Condition: like new (used), Year of construction: 2023, functionality: fully functional, Centering with 2 x 3 rollers, diameter 200 x 300 mm Drive 2 x 3 kW Centering with synchronous linkage and servo cylinder Iedpfxsx Eig Uo Aaljap The centering can optionally be equipped with an extraction device for easy tool change

Condition: refurbished (used), Year of construction: 1990, functionality: unexamined, Pattern turning device with height adjustment and electric feed motors. Height adjustment is electric. The price is for the machine as is. Optionally, we can also offer a complete overhaul. Ijdpfox E Dbcsx Aaloap

Condition: new, The AE-400 SERVO edger is designed for longitudinal trimming and slitting of side boards fed to the machine at high speeds (100-400m/minute). The machine works directly with conveyors feeding and receiving boards in automatic mode. The machine is equipped with a board scanner from above and below. The maximum instantaneous efficiency of the edger up to 55 boards/min can be obtained by cutting a 2.5 m board to the same width without changing the spacing of the saw blades. Each adjustment of the edger node devices to the width of the board causes a change in performance. The average productivity of the machine, depending on the work configuration, ranges from 35-48 boards/min. technical dance Iedpsnygvrefx Aalsap No. Parameter Value 1. Saw spindle drive motor power. 55 kW 2. The number of revolutions of the saw spindle. 3550 rpm 3. Diameters of used saws. 400mm 4. Maximum cutting height. 50mm 5. Number of saw blades used. 2 to 3 pcs. (2 floating saws) 6. Minimum board length. 2000mm 7. Maximum raw material length. 6200mm 8. Maximum number of boards after cutting 1 board: 2 pcs. 9. Feed: 100- 400m/min Cutting for 1 board - with two saws (2 floating saws): 1. Minimum saw spacing (board width after cutting) 75 mm 2. Maximum spacing of extreme saw blades (board width after cutting) 300 mm Cutting into 2 boards - with three saws (2 floating saws), 1. Spacing the saws on the fixed coupler (board width after cutting) 50-100mm 2. Spacing between floating saws (board width after cutting) 50-100mm 3. Cutting into 2 boards minimum 2 x 50mm 4. Cutting into 2 boards maximum 2 x 100mm Other machine configurations are possible on request. We also produce other sawmill lines: log sorting plants, board sorting plants, board stackers, conveyors.

Condition: refurbished (used), Year of construction: 2024, functionality: fully functional, The CAMBIO 66 log debarker is equipped with the latest generation AIR TEN rotor.Knife sytem CAMPRO TRIMAX. Iaodpehkh Hxjfx Aalop The debarker is sold after major repairs. The sales package includes the centering conveyor SODERHAMN.

Condition: new, Year of construction: 2019, functionality: fully functional, total length: 6,000 mm, total width: 1,800 mm, Industrial vacuum and pressure impregnation plant designed for efficient and uniform wood treatment. Iodpfx Aajx Sdptsloap The T10 features a Ø1,800 mm × 6,000 mm autoclave, handling 8–9 m³ of timber per charge, with operating pressure up to 15 bar (abs). The plant is fully automated via PLC, enabling precise control of vacuum, pressure, time and preservative absorption. Built to EN 13445 standards with third-party inspection, it is suitable for modern chrome- and arsenic-free preservatives. Complete system includes pressure vessel, working tank, vacuum and pressure pumps, cleaning system, trolley loading system and safety features. Ideal for sawmills and industrial wood processors seeking reliable, high-quality impregnation performance. Technical specifications available on request.

