Condition: new, Year of construction: 2022, Belt width: 150mm Belt length: 2600mm Oscillation: yes Sanding rollers for curves: 1 Sanding unit can be swivelled: yes Bedeiuld Depfx Acvjlf Table size: 750mm x 290mm Suction connection: 120mm Motor power: 3kW Machine length: 1700mm Machine width: 700mm weight: 180kg

Condition: used, Year of construction: 1958, machine/vehicle number: 12S2013, functionality: unexamined, power: 4 kW (5.44 HP), input voltage: 380 V, input current: 9 A, grinding belt width: 150 mm, grinding belt length: 7,000 mm, grinding height: 400 mm, actuation type: electric, total height: 1,640 mm, total length: 3,800 mm, total width: 1,450 mm, Langzauner wide belt sanding machine Bedpfx Acoyxf Tysvjlf Factory No.: 12S2013 Year of manufacture: 1958 Power: 4 kW

Condition: like new (used), Year of construction: 2017, operating hours: 108 h, functionality: fully functional, working width: 1,650 mm, power: 370 kW (503.06 HP), type of input current: three-phase, workpiece height (max.): 160 mm, input frequency: 50 Hz, input voltage: 400 V, workpiece width (max.): 1,650 mm, space requirement length: 7,660 mm, COSTA LEVIGATRICI 1650 CALIBRATOR/SANDING MACHINE This machine is in really new condition with only approximately 100 hours of operation. It is fully functional and operates without any issues. Technical Specifications * Machine Type: Automatic sanding / calibration line * Working Width: 1650 mm * Feed System: Motorized conveyor belt with variable speed control * Working thickness: 3 to 160 mm Lower Section: * 3 sanding steel roller units * 1 finishing pad unit Blsdpfx Ajyt H Dnecvjf * Cleaning system with blowers and brushes Upper Section: * 3 sanding steel roller units * 1 finishing pad unit * Cleaning system with blowers and brushes Unit Power: * From 18.75 kW up to 75 kW (depending on the unit) Control System: * PLC control with touchscreen interface Safety: * Safety sensors * Emergency stop system

Condition: like new (used), DEMONSTRATION MACHINE For sale is an as-new JET double drum sander DDS-237, equipped with a powerful 400V motor with 7.5 HP and a maximum sanding width of 940 mm. This demonstration unit is in excellent condition. Technical Specifications - Motor: 400 V / 7.5 HP - Drum speed: 1,400 rpm Bsdpfx Acjycc R Novolf - Feed speed: 3 m/min - Maximum sanding width: 940 mm - Sanding thickness: 0.8 to 133 mm - Minimum workpiece length: 230 mm - Sanding drum dimensions: 152 x 940 mm each - Sanding belt width: 75 mm or 100 mm - Dust extraction port: 2 x diameter 100 mm - Dimensions (LxWxH): 1,090 x 1,420 x 1,090 mm - Weight: 440 kg The machine is located in A-5431 Kuchl and can be inspected at any time during our business hours. Subject to prior sale. Shipping via haulage company: Austria: €180.00 incl. VAT Germany: €210.00 incl. VAT South Tyrol: €240.00 incl. VAT Related terms: JET DDS-237, double drum sander, wide belt sanding technology, wood finishing, 7.5 HP drive, 400V industrial, 940 mm working width, feed system, workshop machine, professional sanding equipment Reference: R-A0117

Condition: used, Year of construction: 2012, functionality: fully functional, working width: 1,100 mm, overall weight: 1,500 kg, power: 11 kW (14.96 HP), grinding belt speed: 18,500 mm/s, type of input current: three-phase, grinding belt length: 2,620 mm, workpiece height (max.): 160 mm, compressed air connection: 5.5 bar, grinding belt width: 1,100 mm, extraction nozzle diameter: 150 mm, input voltage: 400 V, operating pressure: 5 bar, pressure: 5.5 bar, workpiece width (max.): 1,100 mm, pass-through height: 160 mm, We are offering this used BULDOG 7 wide belt sander, year of manufacture 2012. Manufacturer: BULDOG Model: 7 Year: 2012 Condition: used Category ID: 1408 Type ID: 436 Machine type: Wide Belt Sander CE Safety Standard Wide belt sander/milling machine with a working width of 1100 mm The machine is in perfect working condition. The machine has a constant working height, making it ideal for integration into a production line with roller conveyors before and after the machine. Additional features: - Frequency inverter for the feed belt - Automatic feed belt tracking - Pneumatic interval air blasting system with oscillating nozzles for belt cleaning - Guide rails on both sides - Roller conveyors at the infeed and outfeed - Stroke of the shaft: 220 mm, adjustable from 80 mm up to 300 mm - Fixed machine table - Height adjustment via the sanding units - Up to 3 sanding units possible Working area: - Working width: 1,100 mm - Max. workpiece height: 160 mm - Min. workpiece height: 3 mm - Sanding belt length: 2,620 mm - Sanding belt speed: approx. 18.5 m/s - Feed speed: 3-15 m/min (stepless) - Motor power: approx. 11 kW - Power supply: 400 V - Operating pressure: approx. 5.5 bar - Air consumption: 50-300 l/min - Extraction speed: approx. 20 m/s - Extraction connection: 150 mm diameter - Weight: approx. 1,500 kg Applications: - Solid wood - Veneer Bedoyxqdkopfx Acvjlf - MDF/engineered wood panels - Lacquered and filled surfaces Disassembly and collection at buyer's own expense Pick-up location: A-8265 Kroisbach an der Feistritz If you have any questions or require further information, please feel free to send us a message or call us.

