Condition: used, Year of construction: 2008, machine/vehicle number: 0-411-49-1873, Technical data: - Manufacturer: Bütfering - Type: Optimat SGO 211/RC - Number of grinding units: 2 - Year of manufacture: 2008 - Working width: 1.100 mm - Grinding belt width: 1.120 mm - Grinding belt length: 1.900 mm - Workpiece thickness: 3-160 mm - Feed speed: 2,5-13 m/min. - Table height adjustment Standard equipment: - Automatic workpiece thickness adjustment - Stepless feed speed via requency converter. - 125 grinding programs can be stored - Wear-free braking system 1. Grinding unit (R) - Calibration roller - Profiled steel contact roller - Diameter 160 mm - Drive motor: 15 kW 2nd grinding unit (C) - Combination unit with roller and grinding shoe - Rubberized contact roller 65 Shore - Contact roller diameter 160 mm - Electronic link pressure bar with segment width 35 mm. - Belt speed: 12 and 21 m/s - Tolerance compensation up to 1 mm - Suitable for veneered surfaces and solid wood. - Drive motor: 11 kW - Total connected load: approx. 28 kW - Operating voltage: 400 V / 50 Hz. - Compressed air consumption at 6 bar, 20 L/min. - Belt blow-off device per pressure surge 440 L/min. - Extraction volume: approx. 2,880 m3/h/ at 20 m/s - Extraction connection: Hedpjyh Hwuofx Ahnsfi Dedusting: 1 x Ø 160 mm (grinding unit, roller) 1 x Ø 160 mm (grinding unit, shoe) Dimensions: - Length: 1,700 mm - Width: 1,850 mm - Height: 2,100 mm - Location: not in stock - Available from April 2026

Year of construction: 2024, condition: used, The control of the dust extraction system is switched on and off via 2 sensors. Suitable for installation on an existing transport system Sword brush Micro-moistening of the brush elements by means of an antistatic moistening nozzle from Riepe. Moisturisation can be finely dosed via this nozzle. Cleaning the product surface using Sword Brush technology The dust particles are picked up by the brushes and removed by the suction system. A rotating squeegee and compressed air nozzles ensure constant cleaning of the brush systems. Power channel The power channel contains 14 rotating double power compressed air nozzles, which remove particles and dust from the material surface and from recesses. The suction system removes the loosened particles. Hfsdpfx Ahszf N Ncjnei Technical data: Power: 0.5 kW Self-cleaning system via the rotating brush Dust extraction: 2 x D120 mm at the top + 2 x D80 mm on the side. Motorised height adjustment Material of the panels to be cleaned: MDF, chipboard with melamine Workpiece length: min. 400 mm Panel width: max. 1,350 mm Workpiece height: max. 80 mm Feed speed: max. 35 m/min Removal standard: workpiece surface dust-free Important: Glue residues are not removed. Size of the machine: Width: 2,280 mm Installation length: 500mm

Condition: used, Technical data: - Manufacturer Leif & Lorenz - Working width max. 1,200 mm - Brush diameter *160 mm - Suction connection D100 mm - Year of manufacture 2005 - Motor power 0.37 kW - Location, in stock in Blomberg Hfodpfx Ahjzf N Eksnji - Also available for assembly with roller or belt conveyor

Condition: used, Year of construction: 1994, Max. passage height: 160 mm Sanding belt length, unit 1: 1900 mm Max. working width: 1350 mm Number of belts: 2 Belt, unit 1: Calibrating roller, grooved, rubber design Unit 1: Steel, grooved Sanding belt width, unit 1: 1350 mm Unit 2: Combination sanding unit Design, unit 2: Roller/shoe Control: Manual control panel, electric/pneumatic Belt oscillation: pneumatic Infeed height: fixed (top section moves) Table stroke: electro-mechanical Hsdpfx Ahey Naq Usnofi Table display: mechanical numerical display Working height or feed table height: 900 mm Location: Nattheim

