Condition: new, saw blade diameter 420 x Ø 40 mm cutting diameter 170 mm cutting length 410 mm dimensions of saw-blade 420x3,2/2,4x40 mm turning speeds 3500 U/min Dust suction hood 100 mm total power requirement 3,0 kW weight of the machine ca. 120 kg dimensions of the machine ca. 1300 x 800 x 1600 mm - Cross-cut and miter saws for cross-cut cuts - Miter adjustment on both sides (60 ° / 45 °), with fixed stop - Shifter cut on both sides 45 °, with fixed stop - Stable cast iron construction - Precise linear bushing guide on the tool slide hardened and ground steel shafts - manual saw feed Godjxabztjpfx Aciskb - Saw blade infinitely adjustable in height - nozzle for opt. Suction Cutting data: - Cutting length at 90 ° = 410 mm - Cutting height at 90 ° = 170 mm - Cutting length at 45 ° = 290 mm - Cutting height at 45 ° = 115 mm Special accessories included: - Adjustment of shifter cut via hand crank, both. adjustable (45 ° / 45 °) - HM circular saw blade 420x3.2 / 2.6x40 mm Z = 108 FTZ neg. For aluminum and plastic - hydraulic feed brake, infinitely adjustable - pneumatic material clamping from above consisting of: 2 vertical clamping cylinders, adjustable, with hand lever valve - machine stand

Condition: ready for operation (used), Year of construction: 2018, cutting diameter 300 mm saw band length 3660 x 27 x 0.9 mm capacity 90 degrees: flat 320 x 290 mm Godpfxey Uy S Ao Aciekb capacity 45 degrees: round 290 mm capacity 45 degrees: flat 260 x 280 mm capacity 60 degrees: round 200 mm capacity 60 degrees: flat 180 x 170 mm coolant capacity ca. 100 l Control SPS total power requirement 2.4 kW AC weight 904 kg range L-W-H 2410 x 1920 x 2020 mm in good conditions Original price approx. 22.000 euros Special price on request Features: - Robust electro-hydraulic miter band saw, fully automatic (INDUSTRIAL) * Fully automatic with automatic material feed * Material feed unit with recirculating ball screws - Includes PLC MITSUBISHI control unit * 20 programs, each with 15 cutting lengths + number of pieces programmable - For angles from 0° to 60°, with ball-bearing rotary table * Mitre cuts up to 45° possible in automatic mode * Mitre cuts up to 60° possible in semi-automatic mode * Manual mitre adjustment * Stepless adjustment of the mitre angle - Saw blade guides made of carbide plates - Saw feed continuously adjustable via fine throttle - Strong machine bed and torsion-free saw frame - Stepless speed adjustment of the saw blade - Coolant device - Operating instructions for machine + control system * Special accessories included: - 1x PEGAS chip conveyor

Condition: ready for operation (used), Year of construction: 2007, cutting diameter 320 mm saw band length 3400 x 27 x 0.9 mm capacity 90 degrees: flat 320 x 400 mm capacity 45 degrees: flat LI 320 x 280 mm capacity 45 degrees: flat RE 320 x 260 mm capacity 60 degrees: flat RE 320 x 140 mm band speed 35 + 70 m/min work height max. 930 mm voltage 400 V total power requirement 2.67 kW weight 950 + 250 kg well-maintained condition (!!) current new price incl. accessories ~ 40.000 Euro special price on request - in checked conditions - machinevideo - ?v=AHgMDxAcpgE Equipment: - electro-hydraulic vertical mitre bandsaw - with large cutting range and small footprint - Robust material support table - miter cuts are carried out fully automatically * electro-hydraulic miter adjustment left right - Up to 99 cutting programs - Central operation of all machine functions from the front - Loading also possible from above Gkjdpfx Aoym D Drsciob - Precise positioning thanks to accurate measuring system - electro-hydraulic miter adjustment left right - Electro-hydraulic material clamping - electro-hydraulic infeed from the saw arm * steplessly adjustable (cutting pressure control) - Operating instructions (PDF) * Special accessories included : - BAUER material feed unit - Micro-dosing device (spray oiler)