Condition: as good as new (ex-display), functionality: fully functional, grinding height: 200 mm, power: 11.03 kW (15.00 HP), grinding belt speed: 18,000 mm/s, grinding belt length: 2,620 mm, grinding belt width: 1,370 mm, input frequency: 50 Hz, input voltage: 400 V, Additional technical data Feed speed: 2.8 - 20 m/min The new Format4 findustry wide belt sanders impress in industrial applications primarily through their individually configurable assembly of units. Tailored specifically to the application and field of use, the machine can be equipped with two, three, or four units. A high degree of customization guarantees that all requirements in terms of surface finish and processing efficiency are met. Maximum operating comfort in industrial applications The clearly structured touchscreen control panel is intuitive to operate. All machine functions are clearly displayed graphically on the digital display. The pass-through thickness can be set directly from the control panel to a tenth of a millimeter at the touch of a button. Automatic thickness measurement simplifies the adjustment of the machine to the desired workpiece thickness. The workpiece can be measured without additional measuring devices, and its thickness is then transmitted directly to the machine "wirelessly." The fixed infeed table height of 900 mm allows for easy and fatigue-free operation, while a vacuum table, roller table extensions on both infeed and outfeed sides, as well as optional pressure shoes on the sanding units, ensure maximum comfort and optimal processing conditions for workpieces of any size. Optional equipment 10E LACQUER – Cross sanding unit ESC in place of 1st contact roller 20A 2nd contact roller unit 22 2nd sanding roller in 85° Shore 30E LACQUER – Superfinish unit ESC in place of 3rd contact roller 39 Switch contact for slide control (price/piece) *6 Blodpfextpydex Acvjf 51 Soft start for 15kW (20HP motor) 59B Control unit with 15" color touchscreen display 63 Scotch-Brite brushing device at the machine outfeed 71 Oscillating cleaning blower for workpiece and conveyor belt 72 Ionizing bar at the machine outfeed 73 Vacuum table with 4kW (5.5 HP) blower 74 Inverter for vacuum blower for vacuum adjustment 83 Sanding height 200mm instead of 170mm 84 Optimized control software for special processing 87 ESC workpiece detection sensor with 50 segments 201 2nd motor with 15kW power output Additional information Workpiece height: 3 - 170 mm Constant infeed height - fixed table: 900 mm Grooved sanding roller: Ø 250 mm Including delivery and installation in post code areas 71, 72, 73, 77, 78, 79, 86, 87, 88, 89

Condition: as good as new (ex-display), functionality: fully functional, grinding width: 1,100 mm, grinding height: 170 mm, power: 14.71 kW (20.00 HP), grinding belt length: 1,900 mm, grinding belt width: 1,100 mm, input frequency: 50 Hz, input voltage: 400 V, Further technical data: Sanding height: 3 - 170 mm Extraction connection: 200 / 120 mm Standard equipment: - Star-delta starter - CE safety standards - Electrically controlled height adjustment of the feed table including fine adjustment from the control panel - Stepless feed speed from 2.5-18 m/min adjustable via inverter from the control panel - Hand guard and workpiece thickness safety device - Endless belt conveyor with honeycomb structure - Automatic feed belt centering - Control unit with 7" touch color display - 1st unit with rubberized, profiled contact roller, 85° Shore hardness - 2nd unit (sanding pad unit): The electro-pneumatic segmented sanding shoe with 25 mm segment width enables the independent processing of multiple workpieces for perfect veneer sanding. The standard time-controlled cleaning blower ensures maximum sanding belt service life, especially for lacquer sanding or very fine grit. - Digital grit compensation - Mechanically preloaded rubber pressure rollers - Sanding belt oscillation, electronic-pneumatic - Electronic sanding belt run-off protection - 1 motor with 15 kW (20 HP) including automatic star-delta start - Min. air pressure (bar): 6 Optional equipment: - Vacuum table with integrated blower in the machine frame - 15 kW (20 HP) motor including variable cutting speed from 2.4 to 19 m/sec Bledpfovf D S Ajx Acvef - Double-sided roller table extension, 200 mm - Scotch Brite brush unit at the machine outfeed, D=150 mm - Switching contact for slide valve control; shut-off valves for extraction can thus be actuated. Including delivery and installation in postcode areas 71, 72, 73, 77, 78, 79, 86, 87, 88, 89

