Technical data: - Saw blade diameter up to 400 mm - Cutting range with saw blade diameter 400 mm - at 90° round 130 mm Gusdpormkl Aofx Aacjh - square 120 mm - flat up to 260 x 60 mm - Mitre adjustment left + right 0 - 90 ° - Cutting speed 1750 / 3500 m/min - Feed speed of the saw blade 0 - 3 m/min - Rapid return 3000 mm/min - Saw drive 400 V / 3.7 / 4.4 kW - Pneum. Material vice with adjustable clamping pressure - Space requirement approx. W 1200 x H 1900 x D 1200 mm - Weight approx. 600 kg - Outfeed roller conveyor 3000 mm - Infeed roller conveyor 3000 mm

Condition: good (used), Year of construction: 1991, functionality: fully functional, Semi-automatic cold circular saw Make: Kaltenbach Model: KKS 400 E Year: 1991 Technical data: Manufacturer: Kaltenbach Model: KKS 400 E Year of manufacture: 1991 Saw blade diameter: 400 mm Gearbox with speeds: 14/28 m/min -Cutting range at 90° flat: 120×120 mm -Cutting range at 45° flat: 305×40 mm -Cutting range, round material: 130 mm -Cutting speed: 14/28 m/min Total power requirement: 3.5 kW Machine dimensions: L 1.0 x W 1.0 x H 1.90 m (plus roller conveyors) Weight: 1,250 kg + roller conveyors Equipment: - 3 m right-hand stop with roller conveyor - Left-hand roller conveyor, L = 1.5 m All information is provided without guarantee. Godew U Dbgopfx Aacsuh A demonstration is possible at any time in our showroom.

Condition: used, 1 used cold sawing machine KALTENBACH KKS 400 Technical data: Saw blade diameter: 400 mm Godeq Ukvxepfx Aacjuh Cutting diameter: 130 mm Cutting area flat: 315x40 mm Cutting area square: 120x120 mm Total power requirement: 1.5 kW Space requirement approx.: 1200 x x1000 x 1700 mm Machine weight approx.: 1250 kg Manufacturer's description; The powerful drive provides the prerequisite for high cutting performance, long service life of the saw blades and perfectly clean cut surfaces. All gears are hardened and flank-ground. The entire gearbox runs in an oil bath; all bearing points have roller bearings. Various speeds can be achieved by means of gear wheels, the cutting speeds of which are switched electrically by pole-changing motors. The tried and tested saw blade guide in a strong pivot bearing is subject to practically no wear. It is rigid and allows work within the tightest tolerances. The hydraulic feed of the saw blade is infinitely adjustable according to Skla.

Condition: refurbished (used), Year of construction: 1980, For sale: Kaltenbach cold circular saw – Various versions and models in stock. The machine has been extensively overhauled both technically and visually. Gearbox, of course, backlash-free! Type: KKS 400 H Gedpfoxcf T Eex Aacouh Saw blade diameter: 400 mm Motor power: 1.8/2.7 kW Cutting speed: 10/20, 13/26, 15/30 m/min Feed rate: 0 - 1,000 mm/min Rapid approach/return: 1,550 mm/min Maximum working range: 130 mm Square material working range: 120 mm Flat material working range: 305 x 20 mm Round material working range: 130 mm Minimum working range: 10 x 10 mm Miter range: 0° - 90° - 0° Dimensions (LxWxH): 1,080 x 900 x 1,760 mm Weight: 850 kg Inspection/collection in 89558 Böhmenkirch. Shipping available on request. Forklift available for loading.

Condition: used, Year of construction: 2001, saw blade diameter 400 mm miter . Kühlung weight of the machine ca. 1 t number 4 Stück +++++ Please note: Gsdpfxslug Tuj Aacjuh The machine is dismantled and ready for loading. It is not possible to show it under power or make a video. Our offer includes already the best pictures. So we don’t have and won’t send additional pictures. +++++

Condition: ready for operation (used), Machine is disconected from power. Gusdpfohva I Ijx Aacoh

Condition: good (used), Year of construction: 1997, Offer 25285 Gedpfx Aasw Imd Rjceuh Technical Data: - Metal circular saw with hydropneumatic feed - MPS control system with programmable work cycles - Workpiece clamping in pneumatic machine vice - Saw blade diameter up to 370 mm - Cutting speeds: 15 and 30 rpm - Mitre adjustable to the right up to 45°, to the left up to 45° – 60° - Cutting range at 90°: round 120 mm; rectangular 180 x 100 mm; square 120 x 110 mm - Mitre cut at 45°: round 120 mm; rectangular 130 x 100 mm - Maximum opening width of pneumatic machine vice: 160 mm - Drive: 400 V / 1.5 / 3 kW - Pneumatic connection: 6 – 8 bar - Micro-spray coolant system - Infeed roller conveyor: 2000 mm - Outfeed roller conveyor with length stop: 4000 mm - Space requirement: approx. W 800 x H 2050 x D 1100 mm - Machine weight: approx. 450 kg