Condition: used, Costa multi-blade saw -Type Lince -max. cutting height 140mm Iajdpfjvw Rplex Aalop -motor 30kW

Condition: used, Year of construction: 1998, LBL Brenta Oxia -max. cutting height 150mm -max. passage width 1000mm -multi-blade saw with fixed saw attachment Iedpfovw Rnbjx Aaljap

Year of construction: 2025, operating hours: 2 h, condition: new, functionality: fully functional, Pelletizing plant for a wide range of materials such as wood, miscanthus, agricultural by-products and waste (hay, straw, corn stover, etc.), animal feed, and more. This is a complete compact system, built on a base frame, consisting of the following components: - Raw material storage hopper (4 m³) with agitator - Hammer mill, 22 kW drive power, for size reduction of raw materials (e.g., wood chips) - Inclined mixer for raw material, including level sensors and fully automatic moisture dosing - Dosing hopper for pelletizing aids (e.g., corn starch) - Dosing screw for optimal material feed to the press (speed-controlled) Iaedsxlif Repfx Aalop - Pellet press with 30 kW drive power, featuring a horizontal ring die, discharge chute, temperature monitoring, overload protection, and more - Conveyor belt for pellet discharge, drop height approx. 2.5 m - Drum screen for dedusting and cooling of pellets The entire plant is centrally operated via Siemens PLC with touch display! All parameters are continuously monitored, and the plant will automatically shut down in case of malfunction! The system is designed and prepared for operation with a second press! Price excl. VAT! !!!!! Attention!! We are continuously looking for sales and service partners (worldwide) !!!!!

Condition: new, Year of construction: 2025, type of input current: AC, power: 5.5 kW (7.48 HP), input voltage: 400 V, Pelleting plant for a wide variety of materials such as wood, miscanthus, agricultural by-products and waste products (hay, straw, maize straw ....) Animal feed ..... This is a complete system (compact system), which is built on a base frame and consists of the following components: Storage container for raw material 1.5 m³, incl. agitator Inclined mixer for raw material incl. level sensors and fully automatic moisture metering Dosing screw for optimum material feed to the press (speed-controlled) Press 5.5 kW, with horizontal round die, discharge chute with dust separation, temperature monitoring Conveyor belt for pellet removal, discharge height approx. 2.0 m The entire system is operated centrally using a Siemens PLC via touch display! In addition, all parameters are permanently monitored so that the system is shut down if a problem occurs! Price excl. VAT! Iaodpfjud Nx Hex Aaljp The price includes operator and service training (in A-4352 Klam)! Attention, some of the pictures do not correspond to the actual system ( are example pictures ) !!!!! Attention!!! we are constantly looking for sales and service partners (worldwide) !!!!!

Condition: refurbished (used), 1 set = 8 guides suitable for the ESTERER SS 71 or SS 56 gang saw, completely refurbished, i.e. all sliding surfaces re-milled to precise angles. 1 set of upper guide shoes, bore 110 mm Ø, height 250 mm 1 set of lower guide shoes for bearing 6210 for SS 56 Ijdpfx Aaow Eu Aksloap

Condition: reconditioned (used), WOERNER or BOSCH lubricating oil pumps with 8 to 14 pump elements and oscillating drive, oil delivery rate individually adjustable for each pump element Ijdpfx Aasxl Aauslsap

Condition: used, Year of construction: 1993, functionality: fully functional, machine/vehicle number: 5017, FOR SALE: COMPLETE OR PARTIAL WOOD HANDLING AND DEBARKING LINE Iajdpfsyup Apjx Aalep

Condition: good (used), Year of construction: 1994, total height: 700 mm, total width: 700 mm, VOLLGATTER OLYMPIA UNIVERSAL 571 Frame Saw Isdpsyr Axrofx Aaleap Olympia Universal 571 Frame width: 710 mm Clear passage height: 710 mm The VOLLGATTER OLYMPIA UNIVERSAL is a high-precision and energy-efficient sawmill machine, engineered for maximum stability, durability, and easy maintenance. Construction and Frame The saw frame is made of high-strength, forged steel and is completely machined on all sides. The massive steel welded structure of the side stand is stress-relief annealed to ensure absolute dimensional stability and minimize vibration. Energy-Efficient Frame Guidance The patented saw frame guiding system operates without continuous oil-film lubrication, which reduces energy consumption and simplifies maintenance. Roller and Feed Technology The feed rollers are split down the center and can be replaced quickly. Roller pressure can be precisely adjusted using manometers and pressure control valves. A robust synchronizing shaft (MULLER system) ensures uniform raising and lowering of the upper rollers. Drive and Safety The upper roller drive operates via slip clutches to provide overload protection. Guide rollers ensure optimal chain tension and sufficient wrap-around on the drive sprocket. Additional Features - Fully-machined steel flywheels with tapered mounting - Vibratory chute with special oscillating elements - Base plate made of steel with main shaft mounted in spherical roller bearings