Year of construction: 1999, condition: ready for operation (used), Table dimensions X/Y: 1000mm/350mm, grinding belt length: 2600mm, grinding belt width: 150mm, belt speed: 20m/min, grinding beam swivel range: 90°, machine dimensions X/Y: 1650mm/900mm, weight: approx. 300kg. An inspection on site is possible. Bsdpfx Aeyrg Hgjcvslf

Condition: used, machine/vehicle number: 008400, Max. machining width: 1350 mm Working Table: Fixed pass height No. Operating units: 4 Nr Blsdpfx Ajywafbecvef

Condition: used, machine/vehicle number: 007984, Max. machining width: 1300 mm Min. machining thickness: 4 mm Bedpfx Acowqdbmsvelf Working Table: Fixed pass height Vacuum feed belt: yes No. Operating units: 4 Nr

Condition: excellent (used), Year of construction: 2002, machine/vehicle number: AE700472 Ref: 111810, 1350m/m Wide Belt Sander with 3 Sanding Rollers Calibrating and Sanding machine In very good condition. Electronic Control Unit. Capacity 1350m/m wide. Very good HP. With at least 5 boxes of Cloth Backed Sanding Belts 40/60 & 80 Grit. Price of STG £15,000.00 Includes loading buyers transport. Bedjt Iwgujpfx Acvolf Location: Burrowbridge, Somerset TA7 0SG UK Photos available on WhatsApp

Condition: good (used), Year of construction: 1999, functionality: fully functional, Through-feed sander top and bottom, width 300 mm. Roller, roller-shoe. Blsdpjyc Nfysfx Acvjf

Condition: good (used), Code: 0308 Brand: AGLA Model: 900 Roll polishing machine for polyester and varnish - It is suitable for buffing of high gloss polyester or polyurethane paints, metals, marble and similar materials Blodpfxsympwqe Acvsf Sturdy structure Table dimensions mm 2950 x 850 Working width mm 900 Working height mm 700 Brush diameter mm 300 Motor Hp 10 Automatic table lifting Overall dimensions mm 3100 x 1750 x 1650 h

Condition: ready for operation (used), A two-unit sanding machine Sandingmaster is available. Working width: 1100mm, max. workpiece width: 1000mm, max. workpiece height: 150mm, sanding belt dimensions X/Y: 1130mm/1900mm, feed: 14m/min. Machine dimensions X/Y/Z: approx. 3150mm/1500mm/1900mm, weight: approx. 2500kg. Including approximately 50 sanding belts with different crownings. Documentation available. An on-site inspection is possible. Bjdpfsyq R Hhex Acvslf

Condition: excellent (used), Belt grinding machine HOLZKRAFT LBSM 2505 - used - Grinding belt cover, Right-/left-hand rotation, Swiveling grinding unit ----- Technical data ----- Table size: 2,400 x 800 mm, Throat depth: 650 mm, Motor: 3 kW, Grinding belt dimensions (LxW): 150 x 6,400 mm Quality information: - Belt tracking checked - Grinding shoe checked - Height adjustment checked Bjdpfxeyfwcrj Acvolf - Grinding table guide checked - Complete basic cleaning performed - Electrical system checked - Immediately ready for operation

Condition: excellent (used), Wide Belt Sander SCM Casadei Libra 30 Model – Libra 30 Sanding width: 950 mm Max material height: 170 mm 2 sanding units (1 x steel roller, 1 x combination unit) Finishing pad 15 kW motor, star/delta starting Two feed speeds Electric table adjustment Bodpfx Ajyv D A Iecvolf Table position display Oscillation with photocell control The sander is in very good condition, fully operational and ready for work Weight approx. 1100 kg

Condition: good (used), Year of construction: 1997, functionality: not functional, machine/vehicle number: TR206 10 1997, total width: 1,100 mm, total height: 150 mm, working width: 1,100 mm, workpiece weight (max.): 150 kg, power: 27.77 kW (37.76 HP), height adjustment type: electric, table width: 1,065 mm, operating pressure: 6 bar, Sandingmaster CSB2 1100m/m wide Roller & Pad Calibrating & Fine Sanding machine. Both 80* Shore hardness. Sandomatic Setting System. Ampmeters on both motors. Feed Motor 2 Speed 7 & 14m/min. Bodpsx Hr Dhsfx Acvslf Sanding belt dimensions: 1900 x 1130m/m. Operator manual available. Weight: Approx 3500kg. Complete with Sanding Belts: 80, 100 & 120 grit. Photos on WhatsApp.