Condition: used, Year of construction: 2000, Used machine Year of manufacture: 2000 Equipment and technical data: - Grinding unit can be swiveled using a hand crank - The machine stand made of welded steel guarantees high torsional rigidity and vibration-free operation - Oscillating grinding belt with separate gear motor for better grinding results - Oscillation can be switched on as desired - Grinding pad with graphite coating for a longer service life of the grinding belt - Height-adjustable grinding table to utilize the entire width of the grinding belt - Additional table for grinding radii with integrated extraction ports - The sprung belt tension automatically compensates for belt length differences - With adjustable stops, it is ideally suited for veneer grinding - Veneer overhang can be easily ground down - With chassis - Power of oscillation motor: 0.11 kW Hodpfxszk Nrue Ahnefi - Connection voltage: 400 V - Mains frequency: 50 Hz - Grinding belt length: 2,640 mm - Grinding belt width: 150 mm - Belt speed: 14 m/s - Oscillation stroke: 15 mm - Grinding area length: 800 mm - Grinding area width: 150 mm - Swivel angle of grinding unit: 0–45° - Work table length: 950 mm - Work table width: 450 mm - Work table height adjustment: 110 mm - Dimensions: 1,700 × 1,000 × 1,150 mm - Weight: 300 kg Availability: short-term Location: Flörsheim

Condition: used, Year of construction: 2008, total length: 2,060 mm, total width: 830 mm, total height: 1,180 mm, Colour: Grey Empty weight: 566 kg Hfedpfx Ahsywlfyjnoi - Year: 2008 - Documentation available: No - CE certificate present: No - Table length [mm]: 1000 - Table width [mm]: 400 - Sanding belt width [mm]: 200 - Sanding belt length [mm]: 3200 - Extraction nozzle diameter [mm]: 120 - Conveyor belt speed [m/s]: 13 - Min. tilting angle [°]: 0 - Max. tilting angle [°]: 45 - Transport dimensions: 2060mm x 830mm x 1180mm (l x w x h) - Transport weight [kg]: 566kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: new, Year of construction: 2024, New machine Year of manufacture: 2024 2-Belt Wide Belt Sander - Usable working width: 1100 mm - Abrasive belt dimensions: 1120 x 2150 mm - Max. workpiece thickness: 160 mm - Steel calibration roller, Art. 018: 150 mm - Sanding shoe width: 50 mm - Motor power: 14.7 kW - Belt speed: 18/16 m/s - Feed motor power: 0.55 kW - Adjustable feed conveyor with infinitely variable speed: 4–20 m/min Hfedpfxexz Iale Ahnji - Motorized height adjustment: 0.24 kW - Mechanical belt oscillation "ECO GEAR PATENT SYSTEM" - 1 pc. drum brake for belt deceleration - Swiveling roller for belt tensioning - 3 pcs. rubber-coated pressure rollers - Emergency stop bar at infeed - Electronic workpiece thickness display - 2 extraction ports, Ø 160 mm - Automatic table positioning Additional options: - Electronically segmented sanding pad with 20 segments - Increased belt motor power to 14.7 kW instead of 11 kW - Frequency-controlled feed speed - Electronic machine function control with 7" touchscreen BASE MACHINE ACCORDING TO CE STANDARD Art. 029 IMPORTANT: New patented belt oscillation system 1. No valves 2. No light barrier 3. Not sensitive to dust 4. Energy-saving and environmentally friendly system Availability: Short notice Location: Holm

Condition: used, Year of construction: 1984, Used machine Year of manufacture: 1984 Condition: fully inspected and serviced Equipment and technical data: - Incl. combined unit with contact roller and sanding shoe - with height-adjustable contact roller for calibration - with air cushion pressure shoe controlled by the workpiece - 4-way adjustable grit compensation - with pneumatic belt tensioning device - with a rotating texturing brush on the discharge side of the machine - Sanding width: 1350 mm - Sanding belt length: 1900 mm - Passage height: 150 mm - Main motor: 15 kW - Feed speed continuously adjustable 2.5 - 12.5 m/min. - with roller table at the infeed - with separate additional texturing brush - with roller table at the outfeed Hfedpfx Aozlbpnjhnsi - with digital display for the electrically driven workpiece thickness adjustment - with automatic workpiece thickness adjustment - Dust extraction port 2 x 200 mm - Feed belt is in good condition

Condition: excellent (used), Year of construction: 1987, functionality: fully functional, Industrial cross-sanding machine for high-quality surface finishing of wood, veneer, and painted workpieces. The combination of a cross-sanding and longitudinal-sanding unit enables efficient and precise processing in a continuous flow. Processing units: 1 × Cross-sanding unit with pressure pad belt 1 × Longitudinal-sanding unit 1 × Brushing unit Technical data Technical data: Sanding width: 1,300 mm Maximum workpiece thickness: 140 mm Working height: 780–920 mm Feed rate: 4.5–22 m/min Hedpfxozinvis Ahnjfi Cross-sanding belt: 4,900 × 150 mm Pressure pad belt: 4,650 × 140 mm Longitudinal-sanding belt: 2,620 × 1,350 mm Brush roller: Ø 150 mm Workpiece vacuum clamping system: 7.5 kW Total connected load: 44 kW Machine weight: approx. 3,850 kg