Year of construction: 2012, condition: like new (used), EWD roller table with transverse haul-off length 6500mm Width over all 2000mm Iajdpfx Aaeglugyolep Roller shell length 1200mm

Condition: excellent (used), Exotic log band saw - Feeding cross conveyor with feeder - Brenta band saw carriage, type Bamat 1600 opening 1600 mm, 5 trestles, 3 log turners - circular cut-off saws, 2x 13 kW - Brenta band saw, type Irpad 1600 1600 x 240 mm, saw blade width 260 mm - take-off roller table - roller conveyor with cross haul-off Iodpfx Aaokzg Ihjlsap - cross conveyor - roller table

Condition: like new (used), Year of construction: 2008, Üstünkarli UDKP 160 Cutting height 160 mm Chain bed approx. 420 mm With spikes in the chain bed Isdsucnudepfx Aalsap Including slat bush and spacer rings Main engine 75kW

Condition: good (used), Year of construction: 1991, Braun Canali band resaw TB 1100 Unimaster Roller diameter 1100mm Iaodpfsucnt Hox Aalop With swivel table for diagonal cut disassembled from our warehouse in 23936 Grevesmühlen

Condition: excellent (used), CATALOG NUMBER 7846 TECHNICAL DATA - minimum width of central prism after cutting: 85 mm - minimum length of cut log: 1300 mm - maximum diameter of cut log: 350 mm - shaft diameter: 70 mm - circular saw blade diameter: 500 mm - maximum number of circular saw blades on upper and lower spindle: 4 pcs each - 2 feed speeds + forward/reverse + inverter control - drive motor power (lower spindle): 22.5 kW - drive motor power (upper spindle): 18.5 kW - feed drive motor power: 1.1 kW - track length: 4450 mm - extraction outlet diameter: 3 x 200 mm - 3 rows of detents Ijdpfxsylbm Ie Aaloap - dimensions (L/W/H): 6040x1500x1850 mm - weight approx. 1250 kg ADVANTAGES – Made in Poland, WALTER brand – Complete operating documentation (DTR) – Used machine, in very good condition Net price: PLN 36,900 Net price: EUR 8,790 Net price calculated at 4.2 PLN/EUR (In case of major exchange rate fluctuations, the price may change)

Condition: excellent (used), Catalogue No.: 7502 TECHNICAL DATA Feed Carriage DTBC-P — Wheelbase: 750 mm — Feedstock diameter: 100–800 mm — Total lateral travel: 160 mm — Log rotation (left/right): 360° — Travel speed (forward & reverse): stepless — Hydraulic pump motor power: 5.5 kW Auxiliary Carriage DTCB — Wheelbase: 750 mm — Lateral travel range: 160 mm — Log rotation (left/right): 360° — Lateral movement motor power: 1.1 kW — Feed carriage dimensions (L/W/H): 2850/1400/1500 mm — Auxiliary carriage dimensions (L/W/H): 950/650/750 mm — Total weight: 1450 kg Iaodpfsylbmbex Aalop ADVANTAGES – Manufactured in Poland – Robust construction – Includes hoses and chains – Used machine, in very good condition, fully refurbished (invoice available for inspection) PRODUCT FEATURES The auxiliary carriage is designed to support logs or cants on the infeed side of the sawmill within a diameter range of 100 mm to 750 mm. The feed carriage is intended for feeding logs and cants into the sawmill within a diameter range of 100 mm to 750 mm. The machine facilitates log handling, including clamping the log, lateral movement, and rotating, all powered by hydraulic drives. Net price: 59,900 PLN Net price: 14,260 EUR (based on 4.2 EUR/PLN exchange rate) (Prices may vary depending on currency fluctuations) * MAR-MASZ guarantees the quality of your purchase, but is not an authorized representative of the manufacturer. All trademarks and brand names are used for informational purposes only, to enable identification of the goods. We only resell items that have already been placed on the market by the manufacturer. We have no business relationship with the manufacturer.