Condition: new, saw blade diameter 520 x Ø 50 mm cutting diameter 200 mm cutting length 420 mm Cutting height at 45° 140 mm dimensions of saw-blade 520x3,6/3,0x50 mm turning speeds 2800 U/min Dust suction hood 100 mm total power requirement 3,0 kW weight of the machine ca. 310 kg. range L-W-H 1400 x 900 x 1650 mm - Crosscut and miter saws for crosscuts - Miter adjustment on both sides (60°/45°), with fixed stops - Shift cut on both sides (60°/45°), with fixed stops - Stable cast iron construction - Precise ball bearing guidance of the tool slide hardened and welded steel shafts - manual saw feed - Saw blade infinitely adjustable in height - socket for opt. suction Furnishing : - 3.0 kW motor for ALU cuttings - Saw blade can be tilted via handwheel and worm gear (shift cut) - Saw blade diameter 520 mm - Saw blade mounting hole 50 mm - Saw blade speed 2,800 rpm - 400 Volt / 3 kW (S6/40%) motor with brake and automatic. Star-delta motor circuit - Machine weight approx. 250 kg Cutting data : - Cutting length at 90° = 420 mm - Cutting height at 90° = 200 mm - Cutting length at 45° = 295 mm - Cutting height at 45° = 140 mm Special accessories included: - HM saw blade 520x3.6/3.0x50 mm - Hydraulic feed brake, continuously adjustable - Pneumatic material clamping from above best. from : 2 vertical clamping cylinders adjustable with lever valve - pneumaschine saw blade spray device - Machine can be tilted from the front on both sides using a hand crank - Machine stand Gkjdpfexaaxdex Acieb

Condition: new, saw blade diameter 350 x 32 mm capacity degrees: round 1 mm capacity degrees: square 95 x 95 mm capacity degrees: flat 180 x 95 mm Gkedpsxaab Sjfx Aciob capacity degrees: round 110 mm capacity degrees: square 95 x 95 mm capacity degrees: flat 125 x 95 mm capacity 60 degrees: round .0 mm capacity 60 degrees: square x mm capacity 60 degrees: flat x mm

Condition: new, roll diameter 520 mm throat 520 mm workpiece height 310 mm cutting speed 25 - 500 m/min table surface area 600 x 500 mm band length 3.880 x 3-16 mm mm Table tiltable up to 15° Grad work height max. 1000 mm total power requirement 1,5 kW weight of the machine ca. 500 kg. dimensions of the machine ca. 1,3 x 0,76 x 2,14 m Furnishing: - Solid gray cast iron table - Safe working is guaranteed by the large contact surface - Standard with band welding device, annealing device - Scissors and sharpening stone - As standard with continuously adjustable cutting speed - Machine body made of robust steel construction for smooth running - Precision blade guide for optimal cutting results - Ideal for sawing complicated contours and shapes - Work table can be swiveled by 15 ° in all 4 directions - Blow-out device with compressor included in delivery - For radius sawing saw bands from 3 mm wide available scope of delivery: Gksdpfx Asxaazxscisb - saw band - Tape welding device with annealing device - halogen light - Scissors - grindstone - Chip brush - blow-out device - LED digital display - Longitudinal table groove

Condition: used, Year of construction: 1996, saw blade diameter 300 mm cutting diameter 100 mm capacity 45 degrees: flat 105 x 80 mm capacity 45 degrees: round 100 mm capacity 60 degrees: flat 80 x 70 mm capacity 60 degrees: round 90,0 mm dimensions of saw-blade 300 x 2,5 x 40 mm hole of sawblade 40,0 mm stroke 150 mm cutting speed 17 + 33 U/min Gkedpfxjzl E Two Aciob voltage 400 V weight 340 kg range L-W-H 1000 x 800 x 1600 mm Features: - Machine cabinet with built-in coolant system - Vertical saw head guide - 2 speeds - Very large work surface and turntable - Mitre adjustment on both sides: 60° to the left / 45° to the right - Clamping vise with lateral quick-adjustment and double clamping arm - Precise prism guide for the gear head - Operatorâ??s manual

