Used sawing and cutting for sale (146)

Year of construction: 2017, condition: used, processing weak matter - length of cutouts from 1300 - 4500 mm - trunk diameter from 130 - 350 mm - 100 m3 / shift production - total input 230 kW Ibodponwm R Nsfx Akpeb

Year of construction: 2003, condition: good (used), Sorting line with 11 pockets Ibjdpfjxuh Sbjx Akpsb

Year of construction: 2004, condition: good (used), LBL Brenta Spaner CT 700 Max. cutting depth = 150 mm Max. cutting height = 650 mm Free central blade, overheating protection Clearance = 800 mm Fast, precise positioning via servomotor with electrical system. Ijdpfeyuc Nijx Akpjbb

Condition: used, Esterer DKV double edger Maximum pass-through height: 160 mm Maximum pass-through width: 800 mm Zero line on the right Left-hand machine (adjustable saw blade on the left) with 2 crosscut saws with roller infeed with lath head Ibjdpey Da Iijfx Akpjb with sliver separator with drive motor (45 kW) with control cabinet with saw blades Location: Germany, near Lake Chiemsee

Condition: used, Trimming saw Esterer DKE Passage width: 600 mm Passage height: 160 mm with 22 kW drive motor including spare saw blades including spare templates Location: Germany, near Chiemsee Isdpfx Aey Da Hfskpobb

Year of construction: 2006, condition: used, - cutting height (mm): 200 Iodpfx Asm E Uf Aekpsbb - Cutting width (mm:) 200

Condition: used, Frame saw Pini & Kay FN65 HH Passage width: 650 mm Drive motor: 33 kW with saw blades with suspension with intermediate shaft Iedpfx Ajxvz Hzokpjbb with splitter wedge Immediately available Location: Austria, near Graz

Condition: used, Year of construction: 1977, Wurster and Dietz GDZ 600 GES Year of construction 1977 Passage: 71 cm stroke: 600 mm with swing frame with water-cooled guides with hydraulic saw clamp Jansen with riving knife with saw blades with templates Ibjdpfx Akjqpdi Uepob with fence immediately available Location: Austria, near Klagenfurt

Year of construction: 2024, condition: new, Roller conveyor, width 7.5 m, length 8 m, hydraulic operation with electric motor. Iodpfozbxzhox Akpebb

Condition: good (used), Year of construction: 2002, functionality: fully functional, I sell a block machine for formatting scantlings into pallet blocks. Possible dimensions of blocks from 70 to 160. very good condition. Ijdpfovbcl Hex Akpebb

Condition: excellent (used), cutting height (max.): 120 mm, cutting width (max.): 700 mm, Right-hand machine, machine number 188 Electrically adjustable hydraulic width adjustment Infinitely variable feed rate from 0-80 m/min 37 kW drive motor with V-belt pulley, motor tensioning rail, Iedpfx Akov Raqxepjbb Various saw heads, shims, and saws Infeed table with individual trestles Fixed outfeed table The machine has been completely overhauled and is in excellent condition.

Condition: new, Year of construction: 2026, operating hours: 2 h, functionality: fully functional, Pelletizing plant for a wide range of materials such as wood, miscanthus, agricultural by-products and waste products (hay, straw, corn straw...) animal feed... This is a complete system (compact system) which is built on a base frame and consists of the following components: Storage container for raw material 4 m³, including agitator Inclined mixer for raw material including level sensors and fully automatic moisture dosing Dosing container for pressing aids (e.g. corn starch) Ijdsvlz H Rjpfx Akpebb Dosing screw for optimal material feeding of the press (speed-controlled) Press 15 kW, with horizontal round die, discharge chute, temperature monitoring, overfill protection..... Conveyor belt for pellet removal, discharge height approx. 2.5 m Drum sieve for dust removal and cooling of the pellets The entire system is operated centrally using a Siemens PLC via touch display! In addition, all parameters are permanently monitored so that the system is shut down if a problem occurs! The system is designed and prepared for the operation of a second press! Price excl. VAT! !!!!! Attention!! we are constantly looking for sales and service partners (worldwide) !!!!!