Condition: excellent (used), Complete planing line from intake to stacker with a Waco 3000 planer and surrounding equipment from System Hall Isdpfx Asm Uyknsaloap

Condition: excellent (used), CATALOG NUMBER 7881 Technical data: - Cutting height: 30-200mm - Max saw blade diameter: 350mm - Spindle diameter: 70mm - Max cutting width of wood: 500mm - Working width of arbor with saws: 400mm - Minimum length of cut wood: 1000mm *Top: - Anti-kickback devices - 4 toothed feed rollers – pneumatically pressed *Bottom: - Sliding roller - Anti-kickback devices Iaedpfxjyk Hhbo Aaljp - Toothed feed shaft, 2 pcs - Arbors with saws - Toothed feed shafts, 2 pcs - Infinitely adjustable feed speed via frequency inverter - Feed motor: 3kW - Main motors: 2x55kW - Extraction outlet diameter: 250mm - Machine dimensions (L/W/H): 2150x1880x1800mm - Machine weight: approx. 3500kg ADVANTAGES – Made in Poland – Double-arbor multi-blade saw, 2x55kW – Original DTR + CE documentation – Used multi-blade saw in very good condition Net price: 88,900 PLN Net price: 21,200 EUR (based on the rate of 4.2 EUR) (Prices may change with significant rate fluctuations)

Condition: ready for operation (used), Log band-saw with two band saw units at same machine. Iodpfx Aasypakaeljap The unit is delivered complete with electrical and hydraulic parts. Plus PLC for setting of measurement. Max log diameters 700 mm Sawing length 6.1 meter

Condition: used, functionality: fully functional, input voltage: 380 V, cutting height (max.): 600 mm, cutting width (max.): 550 mm, control type: manual, actuation type: electric, total height: 2,600 mm, total length: 18,000 mm, total width: 3,500 mm, overall weight: 4,184 kg, Equipment: documentation/manual, motor brake, For sale: JAROMA DRCC-110 vertical wide-band sawmill. This is a saw with a feed carriage, log manipulation system, longitudinal feeder, and log infeed device. Designed for longitudinal cutting of logs into boards and squared timber. Saw wheel diameter: 1100 mm. Cutting speed: 38 m/s. Carriage working speed: 1–40 m/min. Bandsaw width: 130 mm. Very well-suited for cutting curved logs. Includes a cross-feed conveyor for the log storage area. Iasdpfx Aeyqx Uysalsp

Condition: used, Year of construction: 2005, operating hours: 18,000 h, machine/vehicle number: RUW 1703, Year of manufacture: 2005 Machine number: 1703 Track, m: 2,75 Iaedpfx Ajmzawqjalop Crane type: ASX II Reach: 13,0 m Lifting capacity without grab: 1.250 kg / 13,0 m Grab: included Crane arrangement: center cabin side: left at crane column !! Sale by customer order !!!

Condition: excellent (used), Year of construction: 2020, functionality: fully functional, For sale: Wood-Mizer WB2000 Bandsaw (Year of manufacture: 2020) Offered for sale is a Wood-Mizer WB2000 from 2020, which has only been in operation since 2021. The machine has been regularly maintained, used very little, and is in excellent technical condition. Technical specifications: powerful 30 kW electric motor Log diameter up to approx. 1 m Iedpsyha Ipjfx Aaleap Cutting width up to about 90 cm Load capacity approx. 6 tons Suitable for 90–100 mm wide band saw blades Equipment (included): complete loading/infeed conveyor outfeed table with three-way material distribution (left / right / straight ahead) Camera system for cut monitoring PRO operator panel with touchscreen retrofitted quick-clamping system The machine can be inspected and tested on site; everything works perfectly.