Condition: used, functionality: fully functional, 0.75 kW Hfsdsigaf Repfx Ahnji Spray system Flap disc 150/70/25 mm, sisal/leather/synthetic fabric Flap disc 150/70/25 mm, sisal/synthetic Flanges 70 mm reduced to 11 mm (2 pcs), metal Control panel on top 4 motors at 0.18 kW each for the brushes

Condition: reconditioned (used), machine/vehicle number: 9958, functionality: fully functional, Power connection: 380V, 7.3 kW Dust extraction: 1x 120 mm, 1x 180 mm Sanding table dimensions: 2850 x 1550 mm Hfjdpeiau Tljfx Ahnsi Sanding belt dimensions: 7820 x 150 mm Table height adjustment via handwheel Length x Width x Height: 4400 x 1700 x 1450 mm Weight: approx. 1100 kg

Condition: reconditioned (used), Year of construction: 1982, functionality: fully functional, overall weight: 950 kg, Sanding belt length 2200 mm, sanding belt width 400 mm, table length 1200 mm, usable height 120 mm, sanding width 390 mm, sanding belt speed approx. 21 m/sec, feed speeds 6 - 11 - 16 m/min, main drive motor 7.5 kW, feed motor 0.26 - 0.55 - 1 kW, pneumatic belt oscillation and belt air-blast, frame support, chassis. Hsdpfx Ajxq Ehxshnsfi

Condition: as good as new (ex-display), Year of construction: 2023, functionality: fully functional, grinding width: 1,350 mm, SCM Wide Belt Calibration and Fine Sanding Machine Model: dmc sd 60 RCS 135 Technical Specifications: Working width: 1,100 mm Min./max. working height: 4–170 mm Abrasive belt width: 1,120 mm Abrasive belt length: 2,150 mm Main motor power: 11 (15) kW (HP) Gear motor: 0.45/0.8 (0.6/1.1) kW (HP) Feed speed: 4.5/9 m/min Standard equipment: - R140/85 rubber-coated calibration roller, diameter 140 mm, 85 Shore - 1st position - R160/45 rubber-coated sanding roller, diameter 160 mm, 45 Shore - 2nd position - Hard sanding pad with manual working height adjustment - Motor power for unit 1: 11 kW (15 HP) - Electronic ammeter for main motor indicating current draw - Electronic work height display - Electronically controlled sanding belt oscillation - Rubber pressure rollers - Anti-kickback device at infeed before first unit - 60 Shore rubber feed belt - Roller table with two rollers at infeed and outfeed of working table - Feed belt with two speeds 4.5 / 9 m/min driven by gear motor - Automatic belt centering Including the following special accessories: 1 pc. version "B" for RCS with: pneumatic on/off for roller 1st unit “R” + pneumatic on/off for roller 2nd unit “CS” + “MESAR” elastic segmented sanding pad + pneumatic on/off for sanding pad unit + electronic programming unit “LOGIC 50” + electronic working height adjustment 1 pc. CE safety standards 1 pc. roller table at infeed and outfeed for long workpieces, equipped with 5 non-driven rollers 1 pc. "RA" diagonally grooved steel contact roller, 1st unit 1 pc. main motor 15 kW 1 pc. abrasive belt wear optimizer 1 pc. LED interior lighting 1 pc. door with viewing window on rear side 1 pc. Logic SC control Hfedpetwqn Ssfx Ahnsi

Condition: reconditioned (used), Year of construction: 1987, functionality: fully functional, machine/vehicle number: 9673240, grinding width: 1,100 mm, power: 15 kW (20.39 HP), height adjustment type: electric, grinding belt length: 1,900 mm, compressed air connection: 6 bar, grinding belt width: 1,120 mm, Combination sanding unit with contact roller and air sanding pad Brush roller Pneumatic sanding belt tensioning Motorized thickness adjustment Technical data max. working width 1100 mm max. workpiece thickness 150 mm min. workpiece thickness 3 mm Hfodpfotppzvex Ahnji Sanding belt dimensions 1900 x 1120 mm Feed speed 5/10 m/min. Motor power sanding unit 15 kW Motor power height adjustment 0.50 kW Motor power feed carpet 0.5/1.0 kW Operating pressure 6 bar Air consumption approx. 20 l/min Suction nozzle 2 x 200 mm Weight approx. 2100 kg Machine width approx. 1750 mm Machine depth approx. 1700 mm Machine height approx. 1900 mm