Condition: excellent (used), KKS 450 Semi-automatic, hydraulic universal circular sawing machine with rotary table for miter cuts SAW BLADE Segment saw blade ☐ 400 x 4 ☒ 450 x4 mm Saw blade holder according to DIN 8576 50/4x14/80 mm WORKING RANGE Round material 90/45° 125 150 mm Square material 90° 115 140 mm 45° 110 130 mm Flat material 90° 305 x 40 330 x 40 mm 45° 235 x 30 250 x 40 mm U-profiles upright 90/45° 120 x 55 140 x 60 mm horizontal 90° 240 x 85 280 x 95 mm 45° 180 x 70 220 x 80 mm Section lengths from 10 mm DRIVE POWER Saw motor 1.8/2.7 kW Hydraulics 1.5 kW Coolant pump 0.1 KW CUTTING SPEED Guodpfoub Dc Isx Aacoh SPEEDS (standard) 11.5/23 13/26 m/min or 10/20 11/22 m/min or 13/26 15/30 m/min SAW BLADE FEED according to table infinitely variable 0 - 1,000 mm/min Rapid return saw blade 3,300 mm/min ELECTRICAL CONNECTION TN-S system - 3 phases, neutral conductor, earth 400/50 V/Hz WEIGHT Machine without accessories approx. 1,050 kg

Condition: refurbished (used), Year of construction: 1988, For sale is a Kaltenbach cold circular saw. The machine has been completely dismantled and rebuilt. In the course of the overhaul, the gearbox, motor and hydraulics were overhauled. The table has been turned flat and re-stored. Gearbox free of play! Type: KKS 400 E Saw blade Ø: 400 mm Motor power: 1.8/2.7 kW Cutting speed: 10/20 13/26 15/30 m/min Feed rate: 0 - 1,000 mm/min Fast forward/reverse: 1,550 mm/min Max. working range: 130 mm Working range square material: 120 mm Working range flat material: 305 x 20 mm Working range round material: 130 mm Working range min.: 10 x 10 mm Mitre range: 0° - 90° - 0° Dimensions LxWxH: 1,080 x 900 x 1,760 mm Guedpexb Aqxjfx Aaceh Weight: 900 kg Inspection / collection in 89558 Boehmenkirch Shipping possible on request Forklift available for loading.

Condition: good (used), Year of construction: 2004, Offer 24455 Technical data: - Saw feed via hand lever - Saw blade diameter 315 mm - largest opening width vice approx. 160 mm - Cutting range approx. at 90° approx. 100 mm - flat up to 135 x 80 mm - Cutting range Li + RE at 45° approx. 108 mm - flat up to 100 x 80 mm - Cutting range Li at 60° approx. 80 mm - flat up to 70 x 80 mm - Cutting speeds approx. 33 + 66 rpm Gsdpjuv Eygsfx Aacsuh - Drive 400 V / 1.3 / 1.8 kW - Coolant device - Space requirement approx. W 950 x H 1600 x D 950 mm - Weight approx. 270 kg

Condition: refurbished (used), Year of construction: 1980, For sale is a Kaltenbach cold circular saw The machine has been technically and optically refurbished Gearbox naturally free of play! Type: KKS 400 H Saw blade Ø: 400 mm Motor power: 1.8/2.7 kW Cutting speed: 10/20 13/26 15/30 m/min Feed rate: 0 - 1,000 mm/min Fast forward/reverse: 1,550 mm/min Guedexb Aqfepfx Aaceh Max. working range: 130 mm Working range square material: 120 mm Working range flat material: 305 x 20 mm Working range round material: 130 mm Working range min.: 10 x 10 mm Mitre range: 0° - 90° - 0° Dimensions LxWxH: 1,080 x 900 x 1,760 mm Weight: 850 kg Inspection / collection in 89558 Boehmenkirch Shipping possible on request Forklift available for loading.

Condition: good (used), Year of construction: 2011, machine/vehicle number: 691-PW3R-05519, Offer 24573 Technical specifications: - Cutting wheel diameter up to 356 mm - Cutting capacity up to 120 mm - Motorized cutting infeed - Manual cross infeed 120 mm - Table dimensions 410 x 310 mm - Table travel 220 mm Gujdpfsv Saqbox Aacoh - Drive 400 V / 5.5 kW - Coolant system - Space requirement approx. W 1500 x H 1800 x D 1050 mm - Weight approx. 850 kg

Year of construction: 1986, condition: good (used), machine/vehicle number: 106157, Offer 21035 Technical data: - Saw blade diameter up to 400 mm - Cutting range with saw blade diameter 400 mm - at 90° round 130 mm - square 120 mm - flat up to 260 x 60 mm - mitre adjustment left + right 0 - 90 ° - cutting speed 1750 / 3500 m/min - feed speed of the saw blade 0 - 3 m/min - rapid return 3000 mm/min Gsdpsg A Rgfsfx Aacsuh - Saw drive 400 V / 3,7 / 4,4 kW - 2 pieces pneum. Material clamping vices with adjustable clamping pressure - space requirement approx. W 1200 x H 1900 x D 1200 mm - weight approx. 600 kg