Condition: good (used), Year of construction: 2002, cutting diameter 325 mm capacity 90 degrees: flat 500 x 300 mm capacity 90 degrees: square 325 x 325 mm cutting speed 35 / 70 m/min capacity 45 degrees: round 300 mm capacity 45 degrees: square 300 x 300 mm capacity 60 degrees: round 200 mm capacity 60 degrees: flat 200 x 200 mm capacity 60 degrees: square 200 x 200 mm saw band length 4200 x 27 x 0.9 mm work height max. 750 mm total power requirement 2,2 kW weight of the machine ca. 1.300 kg. range L-W-H 2230 x 2100 x 1280 mm Original price approx. 35.000 - 40.000 euros Special price upon request Machine from a workshop for people with disabilities Features: - Robust electro-hydraulic band saw - FULLY AUTOMATIC * With manual miter adjustment - Continuously variable hydraulic adjustment of clamping pressure - Control switch for manual functions - Single/multiple stroke selectable - Single cuts possible - 2x hydraulic vertical clamps (bundle clamping device) - Control panel on the front of the machine - Operating instructions (PDF) Additional technical data: - Single stroke: 0 - 600 mm - Multiple stroke: 0 - 6.000 mm Gkjdpfezqgf Eex Acisb - Lowering speed: 0 - 300 mm/min. (continuously variable) - Max. material weight: 250 kg/m.

Condition: good (used), Year of construction: 2014, cutting range 300 mm capacity 90 degrees: flat 330 x 260 mm capacity 90 degrees: square 260 x 260 mm capacity 45 degrees: round 260 mm capacity 45 degrees: flat 270 x 200 mm capacity 45 degrees: square 250 mm capacity 60 degrees: round 180 mm capacity 60 degrees: flat 170 x 170 mm capacity 60 degrees: square 180 mm automatic feeds 9999,9 mm feed minimum 2.0 mm cutting diameter minimum 5.0 mm band speed 15 - 100 m/min vice 340 mm Öffnung dimensions of saw-band 3650 x 27 x 0,9 mm Control MEP CNC total power requirement 2.2 kW weight 1240 kg range L-W-H 1800 x 1900 x 1750 mm actual NEW price about 23.000 Euro special price on request Equipment: - robust electro-hydraulic fully automatic band saw (INDUSTRY) Gkodpfx Ajzkbn Uecisb - with additional semi-automatic function, for cuts from 0° to 60° left - WINDOWS “CE” based MEP 50 – control and 7” touch screen display * simple and quick setting of all machine parameters * with additional soft keys + backlit display * 10 programs, each with a maximum of 9999 pieces and . a maximum length of 9999.9 mm - material feed with stepper motor via ball screw * single stroke 600 mm repeatable to saw any length * accuracy of ± 0.1/600 mm - feeder with protective cover and safety limit switch - precise setting of the cutting feed with indication in mm/min - positioning of the saw head and movement of the feeder using a joystick - automatic detection of the start of the cut - large deflection discs, adjustable from cast steel - Saw blade tension with blade tension control and display - Hard metal blade guides for maximum cutting precision - Automatic monitoring of the cutting load - Vice with quick adjustment * with interchangeable clamping and stop jaws - Large, laterally extendable chip tray and coolant container * equipped with 2 electric pumps for lubricating and cooling the saw blade * Coolant gun for cleaning the machine - Chip removal brush for cleaning the saw blade - Operating instructions DE Information from the manufacturer: When installing this saw in a network with a residual current device (FI), this should be universally current sensitive and not less than 300 mA.