Condition: excellent (used), total motor power 9 kW two sanding units plus milling unit pneumatic pads Bedpfx Acsylanqsvolf brush variable feed regulated by variator mechanical oscillation height adjustment via remote control CE marking year of manufacture 2003 400 V

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 4650x2230x2135 mm Bljdsvz Epuopfx Acvjf Weight 5800 kg Total power requirement 19,8 kw

Condition: excellent (used), CATALOG NO. 7728 TECHNICAL DATA - Workpiece length: 2800mm - Workpiece width: 1250mm - Main motor: 5.5kW - Sanding belt width: 150mm - Belt air cleaning - Pneumatic hold-down - Right/left rotation - Electric table height adjustment up/down - Extraction port diameter: 180mm - Overall dimensions (L/W/H): 3950x1500x1450mm - Weight: approx. 700kg ADVANTAGES – Unpainted – Electric table adjustment – Belt air cleaning – Pneumatic hold-down – Used sander, in very good condition Net price: 8,900 PLN Net price: 2,120 EUR (based on exchange rate 4.2 EUR) (Prices may change with significant fluctuations) Bljdpfxjya Hmvj Acvef

Condition: excellent (used), CATALOG NUMBER 6929 TECHNICAL DATA - Workpiece length: 2800 mm - Workpiece width: 950 mm - Main motor: 5.5 kW - Fan motor: 2.2 kW - Sanding belt width: 160 mm - Extraction port diameter: 185 mm - Right/left rotation - Overall dimensions (L/W/H): 4080x1800x1400 mm - Weight: approx. 1000 kg ADVANTAGES – Not repainted – German manufacture – DTR technical documentation – Used sander, very good condition Bjdpjx Swuijfx Acvslf Net price: 8,900 PLN Net price: 2,120 EUR Net price calculated at the exchange rate of 4.2 PLN/EUR (The price may change in case of larger exchange rate fluctuations)

Condition: good (used), Year of construction: 1972, functionality: fully functional, grinding belt width: 120 mm, grinding height: 1,000 mm, total length: 2,100 mm, total width: 800 mm, Well-maintained wide belt sander with a 120 mm wide sanding shoe and internal fan. Two selectable speeds. Table and sanding shoe move very smoothly. Sanding area 2100 mm x 800 mm. Bedpfx Asyl Saxocvslf

Condition: excellent (used), Catalogue number 7733 TECHNICAL DATA - Belt width: 150mm Bjdpsya Hm Nefx Acvjlf - Oscillation - Vertical oscillation movement - 2 rotation speeds - Work table: 1180x370mm - Work table adjustment: up/down, front/back and at an angle - Motor: 3kW - Platen - for precise grinding - With fan - Effective sanding length on belt: 700mm - Top/bottom milling cutters for edge chamfering - Extraction port diameter: 70mm - Dimensions (L/W/H): 1550/1400/1300mm - Weight: 490kg ADVANTAGES – with oscillation – with platen – with fan – includes milling cutters for edge processing/chamfering – for both curvilinear and straight sanding – unpainted – used machine, in very good condition Net price: 7500 PLN Net price: 1780 EUR (based on exchange rate 4.2 EUR) (Prices may vary with greater rate fluctuations)

Condition: excellent (used), CATALOG NO. 6985 TECHNICAL DATA - Max workpiece width: 300 mm - Max workpiece height: 200 mm - Unit: grooved rubber roller + pad + metal roller Bjdpfsx Swu Ajx Acvelf - Working table: 1230x440 mm - Belt: 300x1900 mm From above: - Rubber slip roller - Unit approx. 7.5 kW - Rubber slip roller From below: - Traction belt - Pneumatic oscillation - 2 feed speeds - Feed motor 0.85 kW - Extraction port diameter: 110 mm - Dimensions (L/W/H): 1250/1000/1950 mm - Weight: 530 kg - Not painted - Used sander - Very good condition Net price: 13,900 PLN Net price: 3,300 EUR Net price calculated at exchange rate 4.2 PLN/EUR (In case of greater exchange rate fluctuations, the price may change)

Condition: excellent (used), CATALOG NUMBER 7037 TECHNICAL DATA - Workpiece length: 2780 mm - Workpiece width: 800 mm - Main motor: 4 kW - Sanding belt width: 150 mm - Fan - Forward/reverse rotation - Electrical table height adjustment (up/down) - Extraction port diameter: 140 mm - Overall dimensions (L/W/H): 3760x1440x1520 mm - Weight: 502 kg ADVANTAGES – Not repainted – With fan Blsdpfx Acjx Swvajvof – Electric table adjustment – Used sander, very good condition Net price: 9500 PLN Net price: 2260 EUR Net price calculated at an exchange rate of 4.2 PLN/EUR (In case of significant currency fluctuations, the price may change)