Condition: ready for operation (used), Wurster & Dietz round timber intake station with singulator and block chain conveyor with ejector. Ibodpfxsyxrtaj Akpsb

Condition: refurbished (used), functionality: fully functional, We currently have a HewSaw R250 available for delivery. The machine will be fully mechanically refurbished, including installation of new electric motors. It is an early-generation R250, but after refurbishment it offers excellent performance and reliability. The package also includes a Comact log infeed system, ensuring efficient log handling. The line can be customized according to your needs. Ibsdpfx Akjyu Scrspjb

Year of construction: 1994, condition: used, Edger line / automatic edger / double edger with measurement and automatic saw blade adjustment EWD Esterer Type: DK90 TL 1000 Year of manufacture: 1994 Maximum pass-through width: 1000 mm Maximum cutting height: 120 mm 3 blades in total 2 blades adjustable Measurement system: Combimes with S-conveyor with crosscut saw with Esterer ARS TR infeed with 2-lamella chip separator Ibedpfeyam Iaex Akpob Can be fully refurbished upon customer request. The plant has already been dismantled and is immediately available. Location: Austria, near Leoben

Condition: reconditioned (used), • 150 mm cutting height • 750 mm feed-through width • 350 mm wide slat bushing with used spacer rings and saw blades • Saw shaft fitted with new bearings Iodpew I Sg Dsfx Akpjbb • 55 kW saw motor • 1,170 mm working height • Infinitely adjustable feed • Roller lifting with hydraulic hand pump • Machine workshop-inspected • Machine newly painted

Condition: ready for operation (used), functionality: fully functional, Wurster & Dietz Trimming and Re-Cutting Machine Type FR7 with in-machine adjustment Ibedov I D Shjpfx Akpob Star-delta soft start Feed roller table Single-blade spiral roller chip separator Chips discharged into a trolley Main product on the feed roller table

Condition: refurbished (used), Complete Cutting Machine Group from LINCK: 1.Pre-cut feed table Linck EV20 (condition:good) Isdpjrvh Tmsfx Akpebb 2.Chipper canter LinckV18 (condition: good) 5.Boad separator unit Linck SE (condition: refurbished) 1. EV20- Pre-cut feed table Linck EV20 for smaller logs. Hydraulic unit is included. 2. Chipper canter LinckV18. 2x85 KW motor with direct drive. Completely refurbished set. We can also offer full electrical installation and assembly of line on site.

Year of construction: 2000, condition: excellent (used), functionality: fully functional, Double-shaft trimming saw, manufacturer Link, type CSMK 285 A1 B1, with spraying unit Saw head clamping length: 4 x 125 mm Ibodswww Iyjpfx Akpsb Weight: 17,500 kg Extraction device Av 21 CSMA 540 Extraction SE - separation conveyor Drive power: 4 x 132 kW Feed rate up to 150 m/min

Condition: refurbished (used), Trimming recutting machine MEM Cobra Ibedpfxeu Ni Iuo Akpeb Cutting height 120 mm Diameter 1070 mm 4 axes variable 2 x 55 KW Refurbished machine. Optionally we can offer new sprinkle separator as in photo.

Condition: good (used), Year of construction: 1980, functionality: fully functional, Automatic edger line Söderhamn (Kockums) Edger 511-A Built approximately 1975-1980, or 2000 With complete 6.2 m x 1.5 m infeed conveyor with automatic centering and motorized feed. Board width continuously adjustable. Feed speed 77-118 m/min Minimum edger width 75 mm Maximum edger width 350 mm Maximum wood thickness 125 mm Fixed saw blade Ibsdpfx Aeuq N Agskpsb 6 feed grooves Saw spindle speed 1800 rpm Maximum saw blade diameter 650 mm Weight with motor and control station 2050 kg