Condition: reconditioned (used), machine/vehicle number: 10728, functionality: fully functional, Table size: 2300 x 900 mm. Hedpfxoiyp Rfs Ahnjfi

Condition: used, Year of construction: 2021, Oil Application Machine LW100.6/300 Two-Roller Machine – Roller width: 300 mm, material passage up to 80 mm. Oil application on top and bottom. Adjustable feed speed approx. 6–35 m/min. Motor 0.37 kW, 400 Volt, 50 Hz. CE certificate. Machine table working height 900 mm, powder-coated. Additional safety hood with adjustable pass-through thickness, with plexiglass insert. Non-driven roller conveyor 1300 mm, working height 900 mm, height adjustable. Storage location: Nattheim. Hfsdpexy Tmujfx Ahnei

Condition: excellent (used), Year of construction: 1995, functionality: fully functional, machine/vehicle number: 2435059, total length: 1,500 mm, total width: 700 mm, total height: 1,450 mm, table height: 900 mm, type of input current: three-phase, table length: 1,000 mm, table width: 280 mm, height adjustment type: electric, input voltage: 380 V, grinding belt length: 2,580 mm, grinding height: 150 mm, Enorm (now Kündig) edge sanding machine in very good, used condition. LBK-D/solid – manufactured in 1995. The edge sanding machine was purchased from a dealer in 2022. The machine is being sold as part of the closure of our carpentry business. Hfsdpoziupiefx Ahnji Price for pickup – delivery possible upon request. The sale is made with the exclusion of any warranty for defects. Liability for intent, gross negligence, as well as for damages resulting from injury to life, body, or health remains unaffected. Claims for defects that were fraudulently concealed also remain unaffected. An inspection of the machine is possible by arrangement. Fixed inspection dates are July 18th or August 1st from 10 a.m. to 2 p.m. at our facility in Stemwede.

Condition: used, Year of construction: 1997, Used machine Year of manufacture: 1997 1 belt sanding machine with combination unit with electronic segmented pressure bar for sanding soft and hard veneers Calibrating and fine sanding of solid wood Calibrating of workpiece carrier plates Sanding of defective veneers and coatings Intermediate sanding of PU, hydro, UV, nitro, and polyester coatings Sanding of barrier films with graphic operator terminal CNC-controlled thickness adjustment from 3-150 mm Activation of the calibrating roller via the terminal with patented CSD segmented pressure bar for compensation of workpiece tolerances up to 2 mm Sanding width 1100 mm Hjdpfxezk N Ddj Ahnofi Sanding belt length 2150 mm Sanding belt speed, frequency-controlled, approx. 2-18 m/sec Drive, sanding unit: 15 kW Feed rate: 5/10 m/min Compressed air: 6 bar Compressed air requirement: 15 NL/min with belt extraction: 490 l/min Extraction nozzle: 180 mm Air requirement, sanding unit: 1800 m³/h Required air velocity: 20 m/sec Total power connection: approx. 17 kW Weight: approx. 2000 kg Dimensions (W x D x H): 1840x1670x2200 mm The machine will be fitted with a new feed belt. Availability: short-term Location: Röllbach

Condition: used, Used machine Year of manufacture: 1988 Condition: well-maintained Equipment and technical data: - Length of work tables: 1440 mm - Total width of the two work tables: 710 mm - Inclination adjustment of the work tables: 0 to 30 degrees - Working pressure: 6 bar - Abrasive belt length: 2170 mm - Width of the abrasive belt: 150 mm - Speed of the abrasive belt: 10 to 20 m/sec - Vertical adjustment of the oscillating unit: 125 mm - Air consumption: 25 NL/min - Electrical supply: 400 V / 2.9 kW Weight: 490 kg Hfodpfx Aozk Ny Eehnei Availability: short notice Location: 63934 Röllbach