Condition: ready for operation (used), Year of construction: 2014, saw blade diameter 350 x Ø 32.0 mm capacity degrees: flat 175 x 75 mm capacity degrees: square 110 x 110 mm capacity degrees: flat 100 x 80 mm capacity degrees: square 85 x 85 mm turning speeds 3000 U/min total power requirement 1.5 kW weight of the machine ca. 180 kg Gkedpjyu U Dfsfx Acieb dimensions of the machine ca. 870 x 710 x 1435 mm Equipment : - semi-automatic circular saw for cutting PVC and aluminum profiles - two-hand safety operation - Miter adjustment : * left * right 0 / / - Large protective hood, covers entire working area - Saw blade - 2x vertical pneumatic clamping cylinders - Adjustable blade and cutting feed - Air dust gun Work sequence 1) Setting the cutting angle 2) Inserting the material 3) Adjusting the stroke speed 4) Bring the clamping cylinder up to 20 mm of material 5) Clamp the material 6) The machine is ready for operation by pressing the start button. 7) Press and hold the two SAW buttons, the material is sawn. 8) At the end of the cycle, release both SAW buttons and press the STOP button 9) Open the vice and remove or push the material forward * Special accessories included : - ALU chip extractor

Condition: used, Year of construction: 2016, total height: 1,800 mm, total length: 3,000 mm, total width: 1,300 mm, Colour: Black Empty weight: 1.585 kg Price: On request - Year: 2016 - Documentation available: Yes Godpfxjzx Unko Aciokb - CE marking present: Yes - CE certificate present: No - Serial number: 1603012 - Drive system: Conventional - Saw type: Semi-automatic - Horizontal/vertical: Horizontal - Mitre cutting available: Yes - └ Round cutting capacity at 90° [mm]: 360 - └ Round cutting capacity at 45° [mm]: 360 - Round cutting capacity [mm]: 360 - Power [kW]: 3.7 - Saw blade length [mm]: 5200 - Saw blade width [mm]: 34 - Saw blade thickness [mm]: 1.1 - Workpiece clamping: Hydraulic - Options: Digital readout, Chip collection tray - Transport dimensions: 3000mm x 1300mm x 1800mm (l x w x h) - Transport weight [kg]: 1585kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: good (used), Metal band saw, band saw machine, band saw, vertical band saw, horizontal band saw, hydraulic horizontal band saw machine -Manufacturer: Ferm 7, Metal band saw -Type: BZ-175 -Drive: 0.75 kW -Cutting capacity 90°: Round 180mm, Rectangle 260x180mm Gkjdpfxezzmh Is Aciob -Cutting capacity 45°: Round 115mm, Rectangle 115x180mm -Saw band speed: 70/110/150/195 m/min -Saw blade: 2360 mm -Transport dimensions: 460/1230/H990 mm -Weight: 140 kg

Condition: excellent (used), Karmetal OSA 300 x 370 PLC Controlled Fully Automatic Bandsaw Balde Speeds Variable 25 – 90m/min (Invereter) Round Section 300mm Rectangle Section 280 x 370mm Sqaure Section 280mm For sale with *Jet Machinery Ltd* Jet Machinery Stock No: #270341 Machine Serial Number: 21482 Cost: £14,950.00 + VAT Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use. Gjdpfxezuxugs Aciekb

Condition: like new (used), Year of construction: 2023, functionality: fully functional, total length: 17,400 mm, total width: 1,970 mm, total height: 1,870 mm, cutting range round steel at 90°: 200 mm, type of input current: three-phase, overall weight: 2,300 kg, input voltage: 380 V, cutting range square steel at 90°: 200 mm, length stop: 8,000 mm, Equipment: documentation/manual, We are offering this like-new Jih-I Machinery JIH-NC24L circular saw for non-ferrous metals and aluminum, manufactured in 2023. Model: JIH-NC24L Serial number: N24L022C056 Date of manufacture: 20220826 Voltage: 380 V Gedpjzzp Epofx Aciokb Frequency: 50 Hz Number of phases: 3 Power: 15 HP 8-meter infeed table 6-meter outfeed table If you have any questions or would like more information, please feel free to send us a message.