Year of construction: 1970, condition: good (used), functionality: fully functional, Stenner RESAW VHL 48 manufacture Stenner UK S/N J2103 year 1970 (original photos coming soon) Principal Dimensions and data: Diameter of saw pulleys: 48"= 1220mm Width of saw pulley face-standard 5" (127mm) Width of saw pulley face-optional 5 1/2" (140mm) Maximum width of saw - standard 5 1/2" (140mm ) Maximum width of saw-optional 6" (150mm)A Minimurn length of saw 25" 8" (782mm) Maximum height of top saw guide above table 28" (710mm) Table height from floor level 31 1/2" ( 800mm 9 Overall height from floor level 9.1" ( 2770mm) Overall width 8.1" (2460mm) Speed of saw pulleys,r.p.m. 8,000 (2440m/min) Horse power range 30 kW Size of fast and loose pulleys 20"x6 1/2" Feed speeds, standard; f.p.m. or m/min. 0-140 (0-42.6m) Shipping Specification : Standard Machine : Iodpevuhumofx Akpebb Net weight, lbs. 3583 kg The VHL 48 is a band resaw of advanced design embodying many new features resulting from a close study of user-operator requirements, and the necessity to provide fast and accurate sawing coupled with ease of operation, reduced operator fatigue, low maintenance, and increased safety. The design caters fully for these essential factors which contribute to a markedly high level of operating efficiency. The machine is primarily designed for the planning mill and joinery shops. The thin bandsaw gives the machine a high timber recovery rate; the loss due to saw kerf being very low. Compared with a circular radial-arm resaw, the VHL is faster, less wasteful, and uses less power for a given class of work general The VHL is made only as, a left-hand machine, i.e. the saw pulleys run in an anti-clockwise direction when looking in the direction of the feed. The drive is normally arranged to give a saw speed of 8,000 feet permin. (2440m l/min.) Main Drive The main drive is applied to the bottom saw pulley spindle which is prepared for vee belt, flat belt, or flat belt fast and loose pulleys to suit the proposed driving unit. Complete electric motor drives, up to 40 H. P. and for most current supplies can be provided; they include two vee pulleys, set of vee belts, belt guard, motor with slide rails, starter and a master stop button which is fitted to the machine base close to the sawyer's position. horizontal rollers The horizontal rollers are 6" (152mm) diameter and extend the full opening on the fence side and 6" (152mm) beyond the table on the open side; they are normally free-running idle rollers. They can be supplied hydraulically driven as optional equipment, either with the machine or after installation; the rollers are then driven in synchronism with the main feed rolls, by a separate motor. The drive is arranged so that the open-side roller at the outfeed end rotates in the reverse direction to facilitate the return of timber to the sawyer. The roller in front of the saw is moveable sideways to permit rapid saw changing.

Year of construction: 2007, condition: excellent (used), functionality: fully functional, REMONNAY edging and resawing machine, type DR8/225, manufactured in 2007. 7-position variable adjustment, 2 x 110 kW motors each. Pre-trimming saws for side boards. Cutting height 225 mm. S-type singulation with infeed roller table. Iodpfofcltgsx Akpebb Includes tilting and aligning table. Chip separator with two deflectors. Board cross conveyor. Roller conveyor with stripping device. Electrical control cabinet with control panel. Includes all accessories (circular saws, etc.).

Condition: good (used), min. width of the middle prism after cutting 55mm minimum length of the cut shaft 1270mm Ibjdpfxjwmg Sao Akpsb maximum diameter of the cut shaft 350mm shaft diameter 60mm diameter of the circular saw 500mm smooth regulation of the feed speed on the inverter power of the lower spindle drive motor 45kW power of the upper spindle drive motor 37kW power of the feed drive motor 1.50kW

Condition: reconditioned (used), functionality: fully functional, machine/vehicle number: 03013, BERCAR plank cutter, maximum cutting length 1100mm, maximum cutting height 170mm. Isdpfx Aksvvpb Rjpjbb 10 hp engine.