Condition: used, Year of construction: 1976, Used machine Year of manufacture: 1976 Equipment and technical data: - Underside sanding - Material feed via rubber rollers - Non-contact oscillation control - Quick-change pressure beam - Electromotive adjustment of the tool thickness with an easily readable digital display - Push-button control with contactor - Sanding width: 1350 mm - Maximum workpiece thickness: 150 mm - Sanding belt width: 1360 mm - Sanding belt length: 1900 mm - Feed rollers switchable: 10 + 20 m/min - Compressed air connection: 6 bar - Air requirement: approx. 180 NL/min - Motor power: 17.5 kW - Dimensions (W x D x H): 1800 x 1100 x 1520 mm - Weight: 2600 kg Availability: short notice Storage location: 63934 Röllbach Hfodszk Nyrjpfx Ahnsi

Condition: used, Year of construction: 1998, Used machine Year of manufacture: 1998 1 wide belt sander with combination unit Equipped with electronic segmented pressure bar For sanding of soft and hard veneers Calibration and fine sanding of solid wood Calibration of workpiece carrier boards Removal of defective veneers and coatings Intermediate sanding of PU, hydro, UV, nitrocellulose, and polyester coatings Sanding of blocking foils With graphical operator terminal NC-controlled thickness adjustment ranging from 3 to 150 mm Calibration roller can be engaged via terminal With patented CSD segmented pressure bar for compensation of workpiece tolerances up to 2 mm Hodezk Nxzopfx Ahnefi Sanding width: 1350 mm Sanding belt length: 2150 mm Sanding belt speed, frequency controlled, approx. 2–18 m/s Sanding unit drive: 15 kW Feed speed: 5/10 m/min Compressed air: 6 bar Compressed air consumption: 15 NL/min Belt blow-off: 490 l/min Extraction connection: 180 mm Air requirement for sanding unit: 1800 m³/h Required air velocity: 20 m/s Total power connection: approx. 17 kW Weight: approx. 2500 kg Dimensions (W x D x H): 2090 x 1670 x 2020 mm Machine will be supplied with a new feed belt Availability: by arrangement Location: Röllbach

Condition: used, Used machine Year of manufacture: 1981 Features and technical data: Motor 5.2/7.5 kW, pole-changeable 750/1500 rpm Belt speeds: 11 and 22 m/sec With attached blower motor 2.2 kW (2840 rpm, air flow 2400 m³/h) Table size: 2900 x 1400 mm Usable working length: 2700 mm Table stroke: 320 mm Belt dimensions: 7800 x 150 mm Including pneumatic pressure shoe with belt brake Extraction nozzle: 180 mm Hfsdpfx Aezk Nxnjhnoi Air requirement: 2 l/min at 6 bar Weight: 1300 kg Availability: short notice Location: Röllbach

Condition: used, Used machine Belt grinding machine Motor power: 4 hp / 3 kW Motor speed: 2890 rpm Table dimensions: approx. 2460 mm x 900 mm Manual table height adjustment Hjdpfxjzk Nvms Ahnefi Transport dimensions: approx. 3600 x 1600 x 1450 mm Weight: approx. 500 kg Availability: short notice Location: Röllbach

Condition: used, Used machine Condition: consistent with age Hsdpfxezk Ntxs Ahnjfi Table size: 2600 x 900 mm Max. usable grinding length: 2700 mm Belt length: 7800 mm x 150 mm 1100 mm throat on the right Motor: 5.2/7.5 kW with belt air blast nozzle Shipping dimensions: 4300x1650x1800 mm Weight: 1300 kg Availability: short term Location: Röllbach

Condition: used, Year of construction: 1983, Used machine Hsdpjzk Npmofx Ahnjfi Year of manufacture: 1983 Condition: fully checked and serviced, including new feed belt Equipment and technical data: - Including combination unit with contact roller and sanding pad - With height-adjustable contact roller for calibration - With air-cushion pressure pad controlled by the workpiece - 4-way adjustable grit compensation - With pneumatic belt tensioning device - With rotating cleaning brush on the outfeed side of the machine - Belt oscillation via photoelectric sensor for automatic monitoring and regulation of lateral belt alignment, ensuring uniform belt wear - With roller table at the infeed - With digital display unit for the motorized workpiece thickness setting - With additional veneer sanding pad - Including 2x spare sanding pads - Sanding width: 1350 mm - Sanding belt length: 1900 mm - Workpiece height: 150 mm - Main motor: 15 kW - Infinitely variable feed speed: 2.5 - 12.5 m/min - Extraction ports: 2 x 200 mm Dimensions: approx. 2300 x 2000 x 2300 mm Weight: approx. 2300 kg Availability: short-term Location: 63934 Röllbach