Condition: used, Year of construction: 2001, Fully automatic bandsaw Müller HBA 260 CNC (Dais + Partner) with minimal feed system and roller conveyor. Gksdpfx Aoz Afgfscieb

Condition: good (used), functionality: fully functional, Segura 117 metal bandsaw - Tiltable table - Equipped with Ideal bandsaw blade welding device - Very heavy-duty design Gkodoygmztspfx Aciob - Speed regulation Due to the age of the used machine, warranty is excluded when sold to commercial customers.

Condition: used, Manual Bandsaw with Miter up to 45° Cutting range round up to 200 mm, square up to 190 mm 2 speed ranges Gksdpfx Ajzzkhrecieb Coolant pump Machine weight approx. 300 kg Machine dimensions: length 1200 mm, width 900 mm, height 1800 mm

Condition: excellent (used), Year of construction: 2011, functionality: fully functional, power: 9.5 kW (12.92 HP), cutting height (max.): 260 mm, cutting width (max.): 260 mm, total height: 2,130 mm, total length: 1,670 mm, total width: 2,080 mm, overall weight: 2,200 kg, table height: 950 mm, Equipment: documentation/manual, lighting, A fully hydraulic production band saw machine, with a vertically running saw band, for 90° cutting of profiles, thin-walled and solid materials in all grades, including hard-to-machine materials such as Titanium, Hastelloy and Inconel. The standard Kasto Basic Control system provides optimal machine operation. Up to 99 programs can be programmed (length/quantity combinations). After the specified number is reached, the machine automatically shuts down. Precise material length positioning of the material feed unit via a ball screw. Frequency-controlled drive 5.5 kW, 0-start, protection in case of band saw breakage and clamping force control are part of the standard equipment and guarantee perfect operation for both single cuts and small to medium-sized series. Gsdpfozz Ih Nsx Aciokb The KASTO Universal Hydraulics ensures the best cutting results and a long service life of the band saw. Suitable for use with bi-metal and carbide band saws. Cutting capacity, round [mm] 260 Cutting capacity, square [mm] 260 Cutting capacity, bundle width [mm] 150-260 Cutting capacity, bundle height [mm] 0-200 Smallest cutting dimension [mm] Ø 10 Smallest cutting short length [mm] 5 Clamping range [mm] 0-260 Length [mm] 1,670 Width [mm] 2,080 Height [mm] 2,130 Bed height [mm] 950 Weight [kg] 2,200 Total drive power [kW] 9.5 Power of saw motor [kW] 5.5 Automatic material feed length, single [mm] 600 Maximum material feed length [mm] 9,999 Minimum remaining piece length during manual operation [mm] 10 Minimum remaining piece length in automatic operation [mm] 110 Cutting speeds (infinitely adjustable) [m/min] 15  125 Cutting feed infinitely adjustable Material clamping hydraulic, infinitely adjustable Saw band guidance by carbide, replaceable Clamping force: Horizontal main clamping clamp (Sp I) [N] 1,100  6,800 Horizontal material feed clamping clamp (Sp II) [N] 1,100  6,800 Saw band dimensions [mm] 4115 x 41 x 1.3

Condition: used, Double-miter saw RAPID, type DGL 5000 / 500 Requires repair – control system is not functioning Year of manufacture: 1993 Cutting length: 5000 mm Shortest section length: 350 mm Saw blade diameter: 500 mm - Control system is not functioning - Exposed metal parts partially show surface rust Space required (L x W x H): 7200 x 1700 x 1850 mm Weight: 1250 kg Gkjdpfsyxy S Djx Acisb We are clearing space Affordable machine – ideal for export

Condition: used, Automatic Hacksaw SILISTRA / BULMAK Type OH 254 Hacksaw with material feed Machine No. 862919 Year of manufacture: 1986 Cutting capacity - Round Ø 250 mm Cutting capacity - Square 250 x 250 mm Stroke rates 40 - 50 - 63 - 80 - 100 - 125 strokes/min. Saw blade length 450 mm Motor power 1.5 and 2.2 kW, pole-switchable Electrical connection 380 Volt, 50 Hz - Straight cutting automatic machine designed exclusively for 90° cuts - Saw motor with 2 speeds and 3 V-belt stages Gkjdpewb Hxvefx Acisb - Saw bow with hydraulic lowering and lifting - Hydraulic cutting pressure adjustment via throttle valve - Length stop via manually adjustable fixed stop (electrical contact stop) approx. 800 mm - Vise feed with electric feed drive using leadscrew for automatic material transport - Hydraulic material clamping with stepless clamping force adjustment - Coolant unit integrated in machine base - Electrical control cabinet positioned next to the machine Required floor space (L x W x H): 2000 x 1800 x 1400 mm Weight approx. 900 kg

Condition: good (used), Roller diameter: 300 mm Overhang: 450–500 mm Max. workpiece height: 220 mm Table size: 600 × 600 mm Table swiveling: yes, partially in 2 directions Saw band length: 3350 mm Saw band width: approx. 10 mm Band speed: 15 – 125 m/min or 125 – 1000 m/min Partially continuously adjustable Gkjdjzynxxspfx Aciob Weight: approx. 700 kg Dimensions: 1000 × 700 × 1800 mm Equipment: -integrated band welding device (IDEAL BS00) -grinding wheel for deburring the weld seam -continuously variable speed control

Year of construction: 2014, condition: ready for operation (used), overall weight: 4,000 kg, total width: 1,300 mm, total height: 2,200 mm, product length (max.): 2,540 mm, Metal Band Saw manufactured in 2014. This JAESPA Classic 423 DGH features a heavy steel construction and a low-vibration grey cast iron saw band table. It includes an NC control system with a 9-inch colour touchscreen for cutting program management and automatic positioning for mitre cuts. If you are looking to get high-quality cutting capabilities, consider the JAESPA Classic 423 DGH machine we have for sale. Contact us for further details. Gjdpfx Acjzzavxjiokb - Saw Frame Construction: Heavy steel construction, double-mounted close to the saw band, precisely guided by a hydraulic feed cylinder- Saw Band Table: Low-vibration grey cast iron with a machined surface and T-slots- Control System: NC control with 9-inch colour touchscreen for preselection and control of cutting programs (cutting lengths, piece counts, band speed, and angular position)- Mitre Cuts: Automatic positioning of the saw frame for mitre cuts on both sides between 30° and 90°- Upper Saw Band Guide: Automatically self-adjusts to the required workpiece height- Operating Modes: "HAND" for single cuts and "AUTO" for fully automatic series production cuts- Material Transport: Motorised feed (pliers vice / Zangenspannstock)- Material Clamping: Hydraulic clamping via short-stroke cylinders on both sides of the saw band- Saw Band Drive: Infinitely variable control via a frequency-regulated electric motor- Band Tensioning: Regulated mechanically via disc springs and monitored via manometer- Saw Band Length: 4570 mm- Net Weight: Approx. 4000 kg (incl. 3000 mm roller conveyor)- Dimensions (Required Footprint): 1300 mm x 2540 mm (without roller conveyor)- Height: 2200 mm- Additional Equipment: Electrically powered chip brush, generous coolant tank with integrated chip collection container, 3000 mm roller conveyor

Condition: used, Year of construction: 2001, Technical details: saw blade diameter: 250/285 mm cutting diameter: 50-70 mm total power requirement: 5,5 kW weight of the machine ca.: 1 t Saw type: circular saws Gsdswvbk Ajpfx Aciekb Cutting direction: straight cut Automation: automatic Material type: structural steels, stainless steels, tool steels Material width: 60 mm Material height: 70 mm *

Condition: used, Year of construction: 1999, Max. saw blade diameter: 450 mm Continuously adjustable saw blade feed Godpfx Aozx Uwrjciekb 2 engine speeds Hydraulic material clamp, vertical and horizontal The sawing table can be rotated in both directions via hydraulic motor Coolant pump Positioning unit up to 6400 mm with program input or individual cut Roller conveyor left Light barrier operation manual Only 106 cutting hours

Condition: good (used), saw blade diameter: 350 mm, – Saw blade, 350 mm – Double miter cut – Hydrocheck system – Protective cover – Mist lubrication system – 400 V Gksdounh H Espfx Acieb